Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)

Realization of Bose-Einstein condensation in a rubidium vapor using a simple double magneto-optical trap

Yoshio Torii, Yoichi Suzuki, Mikio Kozuma, Takahiro Kuga

Published Jan 20, 2003• 0 citations
Publisher

Abstract

Since the first experimental demonstration of Bose-Einstein condensation (BEC) in an alkali-metal vapor, this subject has been attracting remarkable interests in the physics society. Hundreds of theoretical works concerning this subject have been reported so far. However, the number of reports about BEC experiments is much less than that of the theoretical works. This is because only a few experimental groups have succeeded in realizing BEC due to the experimental complexity and difficulties. The first step to create BEC in alkali-metal vapor is to collect a large number of atoms (/spl sim/-10/sup 9/) in an ultrahigh vacuum (/spl sim/10/sup 11/ torr). Recently, a double magneto-optical trap (MOT) system has been utilized for the first step. In this system, the atoms are first captured in a MOT from a vapor, and then transferred through a thin tube to the second MOT in an ultrahigh vacuum. To transfer the atoms, a pushing beam and a magnetic field are usually required to guide the atoms along the transfer tube. In the paper we report a simple double MOT system which uses neither a push beam nor a magnetic field to transfer the atoms. The atoms are transferred just by gravity. We can collect up to 2 x 10/sup 9/ rubidium atoms in the ultrahigh-vacuum MOT with this system and can achieve the BEC.

DOI
10.1109/cleopr.1999.817743

Related papers

Atomic transfer between two magneto-optical traps

María Martínez Valado, Alicia V. Carpentier, Humberto Michinel +3 more

We design an experiment to obtain a Bose-Einstein Condensate (BEC) using 87Rb atoms. Taking advantage of this setup, we develop a simple and efficient method to transfer atoms from a first Magneto- Optical-Trap(MOT) to a second one. Our system consists of two glass vacuum cells horizontally connected with a MOT aligned at the center of each cell. Once rubidium atoms are loaded into the first MOT, the pushig beam forces them to move forward to the second MOT. We use a near-resonant weak laser beam to make the atoms reach the second cell. MOT1 and MOT2 both run in retroreflected-three beam MOT configuration.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 21, 2011•1 citation

A double magneto-optical trap system using a slow atomic beam for atom transfer

Shuyu Zhou, Zhen Xu, Zhou Shan-Yu +2 more

A rubidium double magneto-optical trap(MOT) system for Bose-Einstein condensation experiments has been set up. A slow atomic beam has been obtained with a low-velocity intense source (LVIS) and used to transfer atoms into an ultra-high-vacuum (UHV) MOT. By maintaining a pressure difference of 3 orders between LVIS-MOT and UHV-MOT, a lowest pressure of 1×10-9Pa can be achieved in UHV-MOT. The flux of the slow atomic beam is 1×109/s. About 4×108 87Rb atoms can be loaded into UHV-MOT. In this paper, maximum number of atoms captured in MOTs under two typical conditions have also been discussed.

Acta Physica Sinica•Jan 1, 2007•4 citations

Laser cooling of Rubidium atoms

Chung, Stephen

This thesis focuses on the construction of an atom trapping system utilising a hybrid trap setup to create a Bose-Einstein Condensate. The system involves a three chamber system, consisting of two magneto-optical traps for initial atom trapping and a science chamber to create and observe a BEC. The alkali metal of choice used in this experiment is ⁸⁷Rb, as it possesses favourable properties to create a BEC. A combination of Zeeman modulation frequency stabilisation and polarisation spectroscopy is used to lock our external-cavity diode laser into the right transition frequency and a tiny open-hardware called a Beaglebone is used to remotely access these controls. Beaglebones are also utilised for a double pass configuration of acousto-optic modulators for their convenient remote access which ultimately becomes the primary parameter for troubleshooting the optical part of the experiment. A standard push beam, with a much lower intensity compared to the MOT beams, is pulsed to transport the atoms from the first MOT chamber to the second MOT chamber. By moving the atom cloud to a much lower atmosphere (≈ 10⁻¹¹Torr), we are able to create a bigger atom cloud with a lower temperature which is essential in creating a BEC.

•Jan 1, 2020•0 citations

The design and construction of a Bose-Einstein condensation apparatus

A. M. Jofre

This work describes the design and construction of the Bose-Einstein condensation (BEC) apparatus at the University of Toronto. The aim of the experiment is to create a Bose-Einstein condensate out of a vapour cloud of 87Rb atoms using a combination of laser cooling, magnetic trapping and evaporative cooling. The design and construction of all of the constituent parts necessary for the realization of these techniques are described in this work. The apparatus consists of two magneto-optical traps (MOTs, whereby the atoms are collected from a background vapour into the first MOT, and then transferred into the second MOT, which is in a region of ultra-high vacuum (

•Jan 1, 2004•2 citations

Laser Cooling and Bose-Einstein Condensation. Experimental Techniques for Bose-Einstein Condensation of Rubidium Atoms.

Yoshio Torii

Experimental techniques to produce and observe a Bose-Einstein condensate of rubidium atoms are presented. The atoms are first optically cooled and trapped in an ultra-high vacuum (-10-11 torr) glass cell using a double magneto-optical trap, and then transferred to a “cloverleaf” magnetic trap. Rf-induced evaporation is performed to further cool the magnetically trapped atoms below the phase transition of Bose-Einstein condensation. The velocity distribution (inferred by absorption imaging) of the cooled atomic cloud clearly shows the expected bi-modal structure characteristic of a condensate

The Review of Laser Engineering•Jan 1, 2000•1 citation

High-performance experimental apparatus for large atom number 87Rb Bose-Einstein condensates

Jiho Noh, Sung Jong Park, Chang Yong Park +3 more

We describe our high-performance experimental apparatus for producing large atom number 87Rb Bose-Einstein condensates by using a double magneto-optical trap (MOT) system that consists of a two-dimensional MOT (2D MOT) and a three-dimensional MOT (3D MOT). As an atomic beam source for loading the 3D MOT, we use a unique 2D MOT system with two-color pushing beams, which increase the loading rate and the total number of atoms in the 3D MOT, compared to a pure 2D MOT by a factor of 20. After MOT compression and polarization gradient cooling, atoms are optically pumped into a magnetically trappable hyperfine state |F = 1, m F = −1〉 to be loaded into a quadrupole-Ioffe-configuration (QUIC) trap. We enhance this optical pumping process by up to 300% by using two laser beams. After rf evaporative cooling, a Bose-Einstein condensate (BEC) with more than 2 × 107 atoms is achieved.

Journal of the Korean Physical Society•Oct 1, 2012•4 citations
Since the first experimental demonstration of Bose-Einstein condensation (BEC) in an alkali-metal vapor, this subject has been attracting remarkable interests in the physics society. Hundreds of theoretical works concerning this subject have been reported so far. However, the number of reports about BEC experiments is much less than that of the theoretical works. This is because only a few experimental groups have succeeded in realizing BEC due to the experimental complexity and difficulties. The first step to create BEC in alkali-metal vapor is to collect a large number of atoms (/spl sim/-10/sup 9/) in an ultrahigh vacuum (/spl sim/10/sup 11/ torr). Recently, a double magneto-optical trap (MOT) system has been utilized for the first step. In this system, the atoms are first captured in a MOT from a vapor, and then transferred through a thin tube to the second MOT in an ultrahigh vacuum. To transfer the atoms, a pushing beam and a magnetic field are usually required to guide the atoms along the transfer tube. In the paper we report a simple double MOT system which uses neither a push beam nor a magnetic field to transfer the atoms. The atoms are transferred just by gravity. We can collect up to 2 x 10/sup 9/ rubidium atoms in the ultrahigh-vacuum MOT with this system and can achieve the BEC.
We design an experiment to obtain a Bose-Einstein Condensate (BEC) using 87Rb atoms. Taking advantage of this setup, we develop a simple and efficient method to transfer atoms from a first Magneto- Optical-Trap(MOT) to a second one. Our system consists of two glass vacuum cells horizontally connected with a MOT aligned at the center of each cell. Once rubidium atoms are loaded into the first MOT, the pushig beam forces them to move forward to the second MOT. We use a near-resonant weak laser beam to make the atoms reach the second cell. MOT1 and MOT2 both run in retroreflected-three beam MOT configuration.
A rubidium double magneto-optical trap(MOT) system for Bose-Einstein condensation experiments has been set up. A slow atomic beam has been obtained with a low-velocity intense source (LVIS) and used to transfer atoms into an ultra-high-vacuum (UHV) MOT. By maintaining a pressure difference of 3 orders between LVIS-MOT and UHV-MOT, a lowest pressure of 1×10-9Pa can be achieved in UHV-MOT. The flux of the slow atomic beam is 1×109/s. About 4×108 87Rb atoms can be loaded into UHV-MOT. In this paper, maximum number of atoms captured in MOTs under two typical conditions have also been discussed.
This thesis focuses on the construction of an atom trapping system utilising a hybrid trap setup to create a Bose-Einstein Condensate. The system involves a three chamber system, consisting of two magneto-optical traps for initial atom trapping and a science chamber to create and observe a BEC. The alkali metal of choice used in this experiment is ⁸⁷Rb, as it possesses favourable properties to create a BEC. A combination of Zeeman modulation frequency stabilisation and polarisation spectroscopy is used to lock our external-cavity diode laser into the right transition frequency and a tiny open-hardware called a Beaglebone is used to remotely access these controls. Beaglebones are also utilised for a double pass configuration of acousto-optic modulators for their convenient remote access which ultimately becomes the primary parameter for troubleshooting the optical part of the experiment. A standard push beam, with a much lower intensity compared to the MOT beams, is pulsed to transport the atoms from the first MOT chamber to the second MOT chamber. By moving the atom cloud to a much lower atmosphere (≈ 10⁻¹¹Torr), we are able to create a bigger atom cloud with a lower temperature which is essential in creating a BEC.
This work describes the design and construction of the Bose-Einstein condensation (BEC) apparatus at the University of Toronto. The aim of the experiment is to create a Bose-Einstein condensate out of a vapour cloud of 87Rb atoms using a combination of laser cooling, magnetic trapping and evaporative cooling. The design and construction of all of the constituent parts necessary for the realization of these techniques are described in this work. The apparatus consists of two magneto-optical traps (MOTs, whereby the atoms are collected from a background vapour into the first MOT, and then transferred into the second MOT, which is in a region of ultra-high vacuum (
Experimental techniques to produce and observe a Bose-Einstein condensate of rubidium atoms are presented. The atoms are first optically cooled and trapped in an ultra-high vacuum (-10-11 torr) glass cell using a double magneto-optical trap, and then transferred to a “cloverleaf” magnetic trap. Rf-induced evaporation is performed to further cool the magnetically trapped atoms below the phase transition of Bose-Einstein condensation. The velocity distribution (inferred by absorption imaging) of the cooled atomic cloud clearly shows the expected bi-modal structure characteristic of a condensate
We describe our high-performance experimental apparatus for producing large atom number 87Rb Bose-Einstein condensates by using a double magneto-optical trap (MOT) system that consists of a two-dimensional MOT (2D MOT) and a three-dimensional MOT (3D MOT). As an atomic beam source for loading the 3D MOT, we use a unique 2D MOT system with two-color pushing beams, which increase the loading rate and the total number of atoms in the 3D MOT, compared to a pure 2D MOT by a factor of 20. After MOT compression and polarization gradient cooling, atoms are optically pumped into a magnetically trappable hyperfine state |F = 1, m F = −1〉 to be loaded into a quadrupole-Ioffe-configuration (QUIC) trap. We enhance this optical pumping process by up to 300% by using two laser beams. After rf evaporative cooling, a Bose-Einstein condensate (BEC) with more than 2 × 107 atoms is achieved.