We study the guiding of
87Rb 59
D5/2 Rydberg atoms in a linear, high-gradient, two-wire magnetic guide. Time-delayed microwave ionization and ion detection are used to probe the Rydberg atom motion. We observe guiding of Rydberg atoms over a period of 5 ms following excitation. The decay time of the guided-atom signal is about five times that of the initial state. We attribute the lifetime increase to an initial phase of
l-changing collisions and thermally induced Rydberg-Rydberg transitions. Detailed simulations of Rydberg-atom guiding reproduce most experimental observations and offer insight into the internal-state evolution.
We demonstrate the continuous injection and propagation of a cold atomic beam in a high-gradient (up to
2.7kG∕cm) magnetic guide of
1.7m length. Continuous injection is accomplished using a side-loading scheme that involves a sequence of two modified magneto-optic traps. Methods are developed to measure the atomic-flow temperatures and the flux under steady-state conditions. In the high-gradient portion of the guide, the guided atomic beam has a transverse temperature of $420\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{K}\ifmmode\pm\else\textpm\fi{}40\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{K}$, a longitudinal temperature of
1mK, and an average velocity of order
1m∕s. Using a radio-frequency current of a fixed frequency $\ensuremath{\nu}$ coupled directly into the guide wires, atoms exceeding a transverse energy of $h\ensuremath{\nu}$ can be continuously and selectively removed from the atomic beam.
The propagation of an atomic beam through a 1.7 m long magnetic guide with magnetic field gradient of up to 2.7 kGauss/cm has been demonstrated. The guide is side-loaded with an atomic beam from a Pyramidal MOT Low-velocity Intense Source. The atomic beam observed at the end of the guide has a flux of 3×10e7 atoms/s with a velocity of 1.2 m/s, a transverse temperature of 420±40 μK and a longitudinal temperature of 1 mK. The guided atomic beam was mode-filtered by selective removal of high-energy atoms using radio-frequency coupling to magnetically untrapped states. We found that the phase-space density of the atomic beam was very low for evaporative cooling to be functional. An imaging technique was developed to characterize the guided atomic flow in the presence of a high magnetic field gradient. This technique utilizes the open-channel transition to obtain nearly constant photon yield per atom independent of the location of the atom in the guide, providing a mapping of the fluorescence images to the atomic-density profiles. This technique was theoretically studied using Quantum Monte-Carlo Simulations and validated. A Zeeman slower was constructed and characterized to be used as the primary source of atoms to the magnetic guide. The Zeeman slower output atomic beam has a flux of 3×10e11 atoms/s at a velocity of 40 m/s. We have designed a new injection scheme to transfer atoms from the Zeeman slower to the magnetic guide efficiently. The details of a new method to evaporatively cool atoms in the magnetic guide using surface adsorption are described. Finally, a new guide geometry based on a spiral structure is discussed.