Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Laser cooling of Rubidium atoms

Chung, Stephen

Published Jan 1, 2020• 0 citations
OpenAlex

Abstract

This thesis focuses on the construction of an atom trapping system utilising a hybrid trap setup to create a Bose-Einstein Condensate. The system involves a three chamber system, consisting of two magneto-optical traps for initial atom trapping and a science chamber to create and observe a BEC. The alkali metal of choice used in this experiment is ⁸⁷Rb, as it possesses favourable properties to create a BEC. A combination of Zeeman modulation frequency stabilisation and polarisation spectroscopy is used to lock our external-cavity diode laser into the right transition frequency and a tiny open-hardware called a Beaglebone is used to remotely access these controls. Beaglebones are also utilised for a double pass configuration of acousto-optic modulators for their convenient remote access which ultimately becomes the primary parameter for troubleshooting the optical part of the experiment. A standard push beam, with a much lower intensity compared to the MOT beams, is pulsed to transport the atoms from the first MOT chamber to the second MOT chamber. By moving the atom cloud to a much lower atmosphere (≈ 10⁻¹¹Torr), we are able to create a bigger atom cloud with a lower temperature which is essential in creating a BEC.

Related papers

Rubidium 87 Bose Einstein condensate in a driven 1D optical lattice

Raffaele Nolli

The long term aim of the work is to study non-equilibrium and symmetry-breaking phenomena for a Bose-Einstein condensate in time-dependent optical traps. The work presented in this thesis is mostly devoted to the design, construction and testing of the apparatus, in which condensation was successfully achieved. The first part of this thesis describes the design and construction of a hybrid setup for the production of a Bose-Einstein condensate (BEC) of 87 Rb in the |F = 2, m F = +2 > state. The vacuum system is composed of a first chamber, where a low-velocity intense source (LVIS) of atoms is produced to provide a pre-cooled atomic beam to the science chamber, where the magneto-optical trap (MOT) is produced, trapping more than 3 x 10 8 atoms at a temperature of roughly 400 μK. Forced radio- frequency evaporation is performed in a quadrupole magnetic trap and the atoms are transferred to a hybrid far-detuned optical trap in a crossed-beams configuration; evaporation in the optical potential leads to reliable production of a BEC every 50 s, composed of 10^5 atoms at a temperature of 10-30 nK. To ensure fine control on the optical potential depth and high intensity and pointing stability, a stabilisation system has been developed and characterised. The second part of this thesis describes the realisation of a 1D optical lattice, produced by two phase-locked laser beams emitting at 780 nm, with a red detuning of approximately 3.5 GHz, in counter-propagating configuration. Oscillating forces obtained by phase-modulating the optical potential are applied.

•Jun 29, 2018•0 citations

Portable and versatile cold atom experiments

Ireland, Philip

This thesis describes the progress achieved towards two goals. One is the construction of a compact magneto-optical trap (MOT) apparatus, used both as a standalone undergraduate laboratory experiment and as part of a public engagement demonstration of cold atom physics. The setup, which utilises a dichroic atomic vapour laser lock (DAVLL) system plus homemade sideband generation electronics, is capable of trapping and cooling up to 8x10⁷ ⁸⁵Rb atoms in a standard six-beam laser cooling scheme. The second goal is the loading of an ultracold ensemble of ⁸⁷Rb atoms into novel optical trap geometries using a phase-only liquid crystal spatial light modulator (LC SLM) for applications to atomtronics and quantum simulation. Details of a double vacuum chamber apparatus, designed to produce the first Bose-Einstein condensates (BECs) at St Andrews, are provided. The setup incorporates a hybrid trap evaporative cooling scheme towards quantum degeneracy and reliably produces BECs of 1.9 10⁵ ⁸⁷Rb atoms. Two computational techniques, developed during the course of this project, are presented with the aim of creating flexible, smooth holographic optical traps. The first method illuminates a single SLM with overlapped, co-propagating light beams of different wavelengths to create a composite optical pattern for atom manipulation. The second uses conjugate gradient minimisation to create exceptionally high fidelity light patterns in both amplitude and phase for light in the output plane. These techniques, combined with the implementation of a light sheet into the experimental setup, are used to trap atoms in both a ring profile and in a set of narrow waveguides connected with a tunnelling barrier.

•Jun 24, 2019•1 citation

Design, construction, and performance towards a versatile 87Rb and 41K BEC apparatus

Nicholas McKay Parry

The possibility to mould and control pure quantum systems has been offered by the experimental observation of Bose-Einstein condensation, a unique phase of matter when macroscopic quantities of a gas occupy the lowest quantum state. Techniques for creating these degenerate gases vary from laboratory to laboratory; each offers an unique test bed for studying quantum physics on a macroscopic scale. This thesis reports on the experimental design, construction and performance of an apparatus to create two-component 87Rb and 41K condensates for studies of non-equilibrium dynamics. This thesis is broken down as follows. In Chapter 1, a brief overview of the history and status of Bose Einstein condensates is presented, to affirm the motivation behind our work. Chapter 2 then presents the fundamental theory and background information to understand how and why our experiment was built. Chapter 3 describes the bulk of the work undertaken at the beginning of this thesis. In particular it describes the design choices, construction and performance of the vacuum, and laser and magnetic coil systems that are the key structural elements of the apparatus. In particular the vacuum system is a two-component differentially pumped system designed to optimise the number and lifetime of trapped atoms. Another integral element of the vacuum chamber is the science cell that enables high optical access, and close physical, access to an atomic cloud. As a result, high resolution imaging, ≃ 980 nm resolution at 780 nm is expected with a commercial microscope objective lens. The laser system is carefully de- signed to best combine and deliver the seven different optical frequencies required to simultaneously trap and manipulate 87Rb and 41K atoms. The magnetic coil system also represents an integral component of the apparatus, responsible for trapping and transferring atoms in a quadrupole field. One pair of coils is able to have their current direction reversed in order to generate bias fields. This allows access to Feshbach resonances between the two species, once they have been condensed. The second part of this thesis, Chapter 4, describes the performance of the apparatus when used to simultaneously trap 41K and 87Rb in the 3D magneto- optical trap (MOT) and produce a condensate of 87Rb atoms. In particular 1 × 109 rubidium atoms are routinely trapped in the 3D-MOT and transferred to the science chamber. In the hybrid trap the atoms are evaporatively cooled via microwave radiation, later to be used to sympathetically cool 41K, and loaded into a hybrid optical dipole and magnetic trap. At this stage ≃ 5 × 106 atoms are evaporatively cooled, by lowering the trap depth of the optical dipole beam, until a condensate of 87Rb is formed, containing 1.5 × 105 atoms. Additionally we are able to produce 3D MOTs of 41K simultaneously with the 87Rb 3D MOTs.

•Aug 16, 2016•1 citation

Magnetic transport and Bose-Einstein condensation of rubidium atoms

Benjamin Thomas Sheard, Sheard, Benjamin

This thesis describes the design, construction and optimisation of a new apparatus to produce Bose-Einstein condensates (BECs) of 87Rb atoms. The main aim in building this system was to include a high resolution imaging system capable of resolving single atoms. Optical access for the imaging system was created by including a stage of atom transport in which the atoms are magnetically transferred ~50 cm from a magneto-optical trap (MOT), where they are initially collected, to a glass science cell where experiments are carried out and imaging takes place. Two magnetic transport schemes have been demonstrated, based on approaches first used in other laboratories. First, a scheme in which the atoms are transferred in a moving pair of magnetic trapping coils. Second, a hybrid scheme where the atoms are translated part of the distance in the moving coils, and the rest of the way by switching the current in a chain of fixed coils. This second scheme was designed to allow optical access for a high numerical aperture microscope objective to be placed immediately next to the science cell for high resolution imaging.The atoms were first collected in a large pyramid MOT which can be loaded with 3 × 10^9 atoms in a time of 20 s. Around half of these atoms – those in the |F = 1, mF = −1> magnetic substate – were then magnetically trapped prior to transport. The typical fraction of the trapped atoms transferred to the science cell was ~30% and ~18% for the moving coils and hybrid schemes respectively.Evaporative cooling was carried out on the atom cloud following transport with the moving coils and loading into a time-orbiting potential trap. The optimised cooling sequence lasted for 28 s and consistently produced a pure condensate with 5 × 10^5 atoms. A BEC has also been produced by evaporative cooling following hybrid transport. The next experimental steps will be to optimise the hybrid transfer approach further and install the high resolution imaging system.The system is well-placed to continue an ongoing series of experiments in which ultracold atoms are trapped in RF-dressed potentials. These potentials will be used to study low-dimensional quantum gases as well as in experiments where small atom number BECs are rapidly rotated to enter the fractional quantum Hall regime.

•Jan 1, 2010•1 citation

The design and construction of a Bose-Einstein condensation apparatus

A. M. Jofre

This work describes the design and construction of the Bose-Einstein condensation (BEC) apparatus at the University of Toronto. The aim of the experiment is to create a Bose-Einstein condensate out of a vapour cloud of 87Rb atoms using a combination of laser cooling, magnetic trapping and evaporative cooling. The design and construction of all of the constituent parts necessary for the realization of these techniques are described in this work. The apparatus consists of two magneto-optical traps (MOTs, whereby the atoms are collected from a background vapour into the first MOT, and then transferred into the second MOT, which is in a region of ultra-high vacuum (

•Jan 1, 2004•2 citations

A compact system for ultracold atoms

Lara Torralbo-Campo

This thesis describes the design, construction and optimisation of two compact \nsetups to produce ⁸⁷Rb Bose-Einstein condensates and dual ⁷Li-⁸⁷Rb Magneto-Optical Traps (MOTs). The motivation for compact systems is to have simplified \nsystems to cool the atoms. The first experimental setup is based on a single pyrex \nglass cell without the need for atom chips. Fast evaporation will be achieved in a hybrid trap comprising of a magnetic quadrupole trap and an optical dipole trap \ncreated by a Nd:YVO4 laser and with future plans of using a Spatial Light Modulator \n(SLM). To enhance an efficient and rapid evaporation, we have investigated Light-Induced Atomic Desorption (LIAD) to modulate the Rb partial pressure during the cooling and trapping stage. With this technique, a ⁸⁷Rb MOT of 7 x 10⁷ atoms was loaded by shining violet light from a LED source into the glass cell, whose walls are coated with rubidium atoms. The atoms were then cooled by optical molasses and then loaded into a magnetic trap where lifetime measurements demonstrated that LIAD improves on magnetically-trapped atoms loaded from constant background pressure by a factor of six. This is quite encouraging and opens the possibility to do a rapid evaporation. In a second experiment, we have designed a compact system based on a stainless steel chamber to trap either ⁷Li or ⁶Li atoms in a MOT loaded from alkali-metal dispensers without the need of conventional oven-Zeeman slower. This setup can also load ⁸⁷Rb atoms, allowing future projects to simultaneously produce degenerate quantum gases of bosonic ⁸⁷Rb and fermionic ⁶Li atoms.

•Nov 30, 2012•0 citations
This thesis focuses on the construction of an atom trapping system utilising a hybrid trap setup to create a Bose-Einstein Condensate. The system involves a three chamber system, consisting of two magneto-optical traps for initial atom trapping and a science chamber to create and observe a BEC. The alkali metal of choice used in this experiment is ⁸⁷Rb, as it possesses favourable properties to create a BEC. A combination of Zeeman modulation frequency stabilisation and polarisation spectroscopy is used to lock our external-cavity diode laser into the right transition frequency and a tiny open-hardware called a Beaglebone is used to remotely access these controls. Beaglebones are also utilised for a double pass configuration of acousto-optic modulators for their convenient remote access which ultimately becomes the primary parameter for troubleshooting the optical part of the experiment. A standard push beam, with a much lower intensity compared to the MOT beams, is pulsed to transport the atoms from the first MOT chamber to the second MOT chamber. By moving the atom cloud to a much lower atmosphere (≈ 10⁻¹¹Torr), we are able to create a bigger atom cloud with a lower temperature which is essential in creating a BEC.
The long term aim of the work is to study non-equilibrium and symmetry-breaking phenomena for a Bose-Einstein condensate in time-dependent optical traps. The work presented in this thesis is mostly devoted to the design, construction and testing of the apparatus, in which condensation was successfully achieved. The first part of this thesis describes the design and construction of a hybrid setup for the production of a Bose-Einstein condensate (BEC) of 87 Rb in the |F = 2, m F = +2 > state. The vacuum system is composed of a first chamber, where a low-velocity intense source (LVIS) of atoms is produced to provide a pre-cooled atomic beam to the science chamber, where the magneto-optical trap (MOT) is produced, trapping more than 3 x 10 8 atoms at a temperature of roughly 400 μK. Forced radio- frequency evaporation is performed in a quadrupole magnetic trap and the atoms are transferred to a hybrid far-detuned optical trap in a crossed-beams configuration; evaporation in the optical potential leads to reliable production of a BEC every 50 s, composed of 10^5 atoms at a temperature of 10-30 nK. To ensure fine control on the optical potential depth and high intensity and pointing stability, a stabilisation system has been developed and characterised. The second part of this thesis describes the realisation of a 1D optical lattice, produced by two phase-locked laser beams emitting at 780 nm, with a red detuning of approximately 3.5 GHz, in counter-propagating configuration. Oscillating forces obtained by phase-modulating the optical potential are applied.
This thesis describes the progress achieved towards two goals. One is the construction of a compact magneto-optical trap (MOT) apparatus, used both as a standalone undergraduate laboratory experiment and as part of a public engagement demonstration of cold atom physics. The setup, which utilises a dichroic atomic vapour laser lock (DAVLL) system plus homemade sideband generation electronics, is capable of trapping and cooling up to 8x10⁷ ⁸⁵Rb atoms in a standard six-beam laser cooling scheme. The second goal is the loading of an ultracold ensemble of ⁸⁷Rb atoms into novel optical trap geometries using a phase-only liquid crystal spatial light modulator (LC SLM) for applications to atomtronics and quantum simulation. Details of a double vacuum chamber apparatus, designed to produce the first Bose-Einstein condensates (BECs) at St Andrews, are provided. The setup incorporates a hybrid trap evaporative cooling scheme towards quantum degeneracy and reliably produces BECs of 1.9 10⁵ ⁸⁷Rb atoms. Two computational techniques, developed during the course of this project, are presented with the aim of creating flexible, smooth holographic optical traps. The first method illuminates a single SLM with overlapped, co-propagating light beams of different wavelengths to create a composite optical pattern for atom manipulation. The second uses conjugate gradient minimisation to create exceptionally high fidelity light patterns in both amplitude and phase for light in the output plane. These techniques, combined with the implementation of a light sheet into the experimental setup, are used to trap atoms in both a ring profile and in a set of narrow waveguides connected with a tunnelling barrier.
The possibility to mould and control pure quantum systems has been offered by the experimental observation of Bose-Einstein condensation, a unique phase of matter when macroscopic quantities of a gas occupy the lowest quantum state. Techniques for creating these degenerate gases vary from laboratory to laboratory; each offers an unique test bed for studying quantum physics on a macroscopic scale. This thesis reports on the experimental design, construction and performance of an apparatus to create two-component 87Rb and 41K condensates for studies of non-equilibrium dynamics. This thesis is broken down as follows. In Chapter 1, a brief overview of the history and status of Bose Einstein condensates is presented, to affirm the motivation behind our work. Chapter 2 then presents the fundamental theory and background information to understand how and why our experiment was built. Chapter 3 describes the bulk of the work undertaken at the beginning of this thesis. In particular it describes the design choices, construction and performance of the vacuum, and laser and magnetic coil systems that are the key structural elements of the apparatus. In particular the vacuum system is a two-component differentially pumped system designed to optimise the number and lifetime of trapped atoms. Another integral element of the vacuum chamber is the science cell that enables high optical access, and close physical, access to an atomic cloud. As a result, high resolution imaging, ≃ 980 nm resolution at 780 nm is expected with a commercial microscope objective lens. The laser system is carefully de- signed to best combine and deliver the seven different optical frequencies required to simultaneously trap and manipulate 87Rb and 41K atoms. The magnetic coil system also represents an integral component of the apparatus, responsible for trapping and transferring atoms in a quadrupole field. One pair of coils is able to have their current direction reversed in order to generate bias fields. This allows access to Feshbach resonances between the two species, once they have been condensed. The second part of this thesis, Chapter 4, describes the performance of the apparatus when used to simultaneously trap 41K and 87Rb in the 3D magneto- optical trap (MOT) and produce a condensate of 87Rb atoms. In particular 1 × 109 rubidium atoms are routinely trapped in the 3D-MOT and transferred to the science chamber. In the hybrid trap the atoms are evaporatively cooled via microwave radiation, later to be used to sympathetically cool 41K, and loaded into a hybrid optical dipole and magnetic trap. At this stage ≃ 5 × 106 atoms are evaporatively cooled, by lowering the trap depth of the optical dipole beam, until a condensate of 87Rb is formed, containing 1.5 × 105 atoms. Additionally we are able to produce 3D MOTs of 41K simultaneously with the 87Rb 3D MOTs.
This thesis describes the design, construction and optimisation of a new apparatus to produce Bose-Einstein condensates (BECs) of 87Rb atoms. The main aim in building this system was to include a high resolution imaging system capable of resolving single atoms. Optical access for the imaging system was created by including a stage of atom transport in which the atoms are magnetically transferred ~50 cm from a magneto-optical trap (MOT), where they are initially collected, to a glass science cell where experiments are carried out and imaging takes place. Two magnetic transport schemes have been demonstrated, based on approaches first used in other laboratories. First, a scheme in which the atoms are transferred in a moving pair of magnetic trapping coils. Second, a hybrid scheme where the atoms are translated part of the distance in the moving coils, and the rest of the way by switching the current in a chain of fixed coils. This second scheme was designed to allow optical access for a high numerical aperture microscope objective to be placed immediately next to the science cell for high resolution imaging.The atoms were first collected in a large pyramid MOT which can be loaded with 3 × 10^9 atoms in a time of 20 s. Around half of these atoms – those in the |F = 1, mF = −1> magnetic substate – were then magnetically trapped prior to transport. The typical fraction of the trapped atoms transferred to the science cell was ~30% and ~18% for the moving coils and hybrid schemes respectively.Evaporative cooling was carried out on the atom cloud following transport with the moving coils and loading into a time-orbiting potential trap. The optimised cooling sequence lasted for 28 s and consistently produced a pure condensate with 5 × 10^5 atoms. A BEC has also been produced by evaporative cooling following hybrid transport. The next experimental steps will be to optimise the hybrid transfer approach further and install the high resolution imaging system.The system is well-placed to continue an ongoing series of experiments in which ultracold atoms are trapped in RF-dressed potentials. These potentials will be used to study low-dimensional quantum gases as well as in experiments where small atom number BECs are rapidly rotated to enter the fractional quantum Hall regime.
This work describes the design and construction of the Bose-Einstein condensation (BEC) apparatus at the University of Toronto. The aim of the experiment is to create a Bose-Einstein condensate out of a vapour cloud of 87Rb atoms using a combination of laser cooling, magnetic trapping and evaporative cooling. The design and construction of all of the constituent parts necessary for the realization of these techniques are described in this work. The apparatus consists of two magneto-optical traps (MOTs, whereby the atoms are collected from a background vapour into the first MOT, and then transferred into the second MOT, which is in a region of ultra-high vacuum (
This thesis describes the design, construction and optimisation of two compact \nsetups to produce ⁸⁷Rb Bose-Einstein condensates and dual ⁷Li-⁸⁷Rb Magneto-Optical Traps (MOTs). The motivation for compact systems is to have simplified \nsystems to cool the atoms. The first experimental setup is based on a single pyrex \nglass cell without the need for atom chips. Fast evaporation will be achieved in a hybrid trap comprising of a magnetic quadrupole trap and an optical dipole trap \ncreated by a Nd:YVO4 laser and with future plans of using a Spatial Light Modulator \n(SLM). To enhance an efficient and rapid evaporation, we have investigated Light-Induced Atomic Desorption (LIAD) to modulate the Rb partial pressure during the cooling and trapping stage. With this technique, a ⁸⁷Rb MOT of 7 x 10⁷ atoms was loaded by shining violet light from a LED source into the glass cell, whose walls are coated with rubidium atoms. The atoms were then cooled by optical molasses and then loaded into a magnetic trap where lifetime measurements demonstrated that LIAD improves on magnetically-trapped atoms loaded from constant background pressure by a factor of six. This is quite encouraging and opens the possibility to do a rapid evaporation. In a second experiment, we have designed a compact system based on a stainless steel chamber to trap either ⁷Li or ⁶Li atoms in a MOT loaded from alkali-metal dispensers without the need of conventional oven-Zeeman slower. This setup can also load ⁸⁷Rb atoms, allowing future projects to simultaneously produce degenerate quantum gases of bosonic ⁸⁷Rb and fermionic ⁶Li atoms.