Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0907.2549 · Physical Review A

Dynamics of dispersive single-qubit readout in circuit quantum electrodynamics

R. Bianchetti, Stefan Filipp, Matthias Baur, J. M. Fink, M. Göppl, Peter Leek, L. Steffen, Alexandre Blais, Andreas J. Wallraff

Published Oct 30, 2009• 81 citations
arXivHTMLPDF

Abstract

The quantum state of a superconducting qubit nonresonantly coupled to a transmission line resonator can be determined by measuring the quadrature amplitudes of an electromagnetic field transmitted through the resonator. We present experiments in which we analyze in detail the dynamics of the transmitted field as a function of the measurement frequency for both weak continuous and pulsed measurements. We find excellent agreement between our data and calculations based on a set of Bloch-type differential equations for the cavity field derived from the dispersive Jaynes-Cummings Hamiltonian including dissipation. We show that the measured system response can be used to construct a measurement operator from which the qubit population can be inferred accurately. Such a measurement operator can be used in tomographic methods to reconstruct single and multiqubit states in ensemble-averaged measurements.

DOI
10.1103/physreva.80.043840

Related papers

Dispersive Measurement of Superconducting Qubits

Mostafa Khezri

Quantum computers have the capability to improve the efficiency and speed of many computational tasks. Among different candidates for physical implementation of quantum bits (qubits), superconducting qubits are currently one of the most promising candidates due to their accessible fabrication process and recent rapid developments. Measurement of these qubits is usually done in a circuit quantum electrodynamics (QED) setup, for which experimental and theoretical research is conducted to improve the accuracy and speed of the qubit readout. In this dissertation we study some aspects of the dispersive readout of superconducting qubits, and introduce tools and methods for studying these systems.In Chapter 2 we show that in presence of neighboring qubits, the system is typically measured in the basis of joint eigenstates of qubits, in contrast to what is expected from the textbook collapse postulate. In such setups, the excitation can switch between the eigenstates, leading to measurement error. In Chapter 3 we study the joint state of the qubit-resonator system during the measurement, and show that the qubit-induced nonlinearity of the resonator squeezes its state, and within the rotating wave approximation (RWA) the system mostly remains in the joint eigenladder that is associated with the qubit's initial state. In Chapter 4 we show that built-in energy resonances in the qubit-resonator Jaynes-Cummings ladder occur at specific resonator populations, and the couplings between these resonant levels are provided by the usually neglected non-RWA terms. Such resonances lead to measurement deterioration by exciting the qubit out of the computational subspace. In Chapter 5 we provide a hybrid phase-space-Fock-space approach for studying the evolution and squeezing of driven nonlinear resonators within Gaussian approximation, which is numerically efficient and sufficiently accurate. In Chapter 6 we study the propagating squeezed field that leaks out of the resonator, and write evolution equations for the correlators of the measured field quadrature. These equations are easy to simulate and can describe the squeezing of the propagating field during the transient, which can be used to optimize the fidelity and speed of the quadrature measurement in the dispersive readout of superconducting qubits.

•Jan 1, 2018•5 citations

Catch-Disperse-Release Readout for Superconducting Qubits

Eyob Alebachew Sete, Andrei Galiautdinov, Eric Mlinar +2 more

We analyze a single-shot readout for superconducting qubits via the controlled catch, dispersion, and release of a microwave field. A tunable coupler is used to decouple the microwave resonator from the transmission line during the dispersive qubit-resonator interaction, thus circumventing damping from the Purcell effect. We show that, if the qubit frequency tuning is sufficiently adiabatic, a fast high-fidelity qubit readout is possible, even in the strongly nonlinear dispersive regime. Interestingly, the Jaynes-Cummings nonlinearity leads to the quadrature squeezing of the resonator field below the standard quantum limit, resulting in a significant decrease of the measurement error.

arXiv:1302.7020•Physical Review Letters•May 22, 2013•33 citations

Orthogonally-Driven Superconducting Qubit in Circuit QED

M. J. Storcz, M. Mariantoni, H. Christ +6 more

We consider a superconducting charge qubit coupled to distinct orthogonal electromagnetic field modes belonging to a coplanar wave guide and a microstrip transmission line resonators. This architecture allows the simultaneous implementation of a Jaynes-Cummings and anti-Jaynes-Cummings dynamics, a resonant method for generating mesoscopic qubit-field superpositions and for field-state reconstruction. Furthermore, we utilize this setup to propose a field measurement technique that is, in principle, robust to qubit dephasing and field relaxation due to a fast pre-measurement.

arXiv:cond-mat/0612226•Dec 10, 2006•6 citations

Measurement and Quantum State Transfer in Superconducting Qubits

Eric Mlinar

The potential of superconducting qubits as the medium for a scalable quantum computer has motivated the pursuit of improved interactions within this system. Two challenges for the field of superconducting qubits are measurement fidelity, to accurately determine the state of the qubit, and the efficient transfer of quantum states. In measurement, the current state-of-the-art method employs dispersive readout, by coupling the qubit to a cavity and reading the resulting shift in cavity frequency to infer the qubit's state; however, this is vulnerable to Purcell relaxation, as well as being modeled off a simplified two-level abstraction of the qubit. In state transfer, the existing proposal for moving quantum states is mostly untested against non-idealities that will likely be present in an experiment. In this dissertation, we examine three problems within these two areas.We first describe a new scheme for fast and high-fidelity dispersive measurement specifically designed to circumvent the Purcell Effect. To do this, the qubit-resonator interaction is turned on only when the resonator is decoupled from the environment; then, after the resonator state has shifted enough to infer the qubit state, the qubit-resonator interaction is turned off before the resonator and environment are recoupled. We also show that the effectiveness of this ``Catch-Disperse-Release'' procedure partly originates from quadrature squeezing of the resonator state induced by the Jaynes-Cummings nonlinearity.The Catch-Disperse-Release measurement scheme treats the qubit as a two-level system, which is a common simplification used in theoretical works. However, the most promising physical candidate for a superconducting qubit, the transmon, is a multi-level system. In the second work, we examine the effects of including the higher energy levels of the transmon. Specifically, we expand the eigenstate picture developed in the first work to encompass multiple qubit levels, and examine the resulting changes to the system. In particular, we analyze the population of the non-target eigenstates as a result of this expanded model, and provide an analytical form for these deviations from the simpler model in Catch-Disperse-Release (i.e., the dressed state approximation).Lastly, we assess the robustness of the existing quantum state transfer protocol, testing its performance under typical experimental deviations from the ideal case. We show that the procedure is resilient to almost all non-idealities, except frequency mismatch between the two cavities. We also demonstrate a method to compensate for one such error in frequency-matching.

•Jan 1, 2016•0 citations

Quantum Control and Measurement in Circuit Electrodynamics and Circuit Optomechanics

Jiahe Pan

Circuit quantum electrodynamics (cQED), exemplified by a coupled system of a superconducting qubit and a microwave cavity, is a powerful framework for the quantum control and measurement of macroscopic quantum states in solid-state circuits. Quantum circuits based on superconducting qubits have emerged as one of the leading platforms in the pursuit of fault-tolerant quantum computing. Despite significant progress in extending qubit lifetimes, refining experimental protocols, and scaling up quantum processors, errors arising from the control and measurement of superconducting qubits continue to hinder the realization of a universal quantum computer. To investigate the error mechanisms for state-of-the-art qubits, we realize long-lived superconducting transmon qubits that exhibit fluctuating lifetimes, with an average of 0.2 ms and a maximum exceeding 0.4 ms. We then investigate their dominant error mechanism. By introducing novel time-resolved error measurements that are synchronized with the operation of the pulse tube cooler in a dilution refrigerator, we find that mechanical vibrations from the pulse tube induce nonequilibrium dynamics in highly coherent qubits, leading to their correlated bit-flip errors. Our findings not only deepen our understanding of qubit error mechanisms but also provide valuable insights into potential error-mitigation strategies for achieving fault tolerance by decoupling superconducting qubits from their mechanical environments. We also present a novel scheme for operating a cQED system in a regime where the cavity is largely displaced. We find that a qubit drive at the bare cavity frequency can effectively displace the cavity field while minimizing the cavity-drive-induced dephasing and the ac Stark shift. Furthermore, we demonstrate that standard cQED protocols, such as qubit control, readout, and cavity single-photon generation, remain compatible with largely displaced cavity fields, even beyond the critical photon number. These findings open new pathways for exploring cQED dynamics in large-photon-number regimes, including the study of nonlinear phenomena in microwave cavities, the saturation of two-level system baths for extending the coherence of microwave quantum states, and the acceleration of the dispersive readout. Finally, mechanical resonators have emerged as integral components in quantum computing for storing and transducing quantum information. Low-frequency mechanical resonators, with extremely low energy dissipation rates, are particularly interesting for extending the lifetimes of stored quantum information. However, integrating low-frequency mechanical resonators with qubits is challenging because their small energy gaps make coherent energy exchange and ground-state preparation difficult. In this thesis, we report the first steps towards the characterization of a hybrid quantum device, consisting of a Transmon qubit and a circuit optomechanical system, both coupled to a 3D microwave cavity.

•Jan 1, 2026•0 citations

First-principles study of dispersive readout in circuit QED

Angela Riva, Prakritish Gogoi, Nicolas Gheeraert +4 more

The speed and fidelity of dispersive readout of superconducting qubits should improve by increasing the amplitude of the measurement drive. Experiments show, however, that beyond some drive amplitude there is always a saturation or drop in fidelity, often associated with a decrease in qubit energy relaxation time $T_1$. A simple Lindblad master equation does not capture the latter effect. More involved approaches based on effective master equations rely on strong assumptions about the spectra of the system and the bath and only partially agree with observations. Here, we perform a first-principles simulation of the full unitary dynamics of dispersive readout by considering the circuit QED Hamiltonian coupled to a microscopic model for the measurement transmission line, allowing for its arbitrary spectrum, including filters. Our access to the dynamics of the bath degrees of freedom allows us to investigate the emission spectrum of the system as a function of drive power. We show how the dependence of qubit $T_1$ on readout drive amplitude is sensitive to the details of the bath spectrum. In particular, we find that $T_1$ drops with increasing drive amplitude when a Purcell notch filter is placed at the qubit frequency, and that the Lindblad master equation shows general qualitative defects compared to the first-principles model.

quant-pharXiv:2604.11722•Apr 14, 2026•2 citations
The quantum state of a superconducting qubit nonresonantly coupled to a transmission line resonator can be determined by measuring the quadrature amplitudes of an electromagnetic field transmitted through the resonator. We present experiments in which we analyze in detail the dynamics of the transmitted field as a function of the measurement frequency for both weak continuous and pulsed measurements. We find excellent agreement between our data and calculations based on a set of Bloch-type differential equations for the cavity field derived from the dispersive Jaynes-Cummings Hamiltonian including dissipation. We show that the measured system response can be used to construct a measurement operator from which the qubit population can be inferred accurately. Such a measurement operator can be used in tomographic methods to reconstruct single and multiqubit states in ensemble-averaged measurements.
Quantum computers have the capability to improve the efficiency and speed of many computational tasks. Among different candidates for physical implementation of quantum bits (qubits), superconducting qubits are currently one of the most promising candidates due to their accessible fabrication process and recent rapid developments. Measurement of these qubits is usually done in a circuit quantum electrodynamics (QED) setup, for which experimental and theoretical research is conducted to improve the accuracy and speed of the qubit readout. In this dissertation we study some aspects of the dispersive readout of superconducting qubits, and introduce tools and methods for studying these systems.In Chapter 2 we show that in presence of neighboring qubits, the system is typically measured in the basis of joint eigenstates of qubits, in contrast to what is expected from the textbook collapse postulate. In such setups, the excitation can switch between the eigenstates, leading to measurement error. In Chapter 3 we study the joint state of the qubit-resonator system during the measurement, and show that the qubit-induced nonlinearity of the resonator squeezes its state, and within the rotating wave approximation (RWA) the system mostly remains in the joint eigenladder that is associated with the qubit's initial state. In Chapter 4 we show that built-in energy resonances in the qubit-resonator Jaynes-Cummings ladder occur at specific resonator populations, and the couplings between these resonant levels are provided by the usually neglected non-RWA terms. Such resonances lead to measurement deterioration by exciting the qubit out of the computational subspace. In Chapter 5 we provide a hybrid phase-space-Fock-space approach for studying the evolution and squeezing of driven nonlinear resonators within Gaussian approximation, which is numerically efficient and sufficiently accurate. In Chapter 6 we study the propagating squeezed field that leaks out of the resonator, and write evolution equations for the correlators of the measured field quadrature. These equations are easy to simulate and can describe the squeezing of the propagating field during the transient, which can be used to optimize the fidelity and speed of the quadrature measurement in the dispersive readout of superconducting qubits.
We analyze a single-shot readout for superconducting qubits via the controlled catch, dispersion, and release of a microwave field. A tunable coupler is used to decouple the microwave resonator from the transmission line during the dispersive qubit-resonator interaction, thus circumventing damping from the Purcell effect. We show that, if the qubit frequency tuning is sufficiently adiabatic, a fast high-fidelity qubit readout is possible, even in the strongly nonlinear dispersive regime. Interestingly, the Jaynes-Cummings nonlinearity leads to the quadrature squeezing of the resonator field below the standard quantum limit, resulting in a significant decrease of the measurement error.
We consider a superconducting charge qubit coupled to distinct orthogonal electromagnetic field modes belonging to a coplanar wave guide and a microstrip transmission line resonators. This architecture allows the simultaneous implementation of a Jaynes-Cummings and anti-Jaynes-Cummings dynamics, a resonant method for generating mesoscopic qubit-field superpositions and for field-state reconstruction. Furthermore, we utilize this setup to propose a field measurement technique that is, in principle, robust to qubit dephasing and field relaxation due to a fast pre-measurement.
The potential of superconducting qubits as the medium for a scalable quantum computer has motivated the pursuit of improved interactions within this system. Two challenges for the field of superconducting qubits are measurement fidelity, to accurately determine the state of the qubit, and the efficient transfer of quantum states. In measurement, the current state-of-the-art method employs dispersive readout, by coupling the qubit to a cavity and reading the resulting shift in cavity frequency to infer the qubit's state; however, this is vulnerable to Purcell relaxation, as well as being modeled off a simplified two-level abstraction of the qubit. In state transfer, the existing proposal for moving quantum states is mostly untested against non-idealities that will likely be present in an experiment. In this dissertation, we examine three problems within these two areas.We first describe a new scheme for fast and high-fidelity dispersive measurement specifically designed to circumvent the Purcell Effect. To do this, the qubit-resonator interaction is turned on only when the resonator is decoupled from the environment; then, after the resonator state has shifted enough to infer the qubit state, the qubit-resonator interaction is turned off before the resonator and environment are recoupled. We also show that the effectiveness of this ``Catch-Disperse-Release'' procedure partly originates from quadrature squeezing of the resonator state induced by the Jaynes-Cummings nonlinearity.The Catch-Disperse-Release measurement scheme treats the qubit as a two-level system, which is a common simplification used in theoretical works. However, the most promising physical candidate for a superconducting qubit, the transmon, is a multi-level system. In the second work, we examine the effects of including the higher energy levels of the transmon. Specifically, we expand the eigenstate picture developed in the first work to encompass multiple qubit levels, and examine the resulting changes to the system. In particular, we analyze the population of the non-target eigenstates as a result of this expanded model, and provide an analytical form for these deviations from the simpler model in Catch-Disperse-Release (i.e., the dressed state approximation).Lastly, we assess the robustness of the existing quantum state transfer protocol, testing its performance under typical experimental deviations from the ideal case. We show that the procedure is resilient to almost all non-idealities, except frequency mismatch between the two cavities. We also demonstrate a method to compensate for one such error in frequency-matching.
Circuit quantum electrodynamics (cQED), exemplified by a coupled system of a superconducting qubit and a microwave cavity, is a powerful framework for the quantum control and measurement of macroscopic quantum states in solid-state circuits. Quantum circuits based on superconducting qubits have emerged as one of the leading platforms in the pursuit of fault-tolerant quantum computing. Despite significant progress in extending qubit lifetimes, refining experimental protocols, and scaling up quantum processors, errors arising from the control and measurement of superconducting qubits continue to hinder the realization of a universal quantum computer. To investigate the error mechanisms for state-of-the-art qubits, we realize long-lived superconducting transmon qubits that exhibit fluctuating lifetimes, with an average of 0.2 ms and a maximum exceeding 0.4 ms. We then investigate their dominant error mechanism. By introducing novel time-resolved error measurements that are synchronized with the operation of the pulse tube cooler in a dilution refrigerator, we find that mechanical vibrations from the pulse tube induce nonequilibrium dynamics in highly coherent qubits, leading to their correlated bit-flip errors. Our findings not only deepen our understanding of qubit error mechanisms but also provide valuable insights into potential error-mitigation strategies for achieving fault tolerance by decoupling superconducting qubits from their mechanical environments. We also present a novel scheme for operating a cQED system in a regime where the cavity is largely displaced. We find that a qubit drive at the bare cavity frequency can effectively displace the cavity field while minimizing the cavity-drive-induced dephasing and the ac Stark shift. Furthermore, we demonstrate that standard cQED protocols, such as qubit control, readout, and cavity single-photon generation, remain compatible with largely displaced cavity fields, even beyond the critical photon number. These findings open new pathways for exploring cQED dynamics in large-photon-number regimes, including the study of nonlinear phenomena in microwave cavities, the saturation of two-level system baths for extending the coherence of microwave quantum states, and the acceleration of the dispersive readout. Finally, mechanical resonators have emerged as integral components in quantum computing for storing and transducing quantum information. Low-frequency mechanical resonators, with extremely low energy dissipation rates, are particularly interesting for extending the lifetimes of stored quantum information. However, integrating low-frequency mechanical resonators with qubits is challenging because their small energy gaps make coherent energy exchange and ground-state preparation difficult. In this thesis, we report the first steps towards the characterization of a hybrid quantum device, consisting of a Transmon qubit and a circuit optomechanical system, both coupled to a 3D microwave cavity.
The speed and fidelity of dispersive readout of superconducting qubits should improve by increasing the amplitude of the measurement drive. Experiments show, however, that beyond some drive amplitude there is always a saturation or drop in fidelity, often associated with a decrease in qubit energy relaxation time T1T_1T1​. A simple Lindblad master equation does not capture the latter effect. More involved approaches based on effective master equations rely on strong assumptions about the spectra of the system and the bath and only partially agree with observations. Here, we perform a first-principles simulation of the full unitary dynamics of dispersive readout by considering the circuit QED Hamiltonian coupled to a microscopic model for the measurement transmission line, allowing for its arbitrary spectrum, including filters. Our access to the dynamics of the bath degrees of freedom allows us to investigate the emission spectrum of the system as a function of drive power. We show how the dependence of qubit T1T_1T1​ on readout drive amplitude is sensitive to the details of the bath spectrum. In particular, we find that T1T_1T1​ drops with increasing drive amplitude when a Purcell notch filter is placed at the qubit frequency, and that the Lindblad master equation shows general qualitative defects compared to the first-principles model.