Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1409.3245 · IEEE Transactions on Applied Superconductivity

Copper Waveguide Cavities With Reduced Surface Loss for Coupling to Superconducting Qubits

Daniela F. Bogorin, Douglas McClure, Matthew Ware, B. L. T. Plourde

Published Jun 30, 2014• 5 citations
arXivHTMLPDF

Abstract

Significant improvements in superconducting qubit coherence times have been achieved recently with 3-D microwave waveguide cavities coupled to transmon qubits. While many of the measurements in this direction have utilized superconducting aluminum cavities, other recent work has involved qubits coupled to copper cavities with coherence times approaching 0.1 ms. The copper provides a good path for thermalizing the cavity walls and qubit chip, although the substantial cavity loss makes conventional dispersive qubit measurements challenging. We are exploring various approaches for improving the quality factor of 3-D copper cavities, including electropolishing and coating with superconducting layers of tin. We have characterized these cavities on multiple cooldowns and found tin plating to be robust. In addition, we have performed coherence measurements on transmon qubits in these cavities and observed promising performance.

DOI
10.1109/tasc.2014.2330522

Related papers

Reducing surface loss in 3D microwave copper cavities for superconducting transmon qubits

Daniela F. Bogorin, Matthew Ware, Douglas McClure +2 more

The recent implementation of three-dimensional microwave cavities coupled to superconducting transmon qubits has led to dramatic improvements in qubit coherence times [1]. Besides the superconducting aluminum cavities that have been used in many such measurements, other recent experiments have utilized copper cavities [2] with coherence times now approaching 0.1 ms. We are investigating the effects on the quality factor for three-dimensional copper cavities that have the cavity-wall surfaces electropolished and coated with a superconducting tin layer. The copper base provides a good path for thermalizing the cavity walls and qubit chip, while the surface treatment reduces the microwave loss. We have measured a superconducting transmon qubit in such a cavity and we report our low-temperature coherence results on the same qubit and cavity measured in two different labs.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•3 citations

Reaching 10 ms single photon lifetimes for superconducting aluminum cavities

Matthew Reagor, Hanhee Paik, Gianluigi Catelani +10 more

Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>103) higher quality factors and longer lifetimes should be achievable for 3D structures. Motivated by this principle, we have reached internal quality factors greater than 0.5 × 109 and intrinsic lifetimes of 0.01 s for multiple aluminum superconducting cavity resonators at single photon energies and millikelvin temperatures. These improvements could enable long lived quantum memories with submicrosecond access times when strongly coupled to superconducting qubits.

arXiv:1302.4408•Applied Physics Letters•May 13, 2013•244 citations

Material exploration towards high quality factor microwave resonators

Francesco Crisa, S. Garattoni, Jaeyel Lee +9 more

Niobium and aluminum have been widely used to realize superconducting resonators and qubits. However, the native oxide at the metal air interface limits the devices results. This layer is highly disordered, and it induces losses limiting the performances of the resonators or qubits. Recently, tantalum led to great improvement in qubit relaxation time. This improvement has been attributed to a thinner and less disordered oxide layer compared to Nb and Al. This study is aimed to limit the formation of the oxide layer, by the introduction of novel superconducting materials such as rhenium or by encapsulating the Nb surface with other superconducting materials such as Ta, Al, Re or other non-superconducting materials such as Au. To better understand the results, we are realizing these studies on coplanar waveguide resonators where the relation between surface losses and quality factor is clear. We are also analyzing different fabrication techniques to completely characterize our devices, linking material properties to the performances. In this work we are also varying the participation ratio of the devices in order to extract with higher fidelity and precision the losses introduced by the involved interfaces.

•Sep 26, 2024•0 citations

Improved coherence in optically defined niobium trilayer-junction qubits

Alexander Anferov, Kan-Heng Lee, Fang Zhao +2 more

Niobium offers the benefit of increased operating temperatures and frequencies for Josephson junctions, which are the core component of superconducting devices. However, existing niobium processes are limited by more complicated fabrication methods and higher losses than now-standard aluminum junctions. Combining recent trilayer fabrication advancements, methods to remove lossy dielectrics and modern superconducting qubit design, we revisit niobium trilayer junctions and fabricate all-niobium transmons using only optical lithography. We characterize devices in the microwave domain, measuring coherence times up to $62\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$ and an average qubit quality factor above ${10}^{5}$: much closer to state-of-the-art aluminum-junction devices. We find the higher superconducting gap energy also results in reduced quasiparticle sensitivity above 0.16 K, where aluminum-junction performance deteriorates. Our low-loss junction process is readily applied to standard optical-based foundry processes, opening alternative avenues for direct integration and scalability, and paves the way for higher-temperature and higher-frequency quantum devices.

arXiv:2306.05883•Physical Review Applied•Feb 23, 2024•55 citations

Strategies and Trade-Offs for Controllability and Memory Time of Ultra-High-Quality Microwave Cavities in Circuit Quantum Electrodynamics

Iivari Pietikäinen, Ondřej Černotík, Alec Eickbusch +4 more

Three-dimensional microwave cavity resonators have been shown to reach lifetimes of the order of a second by maximizing the cavity volume relative to its surface, using better materials, and improving surface treatments. Such cavities represent an ideal platform for quantum computing with bosonic qubits, but their efficient control remains an outstanding problem since the large mode volume results in less efficient coupling to nonlinear elements used for their control. Moreover, this coupling induces additional cavity decay via the inverse Purcell effect that can easily destroy the advantage of a long intrinsic lifetime. Here, we discuss conditions on, and protocols for, efficient utilization of these ultra-high-quality microwave cavities as memories for conventional superconducting qubits. We show that, surprisingly, efficient write and read operations with ultra-high-quality cavities do not require similar quality factors for the qubits and other nonlinear elements used to control them. Through a combination of analytical and numerical calculations, we demonstrate that efficient coupling to cavities with second-scale lifetime is possible with state-of-the-art transmon and superconducting nonlinear asymmetric inductive element devices and outline a route towards controlling cavities with even higher quality factors. Our work explores a potentially viable roadmap towards using ultra-high-quality microwave cavity resonators for storing and processing information encoded in bosonic qubits. Published by the American Physical Society 2024

arXiv:2403.02278•PRX Quantum•Oct 17, 2024•16 citations

Substrate surface engineering for high-quality silicon/aluminum superconducting resonators

C T Earnest, J. H. Béjanin, T G McConkey +4 more

Abstract Quantum bits (qubits) with long coherence times are an important element for the implementation of medium- and large-scale quantum computers. In the case of superconducting planar qubits, understanding and improving qubits’ quality can be achieved by studying superconducting planar resonators. In this paper, we fabricate and characterize coplanar waveguide resonators made from aluminum thin films deposited on silicon substrates. We perform three different substrate surface treatments prior to aluminum deposition: one chemical treatment based on a hydrofluoric acid clean; one physical treatment consisting of a thermal annealing at 880 °C in high vacuum; and one combined treatment comprising both the chemical and the physical treatments. The aim of these treatments is to remove the two-level state (TLS) defects hosted by the native oxides residing at the various samples’ interfaces. We first characterize the fabricated samples through cross-sectional tunneling electron microscopy, acquiring electron energy loss spectroscopy maps of the samples’ cross sections. These measurements show that both the chemical and the physical treatments almost entirely remove native silicon oxide from the substrate surface and that their combination results in the cleanest interface. Additionally, we analyze the effects of the various substrate treatments on the roughness of the silicon surface by means of atomic force microscopy surface morphology mapping. We then study the quality of the resonators by means of microwave measurements in the ‘quantum regime’, i.e., at a temperature T ∼ 10 mK and at a mean microwave photon number 〈 n ph 〉 ∼ 1 . In this regime, we find that both surface treatments independently improve the resonator’s intrinsic quality factor by ≈172%. The highest quality factor is obtained for the combined treatment, Q i ≈ 0.82 million, corresponding to an improvement by ≈256%. Finally, we find that the TLS quality factor averaged over a time period of 3 h is ∼3 million at 〈 n ph 〉 ∼ 10 , indicating that substrate surface engineering can potentially reduce the TLS loss below other losses such as quasiparticle loss and flux noise.

arXiv:1807.08072•Superconductor Science and Technology•Oct 1, 2018•77 citations
Significant improvements in superconducting qubit coherence times have been achieved recently with 3-D microwave waveguide cavities coupled to transmon qubits. While many of the measurements in this direction have utilized superconducting aluminum cavities, other recent work has involved qubits coupled to copper cavities with coherence times approaching 0.1 ms. The copper provides a good path for thermalizing the cavity walls and qubit chip, although the substantial cavity loss makes conventional dispersive qubit measurements challenging. We are exploring various approaches for improving the quality factor of 3-D copper cavities, including electropolishing and coating with superconducting layers of tin. We have characterized these cavities on multiple cooldowns and found tin plating to be robust. In addition, we have performed coherence measurements on transmon qubits in these cavities and observed promising performance.
The recent implementation of three-dimensional microwave cavities coupled to superconducting transmon qubits has led to dramatic improvements in qubit coherence times [1]. Besides the superconducting aluminum cavities that have been used in many such measurements, other recent experiments have utilized copper cavities [2] with coherence times now approaching 0.1 ms. We are investigating the effects on the quality factor for three-dimensional copper cavities that have the cavity-wall surfaces electropolished and coated with a superconducting tin layer. The copper base provides a good path for thermalizing the cavity walls and qubit chip, while the surface treatment reduces the microwave loss. We have measured a superconducting transmon qubit in such a cavity and we report our low-temperature coherence results on the same qubit and cavity measured in two different labs.
Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>103) higher quality factors and longer lifetimes should be achievable for 3D structures. Motivated by this principle, we have reached internal quality factors greater than 0.5 × 109 and intrinsic lifetimes of 0.01 s for multiple aluminum superconducting cavity resonators at single photon energies and millikelvin temperatures. These improvements could enable long lived quantum memories with submicrosecond access times when strongly coupled to superconducting qubits.
Niobium and aluminum have been widely used to realize superconducting resonators and qubits. However, the native oxide at the metal air interface limits the devices results. This layer is highly disordered, and it induces losses limiting the performances of the resonators or qubits. Recently, tantalum led to great improvement in qubit relaxation time. This improvement has been attributed to a thinner and less disordered oxide layer compared to Nb and Al. This study is aimed to limit the formation of the oxide layer, by the introduction of novel superconducting materials such as rhenium or by encapsulating the Nb surface with other superconducting materials such as Ta, Al, Re or other non-superconducting materials such as Au. To better understand the results, we are realizing these studies on coplanar waveguide resonators where the relation between surface losses and quality factor is clear. We are also analyzing different fabrication techniques to completely characterize our devices, linking material properties to the performances. In this work we are also varying the participation ratio of the devices in order to extract with higher fidelity and precision the losses introduced by the involved interfaces.
Niobium offers the benefit of increased operating temperatures and frequencies for Josephson junctions, which are the core component of superconducting devices. However, existing niobium processes are limited by more complicated fabrication methods and higher losses than now-standard aluminum junctions. Combining recent trilayer fabrication advancements, methods to remove lossy dielectrics and modern superconducting qubit design, we revisit niobium trilayer junctions and fabricate all-niobium transmons using only optical lithography. We characterize devices in the microwave domain, measuring coherence times up to $62\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$ and an average qubit quality factor above 105{10}^{5}105: much closer to state-of-the-art aluminum-junction devices. We find the higher superconducting gap energy also results in reduced quasiparticle sensitivity above 0.16 K, where aluminum-junction performance deteriorates. Our low-loss junction process is readily applied to standard optical-based foundry processes, opening alternative avenues for direct integration and scalability, and paves the way for higher-temperature and higher-frequency quantum devices.
Three-dimensional microwave cavity resonators have been shown to reach lifetimes of the order of a second by maximizing the cavity volume relative to its surface, using better materials, and improving surface treatments. Such cavities represent an ideal platform for quantum computing with bosonic qubits, but their efficient control remains an outstanding problem since the large mode volume results in less efficient coupling to nonlinear elements used for their control. Moreover, this coupling induces additional cavity decay via the inverse Purcell effect that can easily destroy the advantage of a long intrinsic lifetime. Here, we discuss conditions on, and protocols for, efficient utilization of these ultra-high-quality microwave cavities as memories for conventional superconducting qubits. We show that, surprisingly, efficient write and read operations with ultra-high-quality cavities do not require similar quality factors for the qubits and other nonlinear elements used to control them. Through a combination of analytical and numerical calculations, we demonstrate that efficient coupling to cavities with second-scale lifetime is possible with state-of-the-art transmon and superconducting nonlinear asymmetric inductive element devices and outline a route towards controlling cavities with even higher quality factors. Our work explores a potentially viable roadmap towards using ultra-high-quality microwave cavity resonators for storing and processing information encoded in bosonic qubits. Published by the American Physical Society 2024
Abstract Quantum bits (qubits) with long coherence times are an important element for the implementation of medium- and large-scale quantum computers. In the case of superconducting planar qubits, understanding and improving qubits’ quality can be achieved by studying superconducting planar resonators. In this paper, we fabricate and characterize coplanar waveguide resonators made from aluminum thin films deposited on silicon substrates. We perform three different substrate surface treatments prior to aluminum deposition: one chemical treatment based on a hydrofluoric acid clean; one physical treatment consisting of a thermal annealing at 880 °C in high vacuum; and one combined treatment comprising both the chemical and the physical treatments. The aim of these treatments is to remove the two-level state (TLS) defects hosted by the native oxides residing at the various samples’ interfaces. We first characterize the fabricated samples through cross-sectional tunneling electron microscopy, acquiring electron energy loss spectroscopy maps of the samples’ cross sections. These measurements show that both the chemical and the physical treatments almost entirely remove native silicon oxide from the substrate surface and that their combination results in the cleanest interface. Additionally, we analyze the effects of the various substrate treatments on the roughness of the silicon surface by means of atomic force microscopy surface morphology mapping. We then study the quality of the resonators by means of microwave measurements in the ‘quantum regime’, i.e., at a temperature T ∼ 10 mK and at a mean microwave photon number 〈 n ph 〉 ∼ 1 . In this regime, we find that both surface treatments independently improve the resonator’s intrinsic quality factor by ≈172%. The highest quality factor is obtained for the combined treatment, Q i ≈ 0.82 million, corresponding to an improvement by ≈256%. Finally, we find that the TLS quality factor averaged over a time period of 3 h is ∼3 million at 〈 n ph 〉 ∼ 10 , indicating that substrate surface engineering can potentially reduce the TLS loss below other losses such as quasiparticle loss and flux noise.