Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

European Microwave Conference (EuMC)

A Very Low Noise Quasiparticle (SIS) Mixer Receiver for Radio Astronomical Applications

Lars‐Erik Olsson, S. Rudner, E. Kollberg, C.O. Lindstrom

Published Sep 1, 1982• 5 citations
Publisher

Abstract

A Superconducting quasiparticle mixer receiver for 35-50 GHz is described. An array of six Pb In-oxide-Pb0.7Bi0.3tunnel junctions with 40 Ω array normal resistance and a shunt capacitance of 0.2 pF is used. The mixer is immersed into liquid helium and operated at 2 K. A 3.7-4.2 GHz parametric amplifier, also at 2 K is used as the if amplifier. The high if frequency allows single sideband operation with a system noise temperature of 140 K at 47 GHz. A lens guide is used for guiding the signal from the Cassegrain telescope focus to the liquid helium cooled lens corrugated horn and the mixer. The SSB system noise temperature varies rather smoothly from ≈ 220 K at 35 GHz to ≈ 140 K at 50 GHz suggesting that quantum gain effects are becoming more important at the high frequency end. The receiver is operational in the 20 m mm-wave telescope at the Onsala Space Observatory.

DOI
10.1109/euma.1982.333174

Related papers

A 200-300 GHz single sideband SIS mixer for radio astronomy

Alexandre Karpov, J. Blondel, Dominique Billon-Pierron +1 more

We present an ultra broadband low noise single sideband (SSB) SIS mixer developed for 200-300 GHz radio astronomy receivers. The mixer uses two Nb/AlO/sub x//Nb junctions. Image band rejection by 20 dB is provided in the entire 200-300 GHz band using a mechanical tuning of the single noncontacting backshort in the mixer. The SIS receiver SSB noise temperature is close to 50 K in the main part of the band. A speed-up of the observations at radio telescopes by a factor 2-3 is expected with the new receiver.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•2 citations

Wide-Band, Ultra Low Noise MM-Wave Mixers with a Single Tuning Element

Antti V. Räisänen, Denis Crété, P. L. Richards +1 more

Several SIS quasiparticle mixers have been designed and tested for the frequency range from 80 to 115 GHz. The sliding back short is the only adjustable RF-tuning element. The RF-filter reactance is used a s a fixed RF-matching element. A mixer which uses a single 2 × 2 μm2Pb-alloy junction in a 1/4-height waveguide mount has a coupled conversion gain of GM(DSB) = 2.6 ± 0.5 dB with an associated noise temperature of TM(DSB) = 16.4 ± 1.8 K at the best DSB operation point. The receiver noise temperature TR(DSB) is 27.5 ± 0.8 K for the test apparatus. This mixer provides a SSB receiver noise temperature below 50 K over the frequency range from 91 to 96 GHz, the minimum being TR(SSB) = 44 ± 4 K. Another mixer with an array of five 5 × 5 μm2junctions in series has much lower noise TM(DSB) = 6.6 ± 1.6 K, but less gain GM(DSB) = -5.1 ± 0.5 dB.

European Microwave Conference (EuMC)•Sep 1, 1986•2 citations

Four photons sensitivity heterodyne detection of submillimeter radiation with superconducting tunnel junctions

Alexandre Karpov, J. Blondel, M. Voß +1 more

An ultra low noise SIS receiver has been prepared for radio astronomy. The minimum double sideband receiver noise temperature is about 30 K which corresponds to 2 /spl planck//spl omega//k or an equivalent number of 4 photons of noise. The minimum measured double sideband mixer noise temperature is about 10 K which corresponds to 0.6 /spl planck//spl omega//k or approximately to 1 photon of noise. The fixed tuned SIS mixer operates in the 290-370 GHz frequency range. The submicron niobium junctions mere fabricated using photoresist lines for junction definition. The receiver has been used at the 30 m IRAM radio telescope in Spain in winter 1994. Telescope system noise temperature of 500 K single sideband has been achieved when the sky opacity was about 0.17.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•24 citations

Accurate noise measurements of superconducting quasiparticle array mixers

William R. McGrath, Antti V. Räisänen, P. L. Richards +2 more

We have constructed a 30-40 GHz test apparatus which allows us to measure the noise temperatures of SIS mixers with an accuracy of better than ±1K. This is a factor of six improvement over earlier measurements. The most accurate measurement made thus far of a mixer which uses a single Pb-alloy junction yielded Tm= 9.2 ± 0.9 K; and mixer gain: Gm= 0.240 ± 0.005. In addition, SIS mixers employing arrays of N = 1, 5, 10, 25, and 50 tunnel junctions in series have been tested. The input power required to saturate the array mixers was found to increase as N2and the gain and noise temperature of the array mixers were independent of N.

IEEE Transactions on Magnetics•Mar 1, 1985•36 citations

A planar quasi-optical SIS receiver

P. A. Stimson, Robert J. Dengler, Henry George LeDuc +2 more

A planar, quasi-optical SIS (superconductor-insulator-superconductor) receiver operating at 230 GHz is described. The receiver consists of a 2*5 array of half-wave dipole antennas with niobium-aluminum oxide-niobium SIS junctions on a quartz dielectric-filled parabola. The 1.4-GHz intermediate frequency is coupled from the mixer via coplanar strip transmission lines and 4:1 balun transformers. The receiver is operated at 4.2 K in a liquid helium immersion cryostat. Accurate measurements of the performance of single untuned array receiver elements are reported. A mixer noise temperature of 89 K DSB (double sideband), receiver noise temperature of 156 K DSB and conversion loss of 8 dB into a matched load have been obtained. This mixer noise temperature is approximately a factor of two larger than that of current state of the art waveguide mixers using untuned single junctions a the same frequency.>

IEEE Transactions on Microwave Theory and Techniques•Apr 1, 1993•15 citations

Multibeam SIS mixer module for a focal plane array receiver

Alexandre Karpov, J. Blondel, M. C. Carter +3 more

The integration of many receiver units into a receiver array is a common method of improvement of imaging systems. This approach, well known in the mm band for Schottky mixer arrays, has not so far been developed for Superconductor-Insulator- Superconductor (SIS) junction mixers, which give the best sensitivity in the short mm wave range and in the submm range. We demonstrate for the first time a practical low noise multibeam receiver module using SIS mixer technology. The module comprises three identical SIS mixers integrated with a common local oscillator, coupled through a three branch waveguide directional coupler. The multibeam module has been developed for a focal plane array receiver of the 30 meter radio telescope of the Institut de Radioastronomie Millimetrique (IRAM). Three such modules will be used in a 3 X 3 array operating near 230 GHz frequency. We discuss the requirements on the performance of the multibeam receiver module and compare it with a single beam receiver arrangement. After the presentation of a single mixer receiver operation the performance of the three mixer module is described. The basis for the integration of several SIS mixers with a common local oscillator source is given by the saturation of the SIS receiver noise dependence upon local oscillator power. The 1.3 mm SIS mixer block is built with a reduced height waveguide. The individual SIS junction area is 2.2 micrometer2 with a Josephson critical current density of about 3.6 KA/cm2. The minimum SSB receiver noise temperature at 230 GHz in a single beam receiver is as low as 50 K. In the module a common local oscillator power source is connected to the three mixers through a common three branch directional coupler. The performance of the three mixers is nearly identical across the 200 - 250 GHz band. The minimum DSB receiver noise temperature of 37 K is obtained simultaneously in all three channels around 230 GHz.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jul 31, 1998•1 citation
A Superconducting quasiparticle mixer receiver for 35-50 GHz is described. An array of six Pb In-oxide-Pb0.7Bi0.3tunnel junctions with 40 Ω array normal resistance and a shunt capacitance of 0.2 pF is used. The mixer is immersed into liquid helium and operated at 2 K. A 3.7-4.2 GHz parametric amplifier, also at 2 K is used as the if amplifier. The high if frequency allows single sideband operation with a system noise temperature of 140 K at 47 GHz. A lens guide is used for guiding the signal from the Cassegrain telescope focus to the liquid helium cooled lens corrugated horn and the mixer. The SSB system noise temperature varies rather smoothly from ≈ 220 K at 35 GHz to ≈ 140 K at 50 GHz suggesting that quantum gain effects are becoming more important at the high frequency end. The receiver is operational in the 20 m mm-wave telescope at the Onsala Space Observatory.
We present an ultra broadband low noise single sideband (SSB) SIS mixer developed for 200-300 GHz radio astronomy receivers. The mixer uses two Nb/AlO/sub x//Nb junctions. Image band rejection by 20 dB is provided in the entire 200-300 GHz band using a mechanical tuning of the single noncontacting backshort in the mixer. The SIS receiver SSB noise temperature is close to 50 K in the main part of the band. A speed-up of the observations at radio telescopes by a factor 2-3 is expected with the new receiver.
Several SIS quasiparticle mixers have been designed and tested for the frequency range from 80 to 115 GHz. The sliding back short is the only adjustable RF-tuning element. The RF-filter reactance is used a s a fixed RF-matching element. A mixer which uses a single 2 × 2 μm2Pb-alloy junction in a 1/4-height waveguide mount has a coupled conversion gain of GM(DSB) = 2.6 ± 0.5 dB with an associated noise temperature of TM(DSB) = 16.4 ± 1.8 K at the best DSB operation point. The receiver noise temperature TR(DSB) is 27.5 ± 0.8 K for the test apparatus. This mixer provides a SSB receiver noise temperature below 50 K over the frequency range from 91 to 96 GHz, the minimum being TR(SSB) = 44 ± 4 K. Another mixer with an array of five 5 × 5 μm2junctions in series has much lower noise TM(DSB) = 6.6 ± 1.6 K, but less gain GM(DSB) = -5.1 ± 0.5 dB.
An ultra low noise SIS receiver has been prepared for radio astronomy. The minimum double sideband receiver noise temperature is about 30 K which corresponds to 2 /spl planck//spl omega//k or an equivalent number of 4 photons of noise. The minimum measured double sideband mixer noise temperature is about 10 K which corresponds to 0.6 /spl planck//spl omega//k or approximately to 1 photon of noise. The fixed tuned SIS mixer operates in the 290-370 GHz frequency range. The submicron niobium junctions mere fabricated using photoresist lines for junction definition. The receiver has been used at the 30 m IRAM radio telescope in Spain in winter 1994. Telescope system noise temperature of 500 K single sideband has been achieved when the sky opacity was about 0.17.>
We have constructed a 30-40 GHz test apparatus which allows us to measure the noise temperatures of SIS mixers with an accuracy of better than ±1K. This is a factor of six improvement over earlier measurements. The most accurate measurement made thus far of a mixer which uses a single Pb-alloy junction yielded Tm= 9.2 ± 0.9 K; and mixer gain: Gm= 0.240 ± 0.005. In addition, SIS mixers employing arrays of N = 1, 5, 10, 25, and 50 tunnel junctions in series have been tested. The input power required to saturate the array mixers was found to increase as N2and the gain and noise temperature of the array mixers were independent of N.
A planar, quasi-optical SIS (superconductor-insulator-superconductor) receiver operating at 230 GHz is described. The receiver consists of a 2*5 array of half-wave dipole antennas with niobium-aluminum oxide-niobium SIS junctions on a quartz dielectric-filled parabola. The 1.4-GHz intermediate frequency is coupled from the mixer via coplanar strip transmission lines and 4:1 balun transformers. The receiver is operated at 4.2 K in a liquid helium immersion cryostat. Accurate measurements of the performance of single untuned array receiver elements are reported. A mixer noise temperature of 89 K DSB (double sideband), receiver noise temperature of 156 K DSB and conversion loss of 8 dB into a matched load have been obtained. This mixer noise temperature is approximately a factor of two larger than that of current state of the art waveguide mixers using untuned single junctions a the same frequency.>
The integration of many receiver units into a receiver array is a common method of improvement of imaging systems. This approach, well known in the mm band for Schottky mixer arrays, has not so far been developed for Superconductor-Insulator- Superconductor (SIS) junction mixers, which give the best sensitivity in the short mm wave range and in the submm range. We demonstrate for the first time a practical low noise multibeam receiver module using SIS mixer technology. The module comprises three identical SIS mixers integrated with a common local oscillator, coupled through a three branch waveguide directional coupler. The multibeam module has been developed for a focal plane array receiver of the 30 meter radio telescope of the Institut de Radioastronomie Millimetrique (IRAM). Three such modules will be used in a 3 X 3 array operating near 230 GHz frequency. We discuss the requirements on the performance of the multibeam receiver module and compare it with a single beam receiver arrangement. After the presentation of a single mixer receiver operation the performance of the three mixer module is described. The basis for the integration of several SIS mixers with a common local oscillator source is given by the saturation of the SIS receiver noise dependence upon local oscillator power. The 1.3 mm SIS mixer block is built with a reduced height waveguide. The individual SIS junction area is 2.2 micrometer2 with a Josephson critical current density of about 3.6 KA/cm2. The minimum SSB receiver noise temperature at 230 GHz in a single beam receiver is as low as 50 K. In the module a common local oscillator power source is connected to the three mixers through a common three branch directional coupler. The performance of the three mixers is nearly identical across the 200 - 250 GHz band. The minimum DSB receiver noise temperature of 37 K is obtained simultaneously in all three channels around 230 GHz.