Many interesting physical systems have one thing in common. Their complexity makes it impossible to simulate them on conventional computers. Feynman’s idea of a quantum simulator for complex systems from 1982 [1] gives the possibility to study complex phenomena out of the reach of normal computers with tailored Hamiltonians. The world of ultra cold atoms offers a wide range of tunable parameters combined with a degree of control in unprecedented clean systems. Ultra cold quantum gases are the ideal tool for the realisation of quantum simulators and the study of phase diagrams of model systems. This thesis presents a new setup for Bose-Fermi mixtures experiments with regard to quantum simulations in optical lattices and arbitrary light potentials with a high resolution for detection and atom manipulation. The setup was designed to be a low maintenance, robust tool box for quantum simulations incorporating new technology developments. Both fundamental quantum statistics can be observed and different interaction regimes can be investigated with the help of Feshbach
Many interesting physical systems have one thing in common. Their complexity makes it impossible to simulate them on conventional computers. Feynman’s idea of a quantum simulator for complex systems from 1982 [1] gives the possibility to study complex phenomena out of the reach of normal computers with tailored Hamiltonians. The world of ultra cold atoms offers a wide range of tunable parameters combined with a degree of control in unprecedented clean systems. Ultra cold quantum gases are the ideal tool for the realisation of quantum simulators and the study of phase diagrams of model systems. This thesis presents a new setup for Bose-Fermi mixtures experiments with regard to quantum simulations in optical lattices and arbitrary light potentials with a high resolution for detection and atom manipulation. The setup was designed to be a low maintenance, robust tool box for quantum simulations incorporating new technology developments. Both fundamental quantum statistics can be observed and different interaction regimes can be investigated with the help of Feshbach
Since the first proposal of quantum simulation by Richard Feynman in 1982, multiple platforms have been explored to probe the behaviour of subatomic particles, exploiting the intrinsic nature of quantum systems. As one of the most promising candidates to realise large-scale simulation, quantum simulators with ultracold gases have attracted unprecedented attention. Featuring novel detection possibilities, a high degree of controllability and the extreme physical parameter regimes that can be reached in these ‘artificial solids’, quantum simulation with ultracold atoms has progressively matured to the point that it can be used to study exotic quantum phenomena. This review presents the theoretical fundamentals and recent advances in related technology and offers comment on future directions.
Advances in experiments on dilute ultracold atomic gases have given us access to highly tunable quantum systems. In particular, there have been substantial improvements in achieving different kinds of interaction between atoms. As a result, utracold atomic gases oer an ideal platform to simulate many-body phenomena in condensed matter physics, and engineer other novel phenomena that are a result of the exotic interactions produced between atoms. In this dissertation, I present a series of studies that explore the physics of dilute ultracold atomic gases in different settings. In each setting, I explore a different form of the inter-particle interaction. Motivated by experiments which induce artificial spin-orbit coupling for cold fermions, I explore this system in my first project. In this project, I propose a method to perform universal quantum computation using the excitations of interacting spin-orbit coupled fermions, in which effective p-wave interactions lead to the formation of a topological superfluid. Motivated by experiments which explore the physics of exotic interactions between atoms trapped inside optical cavities, I explore this system in a second project. I calculate the phase diagram of lattice bosons trapped in an optical cavity, where the cavity modes mediates effective global range checkerboard interactions between the atoms. I compare this phase diagram with one that was recently measured experimentally. In two other projects, I explore quantum simulation of condensed matter phenomena due to spin-dependent interactions between particles. I propose a method to produce tunable spin-dependent interactions between atoms, using an optical Feshbach resonance. In one project, I use these spin-dependent interactions in an ultracold Bose-Fermi system, and propose a method to produce the Kondo model. I propose an experiment to directly observe the Kondo effect in this system. In another project, I propose using lattice bosons with a large hyperfine spin, which have Feshbach-induced spin-dependent interactions, to produce a quantum dimer model. I propose an experiment to detect the ground state in this system. In a final project, I develop tools to simulate the dynamics of fermionic superfluids in which fermions interact via a short-range interaction.
In this habilitation-thesis a collection of 14 experiments is presented. In these experiments we have developed and used novel techniques to control ultracold gases on the quantum level. In brief, Bose-Einstein condensates (BEC) and degenerate Fermi gases of laser-cooled alkali atoms are subjected to specially designed optical and magnetic fields. The fields influence in a coherent way the behavior, properties and dynamics of the gases. On this basis we developed tools to prepare, coherently manipulate, and analyze pre-defined quantum states. With this high level of control, it was possible to investigate interesting physics phenomena, and we were able to achieve several breakthroughs in the field of ultracold atoms. Highlights of our experimental results include the demonstration of phase engineering of a BEC wavefunction where we created solitons in a BEC and studied their propagation. In another experiment we constructed a spatially resolved matter wave interferometer with which we mapped out the phase distribution on a condensate. Illuminating the BEC with a periodic pattern, i.e. an optical lattice, allowed us to study solid states physics phenomena. In a second set of experiments we demonstrated optically tuning of the interaction between atoms with optical Feshbach resonances. Employing either magnetically tunable Feshbach resonances or laser radiation, we were able to produce ground state molecules in well defined quantum states. This led to the production of the first molecular BEC. By tuning the coupling of atom pairs in a Fermi gas of atoms, we could for the first time investigate the so-called BEC-BCS crossover which describes the continuous change from a BEC superfluid to a Bardeen-Cooper Schrieffer (BCS) superfluid. Due to the excellent control on the quantum level, the developed cold atom techniques open up intriguing prospects for future applications and experiments. They represent a general tool box to investigate fundamental physical phenomena in a pure and undisturbed environment. In the future, cold atoms might serve as a testing ground for fundamental theories or as quantum simulators for complex systems.
Ultracold atoms in optical lattices provide an extremely clean and controllable setting to explore quantum many-body phases of matter. Here we give a brief review of the strong-correlation physics that has been realized using such ultracold atoms in optical lattices ranging from the realization of Hubbard models to studies of quantum magnetism and the detection of single atoms with lattice site resolution. All this has opened up fundamentally new opportunities for the investigation of quantum many-body systems. Introduction Over the past years, ultracold atoms in optical lattices have emerged as versatile new systems to explore the physics of quantum many-body systems. On the one hand, they can be helpful in gaining a better understanding of known phases of matter and their dynamical behavior; on the other hand, they allow one to realize completely novel quantum systems that have not been studied before in nature [1, 2, 3]. Commonly, the approach of exploring quantum many-body systems in such a way is referred to as “quantum simulations.” Examples of some of the first strongly interacting many-body phases that have been realized both in lattices and in the continuum include the quantum phase transition from a superfluid to a Mott insulator [4, 5, 6], fermionic Mott insulators [7, 8], the achievement of a Tonks- Girardeau gas [9, 10], and the realization of the Bose-Einsten condensate (BEC)– Bardeen-Cooper-Schrieffer (BCS) crossover (see also Chapter 12) in Fermi gas mixture [11] using Feshbach resonances [12]. In almost all of these experiments, detection was limited to time-of-flight imaging or more refined derived techniques that mainly characterized the momentum distribution of the quantum gas [2]. For several years, researchers in the field have therefore aspired to employ in situ single-particle detection methods for the analysis of ultracold quantum gases. Only recently has it become possible to implement such imaging techniques, marking a milestone for the characterization and manipulation of ultracold quantum gases [13, 14, 15, 16, 17]. In our discussion, we will focus on one of the most successful of these techniques based on high-resolution fluorescence imaging. Despite being a rather new technique, such quantum gas microscopy has already proven to be an enabling technology for probing and manipulating quantum many-body systems. For the first time, controllable and strongly interacting many-body systems, as realized with ultracold atoms, could be observed on a local scale [17, 16].
A cold atom experiment can be used to simulate analogous solid-state systems. This provides the bene�t of having a high degree of control over the system parameters and allowing direct detection methods. Disordered transport is one example of where such a system has much to o�er. This thesis concerns the development of a Bose-Fermi mixture experiment for study of two-dimensional optical lattice systems. To achieve single site resolution of the lattice, the experiment makes use of a double microscope set-up. One microscope provides imaging and the second is used to image a spatial light modulator onto the atomic plane. This provides an extremely versatile potential landscape for a trapped cloud. This thesis presents an overview of the set-up of the experiment including progress towards condensation. Particular focus is given to the design and characterisation of the vacuum system and the combined double microscope and spatial light modulator system. The vacuum system design requires a narrow magneto-optical trapping chamber. A novel epoxy sealing technique has been developed, allowing construction of a chamber of just 36mm thickness whilst maintaining high optical access. To provide illumination for the spatial light modulator a technique for homogenising the output of multi-mode �bre has been developed.
Imagine a new generation of computers that dramatically surpasses the most powerful supercomputers, being able to tackle the most challenging of computational problems. These problems arise, for example, in quantum physics where the computational power required to model a many-particle system increases exponentially with the number of its constituents, and as a consequence the calculations become prohibitively time-consuming. Nobel laureate Richard Feynman proposed this new type of computer in the early 1980s: ‘Let the computer itself be built of quantum mechanical elements which obey quantum mechanical laws.’ Such a quantum simulator would allow researchers to tackle challenging problems in condensed-matter physics. In particular many-body fermionic quantum systems are very difficult to compute due to the antisymmetric nature of the wave function, and the resulting sign problem for quantum Monte Carlo methods. This is why a quantum simulator will be an excellent test bed to investigate phenomena and properties of strongly correlated fermionic quantum systems. A powerful experimental platform to realize a quantum simulator is laser-cooled atoms [1] held in an artificial crystal of light, generated by superimposing laser beams. The atoms are kept in this optical lattice similar to marbles in the hollows of an egg carton, and they can mimic the behaviour of electrons in a real crystal. These systems interface atomic physics with condensed matter physics in a new way, as the tools of atomic physics allow for exquisite control of many experimental parameters, which are often inaccessible in solid state experiments. In-situ imaging techniques [2] using ‘quantum-gas microscopes’ constitute a new approach to the study of many-body quantum systems in an optical lattice with unprecedented resolution at the single-particle and single-site level [3,4]. This new method is complementary to earlier optical lattice experiments measuring distributions in momentum space after a time-of-flight expansion. A quantum-gas microscope uses an optical imaging system (Fig. 1a) for collecting the fluorescence light of ultracold atoms in an optical lattice with high spatial resolution comparable to the lattice spacing of ≈ 500 nm. (a) Atoms in optical lattice atoms are imaged with a high-resolution microscope objective [4]. (b) Single-site addressing is achieved by focussing a laser beam through the microscope onto selected atoms, bringing them into resonance with microwave radiation which produces spin flips [12]. (c) and (d) Single-atom-resolved fluorescence images of bosonic Mottinsulators [4,9]. (e) Deterministically prepared atom distribution using single-site addressing [12]. (f) Direct observation of single-atom quantum walks [15]. Fluorescence imaging of atoms in a quantum-gas microscope has made it possible to directly observe bosonic Mott insulators with single-atom resolution [4–6], giving access to in-situ measurements of temperature and entropy distributions. Subsequently, ground-breaking experiments in many-body quantum dynamics have been performed, such as the first direct observation of correlation spreading after quenches of the system to lower lattice depths [7]. Other experiments include the quantum simulation of an antiferromagnetic spin-1/2 chain [8], the realization of algorithmic cooling [9], the direct measurement of correlations across the superfluid-to-Mott-insulator transition [10], or the observation of the ‘Higgs’ amplitude mode [11]. The high-resolution imaging system is also capable of optically addressing individual atoms with sub-diffraction-limited resolution. For this purpose, a laser beam is focussed though the microscope objective onto selected lattice sites, bringing the atoms into resonance with microwave radiation which produces spin flips [12,13]. The preparation of arbitrary atom distributions in the lattice not only opens perspectives for neutral-atom quantum information processing, but also allows the deterministic creation of specific out-of-equilibrium situations, and their ensuing system dynamics can be studied with single-atom resolution. Examples include the creation of spin impurities and the study of their dynamics in a many-body system [14], the observation of quantum walks [15] and magnon-bound states [16], and the measurement of entanglement entropy [17]. The technique used for single-site-resolved detection of individual atoms in the optical lattice is fluorescence imaging. It requires laser cooling of the atoms to sub-Doppler temperatures while detecting the fluorescence photons emitted during this process. A challenge is to achieve a low particle loss rate and to prevent the atoms from hopping between lattice sites. In the case of the first quantum-gas microscopes, this has been implemented with bosonic rubidium-87 atoms, and also recently for ytterbium-174. However, it has proven more challenging for fermionic alkaline species such as potassium-40 and lithium-6, as their low mass and small excited state hyperfine splitting-prevented standard sub-Doppler cooling from working. As a result, it took several years to extend the quantum-gas microscope technique to fermionic species, and in 2015 several groups have demonstrated single-atom-resolved imaging of fermions [18]. In these setups, the direct observation of band insulators [19], fermionic Mott insulators [20,21] and even antiferromagnetic correlations [22] has been reported most recently. These developments provide fascinating opportunities to study many-body fermionic quantum systems with single-particle access. The fermionic nature of the electron is vital to understanding a range of phenomena within solid-state physics, such as electron pairing in superconductivity, and quantum magnetism. In this context, the quantum simulator will allow, e.g. for direct measurement of ordered quantum phases and out-of-equilibrium dynamics, with access to quantities such as spin--spin correlation functions and the growth of many-body entanglement. The high-resolution imaging systems could also be used to project tailored time-varying light fields onto the atoms, allowing the removal of high-entropy regions by locally modifying the confining potential to attain very low-entropy states. Attaining these low-entropy many-particle states is one of the key challenges in our field. In summary, quantum-gas microscopes offer unprecedented access to many-body quantum systems, and they will allow us to gain an even deeper insight into the intriguing world of quantum physics that governs the properties of strongly correlated materials. Using a well-controlled quantum system to simulate other quantum systems could help resolve some of the most challenging problems scientists face in condensed matter physics and materials science, but it will also provide new insights in quantum chemistry, high-energy physics and biology. SK acknowledges funding from the EU (ERC FERMILATT, SIQS, QuProCs) and SUPA.