Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Electronics Letters

Single Josephson junction superconducting memory cell

James A. Blackburn, H. Smith

Published Aug 31, 1978• 2 citations
Publisher

Abstract

It is argued that a large-inductance superconducting loop interrupted by a single Josephson junction can function as a memory element. Bundles of flux quanta can be stored in the cell and removed from it by the application of appropriate bias currents or fields.
DOI
10.1049/el:19780401

Related papers

Memories with Josephson Junctions

Peter Wolf

The talk is based on an overview which was published recently (1). For this reason, only an abstract is given here, which includes Later results not contained in the aforementioned overview. The presently-known Josephson memory cells store information as persistent currents in superconducting loops, or what is equivalent as a magnetic flux in the area of the ring. This method of storage is nonvolatile and has no power consumption in the storing state. In a superconducting ring system, the magnetic flux is quantized, and cells have been built which operate either with only one flux quantum, or with many of them. For the Latter cells with many flux quanta (ring cells), quite a number of designs exist. They have one or two Josephson junctions in the ring, which allow writing. An external junction which is controlled by the ring current serves for non-destructive reading of the information. The smallest cell realized had an area of 900 ?m2 with a 2 ?m minimum line width. Switching speed was ? 80 ps. Cells which store information as a single-flux quantum (single flux-quantum cells = SFQ cells) in the ring, usually contain two Josephson junctions used for reading and writing. Read-out in most of these cells is destructive, but methods of reading non-destructively have also been proposed. The smallest device made had an area of ? 150 ?m2 with a minimum line width of 2 ?m. The read signal had a rise time ? 100 ps.

European Solid-State Circuits Conference (ESSCIRC)•Sep 1, 1978•0 citations

Voltage-controlled superconducting magnetic memory

Ahmed Kenawy, Wim Magnus, M. V. Miloševıć +1 more

Over the past few decades, superconducting circuits have been used to realize various novel electronic devices such as quantum bits, SQUIDs, parametric amplifiers, etc. One domain, however, where superconducting circuits fall short is information storage. Superconducting memories are based on the quantization of magnetic flux in superconducting loops. Standard implementations store information as magnetic flux quanta in a superconducting loop interrupted by two Josephson junctions (i.e., a SQUID). However, due to the large inductance required, the size of the SQUID loop cannot be scaled below several micrometers, resulting in low-density memory chips. Here, we propose a scalable memory consisting of a voltage-biased superconducting ring threaded by a half-quantum flux bias. By numerically solving the time-dependent Ginzburg-Landau equations, we show that applying a time-dependent bias voltage in the microwave range constitutes a writing mechanism to change the number of stored flux quanta within the ring. Since the proposed device does not require a large loop inductance, it can be scaled down, enabling a high-density memory technology.

AIP Advances•Dec 1, 2019•2 citations

Nonvolatile memory cell using a superconducting-ferromagnetic π Josephson junction

Junwen Zeng, Lei Chen, Xianghai Zhong +8 more

Abstract Storage of a single magnetic flux quantum in a superconducting loop containing a Josephson junction represents a promising unit cell configuration for construction of a cryogenic memory of superconducting digital circuits. However, application of a DC bias current is required for operation of such a memory cell to maintain trapping of the flux quantum in the storage loop. In this work, we present a superconducting memory cell that uses a superconducting-magnetic π junction. The cell characteristics show flux quantum hysteresis centering at the zero-bias current. We develop a fabrication process that combines superconductor–ferromagnet–superconductor (SFS) junctions with superconductor–normal metal–superconductor (SNS) junctions. The critical current density of the SFS junctions shows a 0–π oscillation as a function of the ferromagnetic layer thickness. The formation of the π junction is confirmed further by the flux modulation curves of a superconducting quantum interference device made from SNS junctions with an additional SFS junction.

Superconductor Science and Technology•Jul 13, 2022•9 citations

Memory cell based on a φ Josephson junction

E. Goldobin, H. Sickinger, Martin P. Weides +4 more

The φ Josephson junction has a doubly degenerate ground state with the Josephson phases ±φ. We demonstrate the use of such a φ Josephson junction as a memory cell (classical bit), where writing is done by applying a magnetic field and reading by applying a bias current. In the “store” state, the junction does not require any bias or magnetic field, but just needs to stay cooled for permanent storage of the logical bit. Straightforward integration with rapid single flux quantum logic is possible.

arXiv:1306.1683•Applied Physics Letters•Jun 17, 2013•89 citations

A capacitively coupled SFQ Josephson memory cell

Hideo Suzuki, S. Hasuo

The design and experimental results for a novel type of Josephson memory cell are presented. The cell has a simpler construction than the conventional Henkels-type, using a one-junction SQUID (superconducting quantum interference device) capacitively coupled to a single junction. Binary data are stored as single flux quanta and are destructively read out by sensing a pulse caused by a vortex-mode transition. Computer simulations suggest that the read operation could be performed with a bias margin for the sense junction of +or-28% and that the rise time of the sense current in a 16-bit memory cell would be as fast as 30 ps, despite having to sense a vortex-mode transition. Results are presented for a memory cell fabricated with Nb-AlO/sub x/-Nb junctions.>

IEEE Transactions on Electron Devices•Jul 1, 1988•10 citations

Operation of Strings of Single Flux-Quantum Memory Cells using Josephson Junctions

Pierre Guéret, Th. O. Mohr, A. Moser +1 more

Experimental and theoretical investigations have been carried out on strings with 98 series-connected memory cells with Josephson junctions. The cells store binary information in single flux quanta. These strings can be considered as basic building blocks of a memory array. Our results indicate that such arrays are feasible electrically.

European Solid-State Circuits Conference (ESSCIRC)•Jan 1, 1977•2 citations
The talk is based on an overview which was published recently (1). For this reason, only an abstract is given here, which includes Later results not contained in the aforementioned overview. The presently-known Josephson memory cells store information as persistent currents in superconducting loops, or what is equivalent as a magnetic flux in the area of the ring. This method of storage is nonvolatile and has no power consumption in the storing state. In a superconducting ring system, the magnetic flux is quantized, and cells have been built which operate either with only one flux quantum, or with many of them. For the Latter cells with many flux quanta (ring cells), quite a number of designs exist. They have one or two Josephson junctions in the ring, which allow writing. An external junction which is controlled by the ring current serves for non-destructive reading of the information. The smallest cell realized had an area of 900 ?m2 with a 2 ?m minimum line width. Switching speed was ? 80 ps. Cells which store information as a single-flux quantum (single flux-quantum cells = SFQ cells) in the ring, usually contain two Josephson junctions used for reading and writing. Read-out in most of these cells is destructive, but methods of reading non-destructively have also been proposed. The smallest device made had an area of ? 150 ?m2 with a minimum line width of 2 ?m. The read signal had a rise time ? 100 ps.
Over the past few decades, superconducting circuits have been used to realize various novel electronic devices such as quantum bits, SQUIDs, parametric amplifiers, etc. One domain, however, where superconducting circuits fall short is information storage. Superconducting memories are based on the quantization of magnetic flux in superconducting loops. Standard implementations store information as magnetic flux quanta in a superconducting loop interrupted by two Josephson junctions (i.e., a SQUID). However, due to the large inductance required, the size of the SQUID loop cannot be scaled below several micrometers, resulting in low-density memory chips. Here, we propose a scalable memory consisting of a voltage-biased superconducting ring threaded by a half-quantum flux bias. By numerically solving the time-dependent Ginzburg-Landau equations, we show that applying a time-dependent bias voltage in the microwave range constitutes a writing mechanism to change the number of stored flux quanta within the ring. Since the proposed device does not require a large loop inductance, it can be scaled down, enabling a high-density memory technology.
Abstract Storage of a single magnetic flux quantum in a superconducting loop containing a Josephson junction represents a promising unit cell configuration for construction of a cryogenic memory of superconducting digital circuits. However, application of a DC bias current is required for operation of such a memory cell to maintain trapping of the flux quantum in the storage loop. In this work, we present a superconducting memory cell that uses a superconducting-magnetic π junction. The cell characteristics show flux quantum hysteresis centering at the zero-bias current. We develop a fabrication process that combines superconductor–ferromagnet–superconductor (SFS) junctions with superconductor–normal metal–superconductor (SNS) junctions. The critical current density of the SFS junctions shows a 0–π oscillation as a function of the ferromagnetic layer thickness. The formation of the π junction is confirmed further by the flux modulation curves of a superconducting quantum interference device made from SNS junctions with an additional SFS junction.
The φ Josephson junction has a doubly degenerate ground state with the Josephson phases ±φ. We demonstrate the use of such a φ Josephson junction as a memory cell (classical bit), where writing is done by applying a magnetic field and reading by applying a bias current. In the “store” state, the junction does not require any bias or magnetic field, but just needs to stay cooled for permanent storage of the logical bit. Straightforward integration with rapid single flux quantum logic is possible.
The design and experimental results for a novel type of Josephson memory cell are presented. The cell has a simpler construction than the conventional Henkels-type, using a one-junction SQUID (superconducting quantum interference device) capacitively coupled to a single junction. Binary data are stored as single flux quanta and are destructively read out by sensing a pulse caused by a vortex-mode transition. Computer simulations suggest that the read operation could be performed with a bias margin for the sense junction of +or-28% and that the rise time of the sense current in a 16-bit memory cell would be as fast as 30 ps, despite having to sense a vortex-mode transition. Results are presented for a memory cell fabricated with Nb-AlO/sub x/-Nb junctions.>