Quantum repeaters are essential for scalable long-distance quantum networking. As quantum information processing moves toward fault-tolerant and error-corrected operations, it becomes increasingly important to study quantum repeaters that also move beyond raw physical entanglement and towards logical entanglement. In this paper, we implement and simulate the quantum repeater with encoding and classical error correction (QRE-CEC) protocol in SeQUeNCe, a discrete-event simulator of quantum networks. The protocol distributes logical Bell pairs, performs encoded entanglement swapping, and uses classical error correction for the decoding of entanglement swapping measurement outcomes to determine Pauli-frame corrections. For this study, we extend SeQUeNCe with a stabilizer-based backend, add support for CSS code-based encoded operations, and integrate gate, measurement, idle decoherence, and state-initialization noise models. Our simulation results show that QRE-CEC suppresses all modeled errors to the second order. Also, QRE-CEC can distribute logical Bell pairs with 0.91 fidelity over a distance of 2000 km under the parameter regimes we study. Beyond protocol-level performance evaluation, our implementation exposes practical simulator and control-plane challenges that are typically abstracted away in theoretical studies.
Quantum repeaters are essential for scalable long-distance quantum networking. As quantum information processing moves toward fault-tolerant and error-corrected operations, it becomes increasingly important to study quantum repeaters that also move beyond raw physical entanglement and towards logical entanglement. In this paper, we implement and simulate the quantum repeater with encoding and classical error correction (QRE-CEC) protocol in SeQUeNCe, a discrete-event simulator of quantum networks. The protocol distributes logical Bell pairs, performs encoded entanglement swapping, and uses classical error correction for the decoding of entanglement swapping measurement outcomes to determine Pauli-frame corrections. For this study, we extend SeQUeNCe with a stabilizer-based backend, add support for CSS code-based encoded operations, and integrate gate, measurement, idle decoherence, and state-initialization noise models. Our simulation results show that QRE-CEC suppresses all modeled errors to the second order. Also, QRE-CEC can distribute logical Bell pairs with 0.91 fidelity over a distance of 2000 km under the parameter regimes we study. Beyond protocol-level performance evaluation, our implementation exposes practical simulator and control-plane challenges that are typically abstracted away in theoretical studies.
The future of quantum repeater networking will require interoperability between various error-correcting codes. A few specific code conversions and even a generalized method are known, however, no detailed analysis of these techniques in the context of quantum networking has been performed. In this paper we analyze a generalized procedure to create Bell pairs encoded heterogeneously between two separate codes used often in error-corrected quantum repeater network designs. We begin with a physical Bell pair and then encode each qubit in a different error-correcting code, using entanglement purification to increase the fidelity. We investigate three separate protocols for preparing the purified encoded Bell pair. We calculate the error probability of those schemes between the Steane [[7,1,3]] code, a distance-3 surface code, and single physical qubits by Monte Carlo simulation under a standard Pauli error model and estimate the resource efficiency of the procedures. A local gate error rate of ${10}^{\ensuremath{-}3}$ allows us to create high-fidelity logical Bell pairs between any of our chosen codes. We find that a postselected model, where any detected parity flips in code stabilizers result in a restart of the protocol, performs the best.
When built, quantum repeater networks will require classical network protocols to control the quantum operations. However, existing work on repeaters has focused on the quantum operations themselves, with less attention paid to the contents, semantics, ordering and reliability of the classical control messages. In this work we define and describe our implementation of the classical control protocols. The state machines and packet sequences for the three protocol layers are presented, and operation confirmed by running the protocols over simulations of the physical network. We also show that proper management of the resources in a bottleneck link allows the aggregate throughput of two end-to-end flows to substantially exceed that of a single flow. Our layered architectural framework will support independent evolution of the separate protocol layers. Networks of quantum repeaters utilize three concepts to execute a distributed algorithm that creates entangled quantum states between nodes that are far apart: a basic entanglement mechanism which depends on the physical implementation, error management (in this work, we study a method known as purification), and finally a quantum state propagation layer (here we implement entanglement swapping, which builds multi-hop connections from single-hop connections). Some researchers are investigating approaches that are substantially different from entanglement swapping [30, 24, 19]. Here we focus on swapping, but the layered architecture approach is broadly applicable, allowing other implementations to replace only a single layer in the protocol stack. Previous work primarily focused on the physical and mathematical tools for building repeaters. Classical information is also needed to enable teleportation and swapping, as many quantum operations are not deterministic, and results of quantum measurements need to be reported to distant partners before further operations can proceed. Also, operations in the middle of the network must be coordinated to route and swap properly. This requires classical messages to make operations robust, but message propagation times penalize performance. Even though this delay is usually included in repeater simulations, prior work has not defined the protocols in detail, especially with respect to how all of the nodes make consistent decisions in a timely fashion. In this work, we introduce a protocol stack for networks of quantum repeaters that considers all the necessary classical messages and which can be easily adapted for different approaches at all three protocol layers. We run simulations of competing flows on a dumbbell topology in order to increase our confidence in the behavior of our network protocols. By adjusting the fidelity thresholds required for entanglement swapping, we show that some configurations boost the aggregate throughput for multiple flows significantly above the maximum for a single flow, taking advantage of resources that would otherwise sit idle. The operation of such complex networks and such delicate tuning of the system without formal protocol definitions would not be possible. Previous work has also concentrated almost exclusively on the dedicated use of a single line or chain of repeaters, delivering Bell pairs only to the two nodes at the ends of the chain. Networks, however, typically have more than two end points, and allow any pair of these end nodes to communicate. More topologically complex networks, with numerous end nodes, are obviously much more scalable than connecting every possible pair of nodes using a dedicated line of repeaters. we investigate how classical multiplexing schemes translate to the domain of quantum repeaters, in order to manage shared resources and active communication flows of data from different stations. We simulate four sharing protocols in a complex network with competing traffic. Circuit switching gives any individual flow the best performance, but makes poor use of the overall network and is inflexible. We use circuit switching as our baseline case to compare time division multiplexing, buffer space multiplexing, and statistical multiplexing, and show that all multiplexing schemes are better than circuit switching. For the particular network simulated, we find that statistical multiplexing outperforms time division multiplexing by 28% and buffer space multiplexing by 13%. We find that all three multiplexing schemes are fair; each flow is penalized a similar percentage of its throughput as the the total number of users in the network increases. Finally, statistical multiplexing requires no network-wide coordination of the use of quantum memory or channels, and is easier to implement than a robust, scalable scheme for the other protocols. Our current results suggest that the best strategy for quantum repeater networks is statistical multiplexing. (This is in fact the quantum analogue of the basis on which the Internet works.) However, our current simulations are done with no degradation of memory over time, using the assumption of quantum error-corrected memory at each repeater; inclusion of decoherence and a finite qubit lifetime remains as future work.
Measurement-based quantum repeaters employ entanglement distillation and swapping across links using locally prepared resource states of minimal size and local Bell measurements. In this Letter, we introduce a systematic protocol for measurement-based entanglement distillation and its application to repeaters that can leverage any stabilizer code. Given a code, we explicitly define the corresponding resource state and derive an error-recovery operation based on all Bell measurement outcomes. Our approach offers deeper insights into the impact of resource state noise on repeater performance while also providing strategies for efficient preparation and fault-tolerant preservation of resource states. As an application, we propose a measurement-based repeater protocol based on quantum low-density parity-check (QLDPC) codes, enabling constant-yield Bell state distribution over arbitrary distances. Numerical simulations identify a fault-tolerant threshold on the total physical error per repeater segment-including errors on resource states, remotely generated Bell states, and Bell measurements-and confirm that increasing the QLDPC code size further suppresses the logical error while maintaining a fixed encoding rate. This Letter establishes a scalable backbone for future global-scale fault-tolerant quantum networks.
Long-distance entanglement distribution requires error correction protocols to compensate for qubit decoherence in quantum memories and noise introduced during entanglement swapping. We argue that repeater chains with error-correction capabilities should exploit more than one physical platform, combining the complementary strengths of different quantum memory technologies into a single hybrid repeater architecture. An important constituent of such an architecture is a hybrid repeater which combines type-1 memories, characterized by fast entanglement generation rates and suitability for multiplexing, and type-2 memories that offer long coherence times and low two-qubit gate error rates. Taking the resource-intensive nature of hybrid nodes into account, we propose and analyze repeater chains in which only a subset of nodes need to be hybrid, while the remaining nodes are simpler first-generation repeaters with no error-correction capability. Through detailed Monte Carlo simulations of fault-tolerant encoded repeater chain protocols based on the three-qubit phase-flip repetition code, the [[7,1,3]] Steane code, and the [[9,1,3]] Shor code, we demonstrate that these hybrid architectures outperform pure architectures based on a single memory platform in terms of end-to-end entanglement distribution rate. In our study we develop a full circuit-level noise model of our architectures and examine the impact of an imperfect interface between the two platforms on our hybrid architecture. We also develop a modified version of the swap-as-soon-as-possible policy with multiplexing, more suited to our architecture where some nodes perform error-correction while others do not. This modified policy significantly reduces the information storage time in memory qubits relative to the previously considered swap policies in encoded repeater chains.
A fundamental challenge in generating and distributing high-fidelity entanglement in quantum repeater networks is the management and suppression of quantum errors. In this work, we develop an approach for extending the effective coherence time of shared entanglement between nodes by utilizing compact quantum error correcting (QEC) codes, which are scheduled and run locally on resource-constrained repeaters, to maximize the fidelity of the shared state, while also accounting for the incurred gate noise from QEC circuit operations. This local QEC approach stabilizes the distributed state via local operations, so independent execution on the nodes requires no additional synchronization or protocol overhead. Simulation results show significant improvements in the effective coherence time relative to idle decay, suggesting this approach could be useful in several quantum networking protocols such as entanglement generation, swapping, purification, and teleportation.
In the rapidly expanding field of quantum communication, maintaining state fidelity and transmission efficiency over long distances remains a fundamental challenge. Classical quantum repeater protocols rely on entanglement swapping and Bell-state measurements but remain vulnerable to channel noise, memory decoherence, and photon loss. This paper introduces a quantum redundancy and error verification protocol that integrates a three-qubit repetition code with teleportation-based repeaters. By distributing logical qubits across multiple parallel routes and employing stabilizer measurements to detect and correct single-qubit errors, the protocol ensures robustness against both byproduct operations arising from teleportation and physical channel errors. Our method circumvents the no-cloning theorem by encoding information across entangled blocks rather than duplicating quantum states. Through this combination of redundancy, Pauli-frame tracking, and parity-based error verification, the protocol achieves enhanced reliability and scalability, making it a strong candidate for the backbone of future quantum internet infrastructures.