Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Holographic motion picture by Eu^3+:Y_2SiO_5

Masaharu Mitsunaga, Hiroko Sasaki, Koichi Karaki, N. Uesugi

Published May 15, 1994• 34 citations
Publisher

Abstract

Real-time recording of a moving object was made with persistent spectral hole burning of a cryogenic Eu(3+):Y(2)SiO(5) crystal. In a basic holographic configuration the ultrastable laser frequency was continuously scanned within the (7)F(0)-(5)D(0) absorption line (typically 200 MHz in 20 s) while the object was in motion, thus permitting the storage and reconstruction of the moving image. The success of this motion picture is attributable to (1) the kilohertz-wide hole width, (2) the quasi-persistent hole lifetime, and (3) the high hole-burning quantum efficiency of this material.

DOI
10.1364/ol.19.000752

Related papers

Holographic motion pictures by hole burning

Koichi Karaki, Hiroko Sasaki, Masaharu Mitsunaga

A real-time read/write motion picture has been demonstrated by hole-burning holography using cryogenic Eu3+:Y2SiO5 crystal. In a holographic configuration, the laser frequency was continuously scanned within the 7F0-5D0 absorption line while the object was in motion. Since this movie does not have any picture frames, it is temporary continuous. This feature might realize high-speed and high-time- resolution motion recording.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jul 27, 1995•1 citation

Direct pattern recognition of a motion picture by hole-burning holography of Eu^3+:Y_2SiO_5

Hiroko Sasaki, Koichi Karaki

We propose and demonstrate a novel technique for direct pattern recognition of motion pictures based on frequency- and spatial-domain holography using a cryogenic Eu(3+):Y(2)SiO(5) crystal. The fast hole-burning speed of the crystal allows a moving image to be continuously recorded in it by a frequency-scanned laser. Using Fourier transform holography permitted direct pattern recognition of a 25-s movie stored in the crystal to be realized. The correlation spot continuously followed the moving object with the same time resolution (10 ms) as the reproduced movie.

Applied Optics•Mar 10, 1997•6 citations

Holographic motion picture obtained by using Eu 3+ :Y 2 SiO 5

Hiroko Sasaki, Koichi Karaki, Masaharu Mitsunaga

Holographic image storage in an inhomogeneously boadened absorption line of a persistent spectral-hole-burning material has been studied extensively.1 The great wavelength-multiplexing capability of a hole-burning material permits the storage of 103 –106 images in the same spatial area of a medium. Therefore, hole-burning holography is expected to be an ultrahigh-density image-storage technique. More than 2000 images have been successfully stored in organic-dye-doped polymer samples.1

Conference on Lasers and Electro-Optics•May 21, 1995•0 citations

Holeburning Holography in Eu3+:Y2SiO5 crystal

Hiroko Sasaki, Koichi Karaki, Masaharu Mitsunaga +1 more

Holeburning holography is an ultrahigh density image storage technique. Since the memory capacity is governed by the ratio of the inhomogeneous-to-homogeneous linewidths, 103~106 images can be recorded in a single sample spot. An extensive study on holebuming holography has been carried out by Wild et.al for organic dye-doped polymer samples1-4. On the other hand, holeburning holography has not been carried out for crystal samples, because there are few crystals exhibiting persistent holes. We have performed holeburning holography to record images for Eu3+:Y2SiO5 crystal which has been known for exhibiting persistent holes. Moreover, Eu3+:Y2SiO5 has other unique features5,6 such as narrow holewidth and high holeburning quantum efficiency. By using this crystal, we have also succeeded in real-time recording of a moving object.

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1994•0 citations

Spectral Hole-Burning of Eu 3+ :Y 2 SiO 5 Crystal at 16 K

Xue Shao-Lin, Muhuo Yu, Lingbing Chen +4 more

By using an Ar + ion laser, a tunable Rh 6 G dye laser (linewidth 0.5 cm −1 ) pumped by the second harmonic of a YAG:Nd laser and a Coherent 899-21 dye laser as light sources and using a monochromator, a phase-locking amplifier and a computer as the data detecting system, we detect the optical properties of Eu 3+ -doped Y 2 SiO 5 crystal. Persistent spectral hole burning (PSHB) are observed in the Eu 3+ ions spectral lines ( 5 D 0 − 7 F 0 transition) in the crystal at the temperature of 16 K. For 15 mW dye laser burning the crystal for 0.1 s spectral holes with hole width about 80 MHz both at 579.62 nm and at 579.82 nm are detected and the holes can remain for a long time, more than 10 h.

Chinese Physics Letters•Apr 1, 2007•0 citations

Holography in Frequency Selective Media: Hologram Phase and Causality

Stefan Bernet, Bern Kohler, Alexander Rebane +2 more

Persistent spectral hole burning [1] in conjunction with holography (PSHB) opens new prospects for high density optical information storage and processing. In the holographic approach, hole burning is carried out with two -crossed coherent laser beams which bleach out a narrow frequency domain hole in an inhomogeneously broadened absorption band recording, at the same time, a spatial holographic fringe pattern. During read out of the hologram diffraction from this spatial fringe pattern occurs, and a holographic image is reconstructed, reflecting the changes of the absorption coefficient and the refractive index introduced by the spectral hole [2].

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1991•1 citation
Real-time recording of a moving object was made with persistent spectral hole burning of a cryogenic Eu(3+):Y(2)SiO(5) crystal. In a basic holographic configuration the ultrastable laser frequency was continuously scanned within the (7)F(0)-(5)D(0) absorption line (typically 200 MHz in 20 s) while the object was in motion, thus permitting the storage and reconstruction of the moving image. The success of this motion picture is attributable to (1) the kilohertz-wide hole width, (2) the quasi-persistent hole lifetime, and (3) the high hole-burning quantum efficiency of this material.
We propose and demonstrate a novel technique for direct pattern recognition of motion pictures based on frequency- and spatial-domain holography using a cryogenic Eu(3+):Y(2)SiO(5) crystal. The fast hole-burning speed of the crystal allows a moving image to be continuously recorded in it by a frequency-scanned laser. Using Fourier transform holography permitted direct pattern recognition of a 25-s movie stored in the crystal to be realized. The correlation spot continuously followed the moving object with the same time resolution (10 ms) as the reproduced movie.
Holeburning holography is an ultrahigh density image storage technique. Since the memory capacity is governed by the ratio of the inhomogeneous-to-homogeneous linewidths, 103~106 images can be recorded in a single sample spot. An extensive study on holebuming holography has been carried out by Wild et.al for organic dye-doped polymer samples1-4. On the other hand, holeburning holography has not been carried out for crystal samples, because there are few crystals exhibiting persistent holes. We have performed holeburning holography to record images for Eu3+:Y2SiO5 crystal which has been known for exhibiting persistent holes. Moreover, Eu3+:Y2SiO5 has other unique features5,6 such as narrow holewidth and high holeburning quantum efficiency. By using this crystal, we have also succeeded in real-time recording of a moving object.
By using an Ar + ion laser, a tunable Rh 6 G dye laser (linewidth 0.5 cm −1 ) pumped by the second harmonic of a YAG:Nd laser and a Coherent 899-21 dye laser as light sources and using a monochromator, a phase-locking amplifier and a computer as the data detecting system, we detect the optical properties of Eu 3+ -doped Y 2 SiO 5 crystal. Persistent spectral hole burning (PSHB) are observed in the Eu 3+ ions spectral lines ( 5 D 0 − 7 F 0 transition) in the crystal at the temperature of 16 K. For 15 mW dye laser burning the crystal for 0.1 s spectral holes with hole width about 80 MHz both at 579.62 nm and at 579.82 nm are detected and the holes can remain for a long time, more than 10 h.
Persistent spectral hole burning [1] in conjunction with holography (PSHB) opens new prospects for high density optical information storage and processing. In the holographic approach, hole burning is carried out with two -crossed coherent laser beams which bleach out a narrow frequency domain hole in an inhomogeneously broadened absorption band recording, at the same time, a spatial holographic fringe pattern. During read out of the hologram diffraction from this spatial fringe pattern occurs, and a holographic image is reconstructed, reflecting the changes of the absorption coefficient and the refractive index introduced by the spectral hole [2].