arXiv:2610.15749
Nonperturbative optomechanics with thin, weakly reflective intracavity dielectrics
Andrew Laeuger, Nancy Aggarwal
Abstract
Levitated dielectric sensors are often treated as perturbative probes of a pre-existing optical field. We show that this picture fails for a novel sensor geometry: a dielectric plate whose transverse extent captures the full optical mode. Even an optically thin sensor with modest refractive index can heavily restructure the intracavity fields, effectively partitioning a cavity into two subcavities with substantial cross-coupling and producing new optical resonances and trapping sites with properties which deviate from the standard intuition. Conventional perturbative expressions for the cavity frequency shift and optomechanical coupling depart from the exact solution at thicknesses as small as $\simλ/(10n)$. Furthermore, cavity locking decreases the coupling and increases the trap stiffness by orders of magnitude, and the coupled subcavity structure permits appreciable optical cooling at zero detuning, a distinct behavior unique to this nonperturbative regime. These effects, sharing a common origin, establish a distinct regime of cavity optomechanics in which the sensor is no longer merely a probe of the cavity field, but an element that helps define it.
AI Summary
The paper asks when a thin, weakly reflective dielectric spanning an optical cavity’s transverse mode ceases to behave as a perturbative probe, and how its field redistribution affects levitation and dynamical backaction. It solves a lossless one-dimensional cavity–slab boundary-value problem using Fresnel interfaces and finite-thickness propagation, computes optical forces self-consistently, and treats mechanical sidebands through linearized two-photon quadratures. For representative parameters—$n=1.45$, wavelength $1550$ nm, cavity length $1$ m, finesse approximately $77$, and $1$ W trapping input—the slab produces coupled-subcavity resonances and thickness-dependent equilibria. Comparisons with lowest- and next-order perturbative formulas show visible deviations in cavity-frequency shifts and displacement coupling by thickness $L_s\sim\lambda/(10n)$; this is parameter-dependent, not a universal threshold. Simultaneously maximizing transmission and imposing stable force balance reduces the calculated coupling by roughly $3000$ and raises the trap frequency by up to $20$ relative to the specified unlocked configuration. Sideband-force calculations predict positive optical damping at zero secondary-beam detuning, attributed to an asymmetric multimode response despite maximal carrier transmission. A $10$ mW secondary beam is used to map damping versus detuning and thickness. The treatment assumes the slab captures essentially the entire transverse mode and examines axial motion only. Transverse stability and full three-dimensional fields remain unaddressed; transparent thicknesses $L_s=N\lambda/(2n)$ are excluded from the model’s applicability. Supported membranes require additional mechanical-force balance. Experimental validation and analytic explanations of fitted locked-coupling and trap-frequency scalings are left open.
Error found: The abstract's claim that zero-detuning cooling is unique to the nonperturbative regime is not established by the calculations and excludes known perturbative dissipative-coupling mechanisms without justification. The reported locked trap-frequency fit proportional to |sinc(nkL_s)|^(-1/2) diverges near transparent finite-thickness slabs, whereas the bounded cavity fields and vanishing slab reflectivity require the axial optical spring and trap frequency to vanish there. The interpretation of two position-scan peaks coalescing as two optical spectral modes merging is not established, because a single resonance branch can produce the same position-scan behavior.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Comments
- Main text: 5 pages, 6 figures. Supplemental Material: 5 pages, 6 figures. Comments welcome