arXiv:2610.17475
Mathematical framework for simulation of non-perturbative cavity optomechanics with plate-like dielectrics
Andrew Laeuger, Nancy Aggarwal
Abstract
Cavity optomechanical models typically treat a sensor either as a perturbative polarizable object in a pre-existing optical field, or solve the field at a fixed equilibrium and linearize in a fixed optical-mode basis. Neither self-consistently determines the spatially resolved cavity field, the optical force, the mechanical equilibrium, and the back-action when a finite-thickness dielectric plate intercepts the entire optical mode and restructures the intracavity field. In this companion paper to [1], we develop that treatment by extending the vacuum two-photon formalism to finite-thickness planar dielectrics, incorporating their Fresnel reflection, internal propagation, optical forces, and mechanical back-action directly into the field equations. We derive the carrier and sideband transfer functions needed to describe the coupled optical-mechanical system, including optomechanical cooling and the response to external perturbations. The result is a systematic starting point for calculating detector response and noise budgets for cavity experiments with intracavity dielectrics, including gravitational wave detectors deploying levitated sensors.
AI Summary
The paper develops a self-consistent optical–mechanical model for a finite-thickness dielectric plate that intercepts essentially the full cavity beam and substantially reshapes its field. The intended application is levitated-sensor force measurements and high-frequency gravitational-wave detection, where the optical field, trapping equilibrium, back-action and readout response must be calculated together. It extends the two-photon quadrature formalism with moving dielectric interfaces, Fresnel coefficients, internal propagation and optical-force expressions. Carrier fields determine equilibrium and stiffness; linearized sidebands and a mechanical susceptibility determine response functions. For the example two-mirror cavity, these calculations reduce to 28-variable carrier and 29-variable sideband linear systems. Numerical examples use a 1 m cavity, 1550 nm light, a 1 W trapping beam and a 10 mW probe. The response calculations distinguish direct optical signals from signals mediated by sensor motion, including their interference near mechanical resonance. Probe-induced frequency shifts and damping are extracted from susceptibility poles; the perturbative expressions agree with numerical transfer functions at sub-percent level. At maximum-transmission locking, normalized trap-force responses to mirror displacement are numerically independent of plate thickness and match empty-cavity predictions: below the cavity linewidth $\kappa$, the trap follows the end mirror while input-mirror coupling is suppressed. Noise-budget assembly is specified, but a complete sensitivity calculation is deferred. The model assumes lossless, axial plane-wave propagation and omits transverse trapping. It cannot describe residual trapping at transparent thicknesses $L_s=N\lambda/(2n)$. The gravitational-wave implementation uses effective mirror displacements and is restricted to $\Omega\ll\kappa$; higher-frequency propagation-phase effects are deferred.
Central claim may not hold: The back-action closure replaces the trap beam's displacement-dependent optical force with its static stiffness, omitting the frequency-dependent residual and therefore not generally retaining the trap beam's dynamical back-action. The displayed trap-resonance formula incorrectly multiplies the force derivative with respect to dimensionless position phase by k^2 rather than k, making it dimensionally inconsistent.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Comments
- 17 pages, 7 figures