Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Workshop on Physics and Technology of Thin Films (IWTF)

GENERATION AND AMPLIFICATION OF ELECTROMAGNETIC RADIATION BY SUPERCONDUCTING FILMS – A SUPERCONDUCTOR MASER

Alexander N. Lykov

Published Jun 1, 2004• 0 citations
Publisher

Abstract

A new method for the designing of active superconducting elements is developed. The mixed state in the superconducting films is influenced by an alternative magnetic field directed perpendicular to the film surface. The transition of the vortex system into ground state synchronized via electromagnetic interaction with external resonant circuit causes the generation of the electromagnetic radiation. Coherent microwave radiation has been directly detected from superconducting thin films excited by the method described in literature [1-3]. Harmonic mixing and rf amplification are also detected using this approach.

DOI
10.1142/9789812702876_0036

Related papers

Superconducting Maser

Alexander N. Lykov

A new approach to designing active superconducting elements is developed. The mixed state in the superconducting films is influenced by an alternative magnetic field directed perpendicular to the film surface. The field slowly varies in time, and sets up the vortex structure in the film. The interaction of the vortices with planar pinning centers leads to a metastable mixed state, which can bring into the ground state. Such a transition synchronized by an external resonant circuit causes the generation of the electromagnetic radiation. Coherent microwave radiation has been directly detected from superconducting thin films thus excited. Moreover, it is found that the radiation depresses the noise radiation, so that low-frequency noise is transformed into the coherent radiation. Harmonic mixing and amplification of the electromagnetic radiation are also detected. The system resembles a maser in which the energy two-level structure is formed by Abricosov vortices.

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•2 citations

Microwave response of vortices in superconducting thin films of Re and Al

Chao Song, Tom Heitmann, M. P. DeFeo +5 more

Vortices in superconductors driven at microwave frequencies exhibit a response related to the interplay between the vortex viscosity, pinning strength, and flux creep effects. At the same time, the trapping of vortices in superconducting microwave resonant circuits contributes excess loss and can result in substantial reductions in the quality factor. Thus, understanding the microwave vortex response in superconducting thin films is important for the design of such circuits, including superconducting qubits and photon detectors, which are typically operated in small, but nonzero, magnetic fields. By cooling in fields on the order of $100\text{ }\ensuremath{\mu}\text{T}$ and below, we have characterized the magnetic field and frequency dependence of the microwave response of a small density of vortices in resonators fabricated from thin films of Re and Al, which are common materials used in superconducting microwave circuits. Above a certain threshold cooling field, which is different for the Re and Al films, vortices become trapped in the resonators. Vortices in the Al resonators contribute greater loss and are influenced more strongly by flux creep effects than in the Re resonators. This different behavior can be described in the framework of a general vortex dynamics model.

arXiv:0812.3645•Physical Review B•May 8, 2009•172 citations

Flux-flow-type Josephson oscillator for millimeter and submillimeter wave region. IV. Thin-film coupling

Jiaqian Qin, Keiji Enpuku, Keiji Yoshida

Power emission from a flux-flow-type Josephson oscillator with a thin-film coupling method is studied experimentally. The thickness of one electrode of the oscillator is made thin enough to allow electromagnetic fields generated by the oscillator to be emitted through the thin-film electrode. Radiation power from the oscillator is detected with superconductor-insulator-superconductor detectors, which are fabricated on top of the oscillator. Experimental results show that sufficient power can be obtained from the oscillator by using the thin-film coupling method when the thickness of the electrode is comparable to the London penetration depth. The results obtained are in reasonable agreement with theoretical predictions. The thin-film coupling method will be useful when the oscillator is connected to external circuits, such as an impedance matching circuit.

Journal of Applied Physics•Feb 15, 1988•69 citations

Microwave Properties of Vortices in Superconducting Resonators

Chunhua Song

Microwave resonators fabricated from superconducting thin films are playing a critical role with recent advances in superconducting quantum computing technology and photon detectors. There has been an intensive worldwide effort to study the sources of loss that limit the quality factors of these resonators. In this thesis, I have focused on the measurements of the microwave response of vortices in Al and Re superconducting thin film resonators cooled in magnetic fields comparable to or less than that of the Earth. Previous work on vortex dynamics at microwave frequencies has involved large magnetic fields, orders of magnitude larger than the Earth's fields. Al and Re are common materials used in superconducting resonant circuits for qubits and detectors. Despite the similarities of Al and Re superconductors, the microwave vortex response is strikingly different in the two materials from my resonator measurements. I present a quantitative model for the dissipation and reactance contributed by the vortices in terms of the elastic pinning forces and the viscous damping from the vortex cores. The differences in the vortex response in Al and Re were due to the vortex pinning strength in the two films The critical role played by pinning in determining the microwave response motivated us to try to modify the pinning in our Al films by nanostructuring the film surface. A single narrow slot along the center line of a resonator was used to increase the pinning in the resonator traces and resulted in a reduction of the loss from vortices by over an order of magnitude. Such patterned pinning techniques could be used on resonators in systems with insufficient shielding or pulsed control fields to reduce the loss from unwanted trapped vortices. Finally, we explored the possibility for using measurements of the power dependence of the resonators to determine if trapped vortices are present.

•Jan 1, 2011•0 citations

Review of superconducting electronics

R.A. Kamper

This review will sketch the present state of affairs in applications of Josephson junctions and SQUIDs to: magnetometry, DC and RF metrology, detection and amplification of electromagnetic signals, frequency metrology, noise thermometry and computers. It will also mention recent progress in super-stable oscillators using superconducting resonant circuits, pulse transmission lines, and thin-film deviees to detect radiation or charged particles. Many of these topics are maturing nicely.

IEEE Transactions on Magnetics•Mar 1, 1975•7 citations

Fabrication and Characterization of Superconducting Metamaterial Resonators

Haozhi Wang

Superconducting circuits operated at low temperatures have led to rapid advances in quantum information processing as well as quantum optics in the microwave regime. Engineered quantum systems with a dense spectrum of modes coupled to artificial atoms, or qubits, formed from superconducting circuits offer an opportunity to explore large-scale entanglement or perform quantum simulations of many-body phenomena. Recent research efforts into artificial metamaterials have yielded microwave and optical systems with numerous counterintuitive properties, including left-handed transmission, where the group velocity and phase velocity for a wave point in opposite directions. Metamaterial resonators implemented with superconducting thin-film circuits provide a route to generating dense mode spectra in the microwave regime for coupling to qubits. In this thesis, we discuss the implementation of such superconducting metamaterial resonators. First, we derive the dispersion relation for one-dimensional metamaterial transmission lines and we describe the formation of resonators from such lines and their quality factors. Next, we describe the design and fabrication of transmission-line metamaterial resonators using superconducting thin films. We characterize the metamaterials through low-temperature microwave measurements as well as Laser Scanning Microscope (LSM) images of the microwave field distributions in the circuit. We compare these various measurements with numerical simulations of the microwave properties of the circuits, including simulated current density and charge density distributions for the excitation of different resonance modes. Following the successful realization of dense mode spectra in these circuits, we have initiated the first experiments with a superconducting transmon qubit coupled to a metamaterial resonator and we describe our progress in this direction.

•Jan 1, 2018•0 citations
A new method for the designing of active superconducting elements is developed. The mixed state in the superconducting films is influenced by an alternative magnetic field directed perpendicular to the film surface. The transition of the vortex system into ground state synchronized via electromagnetic interaction with external resonant circuit causes the generation of the electromagnetic radiation. Coherent microwave radiation has been directly detected from superconducting thin films excited by the method described in literature [1-3]. Harmonic mixing and rf amplification are also detected using this approach.
A new approach to designing active superconducting elements is developed. The mixed state in the superconducting films is influenced by an alternative magnetic field directed perpendicular to the film surface. The field slowly varies in time, and sets up the vortex structure in the film. The interaction of the vortices with planar pinning centers leads to a metastable mixed state, which can bring into the ground state. Such a transition synchronized by an external resonant circuit causes the generation of the electromagnetic radiation. Coherent microwave radiation has been directly detected from superconducting thin films thus excited. Moreover, it is found that the radiation depresses the noise radiation, so that low-frequency noise is transformed into the coherent radiation. Harmonic mixing and amplification of the electromagnetic radiation are also detected. The system resembles a maser in which the energy two-level structure is formed by Abricosov vortices.
Vortices in superconductors driven at microwave frequencies exhibit a response related to the interplay between the vortex viscosity, pinning strength, and flux creep effects. At the same time, the trapping of vortices in superconducting microwave resonant circuits contributes excess loss and can result in substantial reductions in the quality factor. Thus, understanding the microwave vortex response in superconducting thin films is important for the design of such circuits, including superconducting qubits and photon detectors, which are typically operated in small, but nonzero, magnetic fields. By cooling in fields on the order of $100\text{ }\ensuremath{\mu}\text{T}$ and below, we have characterized the magnetic field and frequency dependence of the microwave response of a small density of vortices in resonators fabricated from thin films of Re and Al, which are common materials used in superconducting microwave circuits. Above a certain threshold cooling field, which is different for the Re and Al films, vortices become trapped in the resonators. Vortices in the Al resonators contribute greater loss and are influenced more strongly by flux creep effects than in the Re resonators. This different behavior can be described in the framework of a general vortex dynamics model.
Power emission from a flux-flow-type Josephson oscillator with a thin-film coupling method is studied experimentally. The thickness of one electrode of the oscillator is made thin enough to allow electromagnetic fields generated by the oscillator to be emitted through the thin-film electrode. Radiation power from the oscillator is detected with superconductor-insulator-superconductor detectors, which are fabricated on top of the oscillator. Experimental results show that sufficient power can be obtained from the oscillator by using the thin-film coupling method when the thickness of the electrode is comparable to the London penetration depth. The results obtained are in reasonable agreement with theoretical predictions. The thin-film coupling method will be useful when the oscillator is connected to external circuits, such as an impedance matching circuit.
Microwave resonators fabricated from superconducting thin films are playing a critical role with recent advances in superconducting quantum computing technology and photon detectors. There has been an intensive worldwide effort to study the sources of loss that limit the quality factors of these resonators. In this thesis, I have focused on the measurements of the microwave response of vortices in Al and Re superconducting thin film resonators cooled in magnetic fields comparable to or less than that of the Earth. Previous work on vortex dynamics at microwave frequencies has involved large magnetic fields, orders of magnitude larger than the Earth's fields. Al and Re are common materials used in superconducting resonant circuits for qubits and detectors. Despite the similarities of Al and Re superconductors, the microwave vortex response is strikingly different in the two materials from my resonator measurements. I present a quantitative model for the dissipation and reactance contributed by the vortices in terms of the elastic pinning forces and the viscous damping from the vortex cores. The differences in the vortex response in Al and Re were due to the vortex pinning strength in the two films The critical role played by pinning in determining the microwave response motivated us to try to modify the pinning in our Al films by nanostructuring the film surface. A single narrow slot along the center line of a resonator was used to increase the pinning in the resonator traces and resulted in a reduction of the loss from vortices by over an order of magnitude. Such patterned pinning techniques could be used on resonators in systems with insufficient shielding or pulsed control fields to reduce the loss from unwanted trapped vortices. Finally, we explored the possibility for using measurements of the power dependence of the resonators to determine if trapped vortices are present.
Superconducting circuits operated at low temperatures have led to rapid advances in quantum information processing as well as quantum optics in the microwave regime. Engineered quantum systems with a dense spectrum of modes coupled to artificial atoms, or qubits, formed from superconducting circuits offer an opportunity to explore large-scale entanglement or perform quantum simulations of many-body phenomena. Recent research efforts into artificial metamaterials have yielded microwave and optical systems with numerous counterintuitive properties, including left-handed transmission, where the group velocity and phase velocity for a wave point in opposite directions. Metamaterial resonators implemented with superconducting thin-film circuits provide a route to generating dense mode spectra in the microwave regime for coupling to qubits. In this thesis, we discuss the implementation of such superconducting metamaterial resonators. First, we derive the dispersion relation for one-dimensional metamaterial transmission lines and we describe the formation of resonators from such lines and their quality factors. Next, we describe the design and fabrication of transmission-line metamaterial resonators using superconducting thin films. We characterize the metamaterials through low-temperature microwave measurements as well as Laser Scanning Microscope (LSM) images of the microwave field distributions in the circuit. We compare these various measurements with numerical simulations of the microwave properties of the circuits, including simulated current density and charge density distributions for the excitation of different resonance modes. Following the successful realization of dense mode spectra in these circuits, we have initiated the first experiments with a superconducting transmon qubit coupled to a metamaterial resonator and we describe our progress in this direction.