Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.16435

Circuit-Level Analysis of Quantum Error Correction in Second-Generation Quantum Repeaters

Suraj Vishwanath, Jonas Hawellek, Roberto Ferrara, Christian Deppe

Published Nov 12, 2026• 0 citations
arXivHTMLPDF

Abstract

We present a circuit-level simulation of second-generation quantum repeaters with stabilizer-based quantum error correction. We model a two-segment repeater link including encoding, syndrome extraction, decoding, and entanglement swapping, and compare the performance of the single-error-correcting Steane and five-qubit stabilizer codes under different noise scenarios. To that extent, we consider noise sources with incoherent (depolarizing and dephasing) and coherent (systematic over-rotation) errors and incorporate them directly at the circuit level. While the Steane code outperforms the five-qubit code at coherent errors, the five-qubit code achieves higher end-to-end fidelities under incoherent noise in the low-noise regime when a large number of physical qubits is affected by it. At higher noise regimes, employing no code turns out to be the best option. In mixed noise scenarios, we observe moderate cross-effects between the noise classes regarding the error correction performance. We conclude that code selection in second-generation quantum repeaters must be adapted to the dominant physical noise mechanism and that circuit complexity and hardware-aware implementation options influence performance in coherent-error-dominated regimes, providing design insights for error correction in quantum repeaters.

DOI
10.48550/arxiv.2611.16435

Related papers

Memory-corrected quantum repeaters with adaptive syndrome identification

Alena Romanova, Peter van Loock

We address the challenge of incorporating encoded quantum memories into an exact secret key rate analysis for small and intermediate-scale quantum repeaters. To this end, we introduce the check matrix model and quantify the resilience of stabilizer codes of up to eleven qubits against Pauli noise, obtaining analytical expressions for effective logical error probabilities. Generally, we find that the five-qubit and Steane codes either outperform more complex, larger codes in the experimentally relevant parameter regimes or have a lower resource overhead. Subsequently, we apply our results to calculate lower bounds on the asymptotic secret key rate in memory-corrected quantum repeaters when using the five-qubit or Steane codes on the memory qubits. The five-qubit code drastically increases the effective memory coherence time, reducing a phase flip probability of 1 % to 0.001 % when employing an error syndrome identification adapted to the quantum noise channel. Furthermore, it mitigates the impact of faulty Bell state measurements and imperfect state preparation, lowering the minimally required depolarization parameter for nonzero secret key rates in an eight-segment repeater from 98.4 % to 96.4 % . As a result, the memory-corrected quantum repeater can often generate secret keys in experimental parameter regimes where the unencoded repeater fails to produce a secret key. In an eight-segment repeater, one can even achieve nonvanishing secret key rates up to distances of 2000 km for memory coherence times of t c = 10 s or less using multiplexing. Assuming a zero-distance link-coupling efficiency p 0 = 0.7 , a depolarization parameter μ = 0.99 , t c = 10 s, and an 800 km total repeater length, we obtain a secret key rate of 4.85 Hz, beating both the unencoded repeater that provides 1.25 Hz and ideal twin-field quantum key distribution with 0.71 Hz at GHz clock rates.

arXiv:2405.07258•Physical Review Research•Jan 30, 2025•2 citations

Performance of quantum error correction with coherent errors

Eric Huang, Andrew C. Doherty, Steven T. Flammia

We compare the performance of quantum error correcting codes when memory errors are unitary with the more familiar case of dephasing noise. For a wide range of codes, we analytically compute the effective logical channel that results when the error correction steps are performed noiselessly. Our examples include the entire family of repetition codes, the five-qubit, Steane, Shor, and surface codes. When errors are measured in terms of the diamond norm, we find that the error correction is typically much more effective for unitary errors than for dephasing. We observe this behavior for a wide range of codes after a single level of encoding, and in the thresholds of concatenated codes using hard decoders. We show that this holds with great generality by proving a bound on the performance of any stabilizer code when the noise at the physical level is unitary. By comparing the diamond norm error ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}$ of the logical qubit with the same quantity at the physical level ${D}_{\ensuremath{\diamond}}$, we show that ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}\ensuremath{\le}c{D}_{\ensuremath{\diamond}}^{d}$ where $d$ is the distance of the code and $c$ is a constant that depends on the code but not on the error. This bound compares very favorably to the performance of error correction for dephasing noise and other Pauli channels, where an error correcting code of odd distance $d$ will exhibit a scaling ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}\ensuremath{\sim}{D}_{\ensuremath{\diamond}}^{(d+1)/2}$.

arXiv:1805.08227•Physical Review A•Feb 12, 2019•88 citations

Scalable entanglement distribution using encoded hybrid repeater chains

Stav Haldar, Saikat Guha, Don Towsley +1 more

Long-distance entanglement distribution requires error correction protocols to compensate for qubit decoherence in quantum memories and noise introduced during entanglement swapping. We argue that repeater chains with error-correction capabilities should exploit more than one physical platform, combining the complementary strengths of different quantum memory technologies into a single hybrid repeater architecture. An important constituent of such an architecture is a hybrid repeater which combines type-1 memories, characterized by fast entanglement generation rates and suitability for multiplexing, and type-2 memories that offer long coherence times and low two-qubit gate error rates. Taking the resource-intensive nature of hybrid nodes into account, we propose and analyze repeater chains in which only a subset of nodes need to be hybrid, while the remaining nodes are simpler first-generation repeaters with no error-correction capability. Through detailed Monte Carlo simulations of fault-tolerant encoded repeater chain protocols based on the three-qubit phase-flip repetition code, the $[[7,1,3]]$ Steane code, and the $[[9,1,3]]$ Shor code, we demonstrate that these hybrid architectures outperform pure architectures based on a single memory platform in terms of end-to-end entanglement distribution rate. In our study we develop a full circuit-level noise model of our architectures and examine the impact of an imperfect interface between the two platforms on our hybrid architecture. We also develop a modified version of the swap-as-soon-as-possible policy with multiplexing, more suited to our architecture where some nodes perform error-correction while others do not. This modified policy significantly reduces the information storage time in memory qubits relative to the previously considered swap policies in encoded repeater chains.

quant-pharXiv:2609.19783•Sep 18, 2026•0 citations

Noise Adaptive Simulation of Steane Code Fidelity for Enhanced Quantum Communication Networks

N. Nagasoudhamani, Krishna Madhav Nukala, Bharthavarapu Nirosha +3 more

Quantum communication protocols such as superdense coding enable high-capacity information transfer using quantum entanglement. However, their performance is significantly affected by environmental noise and decoherence. This study presents an enhanced simulation framework for evaluating the Steane 7-qubit error correction code applied to superdense coding under realistic noise conditions. Building upon earlier models, the proposed work introduces robust circuit depth control mechanism and noise-aware simulation using Qiskit Aer to analyze depolarizing, amplitude damping, and phase damping errors. The system automatically encodes, decodes, and measures fidelity across varying noise probabilities, classifying results into performance tiers based on resilience. Comprehensive visualization through trend plots, heatmaps, and tier distributions offers clear insights into the impact of noise on quantum communication fidelity. The findings demonstrate that Steane encoding stabilizes fidelity within moderate noise levels, thereby improving the robustness of dense coding. This enhanced model provides a reproducible and scalable approach for studying quantum error correction, contributing to the design of noise-tolerant quantum communication networks.

International Conference on Ubiquitous Computing and Intelligent Information Systems (ICUIS)•Nov 26, 2025•0 citations

Realistic Simulation of Quantum Repeater with Encoding and Classical Error Correction

Sagar Patange, Caitao Zhan, Bikun Li +4 more

Quantum repeaters are essential for scalable long-distance quantum networking. As quantum information processing moves toward fault-tolerant and error-corrected operations, it becomes increasingly important to study quantum repeaters that also move beyond raw physical entanglement and towards logical entanglement. In this paper, we implement and simulate the quantum repeater with encoding and classical error correction (QRE-CEC) protocol in SeQUeNCe, a discrete-event simulator of quantum networks. The protocol distributes logical Bell pairs, performs encoded entanglement swapping, and uses classical error correction for the decoding of entanglement swapping measurement outcomes to determine Pauli-frame corrections. For this study, we extend SeQUeNCe with a stabilizer-based backend, add support for CSS code-based encoded operations, and integrate gate, measurement, idle decoherence, and state-initialization noise models. Our simulation results show that QRE-CEC suppresses all modeled errors to the second order. Also, QRE-CEC can distribute logical Bell pairs with 0.91 fidelity over a distance of 2000 km under the parameter regimes we study. Beyond protocol-level performance evaluation, our implementation exposes practical simulator and control-plane challenges that are typically abstracted away in theoretical studies.

quant-pharXiv:2605.06928•May 11, 2026•1 citation

Coherence in logical quantum channels

Joseph K. Iverson, John P. Preskill

Abstract We study the effectiveness of quantum error correction against coherent noise. Coherent errors (for example, unitary noise) can interfere constructively, so that in some cases the average infidelity of a quantum circuit subjected to coherent errors may increase quadratically with the circuit size; in contrast, when errors are incoherent (for example, depolarizing noise), the average infidelity increases at worst linearly with circuit size. We consider the performance of quantum stabilizer codes against a noise model in which a unitary rotation is applied to each qubit, where the axes and angles of rotation are nearly the same for all qubits. In particular, we show that for the toric code subject to such independent coherent noise, and for minimal-weight decoding, the logical channel after error correction becomes increasingly incoherent as the length of the code increases, provided the noise strength decays inversely with the code distance. A similar conclusion holds for weakly correlated coherent noise. Our methods can also be used for analyzing the performance of other codes and fault-tolerant protocols against coherent noise. However, our result does not show that the coherence of the logical channel is suppressed in the more physically relevant case where the noise strength is held constant as the code block grows, and we recount the difficulties that prevented us from extending the result to that case. Nevertheless our work supports the idea that fault-tolerant quantum computing schemes will work effectively against coherent noise, providing encouraging news for quantum hardware builders who worry about the damaging effects of control errors and coherent interactions with the environment.

arXiv:1912.04319•New Journal of Physics•Apr 29, 2020•77 citations
We present a circuit-level simulation of second-generation quantum repeaters with stabilizer-based quantum error correction. We model a two-segment repeater link including encoding, syndrome extraction, decoding, and entanglement swapping, and compare the performance of the single-error-correcting Steane and five-qubit stabilizer codes under different noise scenarios. To that extent, we consider noise sources with incoherent (depolarizing and dephasing) and coherent (systematic over-rotation) errors and incorporate them directly at the circuit level. While the Steane code outperforms the five-qubit code at coherent errors, the five-qubit code achieves higher end-to-end fidelities under incoherent noise in the low-noise regime when a large number of physical qubits is affected by it. At higher noise regimes, employing no code turns out to be the best option. In mixed noise scenarios, we observe moderate cross-effects between the noise classes regarding the error correction performance. We conclude that code selection in second-generation quantum repeaters must be adapted to the dominant physical noise mechanism and that circuit complexity and hardware-aware implementation options influence performance in coherent-error-dominated regimes, providing design insights for error correction in quantum repeaters.
We address the challenge of incorporating encoded quantum memories into an exact secret key rate analysis for small and intermediate-scale quantum repeaters. To this end, we introduce the check matrix model and quantify the resilience of stabilizer codes of up to eleven qubits against Pauli noise, obtaining analytical expressions for effective logical error probabilities. Generally, we find that the five-qubit and Steane codes either outperform more complex, larger codes in the experimentally relevant parameter regimes or have a lower resource overhead. Subsequently, we apply our results to calculate lower bounds on the asymptotic secret key rate in memory-corrected quantum repeaters when using the five-qubit or Steane codes on the memory qubits. The five-qubit code drastically increases the effective memory coherence time, reducing a phase flip probability of 1 % to 0.001 % when employing an error syndrome identification adapted to the quantum noise channel. Furthermore, it mitigates the impact of faulty Bell state measurements and imperfect state preparation, lowering the minimally required depolarization parameter for nonzero secret key rates in an eight-segment repeater from 98.4 % to 96.4 % . As a result, the memory-corrected quantum repeater can often generate secret keys in experimental parameter regimes where the unencoded repeater fails to produce a secret key. In an eight-segment repeater, one can even achieve nonvanishing secret key rates up to distances of 2000 km for memory coherence times of t c = 10 s or less using multiplexing. Assuming a zero-distance link-coupling efficiency p 0 = 0.7 , a depolarization parameter μ = 0.99 , t c = 10 s, and an 800 km total repeater length, we obtain a secret key rate of 4.85 Hz, beating both the unencoded repeater that provides 1.25 Hz and ideal twin-field quantum key distribution with 0.71 Hz at GHz clock rates.
We compare the performance of quantum error correcting codes when memory errors are unitary with the more familiar case of dephasing noise. For a wide range of codes, we analytically compute the effective logical channel that results when the error correction steps are performed noiselessly. Our examples include the entire family of repetition codes, the five-qubit, Steane, Shor, and surface codes. When errors are measured in terms of the diamond norm, we find that the error correction is typically much more effective for unitary errors than for dephasing. We observe this behavior for a wide range of codes after a single level of encoding, and in the thresholds of concatenated codes using hard decoders. We show that this holds with great generality by proving a bound on the performance of any stabilizer code when the noise at the physical level is unitary. By comparing the diamond norm error ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}$ of the logical qubit with the same quantity at the physical level ${D}_{\ensuremath{\diamond}}$, we show that ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}\ensuremath{\le}c{D}_{\ensuremath{\diamond}}^{d}$ where ddd is the distance of the code and ccc is a constant that depends on the code but not on the error. This bound compares very favorably to the performance of error correction for dephasing noise and other Pauli channels, where an error correcting code of odd distance ddd will exhibit a scaling ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}\ensuremath{\sim}{D}_{\ensuremath{\diamond}}^{(d+1)/2}$.
Long-distance entanglement distribution requires error correction protocols to compensate for qubit decoherence in quantum memories and noise introduced during entanglement swapping. We argue that repeater chains with error-correction capabilities should exploit more than one physical platform, combining the complementary strengths of different quantum memory technologies into a single hybrid repeater architecture. An important constituent of such an architecture is a hybrid repeater which combines type-1 memories, characterized by fast entanglement generation rates and suitability for multiplexing, and type-2 memories that offer long coherence times and low two-qubit gate error rates. Taking the resource-intensive nature of hybrid nodes into account, we propose and analyze repeater chains in which only a subset of nodes need to be hybrid, while the remaining nodes are simpler first-generation repeaters with no error-correction capability. Through detailed Monte Carlo simulations of fault-tolerant encoded repeater chain protocols based on the three-qubit phase-flip repetition code, the [[7,1,3]][[7,1,3]][[7,1,3]] Steane code, and the [[9,1,3]][[9,1,3]][[9,1,3]] Shor code, we demonstrate that these hybrid architectures outperform pure architectures based on a single memory platform in terms of end-to-end entanglement distribution rate. In our study we develop a full circuit-level noise model of our architectures and examine the impact of an imperfect interface between the two platforms on our hybrid architecture. We also develop a modified version of the swap-as-soon-as-possible policy with multiplexing, more suited to our architecture where some nodes perform error-correction while others do not. This modified policy significantly reduces the information storage time in memory qubits relative to the previously considered swap policies in encoded repeater chains.
Quantum communication protocols such as superdense coding enable high-capacity information transfer using quantum entanglement. However, their performance is significantly affected by environmental noise and decoherence. This study presents an enhanced simulation framework for evaluating the Steane 7-qubit error correction code applied to superdense coding under realistic noise conditions. Building upon earlier models, the proposed work introduces robust circuit depth control mechanism and noise-aware simulation using Qiskit Aer to analyze depolarizing, amplitude damping, and phase damping errors. The system automatically encodes, decodes, and measures fidelity across varying noise probabilities, classifying results into performance tiers based on resilience. Comprehensive visualization through trend plots, heatmaps, and tier distributions offers clear insights into the impact of noise on quantum communication fidelity. The findings demonstrate that Steane encoding stabilizes fidelity within moderate noise levels, thereby improving the robustness of dense coding. This enhanced model provides a reproducible and scalable approach for studying quantum error correction, contributing to the design of noise-tolerant quantum communication networks.
Quantum repeaters are essential for scalable long-distance quantum networking. As quantum information processing moves toward fault-tolerant and error-corrected operations, it becomes increasingly important to study quantum repeaters that also move beyond raw physical entanglement and towards logical entanglement. In this paper, we implement and simulate the quantum repeater with encoding and classical error correction (QRE-CEC) protocol in SeQUeNCe, a discrete-event simulator of quantum networks. The protocol distributes logical Bell pairs, performs encoded entanglement swapping, and uses classical error correction for the decoding of entanglement swapping measurement outcomes to determine Pauli-frame corrections. For this study, we extend SeQUeNCe with a stabilizer-based backend, add support for CSS code-based encoded operations, and integrate gate, measurement, idle decoherence, and state-initialization noise models. Our simulation results show that QRE-CEC suppresses all modeled errors to the second order. Also, QRE-CEC can distribute logical Bell pairs with 0.91 fidelity over a distance of 2000 km under the parameter regimes we study. Beyond protocol-level performance evaluation, our implementation exposes practical simulator and control-plane challenges that are typically abstracted away in theoretical studies.
Abstract We study the effectiveness of quantum error correction against coherent noise. Coherent errors (for example, unitary noise) can interfere constructively, so that in some cases the average infidelity of a quantum circuit subjected to coherent errors may increase quadratically with the circuit size; in contrast, when errors are incoherent (for example, depolarizing noise), the average infidelity increases at worst linearly with circuit size. We consider the performance of quantum stabilizer codes against a noise model in which a unitary rotation is applied to each qubit, where the axes and angles of rotation are nearly the same for all qubits. In particular, we show that for the toric code subject to such independent coherent noise, and for minimal-weight decoding, the logical channel after error correction becomes increasingly incoherent as the length of the code increases, provided the noise strength decays inversely with the code distance. A similar conclusion holds for weakly correlated coherent noise. Our methods can also be used for analyzing the performance of other codes and fault-tolerant protocols against coherent noise. However, our result does not show that the coherence of the logical channel is suppressed in the more physically relevant case where the noise strength is held constant as the code block grows, and we recount the difficulties that prevented us from extending the result to that case. Nevertheless our work supports the idea that fault-tolerant quantum computing schemes will work effectively against coherent noise, providing encouraging news for quantum hardware builders who worry about the damaging effects of control errors and coherent interactions with the environment.