Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proposal for a stationary micro-SQUID

Jorge Berger

Published Aug 21, 2015• 0 citations
OpenAlex

Abstract

We study a superconducting loop that encloses a magnetic flux, connected to a superconducting and to a normal electrode, when a fixed electric current between the electrodes flows through the loop. The considered circuit does not contain Josephson junctions. We find that in a very broad range of parameters the current flow converges to a stationary regime. The potential difference between the electrodes depends on the magnetic flux, so that measuring this voltage would provide information on the enclosed flux. The sizes of the voltage and of the power dissipation could be appropriate for the design of a practical fluxmeter. We found narrow ranges of flux at which the voltage varies sharply with the flux.

Related papers

Feasibility of a stationary micro-SQUID

Jorge Berger

The standard operation of a dc SQUID leads to oscillatory electric fields that emit electromagnetic radiation and can change the state of the measured sample. A stationary SQUID could be advantageous when back action on the measured sample has to be avoided. We study a superconducting loop that encloses a magnetic flux, connected to a superconducting and to a normal electrode, when a fixed electric current between the electrodes flows through the loop. The considered circuit does not contain Josephson junctions. We find that in a very broad range of parameters the current flow converges to a stationary regime. The potential difference between the electrodes depends on the magnetic flux, so that measuring this voltage would provide information on the enclosed flux. The influence of thermal noise was estimated. The sizes of the voltage and of the power dissipation could be appropriate for the design of a practical fluxmeter. We found narrow ranges of flux at which the voltage varies sharply with the flux.

•Aug 21, 2015•0 citations

Stationary nano-SQUID: theoretical investigation and feasibility analysis

Jorge Berger

The standard operation of a dc SQUID leads to oscillatory electric fields that emit electromagnetic radiation. We estimate the effect that this radiation could have on the measured sample. A stationary SQUID could be advantageous if the oscillation contribution to back action on the measured sample has to be avoided. We study a superconducting loop that encloses a magnetic flux, connected to a superconducting and to a normal electrode, when a fixed electric current between the electrodes flows across the loop. The considered circuit does not contain Josephson junctions. We find that in a very broad range of parameters the current flow converges to a stationary regime, i.e. the densities of normal current and of supercurrent become functions of position only, independent of time. The potential difference between the electrodes depends on the magnetic flux, so that measuring this voltage would provide information on the enclosed flux. The influence of thermal noise was estimated. The sizes of the voltage and of the power dissipation could be appropriate for the design of a practical fluxmeter. We found narrow ranges of flux at which the voltage varies sharply with the flux.

Journal of Physics Condensed Matter•May 30, 2017•2 citations

Temperature-Biased Double-Loop Josephson Flux Transducer

Claudio Guarcello, R. Citro, Francesco Giazotto +1 more

We theoretically study the behavior of the critical current of a thermally biased tunnel Josephson junction with a particular design, in which the electrodes of the junction are enclosed in two different superconducting loops pierced by independent magnetic fluxes. In this setup, the superconducting gaps can be modified independently through the magnetic fluxes threading the loops. We investigate the response of the device as a function of the magnetic fluxes, by changing the asymmetry parameter, i.e., the ratio between the zero-temperature superconducting gaps $\ensuremath{\delta}={\mathrm{\ensuremath{\Delta}}}_{10}/{\mathrm{\ensuremath{\Delta}}}_{20}$ and the temperatures of the two rings. We show a magnetically controllable steplike response of the critical current, which emerges even in a symmetric junction, $\ensuremath{\delta}=1$. Finally, we discuss the optimal working conditions and the high response of the critical current to small changes in the magnetic flux, reporting good performance of a magnetic flux-to-critical current transducer, with a high transfer function that depends on the operating point, the temperature gradient, and the quality of the junction.

arXiv:2110.10585•Physical Review Applied•Jul 15, 2022•2 citations

Nonlocal superconducting quantum interference device

Taewan Noh, Andrew Kindseth, Venkat Chandrasekhar

Superconducting quantum interference devices (SQUIDs) that incorporate two superconductor/insulator/superconductor (SIS) Josephson junctions in a closed loop form the core of some of the most sensitive detectors of magnetic and electric fields currently available. SQUIDs in these applications are typically operated with a finite voltage which generates microwave radiation through the ac Josephson effect. This radiation may impact the system being measured. We describe here a SQUID in which the Josephson junctions are formed from strips of normal metal (N) in good electrical contact with the superconductor (S). Such SNS SQUIDs can be operated under a finite voltage bias with performance comparable or potentially better than conventional SIS SQUIDs. However, they also permit a mode of operation that is based on the unusual interplay of quasiparticle currents and supercurrents in the normal metal of the Josephson junction. The method allows measurements of the flux dependence of the critical current of the SNS SQUID without applying a finite voltage bias across the SNS junction, enabling sensitive flux detection without generating microwave radiation.

arXiv:2011.06667•Physical review. B./Physical review. B•Aug 4, 2021•13 citations

Energetics of an rf SQUID Coupled to Two Thermal Reservoirs

Bartłomiej Gardas, J. Łuczka, Andrzej Ptok +1 more

We study energetics of a Josephson tunnel junction connecting a superconducting loop pierced by an external magnetic flux (an rf SQUID) and coupled to two independent thermal reservoirs of different temperature. In the framework of the theory of quantum dissipative systems, we analyze energy currents in stationary states. The stationary energy flow can be periodically modulated by the external magnetic flux exemplifying the rf SQUID as a quantum heat interferometer. We also consider the transient regime and identify three distinct regimes: monotonic decay, damped oscillations and pulse-type behavior of energy currents. The first two regimes can be controlled by the external magnetic flux while the last regime is robust against its variation.

PLoS ONE•Dec 7, 2015•1 citation

OF JOSEPHSON MICROBRIDGES COUPLED BY SUPERCONDUCTING LOOPS

C. Varmazis

We have studied the phase locking of two and eight microbridge arrays shunted by superconducting loops in a dc SQUID configuration. The difference in phase between adjacent bridges is controlled by the applied flux, and thus the radiated power is a periodic function of this flux. With adjustment of the external flux, the individual bridge voltages can be made to add in phase. The effect of additional normal shunts on the phase locking is also investigated. MICROBRIDGES COUPLED BY SUPERCONDUCTING LOOPS Experiment sly on two Josephson microbridges have shown that it is possible to obtain nearly complete in phase coherent radiation with narrowed linewidth by coupling the microbridges with external shunts. To obtain greater ouput power and narrower linewidth it is desirable to phase lock larger arrays of bridges. The narrow range of bias currents over which locking occurs, however, imposes strict tolerances on the uniformity of bridge characteristics if a single current bias is used. In this paper we discuss experiments which eliminate this difficulty by using a superconducting loop to couple the junctions, i.e., a dc SQUID configuration, so that the average frequency of each junction is always equal even for non-identical junctions. Also the phase difference between the junctions in the absence Of noise is set by the amount of externally applied flux due to the fluxoid quantization condition. With identical bridges and zero applied flux, the junctions oscillate in phase. In the geometry used in

•Jan 1, 1979•0 citations
We study a superconducting loop that encloses a magnetic flux, connected to a superconducting and to a normal electrode, when a fixed electric current between the electrodes flows through the loop. The considered circuit does not contain Josephson junctions. We find that in a very broad range of parameters the current flow converges to a stationary regime. The potential difference between the electrodes depends on the magnetic flux, so that measuring this voltage would provide information on the enclosed flux. The sizes of the voltage and of the power dissipation could be appropriate for the design of a practical fluxmeter. We found narrow ranges of flux at which the voltage varies sharply with the flux.
The standard operation of a dc SQUID leads to oscillatory electric fields that emit electromagnetic radiation and can change the state of the measured sample. A stationary SQUID could be advantageous when back action on the measured sample has to be avoided. We study a superconducting loop that encloses a magnetic flux, connected to a superconducting and to a normal electrode, when a fixed electric current between the electrodes flows through the loop. The considered circuit does not contain Josephson junctions. We find that in a very broad range of parameters the current flow converges to a stationary regime. The potential difference between the electrodes depends on the magnetic flux, so that measuring this voltage would provide information on the enclosed flux. The influence of thermal noise was estimated. The sizes of the voltage and of the power dissipation could be appropriate for the design of a practical fluxmeter. We found narrow ranges of flux at which the voltage varies sharply with the flux.
The standard operation of a dc SQUID leads to oscillatory electric fields that emit electromagnetic radiation. We estimate the effect that this radiation could have on the measured sample. A stationary SQUID could be advantageous if the oscillation contribution to back action on the measured sample has to be avoided. We study a superconducting loop that encloses a magnetic flux, connected to a superconducting and to a normal electrode, when a fixed electric current between the electrodes flows across the loop. The considered circuit does not contain Josephson junctions. We find that in a very broad range of parameters the current flow converges to a stationary regime, i.e. the densities of normal current and of supercurrent become functions of position only, independent of time. The potential difference between the electrodes depends on the magnetic flux, so that measuring this voltage would provide information on the enclosed flux. The influence of thermal noise was estimated. The sizes of the voltage and of the power dissipation could be appropriate for the design of a practical fluxmeter. We found narrow ranges of flux at which the voltage varies sharply with the flux.
We theoretically study the behavior of the critical current of a thermally biased tunnel Josephson junction with a particular design, in which the electrodes of the junction are enclosed in two different superconducting loops pierced by independent magnetic fluxes. In this setup, the superconducting gaps can be modified independently through the magnetic fluxes threading the loops. We investigate the response of the device as a function of the magnetic fluxes, by changing the asymmetry parameter, i.e., the ratio between the zero-temperature superconducting gaps $\ensuremath{\delta}={\mathrm{\ensuremath{\Delta}}}_{10}/{\mathrm{\ensuremath{\Delta}}}_{20}$ and the temperatures of the two rings. We show a magnetically controllable steplike response of the critical current, which emerges even in a symmetric junction, $\ensuremath{\delta}=1$. Finally, we discuss the optimal working conditions and the high response of the critical current to small changes in the magnetic flux, reporting good performance of a magnetic flux-to-critical current transducer, with a high transfer function that depends on the operating point, the temperature gradient, and the quality of the junction.
Superconducting quantum interference devices (SQUIDs) that incorporate two superconductor/insulator/superconductor (SIS) Josephson junctions in a closed loop form the core of some of the most sensitive detectors of magnetic and electric fields currently available. SQUIDs in these applications are typically operated with a finite voltage which generates microwave radiation through the ac Josephson effect. This radiation may impact the system being measured. We describe here a SQUID in which the Josephson junctions are formed from strips of normal metal (N) in good electrical contact with the superconductor (S). Such SNS SQUIDs can be operated under a finite voltage bias with performance comparable or potentially better than conventional SIS SQUIDs. However, they also permit a mode of operation that is based on the unusual interplay of quasiparticle currents and supercurrents in the normal metal of the Josephson junction. The method allows measurements of the flux dependence of the critical current of the SNS SQUID without applying a finite voltage bias across the SNS junction, enabling sensitive flux detection without generating microwave radiation.
We study energetics of a Josephson tunnel junction connecting a superconducting loop pierced by an external magnetic flux (an rf SQUID) and coupled to two independent thermal reservoirs of different temperature. In the framework of the theory of quantum dissipative systems, we analyze energy currents in stationary states. The stationary energy flow can be periodically modulated by the external magnetic flux exemplifying the rf SQUID as a quantum heat interferometer. We also consider the transient regime and identify three distinct regimes: monotonic decay, damped oscillations and pulse-type behavior of energy currents. The first two regimes can be controlled by the external magnetic flux while the last regime is robust against its variation.
We have studied the phase locking of two and eight microbridge arrays shunted by superconducting loops in a dc SQUID configuration. The difference in phase between adjacent bridges is controlled by the applied flux, and thus the radiated power is a periodic function of this flux. With adjustment of the external flux, the individual bridge voltages can be made to add in phase. The effect of additional normal shunts on the phase locking is also investigated. MICROBRIDGES COUPLED BY SUPERCONDUCTING LOOPS Experiment sly on two Josephson microbridges have shown that it is possible to obtain nearly complete in phase coherent radiation with narrowed linewidth by coupling the microbridges with external shunts. To obtain greater ouput power and narrower linewidth it is desirable to phase lock larger arrays of bridges. The narrow range of bias currents over which locking occurs, however, imposes strict tolerances on the uniformity of bridge characteristics if a single current bias is used. In this paper we discuss experiments which eliminate this difficulty by using a superconducting loop to couple the junctions, i.e., a dc SQUID configuration, so that the average frequency of each junction is always equal even for non-identical junctions. Also the phase difference between the junctions in the absence Of noise is set by the amount of externally applied flux due to the fluxoid quantization condition. With identical bridges and zero applied flux, the junctions oscillate in phase. In the geometry used in