Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Journal of Physics

Flicker (1/f) Noise in 45^± Bi-Epitaxial Grain Boundary Junctions and dc SQUID of YBa2Cu3Oy

Baodian Yao, S.-H. Tsai, C. C., M. K. Wu

Published Apr 1, 2000• 0 citations
OpenAlex

Abstract

Wehavefabricated dc superconductingquantuminterferencedevices (SQUIDs) incorpo-rating 45 ± bi-epitaxial grain boundary junction, i.e. YBCO/YSZ and YBCO/YBCO/YSZ, in washer geometry. The1=f noise power of single junction comes fromresistance fluctuation for high current bias andcritical current fluctuation for low current bias. Thenoisespectrum of thedcSQUIDswasmeasuredwithdcandacbiasschemesandshowedvalueof » 1 £ 10 ¡ 5 © 0/Hz1=2 at 100 Hz. The possible noise sources, critical current fluctuations, flux motion noise and resistance fluctuation, are investigated. The results are compared with previous published data. PACS. 85.25.Cp – Josephson devices. PACS. 85.25.Dq – Superconducting quantuminterferencedevices (SQUIDs).

Related papers

Low frequency (1/f) noise in YBa2Cu3O7−δ grain boundary junction dc superconducting quantum interference devices

J. Chen, T. Ogawa, Hiroyuki Nakamura +3 more

We have studied low frequency (1/f) noise of YBa2Cu3O7−δ dc superconducting quantum interference devices (SQUIDs) on SrTiO3 bicrystal substrates. 1/f flux noise, either measured at different temperatures for optimized bias current or measured at 77 K for different bias currents, is almost constant. These facts imply that 1/f noise mainly comes from fluctuations of the critical current of the Josephson junction that form the SQUID. Also, we explain the critical current fluctuations in the junction by an equilibrium temperature fluctuation model.

Journal of Applied Physics•Aug 1, 1994•13 citations

Origin of 1/f noise in Y1Ba2Cu3O7−x step-edge dc SQUIDs

Dirk Grundler, Rainer Eckart, Bernd R. David +1 more

We have fabricated Y1Ba2Cu3O7−x step-edge junction dc superconducting quantum interference devices (SQUIDs) and characterized their noise performance. The current-voltage characteristics of our SQUIDs are of resistively shunted junction type with critical current densities jc of about 104 A/cm2 and maximum flux to voltage transfer functions δV/δΦ of 20 μV/Φ0 at 77 K. We compare model predictions for 1/f noise in dc SQUIDs with experimental data and show that the frequency dependent noise in our devices results from critical current fluctuations of the Josephson junctions. A bias current reversing technique is effective in suppressing this noise contribution. A flux noise Φn of 80 μΦ0/Hz1/2 at 1 Hz and 77 K was measured on a dc SQUID with an inductance Ls of 60 pH.

Applied Physics Letters•Apr 26, 1993•23 citations

Flicker (1∕f) noise in the critical current of Josephson junctions at 0.09–4.2K

F. C. Wellstood, C. Urbina, John L. Clarke

We have measured the low-frequency noise in the critical current Ic of six dc superconducting quantum interference devices (SQUIDs) with resistively shunted Nb–NbOx–PbIn Josephson junctions in the temperature range T=0.09–4.2K. Each device is voltage biased, the applied flux is an integer number of flux quanta, and the current fluctuations are measured with a second dc SQUID. At low frequencies f, there is a component of the power spectrum of the critical current fluctuations given approximately by SIc(f)=CIc2T2∕Af, where A is the area of both junctions, and C≈(3.9±0.4)×10−23m2∕K2. For quantum bits based on Josephson junctions, the scaling of SIc(f) with T2 implies that the dephasing time limited by critical current l∕f noise should scale as 1∕T for temperatures down to at least 0.09K.

Applied Physics Letters•Nov 29, 2004•62 citations

Submicron YBa2Cu3O7−δ grain boundary junction dc SQUIDs

M. Kawasaki, P. K. Chaudhari, T. H. Newman +1 more

We have fabricated and measured the properties of micron-size single grain boundary junctions and dc superconducting quantum interference devices (SQUIDs). The width of the junctions was varied between 0.25 and 2 μm. The junctions were formed in c-axis oriented epitaxial films with a single 24° tilt boundary. They were fabricated using electron beam lithography and ion milling. All of the junctions operate at 77 K. The noise properties of SQUIDs made of these junctions have been characterized. They show a significant 1/f component which is comparable to published values. However, the white noise level, 3×10−31 J/Hz measured at 77 K, is the lowest ever reported.

Applied Physics Letters•Jun 3, 1991•59 citations

Excess noise in thin film grain boundary Josephson junctions and devices

L Hao, J.C. Macfarlane, Colin M. Pegrum

The subject of electronic noise in high- superconducting Josephson devices and in their applications is considered. Several types of grain boundary junctions, prepared in different ways by four separate international laboratories, are fully characterized in terms of their electrical and noise properties at a range of temperatures, frequencies, magnetic fields and in the presence of microwaves. Similar characterization is carried out for multijunction Josephson flux-flow arrays, and bi-epitaxial SQUIDs. The theory of Likharev and Semenov for thermal noise in low- junctions is adopted as a reference against which excess noise can be identified in high- junctions. It is combined with theoretical models of excess noise based on fluctuations of critical current and resistance to provide accurate fitting of the observed noise curves. It is shown that the normalized levels of critical current and normal resistance fluctuations for all of the junction types examined are remarkably close (typically around and at 100 Hz) and are nearly independent of temperature in the range T = 30 - 80 K. The frequency dependence is close to the universal 1/f law with some deviations due to trapping of charge carriers at discrete states in the tunnelling barrier. Measurements of voltage noise levels and critical current fluctuations in multijunction flux-flow amplifiers, reported for the first time, are consistent with levels in single junctions of the same type. Excess noise is studied as a function of external magnetic field, in a way that has not been previously described. A new interpretation of the magnetic field-dependent noise data indicates that absolute levels of critical current fluctuations are nearly independent of applied magnetic field. This observation does not appear to have been reported elsewhere. It has important implications for the operation of grain boundary Josephson devices in real applications. Voltage noise in the presence of microwave irradiation, at operating points between Shapiro steps, is consistent with a modified form of the Likharev - Semenov equation which takes into account the known level of critical current fluctuations as measured in field-free conditions. The implications of these results for further improvements in device performance are discussed, and directions for further work are suggested.

Superconductor Science and Technology•Aug 1, 1996•34 citations

Low 1/f noise single-layer YBa2Cu3Ox dc SQUID at 77 K

Gergely Friedl, M. Vildić, Bernhard Roas +6 more

Autonomous single-layer dc superconducting quantum interference devices (SQUIDs) have been prepared from epitaxial, laser-deposited YBa2Cu3Ox films on step edge SrTiO3 and LaAlO3 substrates. For device patterning, a SiOx inhibit technique as well as conventional ethylenediaminetetraacetic wet etch was used. The Josephson junctions are of grain boundary type. Their widths are 5 μm. The SQUID hole is a square of about 5 μm; the SQUID inductance is estimated to be about 20 pH. We obtained a very regular, nonhysteretic flux to voltage modulation over more than 100 flux quanta (Φ0). The maximum voltage signal is of the order of 15 μV peak to peak and the maximum transfer function dV/dΦ at the appropriate flux bias is 50 μV/Φ0 at 77 K. The best value of the equivalent flux noise as measured in the flux locked loop mode is 1.4×10−5 Φ0/Hz1/2 at 1 Hz and 1×10−5 Φ0/Hz1/2 in the white noise region for f≳5 Hz. This results in an energy resolution εn,w(f≳5 Hz)=1×10−29 J/Hz in the white noise region and 2×10−29 J/Hz at 1 Hz.

Applied Physics Letters•Jun 15, 1992•69 citations
Wehavefabricated dc superconductingquantuminterferencedevices (SQUIDs) incorpo-rating 45 ± bi-epitaxial grain boundary junction, i.e. YBCO/YSZ and YBCO/YBCO/YSZ, in washer geometry. The1=f noise power of single junction comes fromresistance fluctuation for high current bias andcritical current fluctuation for low current bias. Thenoisespectrum of thedcSQUIDswasmeasuredwithdcandacbiasschemesandshowedvalueof » 1 £ 10 ¡ 5 © 0/Hz1=2 at 100 Hz. The possible noise sources, critical current fluctuations, flux motion noise and resistance fluctuation, are investigated. The results are compared with previous published data. PACS. 85.25.Cp – Josephson devices. PACS. 85.25.Dq – Superconducting quantuminterferencedevices (SQUIDs).
We have studied low frequency (1/f) noise of YBa2Cu3O7−δ dc superconducting quantum interference devices (SQUIDs) on SrTiO3 bicrystal substrates. 1/f flux noise, either measured at different temperatures for optimized bias current or measured at 77 K for different bias currents, is almost constant. These facts imply that 1/f noise mainly comes from fluctuations of the critical current of the Josephson junction that form the SQUID. Also, we explain the critical current fluctuations in the junction by an equilibrium temperature fluctuation model.
We have fabricated Y1Ba2Cu3O7−x step-edge junction dc superconducting quantum interference devices (SQUIDs) and characterized their noise performance. The current-voltage characteristics of our SQUIDs are of resistively shunted junction type with critical current densities jc of about 104 A/cm2 and maximum flux to voltage transfer functions δV/δΦ of 20 μV/Φ0 at 77 K. We compare model predictions for 1/f noise in dc SQUIDs with experimental data and show that the frequency dependent noise in our devices results from critical current fluctuations of the Josephson junctions. A bias current reversing technique is effective in suppressing this noise contribution. A flux noise Φn of 80 μΦ0/Hz1/2 at 1 Hz and 77 K was measured on a dc SQUID with an inductance Ls of 60 pH.
We have measured the low-frequency noise in the critical current Ic of six dc superconducting quantum interference devices (SQUIDs) with resistively shunted Nb–NbOx–PbIn Josephson junctions in the temperature range T=0.09–4.2K. Each device is voltage biased, the applied flux is an integer number of flux quanta, and the current fluctuations are measured with a second dc SQUID. At low frequencies f, there is a component of the power spectrum of the critical current fluctuations given approximately by SIc(f)=CIc2T2∕Af, where A is the area of both junctions, and C≈(3.9±0.4)×10−23m2∕K2. For quantum bits based on Josephson junctions, the scaling of SIc(f) with T2 implies that the dephasing time limited by critical current l∕f noise should scale as 1∕T for temperatures down to at least 0.09K.
We have fabricated and measured the properties of micron-size single grain boundary junctions and dc superconducting quantum interference devices (SQUIDs). The width of the junctions was varied between 0.25 and 2 μm. The junctions were formed in c-axis oriented epitaxial films with a single 24° tilt boundary. They were fabricated using electron beam lithography and ion milling. All of the junctions operate at 77 K. The noise properties of SQUIDs made of these junctions have been characterized. They show a significant 1/f component which is comparable to published values. However, the white noise level, 3×10−31 J/Hz measured at 77 K, is the lowest ever reported.
The subject of electronic noise in high- superconducting Josephson devices and in their applications is considered. Several types of grain boundary junctions, prepared in different ways by four separate international laboratories, are fully characterized in terms of their electrical and noise properties at a range of temperatures, frequencies, magnetic fields and in the presence of microwaves. Similar characterization is carried out for multijunction Josephson flux-flow arrays, and bi-epitaxial SQUIDs. The theory of Likharev and Semenov for thermal noise in low- junctions is adopted as a reference against which excess noise can be identified in high- junctions. It is combined with theoretical models of excess noise based on fluctuations of critical current and resistance to provide accurate fitting of the observed noise curves. It is shown that the normalized levels of critical current and normal resistance fluctuations for all of the junction types examined are remarkably close (typically around and at 100 Hz) and are nearly independent of temperature in the range T = 30 - 80 K. The frequency dependence is close to the universal 1/f law with some deviations due to trapping of charge carriers at discrete states in the tunnelling barrier. Measurements of voltage noise levels and critical current fluctuations in multijunction flux-flow amplifiers, reported for the first time, are consistent with levels in single junctions of the same type. Excess noise is studied as a function of external magnetic field, in a way that has not been previously described. A new interpretation of the magnetic field-dependent noise data indicates that absolute levels of critical current fluctuations are nearly independent of applied magnetic field. This observation does not appear to have been reported elsewhere. It has important implications for the operation of grain boundary Josephson devices in real applications. Voltage noise in the presence of microwave irradiation, at operating points between Shapiro steps, is consistent with a modified form of the Likharev - Semenov equation which takes into account the known level of critical current fluctuations as measured in field-free conditions. The implications of these results for further improvements in device performance are discussed, and directions for further work are suggested.
Autonomous single-layer dc superconducting quantum interference devices (SQUIDs) have been prepared from epitaxial, laser-deposited YBa2Cu3Ox films on step edge SrTiO3 and LaAlO3 substrates. For device patterning, a SiOx inhibit technique as well as conventional ethylenediaminetetraacetic wet etch was used. The Josephson junctions are of grain boundary type. Their widths are 5 μm. The SQUID hole is a square of about 5 μm; the SQUID inductance is estimated to be about 20 pH. We obtained a very regular, nonhysteretic flux to voltage modulation over more than 100 flux quanta (Φ0). The maximum voltage signal is of the order of 15 μV peak to peak and the maximum transfer function dV/dΦ at the appropriate flux bias is 50 μV/Φ0 at 77 K. The best value of the equivalent flux noise as measured in the flux locked loop mode is 1.4×10−5 Φ0/Hz1/2 at 1 Hz and 1×10−5 Φ0/Hz1/2 in the white noise region for f≳5 Hz. This results in an energy resolution εn,w(f≳5 Hz)=1×10−29 J/Hz in the white noise region and 2×10−29 J/Hz at 1 Hz.