Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics Letters

Quantum Information Transfer Based on Frequency Modes in Circuit QED

Chao-Quan Wang

Published Aug 1, 2012• 1 citation
Publisher

Abstract

We propose a scheme for implementing quantum information transfer based on frequency modes of microwave photons in a superconducting circuit. In our proposal, quantum information can be encoded on frequency modes of microwave photons, which act as a qubit in the resonator. Operations for the qubit, which is a process involving parametric frequency conversion, can be implemented by adjusting biased-dc superconducting quantum interference (SQUID). The coupling between two resonators can be controlled by tuning the frequency of the LC circuit inserted by a dc SQUID with two Josephson-junctions (2JJ-SQUID). Compared with previous ones, our work can avoid dephasing and decoherence resulting from atom decay. In addition, the resonator which includes multiple photons in two frequency modes can play a role of an identical atomic ensemble, which could lead to photon blockade.

DOI
10.1088/0256-307x/29/8/084209

Related papers

Entangled Frequency-Tunable Microwave Photons in a Superconducting Circuit

Kaixuan Zhang, Chunhai Cao, Jian Chen +3 more

We propose a frequency-tunable source to emit entangled microwave photons on the platform of a superconducting circuit, in which two superconducting transmission-line resonators are coupled via a capacitor and one resonator is inserted with a superconducting quantum interference device (SQUID) in the center. By pumping the circuit appropriately with an external coherent microwave signal through the SQUID, microwave photons are emitted in pairs out of the circuit. The entanglement between the two modes is demonstrated by numerically calculating the second-order coherence function and the logarithmic negativity of the output microwave signals. Due to the tunability of SQUID’s equivalent inductance, the frequencies of the entangled microwave photons can be tuned by an external flux bias in situ. Our proposal paves a new way for obtaining entangled frequency-tunable two-mode microwave photons.

Applied Sciences•Mar 14, 2023•1 citation

Control of the transition frequency of a superconducting flux qubit by longitudinal coupling to the photon number degree of freedom in a resonator

Hiraku Toida, Takuya Ohrai, Yuichiro Matsuzaki +2 more

We control the transition frequency of a superconducting flux qubit coupled to a frequency-tunable resonator comprising a direct current superconducting quantum interference device (dc SQUID) by microwave driving. The dc SQUID mediates the coupling between microwave photons in the resonator and a flux qubit. The polarity of the frequency shift depends on the sign of the flux bias for the qubit and can be both positive and negative. The absolute value of the frequency shift becomes larger by increasing the photon number in the resonator. These behaviors are reproduced by a model considering the magnetic interaction between the flux qubit and dc SQUID. The tuning range of the transition frequency of the flux qubit reaches $\ensuremath{\approx}1.9\phantom{\rule{0.16em}{0ex}}\mathrm{GHz}$. The effect of photon number fluctuation in the resonator to the dephasing rate of the flux qubit is also discussed.

arXiv:2005.06155•Physical review. B./Physical review. B•Sep 3, 2020•3 citations

Parametric four-wave mixing toolbox for superconducting resonators

A. V. Sharypov, Xiu–Hao Deng, Lin Tian

We study a superconducting circuit that can act as a toolbox to generate various Bogoliubov linear and nonlinear quantum operations on the microwave photon modes of superconducting resonators within one single circuit. The quantum operations are generated by exploring dispersive four-wave mixing (FWM) processes involving the resonator modes. Different FWM geometries can be realized by adjusting the circuit parameters and by applying appropriate microwave drivings. We illustrate this scheme using a circuit made of two superconducting qubits that couple with each other. Each qubit couples with one superconducting resonator. We also discuss main sources of quantum errors in this system and study the fidelity of the quantum operations by numerical simulation. Our scheme provides a practical approach to realize quantum information protocols on superconducting resonators.

arXiv:1204.5450•Physical Review B•Jul 18, 2012•13 citations

Entangling two high-Q microwave resonators assisted by a resonator terminated with SQUIDs

Ming Li, Ming Hua, Mei Zhang +1 more

Abstract We propose a superconducting circuit for quantum information processing (QIP) on high-quality (high-Q) superconducting resonators (SRs). In the circuit, two high-Q SRs are coupled to a high-frequency SR (acts as a quantum bus) assisted by superconducting quantum interference devices (SQUIDs) terminate in both ends of the high-frequency resonator. Each coupling strength between each high-Q resonator and the high-frequency resonator can be tuned independently from zero to the strong-coupling regime via the external flux threading through the SQUID. In the circuit, the frequencies of the two high-Q resonators are far detuned from the high-frequency resonator. That is, quantum information stored in high-Q resonators cannot be populated in the high-frequency resonator, which lets the bus can be designed to link lots of high-Q resonators for the large-scale QIP. To show the circuit can be used to achieve the QIP, we present a high-fidelity scheme to generate Bell state on the two high-Q resonators. The scheme shows that, to achieve the entanglement operation on high-Q resonators, fast tuning on the coupling is no longer mandatory and the coupling strengths are not required to be turned on or off simultaneously.

New Journal of Physics•Jul 1, 2019•5 citations

Microstrip Superconducting Quantum Interference Devices for Quantum Information Science

De Feo, P Michael

Quantum-limited amplification in the microwave frequency range is of both practical and fundamental importance. The weak signals corresponding to single microwave photons require substantial amplification to resolve. When probing quantum excitations of the electromagnetic field, the substantial noise produced by standard amplifiers dominates the signal, therefore, several averages must be accumulated to achieve even a modest signal-to-noise ratio. Even worse, the back-action on the system due to amplifier noise can hasten the decay of the quantum state. In recent years, low-noise microwave-frequency amplification has been advancing rapidly and one field that would benefit greatly from this is circuit quantum electrodynamics (cQED). The development of circuit quantum electrodynamics---which implements techniques of quantum optics at microwave frequencies---has led to revolutionary progress in the field of quantum information science. cQED employs quantum bits (qubits) and superconducting microwave resonators in place of the atoms and cavities used in quantum optics permitting preparation and control of low energy photon states in macroscopic superconducting circuits at millikelvin temperatures. We have developed a microstrip superconducting quantum interference device (SQUID) amplifier (MSA) to provide the first stage of amplification for these systems. Employing sub-micron Josephson tunnel junctions for enhanced gain, these MSAs operate at microwave frequencies and are optimized to perform with near quantum-limited noise characteristics. Our MSA is utilized as the first stage of amplification to probe the dynamics of a SQUID oscillator. The SQUID oscillator is a flux-tunable microwave resonator formed by a capacitively shunted dc SQUID. Josephson plasma oscillations are induced by pulsed microwave excitations at the resonant frequency of the oscillator. Once pulsed, decaying plasma oscillations are observed in the time domain. By measuring with pulse amplitudes approaching the critical current of the SQUID, it is possible to probe the free evolution of a highly nonlinear oscillator.

•Jan 1, 2012•0 citations

Parametric Cavity Quantum Electrodynamics With Superconducting Circuits and Large Cavities

Adam J. Sirois

The research reported here details experimental progress toward future superconductor-based quantum computing technologies. Specifically, we present techniques for moving quantum information between various cavity resonators -- spatially as well as between frequencies. Rather than using traditional resonant coupling though, we induce non-resonant coupling through parametric frequency conversion. This technology is mediated by chip-based, micro-fabricated, Josephson Junction circuits.\nParametric processes have the advantage over traditional coupling by allowing the constituents of the system -- for example: cavity modes or qubits -- to remain fixed in frequency, tuned to their optimal operation frequency, thereby avoiding unwanted resonant interactions. As the number of constituents grows -- as quantum computing architectures expand to more and more bits -- these techniques will become necessary to optimize performance.\nOutside of the focus on quantum computation, these techniques have wide application for materials research, quantum optics, and extending traditionally optical-frequency experiments to microwave-frequencies. To that end, we demonstrate a hybrid quantum technology which expands the toolbox of superconducting quantum information to a new system, namely sapphire whispering gallery mode resonators. These resonators have been studied in the optical frequency domain, but here we demonstrate their usefulness at microwave frequencies.\nAll of the experiments in this dissertation should be considered proof-of-principle demonstrations of a future technology. Thus, we note when and where improvements for future devices will be necessary.

•Jan 1, 2016•0 citations
We propose a scheme for implementing quantum information transfer based on frequency modes of microwave photons in a superconducting circuit. In our proposal, quantum information can be encoded on frequency modes of microwave photons, which act as a qubit in the resonator. Operations for the qubit, which is a process involving parametric frequency conversion, can be implemented by adjusting biased-dc superconducting quantum interference (SQUID). The coupling between two resonators can be controlled by tuning the frequency of the LC circuit inserted by a dc SQUID with two Josephson-junctions (2JJ-SQUID). Compared with previous ones, our work can avoid dephasing and decoherence resulting from atom decay. In addition, the resonator which includes multiple photons in two frequency modes can play a role of an identical atomic ensemble, which could lead to photon blockade.
We propose a frequency-tunable source to emit entangled microwave photons on the platform of a superconducting circuit, in which two superconducting transmission-line resonators are coupled via a capacitor and one resonator is inserted with a superconducting quantum interference device (SQUID) in the center. By pumping the circuit appropriately with an external coherent microwave signal through the SQUID, microwave photons are emitted in pairs out of the circuit. The entanglement between the two modes is demonstrated by numerically calculating the second-order coherence function and the logarithmic negativity of the output microwave signals. Due to the tunability of SQUID’s equivalent inductance, the frequencies of the entangled microwave photons can be tuned by an external flux bias in situ. Our proposal paves a new way for obtaining entangled frequency-tunable two-mode microwave photons.
We control the transition frequency of a superconducting flux qubit coupled to a frequency-tunable resonator comprising a direct current superconducting quantum interference device (dc SQUID) by microwave driving. The dc SQUID mediates the coupling between microwave photons in the resonator and a flux qubit. The polarity of the frequency shift depends on the sign of the flux bias for the qubit and can be both positive and negative. The absolute value of the frequency shift becomes larger by increasing the photon number in the resonator. These behaviors are reproduced by a model considering the magnetic interaction between the flux qubit and dc SQUID. The tuning range of the transition frequency of the flux qubit reaches $\ensuremath{\approx}1.9\phantom{\rule{0.16em}{0ex}}\mathrm{GHz}$. The effect of photon number fluctuation in the resonator to the dephasing rate of the flux qubit is also discussed.
We study a superconducting circuit that can act as a toolbox to generate various Bogoliubov linear and nonlinear quantum operations on the microwave photon modes of superconducting resonators within one single circuit. The quantum operations are generated by exploring dispersive four-wave mixing (FWM) processes involving the resonator modes. Different FWM geometries can be realized by adjusting the circuit parameters and by applying appropriate microwave drivings. We illustrate this scheme using a circuit made of two superconducting qubits that couple with each other. Each qubit couples with one superconducting resonator. We also discuss main sources of quantum errors in this system and study the fidelity of the quantum operations by numerical simulation. Our scheme provides a practical approach to realize quantum information protocols on superconducting resonators.
Abstract We propose a superconducting circuit for quantum information processing (QIP) on high-quality (high-Q) superconducting resonators (SRs). In the circuit, two high-Q SRs are coupled to a high-frequency SR (acts as a quantum bus) assisted by superconducting quantum interference devices (SQUIDs) terminate in both ends of the high-frequency resonator. Each coupling strength between each high-Q resonator and the high-frequency resonator can be tuned independently from zero to the strong-coupling regime via the external flux threading through the SQUID. In the circuit, the frequencies of the two high-Q resonators are far detuned from the high-frequency resonator. That is, quantum information stored in high-Q resonators cannot be populated in the high-frequency resonator, which lets the bus can be designed to link lots of high-Q resonators for the large-scale QIP. To show the circuit can be used to achieve the QIP, we present a high-fidelity scheme to generate Bell state on the two high-Q resonators. The scheme shows that, to achieve the entanglement operation on high-Q resonators, fast tuning on the coupling is no longer mandatory and the coupling strengths are not required to be turned on or off simultaneously.
Quantum-limited amplification in the microwave frequency range is of both practical and fundamental importance. The weak signals corresponding to single microwave photons require substantial amplification to resolve. When probing quantum excitations of the electromagnetic field, the substantial noise produced by standard amplifiers dominates the signal, therefore, several averages must be accumulated to achieve even a modest signal-to-noise ratio. Even worse, the back-action on the system due to amplifier noise can hasten the decay of the quantum state. In recent years, low-noise microwave-frequency amplification has been advancing rapidly and one field that would benefit greatly from this is circuit quantum electrodynamics (cQED). The development of circuit quantum electrodynamics---which implements techniques of quantum optics at microwave frequencies---has led to revolutionary progress in the field of quantum information science. cQED employs quantum bits (qubits) and superconducting microwave resonators in place of the atoms and cavities used in quantum optics permitting preparation and control of low energy photon states in macroscopic superconducting circuits at millikelvin temperatures. We have developed a microstrip superconducting quantum interference device (SQUID) amplifier (MSA) to provide the first stage of amplification for these systems. Employing sub-micron Josephson tunnel junctions for enhanced gain, these MSAs operate at microwave frequencies and are optimized to perform with near quantum-limited noise characteristics. Our MSA is utilized as the first stage of amplification to probe the dynamics of a SQUID oscillator. The SQUID oscillator is a flux-tunable microwave resonator formed by a capacitively shunted dc SQUID. Josephson plasma oscillations are induced by pulsed microwave excitations at the resonant frequency of the oscillator. Once pulsed, decaying plasma oscillations are observed in the time domain. By measuring with pulse amplitudes approaching the critical current of the SQUID, it is possible to probe the free evolution of a highly nonlinear oscillator.
The research reported here details experimental progress toward future superconductor-based quantum computing technologies. Specifically, we present techniques for moving quantum information between various cavity resonators -- spatially as well as between frequencies. Rather than using traditional resonant coupling though, we induce non-resonant coupling through parametric frequency conversion. This technology is mediated by chip-based, micro-fabricated, Josephson Junction circuits.\nParametric processes have the advantage over traditional coupling by allowing the constituents of the system -- for example: cavity modes or qubits -- to remain fixed in frequency, tuned to their optimal operation frequency, thereby avoiding unwanted resonant interactions. As the number of constituents grows -- as quantum computing architectures expand to more and more bits -- these techniques will become necessary to optimize performance.\nOutside of the focus on quantum computation, these techniques have wide application for materials research, quantum optics, and extending traditionally optical-frequency experiments to microwave-frequencies. To that end, we demonstrate a hybrid quantum technology which expands the toolbox of superconducting quantum information to a new system, namely sapphire whispering gallery mode resonators. These resonators have been studied in the optical frequency domain, but here we demonstrate their usefulness at microwave frequencies.\nAll of the experiments in this dissertation should be considered proof-of-principle demonstrations of a future technology. Thus, we note when and where improvements for future devices will be necessary.