Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Excess noise in thin film grain boundary Josephson junctions and devices

L Hao, J.C. Macfarlane, Colin M. Pegrum

Published Aug 1, 1996• 34 citations
Publisher

Abstract

The subject of electronic noise in high- superconducting Josephson devices and in their applications is considered. Several types of grain boundary junctions, prepared in different ways by four separate international laboratories, are fully characterized in terms of their electrical and noise properties at a range of temperatures, frequencies, magnetic fields and in the presence of microwaves. Similar characterization is carried out for multijunction Josephson flux-flow arrays, and bi-epitaxial SQUIDs. The theory of Likharev and Semenov for thermal noise in low- junctions is adopted as a reference against which excess noise can be identified in high- junctions. It is combined with theoretical models of excess noise based on fluctuations of critical current and resistance to provide accurate fitting of the observed noise curves. It is shown that the normalized levels of critical current and normal resistance fluctuations for all of the junction types examined are remarkably close (typically around and at 100 Hz) and are nearly independent of temperature in the range T = 30 - 80 K. The frequency dependence is close to the universal 1/f law with some deviations due to trapping of charge carriers at discrete states in the tunnelling barrier. Measurements of voltage noise levels and critical current fluctuations in multijunction flux-flow amplifiers, reported for the first time, are consistent with levels in single junctions of the same type. Excess noise is studied as a function of external magnetic field, in a way that has not been previously described. A new interpretation of the magnetic field-dependent noise data indicates that absolute levels of critical current fluctuations are nearly independent of applied magnetic field. This observation does not appear to have been reported elsewhere. It has important implications for the operation of grain boundary Josephson devices in real applications. Voltage noise in the presence of microwave irradiation, at operating points between Shapiro steps, is consistent with a modified form of the Likharev - Semenov equation which takes into account the known level of critical current fluctuations as measured in field-free conditions. The implications of these results for further improvements in device performance are discussed, and directions for further work are suggested.

DOI
10.1088/0953-2048/9/8/010

Related papers

Flicker (1/f) Noise in 45^± Bi-Epitaxial Grain Boundary Junctions and dc SQUID of YBa2Cu3Oy

Baodian Yao, S.-H. Tsai, C. C. +1 more

Wehavefabricated dc superconductingquantuminterferencedevices (SQUIDs) incorpo-rating 45 ± bi-epitaxial grain boundary junction, i.e. YBCO/YSZ and YBCO/YBCO/YSZ, in washer geometry. The1=f noise power of single junction comes fromresistance fluctuation for high current bias andcritical current fluctuation for low current bias. Thenoisespectrum of thedcSQUIDswasmeasuredwithdcandacbiasschemesandshowedvalueof » 1 £ 10 ¡ 5 © 0/Hz1=2 at 100 Hz. The possible noise sources, critical current fluctuations, flux motion noise and resistance fluctuation, are investigated. The results are compared with previous published data. PACS. 85.25.Cp – Josephson devices. PACS. 85.25.Dq – Superconducting quantuminterferencedevices (SQUIDs).

Chinese Journal of Physics•Apr 1, 2000•0 citations

Low-frequency excess noise in SQUIDS with YBa2Cu3O7step-edge junctions

V. N. Glyantsev, M. Siegel, Jürgen Schubert +2 more

We have fabricated RF and DC SQUIDS with step-edge Josephson junctions (SEJ) and YBa 2 Cu 3 O 7 thin films. The low-frequency noise of these SQUIDS has been investigated as a function of temperature, bias current and magnetic field. Typically, the energy resolution in the white noise region of the DC SQUIDS with an inductance of 45 pH was 3*10 -30 J Hz -1 at 77.5 K. Depending on the bias current, the low-frequency spectrum could be of either 1/f type or Lorentzian type. The Lorentzian spectrum was generated by random telegraph signals (RTSS). An Arrhenius plot was obtained from the temperature dependence of the switching time of these RTSS. We have determined two barrier lengths of 0.23 eV and 1 eV of the two-level fluctuator (TLF) generating this RTS noise. From the magnetic-field dependence of the low-frequency noise we have found that the noise is periodic with the flux corresponding to the area of the SEJ. The results were discussed in terms of a model treating the SEJ as a multi-junction interferometer which forms a two-level fluctuator when the junction is placed inside a SQUID loop. The noise is generated by thermally activated switching of the SQUID between the two different states of the SQUID.

Superconductor Science and Technology•May 1, 1994•11 citations

Noise performance of superconductive magnetometers based on long Josephson tunnel junctions

C. Granata, Antonio Vettoliere, R. Monaco

The low-current fluctuations at cryogenic temperatures together with the low dynamical resistance in the resonant states of Josephson tunnel junctions allow for the realization of superconducting oscillators up to the THz range with ultra-low spectral linewidth. By virtue of the Josephson frequency-voltage relationship, we show that the same properties can be exploited for the practical realization of magnetic flux-to-voltage transducers based on the flux–flow in long Josephson tunnel junctions whose intrinsic low-frequency voltage fluctuations at amount to few , that is, too small to be measured by any present semiconductor electronics. Nevertheless, by using a double transformer SQUID amplifier we demonstrate that the (amplitude) voltage spectral density, , of an all-niobium sensor does not exceed the level of and is not affected by excess noise at least down to few hertz. Such ultra-low white noise, corresponding to a magnetic field noise , together with a highly linear and broadband voltage responsivity over a wide magnetic flux range, makes the flux–flow magnetometers potentially competitive with SQUID-based devices.

Superconductor Science and Technology•Aug 12, 2014•8 citations

Intrinsic noise temperatures of YBa2Cu3O7−δ Josephson devices on bicrystal substrates and the upper frequency limit for their operation

J. Chen, Hiroaki Myoren, Kensuke Nakajima +2 more

Following a method proposed by Divin and Modovets [Sov. Tech. Phys. Lett. 9, 108 (1983)], we have measured at millimeter waveband the intrinsic noise temperatures TN of YBa2Cu3O7−δ Josephson junctions or dc superconducting quantum interference devices (SQUIDs) fabricated on SrTiO3, yttria-stabilized ZrO2, or Si bicrystal substrates. Over wide ranges of physical temperatures TP and the junction’s normal resistance RN, it was found that TN follows TP pretty well. This indicates that the intrinsic noise in the devices is dominated by Johnson noise. TN was also measured in cases where there is external magnetic field applied, or where there is another microwave radiation like the local oscillator in a mixer. The magnetic field or microwave radiation does not seem to affect TN in any appreciable way. To estimate the high frequency performance of the junctions on Si bicrystal substrates, direct irradiation by a far infrared laser at 1.81 THz is carried out and the clear first Shapiro step is observed.

Journal of Applied Physics•Dec 1, 1996•8 citations

Magnetic flux noise in SQUIDs and qubits

Steven M. Anton

For over three decades, the presence of magnetic flux noise with a power spectral density scaling roughly as $S_Phi(f) propto 1/f^alpha$, where $alpha lesssim 1$, has been known to limit the low-frequency performance of dc superconducting quantum interference devices (SQUIDs). In recent years, experiments indicate that this same noise persists to frequencies up to 1~GHz and is a dominant source of dephasing in flux-sensitive superconducting quantum bits (qubits). Thus, the reduction of flux noise presents a major hurdle towards the successful realization of scalable quantum computers that are based on flux-based qubits. In this thesis, we present experimental measurements, theoretical analyses, and numerical simulations that support a more detailed understanding of both the microscopic and macroscopic properties of flux noise.Our experimental work begins with flux noise measurements of a large number of SQUIDs in the temperature range from 0.1~K to 4~K. We report on measurements of ten SQUIDs with systematically varied geometries and show that $alpha$ increases as the temperature is lowered; in so doing, each spectrum pivots about a nearly constant frequency. The mean square flux noise, inferred by integrating the power spectra, grows rapidly with temperature and at a given temperature is approximately independent of the outer dimension of a given SQUID washer. We show that these results are incompatible with a model based on the random reversal of independent, spins that are located at the surface of the SQUID washer.In the course of our flux noise measurements, we became aware of a spurious contribution to low-frequency critical current noise in Josephson junctions---normally attributed to charge trapping in the barrier---arising from temperature instabilities inherent in cryogenic systems. These temperature fluctuations modify the critical current via its temperature dependence. By computing cross-correlations between measured temperature and critical current noise in Al-AlOx-Al junctions, we show that, despite excellent temperature stability, temperature fluctuations induce observable critical current fluctuations. Particularly, because $1/f$ critical current noise has decreased with improved fabrication techniques in recent years, it is important to understand and eliminate this additional noise source.Next, we introduce a numerical method of calculating the mean square flux noise $Phisq$ from independently fluctuating spins on the surface of thin-film loops of arbitrary geometry. By reciprocity, $Phisq$ is proportional to $langleBbf(rbf)^2rangle$, where $Bbf(rbf)$ is the magnetic field generated by a circulating current around the loop and $rbf$ varies over the loop surface. By discretizing the loop nonuniformly, we efficiently and accurately compute the current distribution and resulting magnetic field, which may vary rapidly across the loop. We use this method to compute $Phisq$ in a number of scenarios in which we systematically vary physical parameters of the loop. We compare our simulations to an earlier analytic result predicting that $Phisq propto R/W$ in the limit where the loop radius $R$ is much greater than the linewidth $W$. We further show that the previously neglected contribution of edge spins to $Phisq$ is significant---even dominant---in narrow-linewidth loops.To calculate theoretical dephasing rates in qubits, we consider flux noise with a spectral density $S_Phi(f) = A^2/(f/1~hbox{Hz})^alpha$, where $A$ is of the order of 1~$muPhi_0 , hbox{Hz}^{-1/2}$ and $0.6 leq alpha leq 1.2$; $Phi_{0}$ is the flux quantum. For a qubit with an energy level splitting linearly coupled to the applied flux, our calculations of the dependence of the pure dephasing time $tau_phi$ of Ramsey and echo pulse sequences on $alpha$ for fixed $A$ show that $tau_phi$ decreases rapidly as $alpha$ is reduced. We find that $tau_phi$ is relatively insensitive to the noise bandwidth, $f_1 leq f leq f_2$, for all $alpha$ provided the ultraviolet cutoff frequency $f_2 > 1/tau_phi$. We calculate the ratio $tau_{phi,E} / tau_{phi,R}$ of the echo ($E$) and Ramsey ($R$) sequences, and the dependence of the decay function on $alpha$ and $f_2$. We investigate the case in which $S_Phi(f_0)$ is fixed at the ``pivot frequency'' $f_0 neq 1$~Hz while $alpha$ is varied, and find that the choice of $f_0$ can greatly influence the sensitivity of $tau_{phi,E}$ and $tau_{phi,R}$ to the value of $alpha$.Finally, we conclude with a brief review of our principal results and conclusions. We also comment on promising avenues of future research.

•Jan 1, 2013•0 citations

Low frequency (1/f) noise in YBa2Cu3O7−δ grain boundary junction dc superconducting quantum interference devices

J. Chen, T. Ogawa, Hiroyuki Nakamura +3 more

We have studied low frequency (1/f) noise of YBa2Cu3O7−δ dc superconducting quantum interference devices (SQUIDs) on SrTiO3 bicrystal substrates. 1/f flux noise, either measured at different temperatures for optimized bias current or measured at 77 K for different bias currents, is almost constant. These facts imply that 1/f noise mainly comes from fluctuations of the critical current of the Josephson junction that form the SQUID. Also, we explain the critical current fluctuations in the junction by an equilibrium temperature fluctuation model.

Journal of Applied Physics•Aug 1, 1994•13 citations
The subject of electronic noise in high- superconducting Josephson devices and in their applications is considered. Several types of grain boundary junctions, prepared in different ways by four separate international laboratories, are fully characterized in terms of their electrical and noise properties at a range of temperatures, frequencies, magnetic fields and in the presence of microwaves. Similar characterization is carried out for multijunction Josephson flux-flow arrays, and bi-epitaxial SQUIDs. The theory of Likharev and Semenov for thermal noise in low- junctions is adopted as a reference against which excess noise can be identified in high- junctions. It is combined with theoretical models of excess noise based on fluctuations of critical current and resistance to provide accurate fitting of the observed noise curves. It is shown that the normalized levels of critical current and normal resistance fluctuations for all of the junction types examined are remarkably close (typically around and at 100 Hz) and are nearly independent of temperature in the range T = 30 - 80 K. The frequency dependence is close to the universal 1/f law with some deviations due to trapping of charge carriers at discrete states in the tunnelling barrier. Measurements of voltage noise levels and critical current fluctuations in multijunction flux-flow amplifiers, reported for the first time, are consistent with levels in single junctions of the same type. Excess noise is studied as a function of external magnetic field, in a way that has not been previously described. A new interpretation of the magnetic field-dependent noise data indicates that absolute levels of critical current fluctuations are nearly independent of applied magnetic field. This observation does not appear to have been reported elsewhere. It has important implications for the operation of grain boundary Josephson devices in real applications. Voltage noise in the presence of microwave irradiation, at operating points between Shapiro steps, is consistent with a modified form of the Likharev - Semenov equation which takes into account the known level of critical current fluctuations as measured in field-free conditions. The implications of these results for further improvements in device performance are discussed, and directions for further work are suggested.
Wehavefabricated dc superconductingquantuminterferencedevices (SQUIDs) incorpo-rating 45 ± bi-epitaxial grain boundary junction, i.e. YBCO/YSZ and YBCO/YBCO/YSZ, in washer geometry. The1=f noise power of single junction comes fromresistance fluctuation for high current bias andcritical current fluctuation for low current bias. Thenoisespectrum of thedcSQUIDswasmeasuredwithdcandacbiasschemesandshowedvalueof » 1 £ 10 ¡ 5 © 0/Hz1=2 at 100 Hz. The possible noise sources, critical current fluctuations, flux motion noise and resistance fluctuation, are investigated. The results are compared with previous published data. PACS. 85.25.Cp – Josephson devices. PACS. 85.25.Dq – Superconducting quantuminterferencedevices (SQUIDs).
We have fabricated RF and DC SQUIDS with step-edge Josephson junctions (SEJ) and YBa 2 Cu 3 O 7 thin films. The low-frequency noise of these SQUIDS has been investigated as a function of temperature, bias current and magnetic field. Typically, the energy resolution in the white noise region of the DC SQUIDS with an inductance of 45 pH was 3*10 -30 J Hz -1 at 77.5 K. Depending on the bias current, the low-frequency spectrum could be of either 1/f type or Lorentzian type. The Lorentzian spectrum was generated by random telegraph signals (RTSS). An Arrhenius plot was obtained from the temperature dependence of the switching time of these RTSS. We have determined two barrier lengths of 0.23 eV and 1 eV of the two-level fluctuator (TLF) generating this RTS noise. From the magnetic-field dependence of the low-frequency noise we have found that the noise is periodic with the flux corresponding to the area of the SEJ. The results were discussed in terms of a model treating the SEJ as a multi-junction interferometer which forms a two-level fluctuator when the junction is placed inside a SQUID loop. The noise is generated by thermally activated switching of the SQUID between the two different states of the SQUID.
The low-current fluctuations at cryogenic temperatures together with the low dynamical resistance in the resonant states of Josephson tunnel junctions allow for the realization of superconducting oscillators up to the THz range with ultra-low spectral linewidth. By virtue of the Josephson frequency-voltage relationship, we show that the same properties can be exploited for the practical realization of magnetic flux-to-voltage transducers based on the flux–flow in long Josephson tunnel junctions whose intrinsic low-frequency voltage fluctuations at amount to few , that is, too small to be measured by any present semiconductor electronics. Nevertheless, by using a double transformer SQUID amplifier we demonstrate that the (amplitude) voltage spectral density, , of an all-niobium sensor does not exceed the level of and is not affected by excess noise at least down to few hertz. Such ultra-low white noise, corresponding to a magnetic field noise , together with a highly linear and broadband voltage responsivity over a wide magnetic flux range, makes the flux–flow magnetometers potentially competitive with SQUID-based devices.
Following a method proposed by Divin and Modovets [Sov. Tech. Phys. Lett. 9, 108 (1983)], we have measured at millimeter waveband the intrinsic noise temperatures TN of YBa2Cu3O7−δ Josephson junctions or dc superconducting quantum interference devices (SQUIDs) fabricated on SrTiO3, yttria-stabilized ZrO2, or Si bicrystal substrates. Over wide ranges of physical temperatures TP and the junction’s normal resistance RN, it was found that TN follows TP pretty well. This indicates that the intrinsic noise in the devices is dominated by Johnson noise. TN was also measured in cases where there is external magnetic field applied, or where there is another microwave radiation like the local oscillator in a mixer. The magnetic field or microwave radiation does not seem to affect TN in any appreciable way. To estimate the high frequency performance of the junctions on Si bicrystal substrates, direct irradiation by a far infrared laser at 1.81 THz is carried out and the clear first Shapiro step is observed.
For over three decades, the presence of magnetic flux noise with a power spectral density scaling roughly as SPhi(f)propto1/falphaS_Phi(f) propto 1/f^alphaSP​hi(f)propto1/falpha, where alphalesssim1alpha lesssim 1alphalesssim1, has been known to limit the low-frequency performance of dc superconducting quantum interference devices (SQUIDs). In recent years, experiments indicate that this same noise persists to frequencies up to 1~GHz and is a dominant source of dephasing in flux-sensitive superconducting quantum bits (qubits). Thus, the reduction of flux noise presents a major hurdle towards the successful realization of scalable quantum computers that are based on flux-based qubits. In this thesis, we present experimental measurements, theoretical analyses, and numerical simulations that support a more detailed understanding of both the microscopic and macroscopic properties of flux noise.Our experimental work begins with flux noise measurements of a large number of SQUIDs in the temperature range from 0.1~K to 4~K. We report on measurements of ten SQUIDs with systematically varied geometries and show that alphaalphaalpha increases as the temperature is lowered; in so doing, each spectrum pivots about a nearly constant frequency. The mean square flux noise, inferred by integrating the power spectra, grows rapidly with temperature and at a given temperature is approximately independent of the outer dimension of a given SQUID washer. We show that these results are incompatible with a model based on the random reversal of independent, spins that are located at the surface of the SQUID washer.In the course of our flux noise measurements, we became aware of a spurious contribution to low-frequency critical current noise in Josephson junctions---normally attributed to charge trapping in the barrier---arising from temperature instabilities inherent in cryogenic systems. These temperature fluctuations modify the critical current via its temperature dependence. By computing cross-correlations between measured temperature and critical current noise in Al-AlOx-Al junctions, we show that, despite excellent temperature stability, temperature fluctuations induce observable critical current fluctuations. Particularly, because 1/f1/f1/f critical current noise has decreased with improved fabrication techniques in recent years, it is important to understand and eliminate this additional noise source.Next, we introduce a numerical method of calculating the mean square flux noise PhisqPhisqPhisq from independently fluctuating spins on the surface of thin-film loops of arbitrary geometry. By reciprocity, PhisqPhisqPhisq is proportional to langleBbf(rbf)2ranglelangleBbf(rbf)^2ranglelangleBbf(rbf)2rangle, where Bbf(rbf)Bbf(rbf)Bbf(rbf) is the magnetic field generated by a circulating current around the loop and rbfrbfrbf varies over the loop surface. By discretizing the loop nonuniformly, we efficiently and accurately compute the current distribution and resulting magnetic field, which may vary rapidly across the loop. We use this method to compute PhisqPhisqPhisq in a number of scenarios in which we systematically vary physical parameters of the loop. We compare our simulations to an earlier analytic result predicting that PhisqproptoR/WPhisq propto R/WPhisqproptoR/W in the limit where the loop radius RRR is much greater than the linewidth WWW. We further show that the previously neglected contribution of edge spins to PhisqPhisqPhisq is significant---even dominant---in narrow-linewidth loops.To calculate theoretical dephasing rates in qubits, we consider flux noise with a spectral density SPhi(f)=A2/(f/1 hboxHz)alphaS_Phi(f) = A^2/(f/1~hbox{Hz})^alphaSP​hi(f)=A2/(f/1 hboxHz)alpha, where AAA is of the order of 1~muPhi0,hboxHz−1/2muPhi_0 , hbox{Hz}^{-1/2}muPhi0​,hboxHz−1/2 and 0.6leqalphaleq1.20.6 leq alpha leq 1.20.6leqalphaleq1.2; Phi0Phi_{0}Phi0​ is the flux quantum. For a qubit with an energy level splitting linearly coupled to the applied flux, our calculations of the dependence of the pure dephasing time tauphitau_phitaup​hi of Ramsey and echo pulse sequences on alphaalphaalpha for fixed AAA show that tauphitau_phitaup​hi decreases rapidly as alphaalphaalpha is reduced. We find that tauphitau_phitaup​hi is relatively insensitive to the noise bandwidth, f1leqfleqf2f_1 leq f leq f_2f1​leqfleqf2​, for all alphaalphaalpha provided the ultraviolet cutoff frequency f2>1/tauphif_2 > 1/tau_phif2​>1/taup​hi. We calculate the ratio tauphi,E/tauphi,Rtau_{phi,E} / tau_{phi,R}tauphi,E​/tauphi,R​ of the echo (EEE) and Ramsey (RRR) sequences, and the dependence of the decay function on alphaalphaalpha and f2f_2f2​. We investigate the case in which SPhi(f0)S_Phi(f_0)SP​hi(f0​) is fixed at the ``pivot frequency'' f0neq1f_0 neq 1f0​neq1~Hz while alphaalphaalpha is varied, and find that the choice of f0f_0f0​ can greatly influence the sensitivity of tauphi,Etau_{phi,E}tauphi,E​ and tauphi,Rtau_{phi,R}tauphi,R​ to the value of alphaalphaalpha.Finally, we conclude with a brief review of our principal results and conclusions. We also comment on promising avenues of future research.
We have studied low frequency (1/f) noise of YBa2Cu3O7−δ dc superconducting quantum interference devices (SQUIDs) on SrTiO3 bicrystal substrates. 1/f flux noise, either measured at different temperatures for optimized bias current or measured at 77 K for different bias currents, is almost constant. These facts imply that 1/f noise mainly comes from fluctuations of the critical current of the Josephson junction that form the SQUID. Also, we explain the critical current fluctuations in the junction by an equilibrium temperature fluctuation model.