Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE MTT-S International Microwave Symposium digest

Ultra-wide IF bandwidth — The next frontier for SIS receivers

Edward Tong, Paul Grimes, Jonathan Weintroub, R. Blundell

Published May 1, 2015• 2 citations
Publisher

Abstract

Tucker's theory of quantum mixing can be extended to model distributed series connected SIS mixers, which offer a lower capacitance and a higher dynamic range. These mixers have wider IF bandwidth than single junction mixer. Coupled with the emerging ultra-wide band technologies in low noise amplifier and fast digital signal processing, they open a new frontier of ultra-wide band receivers. We report on the development of the wideband SIS receivers for the Submillimeter Array, designed with Tucker's theory.

DOI
10.1109/mwsym.2015.7166804

Related papers

Design and Performance of a 3-Junction Series Distributed SIS Mixer for Wide IF Applications

Edward Tong, Paul Grimes, A. Barbier +2 more

Series distributed superconductor-insulator-superconductor mixers have been used to provide very wide instantaneous bandwidth of operation. In this paper, we explore a design based on a 3-junction array in which the junctions themselves form part of the RF tuning network of the mixer. We have developed mixers based on these designs for use in the 200 and 300 GHz bands. Receivers incorporating these wideband mixers demonstrate very low noise temperature. At a local oscillator frequency of 300 GHz, the lowest measured intermediate frequency noise temperature is about 42 K and the usable intermediate frequency bandwidth extends from 6 to 16.5 GHz. Both the design theory and experimental results are presented.

IEEE Transactions on Applied Superconductivity•Dec 20, 2012•12 citations

Development of Submillimeter SIS Mixers and Broadband HEMT Amplifiers

Jonas Stasys Zmuidzinas

The goal of this project is to develop and demonstrate a new generation of superconducting tunnel junction (SIS) receivers with extremely wide instantaneous (intermediate-frequency, or IF) bandwidths, of order 12 GHz. Such mixers would allow rapid submillimeter wavelength spectral line surveys to be carried out with SOFIA, and could potentially be used for future submillimeter space missions such as SAFIR. There are two major components which are being developed: (1) SIS mixers with broad (12 GHz) IF bandwidths; and (2) low-noise, broadband microwave, (6-18 GHz) amplifiers, which amplify the IF output from the SIS mixer. The work on these components is discussed in two sections

•Oct 5, 2004•0 citations

A Fixed-Tuned SIS Mixer with Ultra-Wide-Band IF and Quantum-Limited Sensitivity for ALMA Band 3 (84-116 GHz) Receivers

S.-K. Pan, Anthony R. Kerr, M.W. Pospieszalski +13 more

Abstract- This paper describes an 84-116 GHz Nb/Al-oxide/Nb SIS mixer with multi-octave IF bandwidth and quantum-limited sensitivity. The mixer can be integrated with a three-stage 4-12 GHz HFET preamplifier or fitted with a coaxial connector for operation with an external isolator and IF amplifier. An 84-116 GHz receiver using the mixer with an integrated 4-12 GHz HFET preamplifier has a double sideband noise temperature of 16-20 K ( 3 to 4 h</kB) over most of the IF band. Analysis of the mixer-preamp using Tucker=s theory shows good agreement with measurements. The mixer is easy to build and is being used as a building block for the Band 3 sideband-separating receivers for the Atacama Large Millimeter Array (ALMA)**. With minor modifications, this mixer design can be scaled to other ALMA bands. I

•Jan 1, 2004•23 citations

Analyzing and improving the IF bandwidth performance for 345 GHz SIS mixer

Chen Peng, Boxun Wang, Liping Zuo +5 more

Abstract The wide intermediate frequency (IF) bandwidth is a core performance metric for terahertz heterodyne receivers, and a wide-IF superconductor–insulator–superconductor (SIS) mixer is key to achieving this. This paper presents the simulation-based design, optimization, and performance analysis of a 345 GHz superconducting SIS mixer developed for wide-IF applications. The mixer employs a parallel-connected twin-junction tuning structure and integrates a dedicated IF impedance matching circuit, achieving wideband impedance matching between the mixer output port and low-noise amplifier. The design is based on two tunnel junction technologies, AlO x and AlN, with critical current densities of 1 kA·cm −2 and 25 kA·cm −2 , respectively. We systematically studied the effects of different junction materials and junction areas on the RF and IF bandwidth performance of the SIS mixer. It is found that for AlN-barrier junctions with diameters of 0.6 μ m and 0.8 μ m, the receiver’s IF noise temperature slowly decreased as the IF frequency increased at a high local oscillator frequency. Furthermore, we incorporated the calculated IF output port impedance into the mixer model for correction and introduced an integrated IF circuit approach, overcoming the original IF bandwidth limitation. Simulations show that the newly designed mixer achieves the stringent sensitivity and bandwidth requirements across the 320–370 GHz range, delivering an IF bandwidth of 4–22 GHz and a receiver noise temperature of 39–73 K. Notably, the −3 dB IF bandwidth is improved by more than 1.5 times compared to conventional AlO x -based designs. These findings provide new design guidelines and quantitative criteria for next-generation wide-IF receivers and other high-frequency applications requiring a wide IF bandwidth.

Journal of Physics D Applied Physics•Oct 6, 2026•0 citations

Theoretical SIS mixer research

M. J. Feldman

Theoretical research has been conducted to elucidate the basic physics behind the properties of superconductor-insulator-superconductor (SIS) tunnel junction receiving devices. The properties of SIS mixers using nonideal junctions and finite LO power, were determined by analytic expansion of the equations of the quantum theory of mixing, and also by computer simulations of SIS receivers over the entire range of experimental parameters. The result is a new coherent and intuitive picture of SIS mixer behavior. Many of the outstanding mysteries and questions about SIS receivers are resolved, and this contributes greatly to the design and interpretation of SIS mixer experiments. Other calculations show how to achieve sub-quantum noise temperatures in the phase sensitive SIS mixer, an important step towards realization of ultra-low- noise detectors. A simplified model casts doubt on the superlative experimental results reported for the rf-series dc-parallel biased array SIS mixer. Superconductivity; SIS mixer; Submillimeter-wave detection.

Final Technical Report•Jun 1, 1993•0 citations

Development of Balanced SIS Mixers for ALMA Band-10

S. V. Shitov, Oleg V. Koryukin, Y. Uzawa +3 more

down to only 2-3 p,W for a two polarized SIS receiver, if submicron SIS junctions are used in the balanced mixer configuration. There are a few options for waveguide balanced and sideband separating mixers employing the straightforward connection of the DSB mixers using hybrid couplers [2]. However, the low-loss operation of the waveguide-based connections and the required balancing of the mixers both are of a great concern in the THz frequency range. This is a good reason to look for the more compact design of the RF circuit for waveguide or/and consider an integrated quasioptical SIS mixer design. It is known that the conversion gain of a SIS junction is reducing essentially above the gap frequency, and it turns negligibly low above twice the gap frequency. The ALMA Band-10 DSB receiver specification for TRx is 230 K within 80% of the band 787-950 GHz and 345 K at any frequency of the band. The IF range of 4-12 GHz is required for the DSB receiver with ripples below 4 dB within each 2 GHz segment. All these make the accurate design of the mixer's RF and IF circuits very important. Since the Q-factor of a SIS junction at submillimeter wavelength is high (Q>>1), the twin-SIS junction [3]-[5] is a good solution providing about twice RF bandwidth of a single junction. However, it is known that two junctions in the twin-SIS are unequally coupled at RF across the band, thus providing less gain than one can expect from the equivalent junction of the same R. This effect is difficult to estimate experimentally, since two junctions are connected in parallel at DC. The growing importance of such accurate analysis in THz range can be motivated with concern of the essential drop of conversion gain of a Nb-based SIS mixer closer to 1 THz. To analyze the effect of unequal pump and dynamic resistance for a two-junction SIS mixer, the Tucker's 3-port model can be used yet being expanded to multi-junction mixing arrays. Abstract-A few concepts of a wide-band balanced SIS mixer employing submicron-sized SIS junctions are under development for 787-950 GHz frequency range. A quasioptical DSB balanced mixer with integrated cross-slot antenna is considered as the less laborious and cheaper option. The silicon lens-antenna beam efficiency is expected above 80 % across the whole band with first-order sidelobe below -16 dB. To use the conservative horn antenna solution, a singlechamber waveguide DSB balanced mixer is developed. Two equal probe-type SIS chips are inserted into a full-height waveguide through its opposite broad walls; these two mixers are driven by the signal waveguide in series. The LO current is transferred to the mixers in parallel via a capacitive probe inserted through the narrow wall of the signal waveguide from the neighboring LO waveguide. The HFSS model demonstrated the LO power coupling efficiency above -3 dB, almost perfect signal transfer and the LO cross talk below 30 dB that take into account misalignment (misbalance) of the chips. It is demonstrated numerically using Tucker's 3-port model that unequal pump of junctions of a twin-SIS mixer can lead, in spite of the perfect signal coupling, to degradation of the gain performance up to -3 dB, especially at the top of the ALMA Band-10.

•May 1, 2006•2 citations
Tucker's theory of quantum mixing can be extended to model distributed series connected SIS mixers, which offer a lower capacitance and a higher dynamic range. These mixers have wider IF bandwidth than single junction mixer. Coupled with the emerging ultra-wide band technologies in low noise amplifier and fast digital signal processing, they open a new frontier of ultra-wide band receivers. We report on the development of the wideband SIS receivers for the Submillimeter Array, designed with Tucker's theory.
Series distributed superconductor-insulator-superconductor mixers have been used to provide very wide instantaneous bandwidth of operation. In this paper, we explore a design based on a 3-junction array in which the junctions themselves form part of the RF tuning network of the mixer. We have developed mixers based on these designs for use in the 200 and 300 GHz bands. Receivers incorporating these wideband mixers demonstrate very low noise temperature. At a local oscillator frequency of 300 GHz, the lowest measured intermediate frequency noise temperature is about 42 K and the usable intermediate frequency bandwidth extends from 6 to 16.5 GHz. Both the design theory and experimental results are presented.
The goal of this project is to develop and demonstrate a new generation of superconducting tunnel junction (SIS) receivers with extremely wide instantaneous (intermediate-frequency, or IF) bandwidths, of order 12 GHz. Such mixers would allow rapid submillimeter wavelength spectral line surveys to be carried out with SOFIA, and could potentially be used for future submillimeter space missions such as SAFIR. There are two major components which are being developed: (1) SIS mixers with broad (12 GHz) IF bandwidths; and (2) low-noise, broadband microwave, (6-18 GHz) amplifiers, which amplify the IF output from the SIS mixer. The work on these components is discussed in two sections
Abstract- This paper describes an 84-116 GHz Nb/Al-oxide/Nb SIS mixer with multi-octave IF bandwidth and quantum-limited sensitivity. The mixer can be integrated with a three-stage 4-12 GHz HFET preamplifier or fitted with a coaxial connector for operation with an external isolator and IF amplifier. An 84-116 GHz receiver using the mixer with an integrated 4-12 GHz HFET preamplifier has a double sideband noise temperature of 16-20 K ( 3 to 4 h</kB) over most of the IF band. Analysis of the mixer-preamp using Tucker=s theory shows good agreement with measurements. The mixer is easy to build and is being used as a building block for the Band 3 sideband-separating receivers for the Atacama Large Millimeter Array (ALMA)**. With minor modifications, this mixer design can be scaled to other ALMA bands. I
Abstract The wide intermediate frequency (IF) bandwidth is a core performance metric for terahertz heterodyne receivers, and a wide-IF superconductor–insulator–superconductor (SIS) mixer is key to achieving this. This paper presents the simulation-based design, optimization, and performance analysis of a 345 GHz superconducting SIS mixer developed for wide-IF applications. The mixer employs a parallel-connected twin-junction tuning structure and integrates a dedicated IF impedance matching circuit, achieving wideband impedance matching between the mixer output port and low-noise amplifier. The design is based on two tunnel junction technologies, AlO x and AlN, with critical current densities of 1 kA·cm −2 and 25 kA·cm −2 , respectively. We systematically studied the effects of different junction materials and junction areas on the RF and IF bandwidth performance of the SIS mixer. It is found that for AlN-barrier junctions with diameters of 0.6 μ m and 0.8 μ m, the receiver’s IF noise temperature slowly decreased as the IF frequency increased at a high local oscillator frequency. Furthermore, we incorporated the calculated IF output port impedance into the mixer model for correction and introduced an integrated IF circuit approach, overcoming the original IF bandwidth limitation. Simulations show that the newly designed mixer achieves the stringent sensitivity and bandwidth requirements across the 320–370 GHz range, delivering an IF bandwidth of 4–22 GHz and a receiver noise temperature of 39–73 K. Notably, the −3 dB IF bandwidth is improved by more than 1.5 times compared to conventional AlO x -based designs. These findings provide new design guidelines and quantitative criteria for next-generation wide-IF receivers and other high-frequency applications requiring a wide IF bandwidth.
Theoretical research has been conducted to elucidate the basic physics behind the properties of superconductor-insulator-superconductor (SIS) tunnel junction receiving devices. The properties of SIS mixers using nonideal junctions and finite LO power, were determined by analytic expansion of the equations of the quantum theory of mixing, and also by computer simulations of SIS receivers over the entire range of experimental parameters. The result is a new coherent and intuitive picture of SIS mixer behavior. Many of the outstanding mysteries and questions about SIS receivers are resolved, and this contributes greatly to the design and interpretation of SIS mixer experiments. Other calculations show how to achieve sub-quantum noise temperatures in the phase sensitive SIS mixer, an important step towards realization of ultra-low- noise detectors. A simplified model casts doubt on the superlative experimental results reported for the rf-series dc-parallel biased array SIS mixer. Superconductivity; SIS mixer; Submillimeter-wave detection.
down to only 2-3 p,W for a two polarized SIS receiver, if submicron SIS junctions are used in the balanced mixer configuration. There are a few options for waveguide balanced and sideband separating mixers employing the straightforward connection of the DSB mixers using hybrid couplers [2]. However, the low-loss operation of the waveguide-based connections and the required balancing of the mixers both are of a great concern in the THz frequency range. This is a good reason to look for the more compact design of the RF circuit for waveguide or/and consider an integrated quasioptical SIS mixer design. It is known that the conversion gain of a SIS junction is reducing essentially above the gap frequency, and it turns negligibly low above twice the gap frequency. The ALMA Band-10 DSB receiver specification for TRx is 230 K within 80% of the band 787-950 GHz and 345 K at any frequency of the band. The IF range of 4-12 GHz is required for the DSB receiver with ripples below 4 dB within each 2 GHz segment. All these make the accurate design of the mixer's RF and IF circuits very important. Since the Q-factor of a SIS junction at submillimeter wavelength is high (Q>>1), the twin-SIS junction [3]-[5] is a good solution providing about twice RF bandwidth of a single junction. However, it is known that two junctions in the twin-SIS are unequally coupled at RF across the band, thus providing less gain than one can expect from the equivalent junction of the same R. This effect is difficult to estimate experimentally, since two junctions are connected in parallel at DC. The growing importance of such accurate analysis in THz range can be motivated with concern of the essential drop of conversion gain of a Nb-based SIS mixer closer to 1 THz. To analyze the effect of unequal pump and dynamic resistance for a two-junction SIS mixer, the Tucker's 3-port model can be used yet being expanded to multi-junction mixing arrays. Abstract-A few concepts of a wide-band balanced SIS mixer employing submicron-sized SIS junctions are under development for 787-950 GHz frequency range. A quasioptical DSB balanced mixer with integrated cross-slot antenna is considered as the less laborious and cheaper option. The silicon lens-antenna beam efficiency is expected above 80 % across the whole band with first-order sidelobe below -16 dB. To use the conservative horn antenna solution, a singlechamber waveguide DSB balanced mixer is developed. Two equal probe-type SIS chips are inserted into a full-height waveguide through its opposite broad walls; these two mixers are driven by the signal waveguide in series. The LO current is transferred to the mixers in parallel via a capacitive probe inserted through the narrow wall of the signal waveguide from the neighboring LO waveguide. The HFSS model demonstrated the LO power coupling efficiency above -3 dB, almost perfect signal transfer and the LO cross talk below 30 dB that take into account misalignment (misbalance) of the chips. It is demonstrated numerically using Tucker's 3-port model that unequal pump of junctions of a twin-SIS mixer can lead, in spite of the perfect signal coupling, to degradation of the gain performance up to -3 dB, especially at the top of the ALMA Band-10.