Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Superconductive Electronics Conference (ISEC)

Reducing surface loss in 3D microwave copper cavities for superconducting transmon qubits

Daniela F. Bogorin, Matthew Ware, Douglas McClure, Stephen Sorokanich, B. L. T. Plourde

Published Jul 1, 2013• 3 citations
Publisher

Abstract

The recent implementation of three-dimensional microwave cavities coupled to superconducting transmon qubits has led to dramatic improvements in qubit coherence times [1]. Besides the superconducting aluminum cavities that have been used in many such measurements, other recent experiments have utilized copper cavities [2] with coherence times now approaching 0.1 ms. We are investigating the effects on the quality factor for three-dimensional copper cavities that have the cavity-wall surfaces electropolished and coated with a superconducting tin layer. The copper base provides a good path for thermalizing the cavity walls and qubit chip, while the surface treatment reduces the microwave loss. We have measured a superconducting transmon qubit in such a cavity and we report our low-temperature coherence results on the same qubit and cavity measured in two different labs.

DOI
10.1109/isec.2013.6604283

Related papers

Copper Waveguide Cavities With Reduced Surface Loss for Coupling to Superconducting Qubits

Daniela F. Bogorin, Douglas McClure, Matthew Ware +1 more

Significant improvements in superconducting qubit coherence times have been achieved recently with 3-D microwave waveguide cavities coupled to transmon qubits. While many of the measurements in this direction have utilized superconducting aluminum cavities, other recent work has involved qubits coupled to copper cavities with coherence times approaching 0.1 ms. The copper provides a good path for thermalizing the cavity walls and qubit chip, although the substantial cavity loss makes conventional dispersive qubit measurements challenging. We are exploring various approaches for improving the quality factor of 3-D copper cavities, including electropolishing and coating with superconducting layers of tin. We have characterized these cavities on multiple cooldowns and found tin plating to be robust. In addition, we have performed coherence measurements on transmon qubits in these cavities and observed promising performance.

arXiv:1409.3245•IEEE Transactions on Applied Superconductivity•Jun 30, 2014•5 citations

Reaching 10 ms single photon lifetimes for superconducting aluminum cavities

Matthew Reagor, Hanhee Paik, Gianluigi Catelani +10 more

Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>103) higher quality factors and longer lifetimes should be achievable for 3D structures. Motivated by this principle, we have reached internal quality factors greater than 0.5 × 109 and intrinsic lifetimes of 0.01 s for multiple aluminum superconducting cavity resonators at single photon energies and millikelvin temperatures. These improvements could enable long lived quantum memories with submicrosecond access times when strongly coupled to superconducting qubits.

arXiv:1302.4408•Applied Physics Letters•May 13, 2013•244 citations

3D microwave cavity with magnetic flux control and enhanced quality factor

Yarema Reshitnyk, Markus Jerger, Arkady Fedorov

Three-dimensional (3D) microwave cavities have been extensively used for coupling and interacting with superconducting quantum bits (qubits), providing a versatile platform for quantum control experiments and for realizing hybrid quantum systems. While having high quality factors (>10 6 ) superconducting cavities do not permit magnetic field control of qubits. In contrast, cavities made of normal metals are transparent to magnetic fields, but experience lower quality factors (∼10 4 ). We have created a hybrid cavity which is primarily composed of aluminium but also contains a small copper insert reaching the internal quality factor of ≃10 5 , an order of magnitude improvement over all previously tested normal metal cavities. In order to demonstrate precise magnetic control, we performed spectroscopy of three superconducting qubits, where individual control of each qubit’s frequency was exerted with small external wire coils. An improvement in quality factor and magnetic field control makes this 3D hybrid cavity an attractive new element for circuit quantum electrodynamics experiments.

arXiv:1603.07423•EPJ Quantum Technology•Oct 18, 2016•17 citations

Scalable 3D quantum memory

Edwar Xie, Frank Deppe, Daniel Repp +7 more

Superconducting 3D microwave cavities offer state-of-the-art coherence times and a well controlled environment for superconducting qubits. In order to realize at the same time fast readout and long-lived quantum information storage, one can couple the qubit both to a low-quality readout and a high-quality storage cavity. However, such systems are bulky compared to their less coherent 2D counterparts. A more compact and scalable approach is achieved by making use of the multimode structure of a 3D cavity. In our work, we investigate such a device where a transmon qubit is capacitively coupled to two modes of a single 3D cavity. The external coupling is engineered so that the memory mode has an about 100 times larger quality factor than the readout mode. Using an all-microwave second-order protocol, we realize a lifetime enhancement of the stored state over the qubit lifetime by a factor of $6$ with a $Z$-fidelity of $82\%$. We also find that this enhancement is not limited by fundamental constraints.

•Mar 13, 2018•1 citation

Compact 3D quantum memory

Edwar Xie, Frank Deppe, Michael Renger +8 more

Superconducting 3D microwave cavities offer state-of-the-art coherence times and a well-controlled environment for superconducting qubits. In order to realize at the same time fast readout and long-lived quantum information storage, one can couple the qubit to both a low-quality readout and a high-quality storage cavity. However, such systems are bulky compared to their less coherent 2D counterparts. A more compact and scalable approach is achieved by making use of the multimode structure of a 3D cavity. In our work, we investigate such a device where a transmon qubit is capacitively coupled to two modes of a single 3D cavity. External coupling is engineered so that the memory mode has an about 100 times larger quality factor than the readout mode. Using an all-microwave second-order protocol, we realize a lifetime enhancement of the stored state over the qubit lifetime by a factor of 6 with a fidelity of approximately 80% determined via quantum process tomography. We also find that this enhancement is not limited by fundamental constraints.

arXiv:1803.04711•Applied Physics Letters•May 14, 2018•17 citations

High quality three-dimensional aluminum microwave cavities

M. Kudra, J. Biznárová, A. Fadavi Roudsari +5 more

We present a comprehensive study of internal quality factors in superconducting stub-geometry three-dimensional cavities made of aluminum. We use wet etching, annealing, and electrochemical polishing to improve the as machined quality factor. We find that the dominant loss channel is split between the two-level system loss and an unknown source with a 40:60 proportion. A total of 17 cavities of different purity, resonance frequency, and size were studied. Our treatment results in reproducible cavities, with 10 of them showing internal quality factors above 80 × 106 at a power corresponding to an average of a single photon in the cavity. The best cavity has an internal quality factor of 115 × 106 at a single photon level.

arXiv:2006.02213•Applied Physics Letters•Aug 17, 2020•57 citations
The recent implementation of three-dimensional microwave cavities coupled to superconducting transmon qubits has led to dramatic improvements in qubit coherence times [1]. Besides the superconducting aluminum cavities that have been used in many such measurements, other recent experiments have utilized copper cavities [2] with coherence times now approaching 0.1 ms. We are investigating the effects on the quality factor for three-dimensional copper cavities that have the cavity-wall surfaces electropolished and coated with a superconducting tin layer. The copper base provides a good path for thermalizing the cavity walls and qubit chip, while the surface treatment reduces the microwave loss. We have measured a superconducting transmon qubit in such a cavity and we report our low-temperature coherence results on the same qubit and cavity measured in two different labs.
Significant improvements in superconducting qubit coherence times have been achieved recently with 3-D microwave waveguide cavities coupled to transmon qubits. While many of the measurements in this direction have utilized superconducting aluminum cavities, other recent work has involved qubits coupled to copper cavities with coherence times approaching 0.1 ms. The copper provides a good path for thermalizing the cavity walls and qubit chip, although the substantial cavity loss makes conventional dispersive qubit measurements challenging. We are exploring various approaches for improving the quality factor of 3-D copper cavities, including electropolishing and coating with superconducting layers of tin. We have characterized these cavities on multiple cooldowns and found tin plating to be robust. In addition, we have performed coherence measurements on transmon qubits in these cavities and observed promising performance.
Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>103) higher quality factors and longer lifetimes should be achievable for 3D structures. Motivated by this principle, we have reached internal quality factors greater than 0.5 × 109 and intrinsic lifetimes of 0.01 s for multiple aluminum superconducting cavity resonators at single photon energies and millikelvin temperatures. These improvements could enable long lived quantum memories with submicrosecond access times when strongly coupled to superconducting qubits.
Three-dimensional (3D) microwave cavities have been extensively used for coupling and interacting with superconducting quantum bits (qubits), providing a versatile platform for quantum control experiments and for realizing hybrid quantum systems. While having high quality factors (>10 6 ) superconducting cavities do not permit magnetic field control of qubits. In contrast, cavities made of normal metals are transparent to magnetic fields, but experience lower quality factors (∼10 4 ). We have created a hybrid cavity which is primarily composed of aluminium but also contains a small copper insert reaching the internal quality factor of ≃10 5 , an order of magnitude improvement over all previously tested normal metal cavities. In order to demonstrate precise magnetic control, we performed spectroscopy of three superconducting qubits, where individual control of each qubit’s frequency was exerted with small external wire coils. An improvement in quality factor and magnetic field control makes this 3D hybrid cavity an attractive new element for circuit quantum electrodynamics experiments.
Superconducting 3D microwave cavities offer state-of-the-art coherence times and a well controlled environment for superconducting qubits. In order to realize at the same time fast readout and long-lived quantum information storage, one can couple the qubit both to a low-quality readout and a high-quality storage cavity. However, such systems are bulky compared to their less coherent 2D counterparts. A more compact and scalable approach is achieved by making use of the multimode structure of a 3D cavity. In our work, we investigate such a device where a transmon qubit is capacitively coupled to two modes of a single 3D cavity. The external coupling is engineered so that the memory mode has an about 100 times larger quality factor than the readout mode. Using an all-microwave second-order protocol, we realize a lifetime enhancement of the stored state over the qubit lifetime by a factor of 666 with a ZZZ-fidelity of 82%82\%82%. We also find that this enhancement is not limited by fundamental constraints.
Superconducting 3D microwave cavities offer state-of-the-art coherence times and a well-controlled environment for superconducting qubits. In order to realize at the same time fast readout and long-lived quantum information storage, one can couple the qubit to both a low-quality readout and a high-quality storage cavity. However, such systems are bulky compared to their less coherent 2D counterparts. A more compact and scalable approach is achieved by making use of the multimode structure of a 3D cavity. In our work, we investigate such a device where a transmon qubit is capacitively coupled to two modes of a single 3D cavity. External coupling is engineered so that the memory mode has an about 100 times larger quality factor than the readout mode. Using an all-microwave second-order protocol, we realize a lifetime enhancement of the stored state over the qubit lifetime by a factor of 6 with a fidelity of approximately 80% determined via quantum process tomography. We also find that this enhancement is not limited by fundamental constraints.
We present a comprehensive study of internal quality factors in superconducting stub-geometry three-dimensional cavities made of aluminum. We use wet etching, annealing, and electrochemical polishing to improve the as machined quality factor. We find that the dominant loss channel is split between the two-level system loss and an unknown source with a 40:60 proportion. A total of 17 cavities of different purity, resonance frequency, and size were studied. Our treatment results in reproducible cavities, with 10 of them showing internal quality factors above 80 × 106 at a power corresponding to an average of a single photon in the cavity. The best cavity has an internal quality factor of 115 × 106 at a single photon level.