Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Photonics Technology Letters

Photonic Frequency Measurement and Signal Separation for Pulsed/CW Microwave Signals

Bing Lü, Wei Pan, Xihua Zou, Bin Luo, Lianshan Yan, Xinkai Liu, Shuiying Xiang

Published Jan 15, 2013• 24 citations
Publisher

Abstract

A novel photonic approach to simultaneously implement frequency measurement and signal separation is proposed and experimentally demonstrated for pulsed and continuous-wave (CW) microwave signals. In this approach, a light wave is externally modulated with carrier suppressed by a pulsed or CW microwave signal to be measured, and then sent to two optical complementary filters to perform frequency-to-amplitude mapping. The outputs of the two filters are detected by low-speed photodetectors, low-frequency alternating currency (AC) electronic component and direct current (DC) one being generated. The carrier frequency of the pulsed microwave signal can be estimated by monitoring the power of the AC component, while the frequency of the CW microwave signal is discriminated from the power of the DC component, with the frequency measurement and the signal separation simultaneously realized. In proof-of-concept experiments, within the frequency range from 5 to 20 GHz, measurement errors less than ±0.1, ±0.11 , or ±0.13 GHz are achieved for a pulsed signal with pulse repetition frequency of 0.25, 0.5, or 1 MHz, whereas the errors less than ±0.08 GHz are derived for a CW signal.

DOI
10.1109/lpt.2013.2238920

Related papers

Photonic-Assisted Multi-Tone Microwave Frequency Measurement Based on Pulse Identification

Xiaobing Xie, Chao Luo, Huiyun Tang +3 more

We report a photonic-assisted method for measuring the frequencies of a multi-tone microwave with high accuracy based on pulse identification. The unknown microwave signal and a linearly chirped signal are modulated to an optical carrier using a dual-polarization Mach–Zehnder modulator. Carrier-suppressed single-sideband modulation avoids the generation of undesired frequency components after photodetection. An electrical bandpass filter with a narrow bandwidth selects the beat signal between the unknown signal and the linearly chirped optical tone. A pulse, generated by the beat signal, can be observed using an oscilloscope (OSC). By identifying the beating pulse position, we can accurately determine the frequency of the unknown signal. The single-tone and multi-tone microwave signal ranges of 6–16 GHz and 26–36 GHz are successfully measured, respectively. The measurement errors for single-tone and multi-tone signals are both less than ±1 MHz.

Photonics•Dec 24, 2024•4 citations

Cross-referenced deadband-free microwave frequency measurement with cascaded-four-wave-mixing-based photonic harmonic down-conversion

Xinhai Zou, Shangjian Zhang, Heng Wang +4 more

A cross-referenced and deadband-free method with photonic harmonic down-conversion is proposed for microwave frequency measurement based on cascaded-four-wave-mixing (CFWM) in semiconductor optical amplifiers. The proposed method enables ultra-wide and accurate frequency measurement with low-frequency spectrum detection, and at the same time achieves deadband-free and multi-tone frequency measurement by cross-referenced frequency discrimination. For a proof of concept, microwave signal measurement is experimentally demonstrated up to the 40 GHz frequency range with an 0.2-MHz measurement error. The frequency measurement features ease of configuration by only changing the low-frequency electrical local oscillators of the CFWM-based photonic harmonic down-converter.

Optics Express•Aug 5, 2019•7 citations

Wideband microwave measurement based on single-channel mapping and image-rejection mixing

Yuzheng Jiang, Jing Li, Cheng Tian +3 more

A filterless microwave photonic-assisted frequency measurement scheme for instant broadband RF signal measurement is proposed and analyzed. The scheme employs single-channel mapping to save signal processing time. The channelized receiver is divided into upper and lower branches, generating a non-flat optical frequency comb and achieving single-sideband modulation, respectively. Through image-rejection mixing, the powers of the beating frequencies and the optical frequency comb lines are combined to determine the signal range, and the signal frequency can be accurately calculated. Simulations demonstrate that this scheme can measure multi-frequency and linearly frequency-modulated signals within the range of 0-40 GHz. The system has been experimentally validated with a measurement error of less than 25 MHz.

Applied Optics•Feb 12, 2025•0 citations

A proof-of-principle demonstration of quantum microwave photonics

Yaqing Jin, Ye Yang, Huibo Hong +7 more

With the rapid development of microwave photonics, which has expanded to numerous applications of commercial importance, eliminating the emerging bottlenecks becomes of vital importance. For example, as the main branch of microwave photonics, radio-over-fiber technology provides high bandwidth, low-loss, and long-distance propagation capability, facilitating wide applications ranging from telecommunication to wireless networks. With ultrashort pulses as the optical carrier, huge capacity is further endowed. However, the wide bandwidth of ultrashort pulses results in the severe vulnerability of high-frequency RF signals to fiber dispersion. With a time-energy entangled biphoton source as the optical carrier and combined with the single-photon detection technique, a quantum microwave photonics method is proposed and demonstrated experimentally. The results show that it not only realizes unprecedented nonlocal RF signal modulation with strong resistance to the dispersion associated with ultrashort pulse carriers but provides an alternative mechanism to effectively distill the RF signal out from the dispersion. Furthermore, the spurious-free dynamic range of both the nonlocally modulated and distilled RF signals has been significantly improved. With the ultra-weak detection and high-speed processing advantages endowed by the low-timing-jitter single-photon detection, the quantum microwave photonics method opens up new possibilities in modern communication and networks.

arXiv:2201.12106•Jan 28, 2022•2 citations

Continuous-wave AC magnetometry up to hundreds of megahertz using nitrogen-vacancy centers under a strong transverse magnetic field

Ryusei Okaniwa, Rui Suzuki, Yuichiro Matsuzaki +2 more

Nitrogen-vacancy (NV) centers in diamond are promising quantum sensors for AC magnetic fields. However, conventional dynamical-decoupling-based magnetometry becomes technically demanding at high frequencies because of the requirement for increasingly short and high-power microwave pulses. This paper describes an AC magnetometry technique based on continuous-wave optically detected magnetic resonance (CW-ODMR) measurements, which enables the detection of signals in the hundred-MHz range. By applying a strong static magnetic field transverse to the NV axis, the energy separation between the relevant electron-spin states was tuned and resonantly coupled with the target radiofrequency (RF) magnetic field, thereby forming RF-dressed states. Unlike pulsed dynamical-decoupling schemes, this approach does not require high-power microwave pulse sequences. The key feature of our method is that the detectable frequency can be tuned by controlling the bias magnetic field strength. Using this methodology, we have experimentally achieved the frequency-tunable detection of AC magnetic fields from 14.4-632 MHz. The sensitivity was 0.558 uT/Hz^(0.5) at 14.4 MHz and 24.4 uT/Hz^(0.5) at 632 MHz. We characterized the field-dependent ODMR contrast and linewidth, and found that their degradation at large transverse fields is a important factor limiting the high-frequency sensitivity. These results establish a simple CW-ODMR approach for widely tunable RF magnetic-field sensing without high-power pulsed spin control.

quant-pharXiv:2610.13153•Oct 12, 2026•0 citations

Quantum microwave photonics in radio-over-fiber systems

Yaqing Jin, Yang Ye, Huibo Hong +7 more

As the main branch of microwave photonics, radio-over-fiber technology provides high bandwidth, low-loss, and long-distance propagation capability, facilitating wide applications ranging from telecommunication to wireless networks. With ultrashort pulses as the optical carrier, a large capacity is further endowed. However, the wide bandwidth of ultrashort pulses results in the severe vulnerability of high-frequency radio frequency (RF) signals to fiber dispersion. With a time-energy entangled biphoton source as the optical carrier combined with the single-photon detection technique, a quantum microwave photonics method in radio-over-fiber systems is proposed and demonstrated experimentally. The results show that it not only realizes unprecedented nonlocal RF signal modulation with strong resistance to the dispersion but also provides an alternative mechanism to distill the RF signal out from the dispersion effectively. Furthermore, the spurious-free dynamic ranges of the nonlocally modulated and distilled RF signals have been significantly improved. With the ultra-weak detection and the high-speed processing advantages endowed by the low-timing-jitter single-photon detection, the quantum microwave photonics method opens new possibilities in modern communication and networks.

Photonics Research•May 19, 2022•16 citations
A novel photonic approach to simultaneously implement frequency measurement and signal separation is proposed and experimentally demonstrated for pulsed and continuous-wave (CW) microwave signals. In this approach, a light wave is externally modulated with carrier suppressed by a pulsed or CW microwave signal to be measured, and then sent to two optical complementary filters to perform frequency-to-amplitude mapping. The outputs of the two filters are detected by low-speed photodetectors, low-frequency alternating currency (AC) electronic component and direct current (DC) one being generated. The carrier frequency of the pulsed microwave signal can be estimated by monitoring the power of the AC component, while the frequency of the CW microwave signal is discriminated from the power of the DC component, with the frequency measurement and the signal separation simultaneously realized. In proof-of-concept experiments, within the frequency range from 5 to 20 GHz, measurement errors less than ±0.1, ±0.11 , or ±0.13 GHz are achieved for a pulsed signal with pulse repetition frequency of 0.25, 0.5, or 1 MHz, whereas the errors less than ±0.08 GHz are derived for a CW signal.
We report a photonic-assisted method for measuring the frequencies of a multi-tone microwave with high accuracy based on pulse identification. The unknown microwave signal and a linearly chirped signal are modulated to an optical carrier using a dual-polarization Mach–Zehnder modulator. Carrier-suppressed single-sideband modulation avoids the generation of undesired frequency components after photodetection. An electrical bandpass filter with a narrow bandwidth selects the beat signal between the unknown signal and the linearly chirped optical tone. A pulse, generated by the beat signal, can be observed using an oscilloscope (OSC). By identifying the beating pulse position, we can accurately determine the frequency of the unknown signal. The single-tone and multi-tone microwave signal ranges of 6–16 GHz and 26–36 GHz are successfully measured, respectively. The measurement errors for single-tone and multi-tone signals are both less than ±1 MHz.
A cross-referenced and deadband-free method with photonic harmonic down-conversion is proposed for microwave frequency measurement based on cascaded-four-wave-mixing (CFWM) in semiconductor optical amplifiers. The proposed method enables ultra-wide and accurate frequency measurement with low-frequency spectrum detection, and at the same time achieves deadband-free and multi-tone frequency measurement by cross-referenced frequency discrimination. For a proof of concept, microwave signal measurement is experimentally demonstrated up to the 40 GHz frequency range with an 0.2-MHz measurement error. The frequency measurement features ease of configuration by only changing the low-frequency electrical local oscillators of the CFWM-based photonic harmonic down-converter.
A filterless microwave photonic-assisted frequency measurement scheme for instant broadband RF signal measurement is proposed and analyzed. The scheme employs single-channel mapping to save signal processing time. The channelized receiver is divided into upper and lower branches, generating a non-flat optical frequency comb and achieving single-sideband modulation, respectively. Through image-rejection mixing, the powers of the beating frequencies and the optical frequency comb lines are combined to determine the signal range, and the signal frequency can be accurately calculated. Simulations demonstrate that this scheme can measure multi-frequency and linearly frequency-modulated signals within the range of 0-40 GHz. The system has been experimentally validated with a measurement error of less than 25 MHz.
With the rapid development of microwave photonics, which has expanded to numerous applications of commercial importance, eliminating the emerging bottlenecks becomes of vital importance. For example, as the main branch of microwave photonics, radio-over-fiber technology provides high bandwidth, low-loss, and long-distance propagation capability, facilitating wide applications ranging from telecommunication to wireless networks. With ultrashort pulses as the optical carrier, huge capacity is further endowed. However, the wide bandwidth of ultrashort pulses results in the severe vulnerability of high-frequency RF signals to fiber dispersion. With a time-energy entangled biphoton source as the optical carrier and combined with the single-photon detection technique, a quantum microwave photonics method is proposed and demonstrated experimentally. The results show that it not only realizes unprecedented nonlocal RF signal modulation with strong resistance to the dispersion associated with ultrashort pulse carriers but provides an alternative mechanism to effectively distill the RF signal out from the dispersion. Furthermore, the spurious-free dynamic range of both the nonlocally modulated and distilled RF signals has been significantly improved. With the ultra-weak detection and high-speed processing advantages endowed by the low-timing-jitter single-photon detection, the quantum microwave photonics method opens up new possibilities in modern communication and networks.
Nitrogen-vacancy (NV) centers in diamond are promising quantum sensors for AC magnetic fields. However, conventional dynamical-decoupling-based magnetometry becomes technically demanding at high frequencies because of the requirement for increasingly short and high-power microwave pulses. This paper describes an AC magnetometry technique based on continuous-wave optically detected magnetic resonance (CW-ODMR) measurements, which enables the detection of signals in the hundred-MHz range. By applying a strong static magnetic field transverse to the NV axis, the energy separation between the relevant electron-spin states was tuned and resonantly coupled with the target radiofrequency (RF) magnetic field, thereby forming RF-dressed states. Unlike pulsed dynamical-decoupling schemes, this approach does not require high-power microwave pulse sequences. The key feature of our method is that the detectable frequency can be tuned by controlling the bias magnetic field strength. Using this methodology, we have experimentally achieved the frequency-tunable detection of AC magnetic fields from 14.4-632 MHz. The sensitivity was 0.558 uT/Hz^(0.5) at 14.4 MHz and 24.4 uT/Hz^(0.5) at 632 MHz. We characterized the field-dependent ODMR contrast and linewidth, and found that their degradation at large transverse fields is a important factor limiting the high-frequency sensitivity. These results establish a simple CW-ODMR approach for widely tunable RF magnetic-field sensing without high-power pulsed spin control.
As the main branch of microwave photonics, radio-over-fiber technology provides high bandwidth, low-loss, and long-distance propagation capability, facilitating wide applications ranging from telecommunication to wireless networks. With ultrashort pulses as the optical carrier, a large capacity is further endowed. However, the wide bandwidth of ultrashort pulses results in the severe vulnerability of high-frequency radio frequency (RF) signals to fiber dispersion. With a time-energy entangled biphoton source as the optical carrier combined with the single-photon detection technique, a quantum microwave photonics method in radio-over-fiber systems is proposed and demonstrated experimentally. The results show that it not only realizes unprecedented nonlocal RF signal modulation with strong resistance to the dispersion but also provides an alternative mechanism to distill the RF signal out from the dispersion effectively. Furthermore, the spurious-free dynamic ranges of the nonlocally modulated and distilled RF signals have been significantly improved. With the ultra-weak detection and the high-speed processing advantages endowed by the low-timing-jitter single-photon detection, the quantum microwave photonics method opens new possibilities in modern communication and networks.