Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Frontiers in Optics

Laser Cooled Strontium Ion Source

Mary Lyon, James L. Archibald, Christopher Erickson, Dallin Durfee

Published Jan 1, 2010• 0 citations
Publisher

Abstract

We present a cold strontium ion source consisting of a magneto-optical trap (MOT) modified to create a Low Velocity Intense Source (LVIS). The slow beam of atoms is photo-ionized to produce a velocity-tunable ion source.
DOI
10.1364/fio.2010.jtua64

Related papers

Development of a Strontium-87 Ion Interferometer

Christopher Erickson

I present the construction of a low-velocity intense source (LVIS) of laser-cooled neutral strontium using permanent ring magnets. The LVIS consists of a magneto-optical trap from which cold strontium is extracted in a well-collimated beam. I also present the development and implementation of a full suite of low-noise, high-bandwidth laser control electronics including a microcontroller unit. This microcontroller remotely controls and monitors the current driver, temperature controller, and PID lock circuit for each diode laser simultaneously. The current driver output is accurate to within 2 micro-amps and repeatable to with a few nano-amps. The noise spectral density of the current driver hits a floor of 10^(-10) amps per root Hz at ~50 Hz and has a modulation bandwidth of ~50 MHz. The PID lock-circuit includes a scan-balancing option that we have used to scan an AR coated laser diode ~30 GHz mode-hop free. I describe the construction of an 80 mW frequency doubled 461 nm laser system using PPKTP for cooling and trapping neutral strontium in the LVIS. The LVIS, the electronics systems, and the 461 nm laser system represent major milestones on the way to producing a matter-wave interferometer using Sr-87 ions. The interferometer is based on an optical Raman transition between the hyperfine ground states of the Sr-87 ion. The ions will be produced by exciting the strontium LVIS beam to an auto-ionizing state in the continuum. In the interferometer two half-pi pulses of light and one pi pulse will be delivered to the ions to split and recombine their wave functions. I present calculations of the predicted sensitivity and a discussion of the possible applications. I present a method for locking a 407.8 nm laser to the 5s doublet S J=1/2 to 5p doublet P J=3/2 strontium ion transition in a neutral vapor. I present calculations for the necessary vacuum levels for the experiment and describe the preparation and assembly of the vacuum apparatus. The major vacuum system consists of two connected elastomer sealed chambers: one at 10^(-7) Torr and the other at 10^(-10) Torr separated by a region of low conductance. I present a Sr vapor cell constructed from standard CF fittings that allows the strontium to be heated to ~730 C, which can also be run as a thermal beam. I present a method for protecting the viewports on small-form alkali-earth vapor cells using lead or indium foil during the evaporation of oxide layers. Finally, I report on the current status of the experiment as well as detail future work on the apparatus.

•Jan 1, 2011•1 citation

Magneto-optical trap loaded from a low-velocity intense source

Chang Yong Park, Myung Sim Jun, D. Cho

We produced a slow atomic beam of rubidium with a low-velocity intense source (LVIS) and loaded a magneto-optical trap (MOT) in a connected chamber with the beam. The hole for the atomic beam allowed us to keep the MOT chamber at a much lower pressure than that of the LVIS. The LVIS produced an atomic beam with a continuous flux of (4.3±0.4)×109/s and an average velocity of only 11±3 m/s. The MOT captured the atoms with 67±15% efficiency, which was limited by the atomic-beam divergence. The MOT held 6×109 atoms with a typical trap-confinement time of 8 s.

Journal of the Optical Society of America B•Jun 1, 1999•13 citations

A new design of a compact strontium cold-atom source

Dongyang Xu

A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.

•Jan 1, 2020•0 citations

Low-Velocity Intense Source of Atoms from a Magneto-optical Trap

Zheng‐Tian Lu, Kristan L. Corwin, Michael J. Renn +3 more

We have produced and characterized an intense, slow, and highly collimated atomic beam extracted from a standard vapor cell magneto-optical trap (MOT). The technique used is dramatically simpler than previous methods for producing very cold atomic beams. We have created a 0.6 mm diameter rubidium atomic beam with a continuous flux of $5\ifmmode\times\else\texttimes\fi{}{10}^{9}/\mathrm{s}$ and a pulsed flux 10 times greater. Its longitudinal velocity distribution is centered at 14 m/s with a FWHM of 2.7 m/s. Through an efficient recycling process, 70% of the atoms trapped in the MOT are loaded into the atomic beam.

Physical Review Letters•Oct 14, 1996•275 citations

Two-dimensional magneto-optical trap as a source for cold strontium atoms

Ingo Nosske, Luc Couturier, Fachao Hu +6 more

We report on the realization of a transversely loaded two-dimensional magneto-optical trap serving as a source for cold strontium atoms. We analyze the dependence of the source's properties on various parameters, in particular the intensity of a pushing beam accelerating the atoms out of the source. An atomic flux exceeding ${10}^{9}\phantom{\rule{0.28em}{0ex}}\mathrm{atoms}/\mathrm{s}$ at a rather moderate oven temperature of $500{\phantom{\rule{0.16em}{0ex}}}^{\ensuremath{\circ}}\mathrm{C}$ is achieved. The longitudinal velocity of the atomic beam can be tuned over several tens of m/s by adjusting the power of the pushing laser beam. The beam divergence is around 60 mrad, determined by the transverse velocity distribution of the cold atoms. The slow atom source is used to load a three-dimensional magneto-optical trap realizing loading rates up to ${10}^{9}\phantom{\rule{0.16em}{0ex}}\mathrm{atoms}/\mathrm{s}$ without indication of saturation of the loading rate for increasing oven temperature. The compact setup avoids undesired effects found in alternative sources like, e.g., Zeeman slowers, such as vacuum contamination and black-body radiation due to the hot strontium oven.

Physical Review A•Nov 15, 2017•62 citations

Using laser-cooled atoms as a focused ion beam source

J. L. Hanssen, E. A. Dakin, Jabez J. McClelland +1 more

The authors describe a new method for creating a high quality focused ion beam using laser-cooled neutral atoms in a magneto-optical trap as an ion source. They show that this new technique can provide spot resolutions and brightness values that are better than the state of the art in focused ion beams. The source can be used with a range of different ionic species and can be combined with laser cooling techniques to exert unprecedented control over the ion emission, for example, producing single ions “on demand.” The beam quality is a result of a high brightness and a narrow energy distribution, both of which stem from the cold temperature (≈100μK) of the atoms. The ions are produced by subjecting the cold neutral atoms to a photoionization laser, after which they become a compact source of nearly monoenergetic ions. With the application of a potential gradient, the ions form a beam that can be focused via standard ion optical techniques. They discuss estimations based on the initial size of the ion cloud and the energy distribution and show that the resulting beam has a low emittance.

Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena•Nov 1, 2006•20 citations
I present the construction of a low-velocity intense source (LVIS) of laser-cooled neutral strontium using permanent ring magnets. The LVIS consists of a magneto-optical trap from which cold strontium is extracted in a well-collimated beam. I also present the development and implementation of a full suite of low-noise, high-bandwidth laser control electronics including a microcontroller unit. This microcontroller remotely controls and monitors the current driver, temperature controller, and PID lock circuit for each diode laser simultaneously. The current driver output is accurate to within 2 micro-amps and repeatable to with a few nano-amps. The noise spectral density of the current driver hits a floor of 10^(-10) amps per root Hz at ~50 Hz and has a modulation bandwidth of ~50 MHz. The PID lock-circuit includes a scan-balancing option that we have used to scan an AR coated laser diode ~30 GHz mode-hop free. I describe the construction of an 80 mW frequency doubled 461 nm laser system using PPKTP for cooling and trapping neutral strontium in the LVIS. The LVIS, the electronics systems, and the 461 nm laser system represent major milestones on the way to producing a matter-wave interferometer using Sr-87 ions. The interferometer is based on an optical Raman transition between the hyperfine ground states of the Sr-87 ion. The ions will be produced by exciting the strontium LVIS beam to an auto-ionizing state in the continuum. In the interferometer two half-pi pulses of light and one pi pulse will be delivered to the ions to split and recombine their wave functions. I present calculations of the predicted sensitivity and a discussion of the possible applications. I present a method for locking a 407.8 nm laser to the 5s doublet S J=1/2 to 5p doublet P J=3/2 strontium ion transition in a neutral vapor. I present calculations for the necessary vacuum levels for the experiment and describe the preparation and assembly of the vacuum apparatus. The major vacuum system consists of two connected elastomer sealed chambers: one at 10^(-7) Torr and the other at 10^(-10) Torr separated by a region of low conductance. I present a Sr vapor cell constructed from standard CF fittings that allows the strontium to be heated to ~730 C, which can also be run as a thermal beam. I present a method for protecting the viewports on small-form alkali-earth vapor cells using lead or indium foil during the evaporation of oxide layers. Finally, I report on the current status of the experiment as well as detail future work on the apparatus.
We produced a slow atomic beam of rubidium with a low-velocity intense source (LVIS) and loaded a magneto-optical trap (MOT) in a connected chamber with the beam. The hole for the atomic beam allowed us to keep the MOT chamber at a much lower pressure than that of the LVIS. The LVIS produced an atomic beam with a continuous flux of (4.3±0.4)×109/s and an average velocity of only 11±3 m/s. The MOT captured the atoms with 67±15% efficiency, which was limited by the atomic-beam divergence. The MOT held 6×109 atoms with a typical trap-confinement time of 8 s.
A high-flux compact source of strontium atoms has been designed and built. We have investigated the feasibility of direct trapping of cold atoms from the atomic flux out of a hot oven. Our design uses a two-dimensional magneto-optical trap (MOT) with an additional laser beam that exerts a radiation force that is not counterbalanced to eject atoms (so-called ‘push’ beam), which is known as a 2D+ MOT configuration. This approach has been previously used for sodium, and has been extended to strontium in this work. Laser cooling of strontium typically requires multiple stages: effusion of atoms from an oven to produce an atomic beam, transverse collimation, a Zeeman slower and deflection before finally collecting atoms in a 3D MOT. A 2D+ MOT combines the Zeeman slowing, transverse collimation, and deflection into a single compact stage to provide a high-flux source suitable for applications such as matter-wave interferometry, atomic clocks and experimental studies of degenerate quantum gases. This thesis reports experimental work that has been carried out to develop and test an oven and the associated laser cooling apparatus for producing a source of cold strontium atoms which is straightforward to manufacture. We test the oven up to a temperature of To = 642 °C and measure a peak intensity of 6.8 × 1016 s−1 sr−1 and a flux of 2.9 × 1016 s−1. We typically operate the oven at To = 502 °C, for which the peak intensity and flux are 2.2 × 1015 s−1 sr−1 and 7.5 × 1014 s−1. A multi-channel nozzle made of graphite gives an angular divergence of 0.17 rad (10°) for the atomic beam. Trapping atoms directly from the thermal atomic beam into the MOT gives a maximum loading rate of 7.1 × 1010 s−1, without any laser light to repump atoms into the cooling cycle. We demonstrated a novel frequency stabilising technique for the laser by developing Zeeman-tunable modulation transfer spectroscopy in strontium with an inaccuracy of ±3.5 MHz and a frequency tuning range of 160 MHz. The initial aim of this thesis was to make a compact, high-flux strontium source suitable for quantum technology applications. During the course of this research, we participated in the preparation of a proposal for the construction of a large-scale atom interferometer based on the clock transition in strontium (87Sr) for the exploration of dark matter and gravitational waves (a project known as the Atom Interferometer Observatory and Network, AION). This changed the design requirements towards producing a higher flux (in particular of the isotope 87Sr), with compactness of the source being less important in ∼10 m scale apparatus.
We have produced and characterized an intense, slow, and highly collimated atomic beam extracted from a standard vapor cell magneto-optical trap (MOT). The technique used is dramatically simpler than previous methods for producing very cold atomic beams. We have created a 0.6 mm diameter rubidium atomic beam with a continuous flux of $5\ifmmode\times\else\texttimes\fi{}{10}^{9}/\mathrm{s}$ and a pulsed flux 10 times greater. Its longitudinal velocity distribution is centered at 14 m/s with a FWHM of 2.7 m/s. Through an efficient recycling process, 70% of the atoms trapped in the MOT are loaded into the atomic beam.
We report on the realization of a transversely loaded two-dimensional magneto-optical trap serving as a source for cold strontium atoms. We analyze the dependence of the source's properties on various parameters, in particular the intensity of a pushing beam accelerating the atoms out of the source. An atomic flux exceeding 109atoms/s{10}^{9}\phantom{\rule{0.28em}{0ex}}\mathrm{atoms}/\mathrm{s}109atoms/s at a rather moderate oven temperature of $500{\phantom{\rule{0.16em}{0ex}}}^{\ensuremath{\circ}}\mathrm{C}$ is achieved. The longitudinal velocity of the atomic beam can be tuned over several tens of m/s by adjusting the power of the pushing laser beam. The beam divergence is around 60 mrad, determined by the transverse velocity distribution of the cold atoms. The slow atom source is used to load a three-dimensional magneto-optical trap realizing loading rates up to 109atoms/s{10}^{9}\phantom{\rule{0.16em}{0ex}}\mathrm{atoms}/\mathrm{s}109atoms/s without indication of saturation of the loading rate for increasing oven temperature. The compact setup avoids undesired effects found in alternative sources like, e.g., Zeeman slowers, such as vacuum contamination and black-body radiation due to the hot strontium oven.
The authors describe a new method for creating a high quality focused ion beam using laser-cooled neutral atoms in a magneto-optical trap as an ion source. They show that this new technique can provide spot resolutions and brightness values that are better than the state of the art in focused ion beams. The source can be used with a range of different ionic species and can be combined with laser cooling techniques to exert unprecedented control over the ion emission, for example, producing single ions “on demand.” The beam quality is a result of a high brightness and a narrow energy distribution, both of which stem from the cold temperature (≈100μK) of the atoms. The ions are produced by subjecting the cold neutral atoms to a photoionization laser, after which they become a compact source of nearly monoenergetic ions. With the application of a potential gradient, the ions form a beam that can be focused via standard ion optical techniques. They discuss estimations based on the initial size of the ion cloud and the energy distribution and show that the resulting beam has a low emittance.