Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Softwaretechnik-Trends

High Frequency Effects and Performance of a 600 GHz-635 GHz SIS Receiver Using Nb/A10x/Nb Junctions

Morvan C. Salez, Pascal Febvre, William R. McGrath, B. Bumble, Henry George LeDuc

Published May 1, 1994• 2 citations
OpenAlex

Abstract

A 600 GHz - 635 GHz waveguide SIS heterodyne receiver was built and used for astronomical observations at the Caltech Submillimeter Observatory (CSO) in Hawaii.

Related papers

A 665 GHz Waveguide Receiver Using a Tuned 0.5 μm 2 Nb/AlO x /Nb SIS Tunnel Junction

J. Kooi, Mansun Chan, Henry George LeDuc +1 more

We report recent results on a 580-740 GHz SIS heterodyne receiver employing a tuned 0.50Am Nb/A10x/Nb SIS tunnel junction. The receiver has been successfully installed at the Caltech Submillimeter Observatory, Hawaii. Results of an untuned device in the same waveguide block were presented at the fifth International THz Conference. Since the mixer is meant to be operated near the superconducting gap frequency of niobium (2,L/h 690 GHz), special has been taken to minimize the absorption loss in the rf matching network. To this effect we propose the use of a RF matching network that constitutes a hybrid between the well know end-loaded stub and radial stub matching networks. We have measured uncorrected DSB receiver temperatures as low as 160K from 680to 702 Gliz, 200K at 725GHz and 120K from 585-640 GHz. The uncorrected mixer noise temperature at 702 Gliz is about 125K, of which 62K can be directly contributed to the front end optics loss. Mixer conversion loss at 702 GHz is 7dB, of which 0.9dB is due to the absorption loss in the Nb film. This results in a corrected mixer noise temperature of 63K, 1.7 times the quantum noise limit.

Softwaretechnik-Trends•Mar 1, 1996•1 citation

A Submillimeter Wave SIS Heterodyne Receiver Using Nb Tunnel Junctions with Integrated Tuning Circuits for 626 GHz

Morvan C. Salez, William R. McGrath, Pascal Febvre +2 more

So far, the most sensitive heterodyne receivers in the millimeter-wave and submillimeter-wave frequency ranges have used the mixing response of the quasiparticle currents in SIS tunnel junctions.

•Aug 11, 1993•0 citations

A 492 GHz quasioptical SIS receiver for submillimeter astronomy

Greg Engargiola, Jonas Stasys Zmuidzinas, K. Y. Lo

A 492 GHz quasioptical superconductor-insulator-superconductor (SIS) heterodyne receiver for submillimeter astronomy has been constructed with a double-sideband noise temperature of 170±25 K, where the system response is an average over a 600 MHz i.f. bandwidth centered at 1.5 GHz. The excellent sensitivity is achieved through use of a planar twin-slot antenna feeding a pair of Nb–Al2O3–Nb junctions linked by an inductance. A main beam of f/15 has been measured. The performance of this receiver is comparable to that of the best 492 GHz waveguide receivers currently in operation.

Review of Scientific Instruments•Jun 1, 1994•14 citations

A 547 GHz SIS receiver employing a submicron Nb junction with an integrated matching circuit

Pascal Febvre, William R. McGrath, P. D. Batelaan +4 more

A heterodyne receiver using an SIS (superconductor-insulator-superconductor) waveguide mixer with two mechanical tuners has been built and characterized over the frequency range of 460 GHz to 630 GHz. This receiver is designed for radioastronomy applications. The mixer uses high-current-density, 0.25- mu m/sup 2/, Nb/AlO/sub x//Nb SIS tunnel junctions with integrated superconductive RF circuits to tune the junction capacitance. A DSB (double sideband) receiver noise temperature as low as 200+or-17 K has been obtained at 540 GHz. In addition, negative differential resistance has been observed in the DC I-V (current-voltage) curve at 487-491 GHz.>

IEEE MTT-S International Microwave Symposium digest•Dec 30, 2002•4 citations

Preliminary design of a superconducting heterodyne array receiver for Leighton Chajnantor Telescope

Shuqin Wang, Dong Liu, Boliang Liu +6 more

The Leighton Chajnantor Telescope (LCT) project, sponsored by Shanghai Normal University in collaboration with Caltech and the University of Concepción, is seeking to relocate the Caltech Submillimeter Observatory (CSO)[1] from Mauna Kea, Hawaii to Llano de Chajnantor Observatory on the Chajnantor Plateau in Chile. The LCT will be equipped with a new 345-GHz band heterodyne array receiver of 3×3 beams and quantum-limited sensitivity. Based on superconducting Nb/Al-AlOx/Nb tunnel junction (SIS) mixers, we have developed a compact 1×3 array as one unit of the new heterodyne array receiver. Detailed design and measurement results will be presented.

Infrared, Millimeter-Wave, and Terahertz Technologies•Dec 16, 2022•4 citations

A Low Noise NbTiN-Based 850 GHz SIS Receiver for the Caltech Submillimeter Observatory

J. Kooi, Jonathan H. Kawamura, J. Chen +7 more

International Journal of Infrared and Millimeter Waves•Sep 1, 2000•18 citations
We report recent results on a 580-740 GHz SIS heterodyne receiver employing a tuned 0.50Am Nb/A10x/Nb SIS tunnel junction. The receiver has been successfully installed at the Caltech Submillimeter Observatory, Hawaii. Results of an untuned device in the same waveguide block were presented at the fifth International THz Conference. Since the mixer is meant to be operated near the superconducting gap frequency of niobium (2,L/h 690 GHz), special has been taken to minimize the absorption loss in the rf matching network. To this effect we propose the use of a RF matching network that constitutes a hybrid between the well know end-loaded stub and radial stub matching networks. We have measured uncorrected DSB receiver temperatures as low as 160K from 680to 702 Gliz, 200K at 725GHz and 120K from 585-640 GHz. The uncorrected mixer noise temperature at 702 Gliz is about 125K, of which 62K can be directly contributed to the front end optics loss. Mixer conversion loss at 702 GHz is 7dB, of which 0.9dB is due to the absorption loss in the Nb film. This results in a corrected mixer noise temperature of 63K, 1.7 times the quantum noise limit.
A 492 GHz quasioptical superconductor-insulator-superconductor (SIS) heterodyne receiver for submillimeter astronomy has been constructed with a double-sideband noise temperature of 170±25 K, where the system response is an average over a 600 MHz i.f. bandwidth centered at 1.5 GHz. The excellent sensitivity is achieved through use of a planar twin-slot antenna feeding a pair of Nb–Al2O3–Nb junctions linked by an inductance. A main beam of f/15 has been measured. The performance of this receiver is comparable to that of the best 492 GHz waveguide receivers currently in operation.
A heterodyne receiver using an SIS (superconductor-insulator-superconductor) waveguide mixer with two mechanical tuners has been built and characterized over the frequency range of 460 GHz to 630 GHz. This receiver is designed for radioastronomy applications. The mixer uses high-current-density, 0.25- mu m/sup 2/, Nb/AlO/sub x//Nb SIS tunnel junctions with integrated superconductive RF circuits to tune the junction capacitance. A DSB (double sideband) receiver noise temperature as low as 200+or-17 K has been obtained at 540 GHz. In addition, negative differential resistance has been observed in the DC I-V (current-voltage) curve at 487-491 GHz.>
The Leighton Chajnantor Telescope (LCT) project, sponsored by Shanghai Normal University in collaboration with Caltech and the University of Concepción, is seeking to relocate the Caltech Submillimeter Observatory (CSO)[1] from Mauna Kea, Hawaii to Llano de Chajnantor Observatory on the Chajnantor Plateau in Chile. The LCT will be equipped with a new 345-GHz band heterodyne array receiver of 3×3 beams and quantum-limited sensitivity. Based on superconducting Nb/Al-AlOx/Nb tunnel junction (SIS) mixers, we have developed a compact 1×3 array as one unit of the new heterodyne array receiver. Detailed design and measurement results will be presented.