Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Measuring excited state lifetime of Rb atoms with pump-probe technique

Xi Zeng, D. L. Boïko

Published Aug 31, 2015• 1 citation
Publisher

Abstract

A technique for measuring the excited state lifetime τex of optical transitions in alkali atoms is presented. It is a form of pump-probe technique based on time-resolved optical transmission through the atomic vapor cell. This technique can serve as an alternative to the traditionally used time-resolved photofluorescence methods when measuring alkali vapor cells with heavily quenched fluorescence, where the τex is expected to be on the order of a few nanoseconds, and the highly sensitive fluorescence detectors with sub-nanosecond temporal resolution that are required may not be available. We use this technique to measure the τex of Rb atoms in vapor cells with different buffer gas pressures.

DOI
10.1063/1.4929918

Related papers

Lifetime measurements in the excited S states of K, Rb, and Cs by the cascade Hanle effect*

Basim R. Bulos, R. Gupta, W. Happer

The cascade Hanle-effect technique has been described in detail. It has been used to measure the radiative lifetimes of several excited S states in heavy alkali metal atoms. We obtained the following measurements (in nanoseconds): τ(K, 6 2S1/2) = 68 ± 9, τ(Rb, 7 2S1/2) = 91 ± 11, τ(Cs, 8 2S1/2) = 96 ± 14, and τ(Cs, 9 2S1/2) = 231 ± 35.

Journal of the Optical Society of America•May 1, 1976•35 citations

Transverse measurements of polarization in optically pumped Rb vapor cells

Joan Dreiling, Eric B. Norrgard, D. Tupa +1 more

We have developed a simple heuristic method for determining the polarization of an optically pumped alkali-metal vapor. A linearly polarized probe beam traverses a vapor cell perpendicular to the pump-beam propagation direction, and the transmitted beam intensity is monitored for orthogonal linear polarizations. As the probe beam is scanned in frequency across the ${D}_{1}$ transition, its linear-polarization-dependent transmission can be used as a measure of the atomic orientation of the vapor. We analyze these transmission differences and their dependence on the alkali-metal number density in the vapor.

Physical Review A•Nov 26, 2012•6 citations

An Interferometric Technique Of Density Measurement Applied To Alkali-metal Vapors Oriented By Optical Pumping.

Steven Jarrett

III-8.Comparison of optical pumping signals for two spherical cells with different buffer gas pressures as a function of density times diameter of cell for equal D2/D1.60 IV-1.Energy level diagram showing hyperfine structure of Rb Di line.Units are 10*3 cm-1.67 IV-2.Equivalent circuit for rate equations involving ex change polarization.73 IV-3.Diagram of optical system for optical pumping of Rb. 83 IV-4.Block diagram of Rb optical pumping signal detection system.85 IV-5.Block diagram of Rb light detection system.90 IV-6.Typical photograph from which relaxation time measure ments are made..Time increases from left to right.Scale is 1 millisecond per division.92 IV-7.Lines determined from measurements on time dependence of Rb87 signals at 50°C for the two different light in tensities.Scatter of points is too small to be notice able on graph.93 A-1.Spectral profile of D1 radiation from a Varian spectral lamp containing natural Rb.Ill A-2.Spectral profile of Di radiation from a Varian spectral lamp containing Rb87.112 A-3-Spectral profile of Di radiation from a Varian spectral lamp containing Rb87 after filtering by an Rb85 absorption cell.113 vi CHAPTER I2 atomic ground states and the parameters of various relaxation processes of gaseous systems.These investigations led to the development of mag netometers of unique sensitivity.More recently, very precise frequency standards have been developed using the methods of optical pumping and the knowledge gained through their application.The present work was undertaken in the context of extending our knowledge of the dynamics of optical pumping methods and of exploiting these methods for the deter mination of an interesting atomic exchange cross section.Optical pumping may be considered as a specialized technique used in conjunction with magnetic resonance phenomena.All magnetic reso nance techniques depend upon obtaining an oriented (polarized) macro scopic sample of matter, that is, matter with a net magnetic moment.In the atomic beam magnetic resonance method, this is accomplished by sort ing out, spatially, atoms whose magnetic moments have a particular ori entation with respect to a magnetic field.In nuclear or electron para magnetic resonance work in solids, liquids, or gases, the small thermal equilibrium polarization that matter possesses in a magnetic field is exploited.Optical pumping enhances this equilibrium polarization through selective optical absorption, by a gaseous atomic system, of polarized resonance radiation.Optical pumping offers the great advan tage of experimental simplicity, as compared to other magnetic resonance techniques, but suffers from severe limitations in application.Since the original suggestion by Brossel and Nastier^ and subse quent development by many others, optical pumping, in conjunction with the transmission monitoring technique of signal detection, has became a standard technique in the study of alkali metal ground states.By far the greatest amount of work in optical pumping has been concerned with alkali metal vapors.Bell, Bloom/ and others^ have considered the process of the optical pumping of the alkalis with attention to the spec tral composition of the pumping light, that is, the resonance radiation incident on the alkali vapor.Colegrove and Franken? have recently dis cussed the complication in the analyses of optical pumping signals for Q helium when the helium absorption cell is optically thick.Hobart has considered this same complication for sodium.Prediction of signals must take into account the fact that the pumping light is absorbed ap proximately exponentially in the optical pumping absorption cell.This means that the absorption coefficient, which is proportional to the al kali density, times the length of the cell is a significant parameter in determining the strength of the signal.Similar calculations of the dependence of optical pumping signals on alkali density and spectral com position of the pumping light will be presented in this work.In order to test the signal predictions> a high resolution Fabry-Perot spectrometer was constructed.This instrument can be used for two purposes : the investigation of the intensity distribution of the pumping light, and, more importantly, determinations of the alkali vapor density in the absorption cell.The desired data are curves of optical pumping signals, for a typical sodium optical pumping experiment, as a function of density.It is often necessary to know these densities in order to is limited to the accuracy to which the density is known.Since the Fabry-Perot spectrometer used to measure sodium vapor densities in conjunction with the signal strength versus density meas urements can be applied to different systems, it was decided to make a determination of the rubidium 85-rubidium 87 spin exchange cross sec tion.The reasons for this choice are discussed in detail in Chapt.IV.In brief, work on rubidium exchange offered some experimental sim plifications and rubidium has previously been studied more thoroughly than other systems.

•Jan 1, 1963•0 citations

Collisional Energy Transfer for Rb_2 in Excited State by Rb Atoms

Yifan Shen

At different Rb densities,Rb vapor was irradiated in a glass fluorescence cell with pulses of radiation from a pumped-laser,populating Rb 2 (B 1 Π u)state by single-photon absorption.Energy transfer in Rb 2 (B 1 Π u) + Rb(5S) collision is studied using methods of atomic and molecular fluorescence.The decay signal of time-resolved fluorescence from B 1 Π u → X 1 Σ + g transition was monitored.The effective lifetimes of the B 1 Π u state can be resolved.The plot of reciprocal of effective lifetimes of the B 1 Π u state against Rb densities yielded the slope that indicated the total cross section for deactivation and the intercept that provided the radiative lifetime of the state.The radiative lifetime 23.5ns for the B 1 Π u is obtained.The cross section for deactivation of the Rb 2 (B 1 Π u) molecules by collisions with Rb atoms is σ 3=(4.33 ± 0.14) × 10-15 cm 2.At the different Rb densities,the time-integrated intensities of the resulting Rb emission lines.I(5P 3/2 → 5S 1/2) and I(5P 1/2 → 5S 1/2) were measured.The absolute values for Rb 2 (B 1 Π u)+Rb→ Rb 2 (1 1 Σ + g) + Rb(5P J)collisional transfer cross sections have been obtained.The cross sections are σ 31=(2.86 ± 0.13) × 10-16 cm 2 (for transferring to 5P 1/2) and σ 32=(8.30 ± 0.38) × 10-16 cm 2 (for transferring to 5P 3/2),respectively.

Shinjang dashösi ilmiy jurnili•Jan 1, 2010•0 citations

Effects of size and dimension in optic relaxation in Rb vapor

Sergey Nikitich Atutov, V. A. Sorokin

Abstract We report on an experiment in which the fluorescence decay time of 5P levels of Rb atoms in a coated vapor cell exceeds several of milliseconds that many orders of magnitude longer than normal decay time of excited of rubidium atoms. This effect has been observed by using the pump laser with fixing frequency and the periodically scan the probing laser frequency of which overlap all Rb hyperfine linens of 5P-5S transition. Long time fluorescence decay take place in wide part of the spherical high quality coated cell. In cylindrical part of the cell or in uncoated cell the long time fluorescence decay was disappeared.

Journal of Physics Conference Series•Nov 1, 2021•0 citations

Optical pumping of alkali-metal vapor in the quasi-high-pressure regime

Kezheng Yan, Jinbo Hu, Nan Zhao

Optical pumping is fundamental to high-precision measurement using thermal alkali-metal atoms in vapor cells. In applications such as atomic magnetometry, buffer gases (e.g., $\mathrm{N}_2$ or $\mathrm{He}$) at specific pressures are introduced to quench fluorescence and mitigate wall relaxation. In the high-pressure limit (e.g., the $\mathrm{N}_2$ pressure $p_{\mathrm{N}_2}> 1$~atm), where collisional broadening exceeds hyperfine splittings of the atoms, optical pumping theory provides a clear description of the angular momentum exchange between photons and atomic spins. However, in many magnetic sensing scenarios, the high-pressure approximation becomes inadequate as its pressure conditions are not strictly satisfied. Consequently, an explicit description of optical pumping under realistic pressures is critical for selecting operating points and enhancing system performance. To address this, we develop a unified theoretical framework of optical pumping in the quasi-high-pressure regime, where collisional broadening is comparable to the ground-state hyperfine splitting. We demonstrate that light absorption, spin polarization, and magnetic-resonance linewidth in this regime differ significantly from those predicted by the high-pressure limit and offer favorable operating conditions. Our study extends conventional modeling and offers critical guidance for atomic magnetometry operating under realistic buffer gas pressures.

physics.atom-phCross-listedarXiv:2603.05859•Physical Review A•Mar 9, 2026•1 citation
A technique for measuring the excited state lifetime τex of optical transitions in alkali atoms is presented. It is a form of pump-probe technique based on time-resolved optical transmission through the atomic vapor cell. This technique can serve as an alternative to the traditionally used time-resolved photofluorescence methods when measuring alkali vapor cells with heavily quenched fluorescence, where the τex is expected to be on the order of a few nanoseconds, and the highly sensitive fluorescence detectors with sub-nanosecond temporal resolution that are required may not be available. We use this technique to measure the τex of Rb atoms in vapor cells with different buffer gas pressures.
We have developed a simple heuristic method for determining the polarization of an optically pumped alkali-metal vapor. A linearly polarized probe beam traverses a vapor cell perpendicular to the pump-beam propagation direction, and the transmitted beam intensity is monitored for orthogonal linear polarizations. As the probe beam is scanned in frequency across the D1{D}_{1}D1​ transition, its linear-polarization-dependent transmission can be used as a measure of the atomic orientation of the vapor. We analyze these transmission differences and their dependence on the alkali-metal number density in the vapor.
III-8.Comparison of optical pumping signals for two spherical cells with different buffer gas pressures as a function of density times diameter of cell for equal D2/D1.60 IV-1.Energy level diagram showing hyperfine structure of Rb Di line.Units are 10*3 cm-1.67 IV-2.Equivalent circuit for rate equations involving ex change polarization.73 IV-3.Diagram of optical system for optical pumping of Rb. 83 IV-4.Block diagram of Rb optical pumping signal detection system.85 IV-5.Block diagram of Rb light detection system.90 IV-6.Typical photograph from which relaxation time measure ments are made..Time increases from left to right.Scale is 1 millisecond per division.92 IV-7.Lines determined from measurements on time dependence of Rb87 signals at 50°C for the two different light in tensities.Scatter of points is too small to be notice able on graph.93 A-1.Spectral profile of D1 radiation from a Varian spectral lamp containing natural Rb.Ill A-2.Spectral profile of Di radiation from a Varian spectral lamp containing Rb87.112 A-3-Spectral profile of Di radiation from a Varian spectral lamp containing Rb87 after filtering by an Rb85 absorption cell.113 vi CHAPTER I2 atomic ground states and the parameters of various relaxation processes of gaseous systems.These investigations led to the development of mag netometers of unique sensitivity.More recently, very precise frequency standards have been developed using the methods of optical pumping and the knowledge gained through their application.The present work was undertaken in the context of extending our knowledge of the dynamics of optical pumping methods and of exploiting these methods for the deter mination of an interesting atomic exchange cross section.Optical pumping may be considered as a specialized technique used in conjunction with magnetic resonance phenomena.All magnetic reso nance techniques depend upon obtaining an oriented (polarized) macro scopic sample of matter, that is, matter with a net magnetic moment.In the atomic beam magnetic resonance method, this is accomplished by sort ing out, spatially, atoms whose magnetic moments have a particular ori entation with respect to a magnetic field.In nuclear or electron para magnetic resonance work in solids, liquids, or gases, the small thermal equilibrium polarization that matter possesses in a magnetic field is exploited.Optical pumping enhances this equilibrium polarization through selective optical absorption, by a gaseous atomic system, of polarized resonance radiation.Optical pumping offers the great advan tage of experimental simplicity, as compared to other magnetic resonance techniques, but suffers from severe limitations in application.Since the original suggestion by Brossel and Nastier^ and subse quent development by many others, optical pumping, in conjunction with the transmission monitoring technique of signal detection, has became a standard technique in the study of alkali metal ground states.By far the greatest amount of work in optical pumping has been concerned with alkali metal vapors.Bell, Bloom/ and others^ have considered the process of the optical pumping of the alkalis with attention to the spec tral composition of the pumping light, that is, the resonance radiation incident on the alkali vapor.Colegrove and Franken? have recently dis cussed the complication in the analyses of optical pumping signals for Q helium when the helium absorption cell is optically thick.Hobart has considered this same complication for sodium.Prediction of signals must take into account the fact that the pumping light is absorbed ap proximately exponentially in the optical pumping absorption cell.This means that the absorption coefficient, which is proportional to the al kali density, times the length of the cell is a significant parameter in determining the strength of the signal.Similar calculations of the dependence of optical pumping signals on alkali density and spectral com position of the pumping light will be presented in this work.In order to test the signal predictions> a high resolution Fabry-Perot spectrometer was constructed.This instrument can be used for two purposes : the investigation of the intensity distribution of the pumping light, and, more importantly, determinations of the alkali vapor density in the absorption cell.The desired data are curves of optical pumping signals, for a typical sodium optical pumping experiment, as a function of density.It is often necessary to know these densities in order to is limited to the accuracy to which the density is known.Since the Fabry-Perot spectrometer used to measure sodium vapor densities in conjunction with the signal strength versus density meas urements can be applied to different systems, it was decided to make a determination of the rubidium 85-rubidium 87 spin exchange cross sec tion.The reasons for this choice are discussed in detail in Chapt.IV.In brief, work on rubidium exchange offered some experimental sim plifications and rubidium has previously been studied more thoroughly than other systems.
At different Rb densities,Rb vapor was irradiated in a glass fluorescence cell with pulses of radiation from a pumped-laser,populating Rb 2 (B 1 Π u)state by single-photon absorption.Energy transfer in Rb 2 (B 1 Π u) + Rb(5S) collision is studied using methods of atomic and molecular fluorescence.The decay signal of time-resolved fluorescence from B 1 Π u → X 1 Σ + g transition was monitored.The effective lifetimes of the B 1 Π u state can be resolved.The plot of reciprocal of effective lifetimes of the B 1 Π u state against Rb densities yielded the slope that indicated the total cross section for deactivation and the intercept that provided the radiative lifetime of the state.The radiative lifetime 23.5ns for the B 1 Π u is obtained.The cross section for deactivation of the Rb 2 (B 1 Π u) molecules by collisions with Rb atoms is σ 3=(4.33 ± 0.14) × 10-15 cm 2.At the different Rb densities,the time-integrated intensities of the resulting Rb emission lines.I(5P 3/2 → 5S 1/2) and I(5P 1/2 → 5S 1/2) were measured.The absolute values for Rb 2 (B 1 Π u)+Rb→ Rb 2 (1 1 Σ + g) + Rb(5P J)collisional transfer cross sections have been obtained.The cross sections are σ 31=(2.86 ± 0.13) × 10-16 cm 2 (for transferring to 5P 1/2) and σ 32=(8.30 ± 0.38) × 10-16 cm 2 (for transferring to 5P 3/2),respectively.
Abstract We report on an experiment in which the fluorescence decay time of 5P levels of Rb atoms in a coated vapor cell exceeds several of milliseconds that many orders of magnitude longer than normal decay time of excited of rubidium atoms. This effect has been observed by using the pump laser with fixing frequency and the periodically scan the probing laser frequency of which overlap all Rb hyperfine linens of 5P-5S transition. Long time fluorescence decay take place in wide part of the spherical high quality coated cell. In cylindrical part of the cell or in uncoated cell the long time fluorescence decay was disappeared.
Optical pumping is fundamental to high-precision measurement using thermal alkali-metal atoms in vapor cells. In applications such as atomic magnetometry, buffer gases (e.g., N2\mathrm{N}_2N2​ or He\mathrm{He}He) at specific pressures are introduced to quench fluorescence and mitigate wall relaxation. In the high-pressure limit (e.g., the N2\mathrm{N}_2N2​ pressure pN2>1p_{\mathrm{N}_2}> 1pN2​​>1~atm), where collisional broadening exceeds hyperfine splittings of the atoms, optical pumping theory provides a clear description of the angular momentum exchange between photons and atomic spins. However, in many magnetic sensing scenarios, the high-pressure approximation becomes inadequate as its pressure conditions are not strictly satisfied. Consequently, an explicit description of optical pumping under realistic pressures is critical for selecting operating points and enhancing system performance. To address this, we develop a unified theoretical framework of optical pumping in the quasi-high-pressure regime, where collisional broadening is comparable to the ground-state hyperfine splitting. We demonstrate that light absorption, spin polarization, and magnetic-resonance linewidth in this regime differ significantly from those predicted by the high-pressure limit and offer favorable operating conditions. Our study extends conventional modeling and offers critical guidance for atomic magnetometry operating under realistic buffer gas pressures.