arXiv:2610.31396
Predictive electronic feedback control for narrow-linewidth lasers
Jiatian Liu, Xuan Qi, Xiayang Fan, Shenchao Jin, Yuan Sun
Abstract
Narrow-linewidth lasers are essential for various key atom-laser interaction processes and optical setups in quantum coherent control, quantum precision measurement, and quantum information science. The Pound-Drever-Hall (PDH) technique is the standard method for the frequency-stabilization of narrow-linewidth lasers, but the inherent time delay in its feedback loop inevitably induces excessive phase noise, commonly known as servo bumps. Previous solutions primarily rely on additional optical components outside the electronic feedback control loop. Here, we propose and implement a generic method based on the Smith predictor to address the time-delay issue entirely within the electronic part of the PDH feedback control loop. We systematically demonstrate its capability to suppress phase noise and reduce servo bumps by adding only a single Field-Programmable Gate Array (FPGA) controller to the loop. This class of methods is demonstrated to be conceptually concise with minimal hardware overhead, effective in practice, and holds potential for a wide variety of future applications.
AI Summary
Finite delay in Pound–Drever–Hall (PDH) laser-frequency locks limits feedback bandwidth and produces phase-noise “servo bumps.” This paper tests whether these bumps can be reduced entirely within the electronic feedback loop, without additional optical filtering or feedforward optics. The method implements a Smith predictor alongside the PID controller in an FPGA. A fitted model of the laser–PDH response generates the difference between predicted instantaneous and delayed responses to the control signal; this correction is added to the measured error signal. The plant model and delay are obtained through swept-frequency, closed-loop response measurements. The FPGA runs at 125 MHz and supports modeled delays up to approximately $8.2\,\mu\mathrm{s}$; the measured external-loop delay is 106 ns, with controller latency included separately. Measurements of an 80 MHz optical beat between cavity-transmitted light and a frequency-shifted laser branch show a 14 dB reduction at servo-bump peaks near $\pm480$ kHz. The corresponding locked-state error spectrum shows 18 dB suppression. Parameter sweeps examine dependence on controller gain and model matching. In a Rydberg-EIT electric-field sensing experiment, compensation reduces a 3.7 dB noise bump near 140 kHz to the detector noise floor, yielding a reported 2.46 dB detection-SNR improvement. Performance depends on matching the predictive model to the physical system. Model mismatch motivates an added 20 kHz high-pass filter, while finite digital-pipeline latency leaves residual uncompensated delay. Other proposed applications, including optical clocks and coherent spectroscopy, are not demonstrated.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Comments
- 7 pages, 5 figures