Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optical Fiber Communication Conference

Single-Photon Avalanche Detectors for Quantum Communications

S. Cova, Massimo Ghioni, Franco Zappa, Alberto Tosi, Ivan Rech, Angelo Gulinatti, Simone Tisa

Published Jan 1, 2010• 9 citations
Publisher

Abstract

QKD systems widely employ Single-Photon Avalanche Diodes (SPAD) and set strong demand for improved features and performance. The present state of this detector technology is outlined and the main issues and prospect are discussed for Si-SPADs, suitable for free-space communications, and for InGaAs based SPADs intended for optical fiber communication systems.

DOI
10.1364/ofc.2010.otuc2

Related papers

Single-photon detectors for practical quantum cryptography

Alberto Tosi, Franco Zappa, S. Cova

The implementation and commercialization of quantum cryptography technologies have to face some challenges related to the development of single-photon detectors operating at 1550 nm. The main requirements are: i) high detection efficiency; ii) low noise; iii) high count rate; iv) low timing jitter. Different technologies are currently available for single-photon detection at 1550 nm, but semiconductor devices (like Single-Photon Avalanche Diode, SPAD) offer a photon detection efficiency that is inherently higher than any photocathode employed in vacuum tube detectors. Additionally InGaAs/InP SPADs can detect single photons at 1550 nm with low noise when moderately cooled by means of thermo-electric coolers. Consequently, InGaAs/InP SPAD can be the enabling technology of practical quantum key distribution (QKD) systems, provided that the maximum count rate is increased above 1 Mcps. The main limit is the afterpulsing effect that usually sets too long (< 10 μs) a hold-off time after each avalanche ignition. We present the developments achieved in InGaAs/InP SPAD device design, fabrication technology and front-end electronics, aimed at decreasing the afterpulsing effect, while not impairing photon detection efficiency and timing jitter. The new InGaAs/InP SPADs provide count rates higher than 1 Mcps and temporal response with 60 ps Full-Width at Half Maximum and very short (30 ps time constant) tail. The front-end electronics includes a wide-band pulse generator able to gate the SPAD up to 133 MHz repetition rate. Eventually, a fast avalanche-quenching scheme minimizes quenching time to less than 1 ns, thus effectively reducing afterpulsing by decreasing the total charge flowing through the junction.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 19, 2012•15 citations

Single-photon avalanche diode detectors for quantum key distribution

Gerald S. Buller, Ryan E. Warburton, Saverio Pellegrini +5 more

The application of quantum key distribution (QKD) has raised particular demands for single-photon detectors. One of the most promising candidates at the low-loss optical fibre communications windows is the planar geometry InGaAs/InP single-photon avalanche diode. These detectors have been modelled, fabricated and characterised at 1.55 µm wavelength. Their performance in terms of single-photon detection efficiency, dark count rate, timing jitter and afterpulsing behaviour are reported and compared with the best commercially available, linear multiplication avalanche photodiodes operated in Geiger-mode. Their use in the application of QKD is discussed.

IET Optoelectronics•Dec 10, 2007•16 citations

SPAD electronics for high-speed quantum communications

Joshua C. Bienfang, Alessandro Restelli, Alan L. Migdall

We discuss high-speed electronics that support the use of single-photon avalanche diodes (SPADs) in gigahertz singlephoton communications systems. For InGaAs/InP SPADs, recent work has demonstrated reduced afterpulsing and count rates approaching 500 MHz can be achieved with gigahertz periodic-gating techniques designed to minimize the total avalanche charge to less than 100 fC. We investigate afterpulsing in this regime and establish a connection to observations using more conventional techniques. For Si SPADs, we report the benefits of improved timing electronics that enhance the temporal resolution of Si SPADs used in a free-space quantum key distribution (QKD) system operating in the GHz regime. We establish that the effects of count-rate fluctuations induced by daytime turbulent scintillation are significantly reduced, benefitting the performance of the QKD system.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Dec 7, 2010•4 citations

Recent Advances and Future Perspectives of Single‐Photon Avalanche Diodes for Quantum Photonics Applications

Francesco Ceccarelli, Giulia Acconcia, Angelo Gulinatti +3 more

Abstract Photonic quantum technologies promise a revolution of the world of information processing, from simulation and computing to communication and sensing, thanks to the many advantages of exploiting single photons as quantum information carriers. In this scenario, single‐photon detectors play a key role. On the one hand, superconducting nanowire single‐photon detectors (SNSPDs) are able to provide remarkable performance on a broad spectral range, but their applicability is often limited by the need of cryogenic operating temperatures. On the other hand, single‐photon avalanche diodes (SPADs) overcome the intrinsic limitations of SNSPDs by providing a valid alternative at room temperature or slightly below. In this paper, the authors review the fundamental principles of the SPAD operation and provide a thorough discussion of the recent progress made in this field, comparing the performance of these devices with the requirements of the quantum photonics applications. In the end, the authors conclude with their vision of the future by summarizing prospects and unbeaten paths that can open new perspectives in the field of photonic quantum information processing.

arXiv:2010.05613•Advanced Quantum Technologies•Dec 22, 2020•180 citations

High-performance single-photon detectors and applications in quantum communication

Boris A. Korzh

Two approaches to single-photon detection at telecom wavelengths have been investigated, using semiconductor and superconductor technologies. The low temperature operation of free-running InGaAs/InP negative feedback avalanche diodes (NFADs) was studied, demonstrating that they can operate with an extremely low dark count rate, which opens up a host of new applications. Secondly, superconducting nanowire single-photon detectors (SNSPDs) based on amorphous materials were developed, fabricated and characterized. These detectors are highly attractive because they can achieve excellent attributes simultaneously, such as high efficiency, low noise, good temporal resolution, no afterpulsing and high count rates. Finally, it was demonstrated that the use of NFADs can enable record distance quantum key distribution (QKD) over 307 km of optical fiber. A next generation QKD system has been proposed and numerically analyzed, aiming at extending the record distance by an additional 100 km and increasing the state-of-the-art secret key rate by over an order of magnitude.

•Jan 1, 2016•0 citations

Assembly and characterization of single-photon detectors for quantum networks

Enric Solé Aznar

The use of quantum technologies has risen drastically in the last decades, offering an enhancement in terms of the technological capabilities available nowadays. Found in this field of research, quantum communications based on the transmission of single photons offer new approaches to redefine the use of protocols and devices for specialised applications. As a final result, this leads to the accomplishment of long-range quantum networks with terrestrial and satellite-based communications set to establish a new scale of Telecommunication applications. Within these kinds of applications, this project focuses on the assembly of a single-photon detector using a photodiode of type Single-Photon Avalanche Diode (SPAD), essential device to define the level of performance of any quantum communication system. To carry this out, the system is assembled around its centre piece, an Excelitas APD operated in Geiger mode above its breakdown voltage. The electronic circuit that drives the photodiode is characterised to work with its adjusted bias voltage, its dedicated temperature management system and its active quenching circuit to detect pulses with certainty and precision. The final version of the project is adjusted to work in the 1300nm and 1500nm operating wavelengths as the photodiode used is formed by an InGaAs/InP semiconductor structure. Working on top of the original circuit provided initially, the experimental measurements obtained in the course of the project prove that the design modifications implemented have improved the functioning of the whole system. The main achievements accomplished encompass the generation of pulses for photon detection at 20kHz, the reduction of electromagnetic interferences by a factor 40, the enhancement of the manipulated signals in the circuit by a factor of tens, and the correct management of the SPAD temperature to maintain a fixed value of dark counts for a long time.

•Jul 1, 2026•0 citations
QKD systems widely employ Single-Photon Avalanche Diodes (SPAD) and set strong demand for improved features and performance. The present state of this detector technology is outlined and the main issues and prospect are discussed for Si-SPADs, suitable for free-space communications, and for InGaAs based SPADs intended for optical fiber communication systems.
The implementation and commercialization of quantum cryptography technologies have to face some challenges related to the development of single-photon detectors operating at 1550 nm. The main requirements are: i) high detection efficiency; ii) low noise; iii) high count rate; iv) low timing jitter. Different technologies are currently available for single-photon detection at 1550 nm, but semiconductor devices (like Single-Photon Avalanche Diode, SPAD) offer a photon detection efficiency that is inherently higher than any photocathode employed in vacuum tube detectors. Additionally InGaAs/InP SPADs can detect single photons at 1550 nm with low noise when moderately cooled by means of thermo-electric coolers. Consequently, InGaAs/InP SPAD can be the enabling technology of practical quantum key distribution (QKD) systems, provided that the maximum count rate is increased above 1 Mcps. The main limit is the afterpulsing effect that usually sets too long (< 10 μs) a hold-off time after each avalanche ignition. We present the developments achieved in InGaAs/InP SPAD device design, fabrication technology and front-end electronics, aimed at decreasing the afterpulsing effect, while not impairing photon detection efficiency and timing jitter. The new InGaAs/InP SPADs provide count rates higher than 1 Mcps and temporal response with 60 ps Full-Width at Half Maximum and very short (30 ps time constant) tail. The front-end electronics includes a wide-band pulse generator able to gate the SPAD up to 133 MHz repetition rate. Eventually, a fast avalanche-quenching scheme minimizes quenching time to less than 1 ns, thus effectively reducing afterpulsing by decreasing the total charge flowing through the junction.
The application of quantum key distribution (QKD) has raised particular demands for single-photon detectors. One of the most promising candidates at the low-loss optical fibre communications windows is the planar geometry InGaAs/InP single-photon avalanche diode. These detectors have been modelled, fabricated and characterised at 1.55 µm wavelength. Their performance in terms of single-photon detection efficiency, dark count rate, timing jitter and afterpulsing behaviour are reported and compared with the best commercially available, linear multiplication avalanche photodiodes operated in Geiger-mode. Their use in the application of QKD is discussed.
We discuss high-speed electronics that support the use of single-photon avalanche diodes (SPADs) in gigahertz singlephoton communications systems. For InGaAs/InP SPADs, recent work has demonstrated reduced afterpulsing and count rates approaching 500 MHz can be achieved with gigahertz periodic-gating techniques designed to minimize the total avalanche charge to less than 100 fC. We investigate afterpulsing in this regime and establish a connection to observations using more conventional techniques. For Si SPADs, we report the benefits of improved timing electronics that enhance the temporal resolution of Si SPADs used in a free-space quantum key distribution (QKD) system operating in the GHz regime. We establish that the effects of count-rate fluctuations induced by daytime turbulent scintillation are significantly reduced, benefitting the performance of the QKD system.
Abstract Photonic quantum technologies promise a revolution of the world of information processing, from simulation and computing to communication and sensing, thanks to the many advantages of exploiting single photons as quantum information carriers. In this scenario, single‐photon detectors play a key role. On the one hand, superconducting nanowire single‐photon detectors (SNSPDs) are able to provide remarkable performance on a broad spectral range, but their applicability is often limited by the need of cryogenic operating temperatures. On the other hand, single‐photon avalanche diodes (SPADs) overcome the intrinsic limitations of SNSPDs by providing a valid alternative at room temperature or slightly below. In this paper, the authors review the fundamental principles of the SPAD operation and provide a thorough discussion of the recent progress made in this field, comparing the performance of these devices with the requirements of the quantum photonics applications. In the end, the authors conclude with their vision of the future by summarizing prospects and unbeaten paths that can open new perspectives in the field of photonic quantum information processing.
Two approaches to single-photon detection at telecom wavelengths have been investigated, using semiconductor and superconductor technologies. The low temperature operation of free-running InGaAs/InP negative feedback avalanche diodes (NFADs) was studied, demonstrating that they can operate with an extremely low dark count rate, which opens up a host of new applications. Secondly, superconducting nanowire single-photon detectors (SNSPDs) based on amorphous materials were developed, fabricated and characterized. These detectors are highly attractive because they can achieve excellent attributes simultaneously, such as high efficiency, low noise, good temporal resolution, no afterpulsing and high count rates. Finally, it was demonstrated that the use of NFADs can enable record distance quantum key distribution (QKD) over 307 km of optical fiber. A next generation QKD system has been proposed and numerically analyzed, aiming at extending the record distance by an additional 100 km and increasing the state-of-the-art secret key rate by over an order of magnitude.
The use of quantum technologies has risen drastically in the last decades, offering an enhancement in terms of the technological capabilities available nowadays. Found in this field of research, quantum communications based on the transmission of single photons offer new approaches to redefine the use of protocols and devices for specialised applications. As a final result, this leads to the accomplishment of long-range quantum networks with terrestrial and satellite-based communications set to establish a new scale of Telecommunication applications. Within these kinds of applications, this project focuses on the assembly of a single-photon detector using a photodiode of type Single-Photon Avalanche Diode (SPAD), essential device to define the level of performance of any quantum communication system. To carry this out, the system is assembled around its centre piece, an Excelitas APD operated in Geiger mode above its breakdown voltage. The electronic circuit that drives the photodiode is characterised to work with its adjusted bias voltage, its dedicated temperature management system and its active quenching circuit to detect pulses with certainty and precision. The final version of the project is adjusted to work in the 1300nm and 1500nm operating wavelengths as the photodiode used is formed by an InGaAs/InP semiconductor structure. Working on top of the original circuit provided initially, the experimental measurements obtained in the course of the project prove that the design modifications implemented have improved the functioning of the whole system. The main achievements accomplished encompass the generation of pulses for photon detection at 20kHz, the reduction of electromagnetic interferences by a factor 40, the enhancement of the manipulated signals in the circuit by a factor of tens, and the correct management of the SPAD temperature to maintain a fixed value of dark counts for a long time.