We consider the physical limitations imposed on the information content of an image by the wave and quantum nature of light, when the image is obtained by illuminating a reflecting or transmitting planar object by natural (i.e., fully thermalized) light, or by observation of an object emitting incoherent (thermal) radiation. The discreteness of the degrees of freedom and the statistical properties of thermal radiation are taken into account. We derive the maximum amount of information that can be retrieved from the object. This amount is always finite and is proportional to the area of the object, the solid angle under which the entrance pupil of the receiver is seen from the object, and the time of observation. An explicit expression for the information in the case where the information recorded by the receiver obeys Planck’s spectral distribution is obtained. The amount of information per photon of recorded radiation is a universal numerical constant, independent of the parameters of observation.
This chapter expresses that the quantum nature of light leads to intrinsic limits on the amount of information that can be sent optically. It considers encoding information in ways only possible for quantum systems. Information encoded in this way is referred to as quantum information. The technical challenges in working with quantum information are formidable. Quantum optics has some considerable advantages over alternative quantum systems from a quantum information point of view. Being quantum objects, photons offer more possible manipulations than classical carriers of bits. Any measurements that obtain any information about the bit values of one basis inevitably disturbs the bit values of the other basis. These features can be used to create a secure communication channel via the technique of quantum key distribution. Optical quantum computation has probably seen the most significant advance over the past decade, though there is still a long way to go before universal quantum computation becomes a reality.
What should an optical memory retain when only a limited amount of source information can be kept? This paper gives the complete quantum information frontier for a fixed Gaussian source and relevance channel, and identifies when a single retained qubit preserves correlations that every classical record loses. It also turns that advantage into a concrete test of whether received light belongs to its stored source preparation. The physical experiment and the complete frontier A fixed Gaussian state on
A is prepared with its actual purifier
C. A normal encoder acts on
C to produce memory
M, while a prescribed Gaussian channel maps
A to the relevant optical output
B. The source-information cost and useful correlation are
r=I(A:M) and
v=I(B:M), respectively. All logarithms are natural. The paper determines
CQ(R)=supN:I(A:M)≤RI(B:M). For every fixed faithful finite-mode Gaussian source and finite-mode Gaussian relevance channel, optimization over arbitrary normal quantum encoders reduces to Gaussian supporting values and a mixture of at most two Gaussian branches. The branch flag is physically retained. The unrestricted frontier is a supremum with no imposed memory dimension or memory-energy cap; an explicit finite approximation gives an error uniform in the information budget. Hard finite-dimensional implementations are treated separately. Why one qubit can preserve the leading low-brightness information For a thermal source with mean photon number
n and a thermal attenuator with transmissivity
0<η<1, write the output occupation as
ηn+b, where
b≥0 is the environment's added thermal occupation. With
g(x)=(x+1)log(x+1)−xlogx, the exact optimum over all normal classical records is
Ccl(n,R)=g(ηn+b)−g(ηuR+b),uR=g−1(max{g(n)−R,0}). A legal encoder applies vacuum loss with transmissivity
λ to the purifier and then coherently retains two levels, resetting the entire higher-photon tail. For fixed
b>0 and
0<λ<1/2, at the common budget
Rn=g(n)+g(λn)−g((1−λ)n), its actual relevance satisfies
v2=1+bηλnlog(1/n)+O(n),Ccl(n,Rn)=2ληlog(1+1/b)n+O(log(1/n)n). The full optical tail is included in the resource accounting. At
n=0.01,
η=b=0.5,
λ=0.2 and
R=0.023875, the certified predictive-mutual-information advantage exceeds 85%. The leading correlation is quantified by memory-side discord and can survive when the final output–memory state is separable. The vacuum-environment endpoint is evaluated separately for the same encoder. A same-resource correlation decision The receiver distinguishes matched source pairs from independent systems with identical marginals. For
k uses, the retained predictive memory obeys
dimKk≤2k and
I(Ak:Kk)≤kR, including all retained flags. Both competitors may make arbitrary joint binary measurements on the received optical modes and their retained memory. The received modes are common observation access, outside the predictive-memory cap. Let
αk be the missed-correlation probability and
βk the false-match probability. For every classical block encoder, even with an unrestricted classical alphabet, the fixed-error converse is
αk≤ϵ⟹βk≥exp[−1−ϵkcnR+log2],cn=ηlog(1+1/n)log(1+1/(ηn+b)). At the finite parameters above and
ϵ=0.1, the product-qubit encoder achieves an asymptotic false-match exponent of 0.0049 nats per pair, whereas every classical block strategy has exponent below 0.003138386231. This uses one qubit per source pair and identical measurement permissions. It is an asymptotic discrimination guarantee, distinct from the 85% single-copy information comparison; it specifies neither a finite-sample threshold nor a laboratory receiver circuit. The integrated paper contains the complete proofs, resource accounting and figures. The exact thermal classical comparator, the finite-memory construction and the block-testing connection have explicit proof dependencies separate from the general Gaussian-frontier reduction.
Any radar setup is limited by the physical properties of the electromagnetic radiation used to gather information about a target. Some of the limits on accuracy are due to the quantum nature of the photons, others due to the limitations of the electronic equipment used to perform the modulations. The techniques used to record the characteristics of the radiation are as important as the method by which that information is analyzed and interpreted. In each stage of the travels of the radiation, from creation and propagation to recording and analysis, the physical properties of the photons involved play a key role in the behavior of the radiation. The techniques by which these properties are modulated, monitored and recorded are also important. In this paper, these topics are discussed and weighed in detail. From this understanding of the flow of information a theoretical apparatus will be constructed that will be capable of recovering a maximum of that information for later use.
Imaging is the estimation of the spatial distribution of a physical object by measuring the optical radiation it emits, or by making use of an optical wave that interacts with the object, via reflection or transmission, for example, before being measured by a detector. The resolution of an imaging system is limited by the inability to localize the optical field at points of the object. Under otherwise ideal conditions, resolution is limited by diffraction. The sensitivity of an imaging system is limited by the uncertainty in the measurement. Under ideal conditions, this is determined by photon noise, which depends on the statistical fluctuations of the light. In conventional imaging systems, an extended detector, such as a CCD camera or an array detector, measures the spatial distribution of the optical intensity, which is proportional to the photon flux density. In interferometric systems, the spatial distribution of the optical field is inferred from measurements of the optical intensity. With the emergence of coherence theory, imaging systems based on measurements of the second-order coherence function at pairs of points in the detection plane were developed. An example is the imaging of an incoherent object based on the van Cittert-Zernike theorem. Imaging systems based on measurement of intensity correlation, or the photon coincidence rate, at pairs of points, were developed in the 1960s. A classic example of the photon-correlation imaging of an object emitting thermal light is stellar imaging using a Hanbury-Brown-Twiss intensity-correlation interferometer. More recently, two-photon light, which may be generated via spontaneous parametric downconversion in a second-order nonlinear optical crystal, has been used for imaging. This type of two-photon (or biphoton) imaging, which has come to be called quantum imaging, is also based on the measurement of photon coincidence by the use of photon-counting array detectors or by scanning two photon-counting detectors at pairs of points. To compare the resolution and sensitivity of imaging systems based on the aforementioned types of measurements, it is necessary to derive expressions for the measured quantities in terms of the object distribution. The point-spread functions based on such expressions can be used to assess the resolution. One measure of the sensitivity of the imaging process is the signal-to-noise ratio (SNR) of the measured variables. The statistical nature of the light source must be known in order to determine the SNR. The purpose of this chapter is to compare the resolution and sensitivity of photon-correlation imaging systems that make use of thermal light and two-photon light. We will henceforth refer to these two imaging modalities as classical and quantum photon-correlation imaging, or simply classical and quantum imaging, respectively. Clearly, light in other quantum states can also be used for imaging.