Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.16871

Direct polarisation-state reconstruction with a temporal pointer: accessible states, resolution and optimal coupling

Shane P. Gervais, Lambert Giner

quant-phphysics.opticsSubmitted Oct 12, 2026• Announced Oct 13, 2026• 0 citations
arXivHTMLPDF

Abstract

Weak measurements are used to amplify small signals, to address foundational questions, and to characterise quantum states without tomography. In direct state reconstruction each amplitude of the state vector is proportional to a single complex weak value, which for a temporal pointer is read from the mean arrival time and the mean frequency of the postselected pulse. Such an experiment requires three quantities to be fixed, the coupling, the angular resolution demanded of the reconstruction, and the set of states over which the method remains usable, and these are commonly set by the available apparatus rather than derived. We derive all three for a Gaussian temporal pointer and an arbitrary postselection state. The states that cannot be reconstructed form a spherical cap centred on the state orthogonal to the postselection, whose geodesic half-angle follows from the largest of three independent thresholds and involves no adjustable parameter. Two states are distinguishable only if they differ by more than a minimal step fixed by the coupling, by the number of incident photons and by the sensitivity of the weak value along the path followed. For an inversion at first order in the coupling the systematic and statistical errors are opposed and fix an optimal coupling that varies as the inverse sixth root of the number of incident photons, whereas an exact inversion at finite coupling removes the systematic error, the remaining bound being one on the two-centroid readout rather than on the inversion, since below an amplitude equal to a quarter of the coupling two states give the same pair of centroids while their profiles differ. These results allow a direct reconstruction experiment to be dimensioned before the apparatus is assembled.

AI Summary

The paper asks how coupling strength, accessible input states and angular resolution constrain direct reconstruction of a pure polarisation qubit using a Gaussian temporal pointer. A polarisation-dependent delay $\tau$ couples the qubit to a pulse of width $\sigma$; temporal and spectral centroids, measured in separate configurations, encode a complex weak value. Exact centroid expressions are derived at arbitrary coupling $x=\tau/\sigma$, with weak-limit reconstruction formulae for arbitrary nonzero postselection components. Most precision and accessibility calculations specialise to diagonal postselection. For centroid-based reconstruction, the proposed minimum postselection amplitude is $\varepsilon_{\min}=\max[\sqrt{N_{\min}/N_{\rm total}},\sqrt{\Gamma t_{\rm acq}/N_{\rm total}},x/4]$, defining an exclusion cap of half-angle $2\arcsin\varepsilon_{\min}$ around the orthogonal state. The terms represent minimum detected counts, dark counts and finite-coupling effects. Along a known state-space path, centroid-noise propagation gives $\Delta\varphi_{\min}=1/[x\sqrt N\,|dW/d\varphi|]$. Balancing squared finite-coupling bias against statistical variance yields $x_{\rm opt}\propto N_{\rm total}^{-1/6}$ and reconstruction error proportional to $N_{\rm total}^{-1/3}$. An algebraic finite-coupling inversion removes this truncation bias and recovers $N_{\rm total}^{-1/2}$ statistical scaling, but has two branches: near orthogonal postselection, distinct states share both centroids, with a turning point at $\varepsilon\simeq x/4$ for linear polarisations. Numerical profile Fisher information and Monte Carlo tests supplement the analytic results. Full pulse profiles can distinguish centroid-degenerate states but require profile-based estimation. The analysis assumes pure inputs, a Gaussian pointer and negligible instrumental broadening; postselection offers no total-resource metrological advantage.

Little sign of AI-generated textIncrementalOverclaimsStrong assumptionsPossible error

Central claim may not hold: The abstract overstates arbitrary-postselection generality: near orthogonality the weak-regime crossover is approximately ε=|μν|x/2, whereas the reported ε=x/4 assumes balanced postselection. The claimed smallest accessible angular step at the coupling-limited exclusion boundary uses a weak-limit sensitivity that fails there, while the exact temporal-centroid sensitivity vanishes at the nearby fold and the spectral centroid supplies no linear-family sensitivity. The finite-coupling Fisher-information comparison incorrectly retains the original Gaussian variance σ² for the sample centroid even when the postselected temporal variance differs substantially. The exclusion threshold is not parameter-free or an accuracy guarantee, because it includes a chosen minimum event count and permits dark counts as large as the signal despite assuming a small dark-to-signal ratio. The fold discussion assigns x_opt=0.348 to the θ=140° state, although its optimum is approximately 0.043 and 0.348 is the optimum for θ=30°.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Comments
19 pages, 6 figures, 4 tables

Related papers

Partial-coherence weak measurement of polarization qubits with a temporal pointer: theory and experiment

Shane P. Gervais, Lambert Giner

Weak measurement has proven useful for metrology, for probing quantum paradoxes, and for the direct measurement of quantum states. Weak measurements of polarization qubits with temporal pointers provide a direct route to weak-value characterization, including in regimes where the pointer is only partially coherent. We derive a closed-form expression for the post-selected temporal shift that interpolates between the incoherent and coherent (ideal) weak-measurement limits through a single parameter $ν$, the pointer visibility. The expression is experimentally tested for a range of polarization states spanning three trajectories corresponding to rotations about the principal axes of the Poincaré sphere. Two of the trajectories provide parameter-free benchmarks, with the real part of the weak value following $\cos^2θ$ and $1/2$. In contrast, the weak value along the third trajectory is sensitive to incoherence and is well described by the single-parameter partial-coherence model, from which a reduced pointer visibility is obtained. Time shifts are extracted from the smoothed derivative of the pulse leading edge with internal calibration, reaching few-picosecond precision on 10 ns optical pulses using commercial components. The same apparatus also gives qualitative access to the imaginary quadrature through the frequency centroid, showing that temporal weak measurements remain accessible and quantitative in partially coherent pulsed systems.

quant-pharXiv:2610.14954•Results in Optics•Oct 13, 2026•0 citations

Direct Reconstruction of the Quantum Density Matrix by Strong Measurements

Luca Calderaro, Giulio Foletto, Daniele Dequal +2 more

New techniques based on weak measurements have recently been introduced to the field of quantum state reconstruction. Some of them allow the direct measurement of each matrix element of an unknown density operator and need only O(d) different operations, compared to d^{2} linearly independent projectors in the case of standard quantum state tomography, for the reconstruction of an arbitrary mixed state. However, due to the weakness of these couplings, these protocols are approximated and prone to large statistical errors. We propose a method which is similar to the weak measurement protocols but works regardless of the coupling strength: our protocol is not approximated and thus improves the accuracy and precision of the results with respect to weak measurement schemes. We experimentally apply it to the polarization state of single photons and compare the results to those of preexisting methods for different values of the coupling strength. Our results show that our method outperforms previous proposals in terms of accuracy and statistical errors.

arXiv:1803.10703•Physical Review Letters•Dec 7, 2018•57 citations

Weak measurement with the peak-contrast-ratio pointer

Junfan Zhu, Zhaoxue Li, Yurong Liu +4 more

Weak measurement as a nonperturbative theory has been shown to be powerful in the fundamentals of quantum mechanics and high-precision metrology, in which the pointer is of great importance to parameter estimation and experimental design. In this work, we find that under the conditions of weak coupling and Gaussian meter, the probability distribution after the postselection follows a bimodal function and the peak contrast ratio (PCR) can be applied as a special pointer, which is different from the shift of mean value. To obtain the PCR, only two values corresponding to the two peaks in the distribution function are required. We theoretically present the relation of the PCR and parameters to be estimated, and then demonstrate it in an experiment. Weak measurement with the PCR pointer has the advantages of reducing the requirements of the apparatus and suppressing noise, which also provides a heuristic approach for studying weak measurement when the weak value is very large.

Physical Review A•Mar 16, 2021•19 citations

State distinguishability under weak measurement and postselection: A unified system and device perspective

Philipp Stammer

We quantify the disturbance of a quantum state undergoing a sequence of observations and particularly focus on a weak measurement followed by postselection and compare these results to the projective counterpart. Taking into account the distinguishability of both the system and the device, we obtain the exact trade-off between the system state disturbance and the change in the device pointer state. We show that for particular postselection procedures the coupling strength between the system and the device can be significantly reduced without losing measurement sensitivity, which is directly transferred to a reduced state disturbance of the system. We observe that a weak measurement alone does not provide this advantage, and only in combination with postselection is a significant improvement in terms of increased measurement sensitivity and reduced state disturbance found. We further show that under realistic experimental conditions this state disturbance is small, whereas the exact postselection probability is considerably larger than the approximate value given by the overlap of the initial and final states when neglecting the system state disturbance.

arXiv:2011.04490•Physical Review A•Dec 10, 2020•1 citation

Autocorrelative weak-value amplification and simulating the protocol under strong Gaussian noise

Jing-Hui Huang, Xiangyun Hu, Adetunmise C. Dada +4 more

By choosing more orthogonality between preselection and postselection states, one can significantly improve the sensitivity in general optical quantum metrology based on the weak-value amplification (WVA) approach. However, increasing the orthogonality decreases the probability of detecting photons and makes the weak measurement difficult, especially when the weak measurement is disturbed by strong noise and the pointer is drowned in noise with a negative-decibel signal-to-noise ratio (SNR). In this article we introduce and numerically evaluate a modified weak-measurement protocol with a temporal pointer, namely, the autocorrelative weak-value amplification (AWVA) approach. Specifically, a small longitudinal time delay (tiny phase shift) $\ensuremath{\tau}$ of a Gaussian pulse is measured by implementing two simultaneous autocorrelative weak measurements under Gaussian white noise with different SNRs. The small quantities $\ensuremath{\tau}$ are obtained by measuring the autocorrelation coefficient of the pulses instead of fitting the shift of the mean value of the probe in the standard WVA technique. Simulation results show that the AWVA approach outperforms the standard WVA technique in the time domain with smaller statistical errors, remarkably increasing the precision of weak measurement under a strong noise background.

arXiv:2203.15231•Physical Review A•Nov 3, 2022•9 citations

Direct Reconstruction of the Quantum Density Operator via Measurements of Arbitrary Strength

Giulio Foletto

One of the fundamental problems of experimental quantum physics is the determination of the state of a system, which provides its accurate description and contains all the available information about it. The standard solution is quantum state tomography, a technique that employs a large number of measurements of complementary observables to reconstruct a general density operator. Recently, new protocols have been proposed which allow to obtain the matrix elements one by one with fewer and less complicated observations by exploiting so-called weak measurements, that perturb the system less than ideal projections at the cost of being less precise. This thesis presents an evolution of these schemes that eschews the weakness of the measurement, thus gaining in the accuracy of the results and in practical feasibility. We realized an experiment that uses these methods to reconstruct the density operator of the polarization state of light in single photons regime.

•Sep 1, 2017•0 citations
Weak measurements are used to amplify small signals, to address foundational questions, and to characterise quantum states without tomography. In direct state reconstruction each amplitude of the state vector is proportional to a single complex weak value, which for a temporal pointer is read from the mean arrival time and the mean frequency of the postselected pulse. Such an experiment requires three quantities to be fixed, the coupling, the angular resolution demanded of the reconstruction, and the set of states over which the method remains usable, and these are commonly set by the available apparatus rather than derived. We derive all three for a Gaussian temporal pointer and an arbitrary postselection state. The states that cannot be reconstructed form a spherical cap centred on the state orthogonal to the postselection, whose geodesic half-angle follows from the largest of three independent thresholds and involves no adjustable parameter. Two states are distinguishable only if they differ by more than a minimal step fixed by the coupling, by the number of incident photons and by the sensitivity of the weak value along the path followed. For an inversion at first order in the coupling the systematic and statistical errors are opposed and fix an optimal coupling that varies as the inverse sixth root of the number of incident photons, whereas an exact inversion at finite coupling removes the systematic error, the remaining bound being one on the two-centroid readout rather than on the inversion, since below an amplitude equal to a quarter of the coupling two states give the same pair of centroids while their profiles differ. These results allow a direct reconstruction experiment to be dimensioned before the apparatus is assembled.
The paper asks how coupling strength, accessible input states and angular resolution constrain direct reconstruction of a pure polarisation qubit using a Gaussian temporal pointer. A polarisation-dependent delay τ\tauτ couples the qubit to a pulse of width σ\sigmaσ; temporal and spectral centroids, measured in separate configurations, encode a complex weak value. Exact centroid expressions are derived at arbitrary coupling x=τ/σx=\tau/\sigmax=τ/σ, with weak-limit reconstruction formulae for arbitrary nonzero postselection components. Most precision and accessibility calculations specialise to diagonal postselection.
For centroid-based reconstruction, the proposed minimum postselection amplitude is εmin⁡=max⁡[Nmin⁡/Ntotal,Γtacq/Ntotal,x/4]\varepsilon_{\min}=\max[\sqrt{N_{\min}/N_{\rm total}},\sqrt{\Gamma t_{\rm acq}/N_{\rm total}},x/4]εmin​=max[Nmin​/Ntotal​​,Γtacq​/Ntotal​​,x/4], defining an exclusion cap of half-angle 2arcsin⁡εmin⁡2\arcsin\varepsilon_{\min}2arcsinεmin​ around the orthogonal state. The terms represent minimum detected counts, dark counts and finite-coupling effects. Along a known state-space path, centroid-noise propagation gives Δφmin⁡=1/[xN ∣dW/dφ∣]\Delta\varphi_{\min}=1/[x\sqrt N\,|dW/d\varphi|]Δφmin​=1/[xN​∣dW/dφ∣]. Balancing squared finite-coupling bias against statistical variance yields xopt∝Ntotal−1/6x_{\rm opt}\propto N_{\rm total}^{-1/6}xopt​∝Ntotal−1/6​ and reconstruction error proportional to Ntotal−1/3N_{\rm total}^{-1/3}Ntotal−1/3​.
An algebraic finite-coupling inversion removes this truncation bias and recovers Ntotal−1/2N_{\rm total}^{-1/2}Ntotal−1/2​ statistical scaling, but has two branches: near orthogonal postselection, distinct states share both centroids, with a turning point at ε≃x/4\varepsilon\simeq x/4ε≃x/4 for linear polarisations. Numerical profile Fisher information and Monte Carlo tests supplement the analytic results. Full pulse profiles can distinguish centroid-degenerate states but require profile-based estimation. The analysis assumes pure inputs, a Gaussian pointer and negligible instrumental broadening; postselection offers no total-resource metrological advantage.
Weak measurement has proven useful for metrology, for probing quantum paradoxes, and for the direct measurement of quantum states. Weak measurements of polarization qubits with temporal pointers provide a direct route to weak-value characterization, including in regimes where the pointer is only partially coherent. We derive a closed-form expression for the post-selected temporal shift that interpolates between the incoherent and coherent (ideal) weak-measurement limits through a single parameter ννν, the pointer visibility. The expression is experimentally tested for a range of polarization states spanning three trajectories corresponding to rotations about the principal axes of the Poincaré sphere. Two of the trajectories provide parameter-free benchmarks, with the real part of the weak value following cos⁡2θ\cos^2θcos2θ and 1/21/21/2. In contrast, the weak value along the third trajectory is sensitive to incoherence and is well described by the single-parameter partial-coherence model, from which a reduced pointer visibility is obtained. Time shifts are extracted from the smoothed derivative of the pulse leading edge with internal calibration, reaching few-picosecond precision on 10 ns optical pulses using commercial components. The same apparatus also gives qualitative access to the imaginary quadrature through the frequency centroid, showing that temporal weak measurements remain accessible and quantitative in partially coherent pulsed systems.
New techniques based on weak measurements have recently been introduced to the field of quantum state reconstruction. Some of them allow the direct measurement of each matrix element of an unknown density operator and need only O(d) different operations, compared to d^{2} linearly independent projectors in the case of standard quantum state tomography, for the reconstruction of an arbitrary mixed state. However, due to the weakness of these couplings, these protocols are approximated and prone to large statistical errors. We propose a method which is similar to the weak measurement protocols but works regardless of the coupling strength: our protocol is not approximated and thus improves the accuracy and precision of the results with respect to weak measurement schemes. We experimentally apply it to the polarization state of single photons and compare the results to those of preexisting methods for different values of the coupling strength. Our results show that our method outperforms previous proposals in terms of accuracy and statistical errors.
Weak measurement as a nonperturbative theory has been shown to be powerful in the fundamentals of quantum mechanics and high-precision metrology, in which the pointer is of great importance to parameter estimation and experimental design. In this work, we find that under the conditions of weak coupling and Gaussian meter, the probability distribution after the postselection follows a bimodal function and the peak contrast ratio (PCR) can be applied as a special pointer, which is different from the shift of mean value. To obtain the PCR, only two values corresponding to the two peaks in the distribution function are required. We theoretically present the relation of the PCR and parameters to be estimated, and then demonstrate it in an experiment. Weak measurement with the PCR pointer has the advantages of reducing the requirements of the apparatus and suppressing noise, which also provides a heuristic approach for studying weak measurement when the weak value is very large.
We quantify the disturbance of a quantum state undergoing a sequence of observations and particularly focus on a weak measurement followed by postselection and compare these results to the projective counterpart. Taking into account the distinguishability of both the system and the device, we obtain the exact trade-off between the system state disturbance and the change in the device pointer state. We show that for particular postselection procedures the coupling strength between the system and the device can be significantly reduced without losing measurement sensitivity, which is directly transferred to a reduced state disturbance of the system. We observe that a weak measurement alone does not provide this advantage, and only in combination with postselection is a significant improvement in terms of increased measurement sensitivity and reduced state disturbance found. We further show that under realistic experimental conditions this state disturbance is small, whereas the exact postselection probability is considerably larger than the approximate value given by the overlap of the initial and final states when neglecting the system state disturbance.
By choosing more orthogonality between preselection and postselection states, one can significantly improve the sensitivity in general optical quantum metrology based on the weak-value amplification (WVA) approach. However, increasing the orthogonality decreases the probability of detecting photons and makes the weak measurement difficult, especially when the weak measurement is disturbed by strong noise and the pointer is drowned in noise with a negative-decibel signal-to-noise ratio (SNR). In this article we introduce and numerically evaluate a modified weak-measurement protocol with a temporal pointer, namely, the autocorrelative weak-value amplification (AWVA) approach. Specifically, a small longitudinal time delay (tiny phase shift) $\ensuremath{\tau}$ of a Gaussian pulse is measured by implementing two simultaneous autocorrelative weak measurements under Gaussian white noise with different SNRs. The small quantities $\ensuremath{\tau}$ are obtained by measuring the autocorrelation coefficient of the pulses instead of fitting the shift of the mean value of the probe in the standard WVA technique. Simulation results show that the AWVA approach outperforms the standard WVA technique in the time domain with smaller statistical errors, remarkably increasing the precision of weak measurement under a strong noise background.
One of the fundamental problems of experimental quantum physics is the determination of the state of a system, which provides its accurate description and contains all the available information about it. The standard solution is quantum state tomography, a technique that employs a large number of measurements of complementary observables to reconstruct a general density operator. Recently, new protocols have been proposed which allow to obtain the matrix elements one by one with fewer and less complicated observations by exploiting so-called weak measurements, that perturb the system less than ideal projections at the cost of being less precise. This thesis presents an evolution of these schemes that eschews the weakness of the measurement, thus gaining in the accuracy of the results and in practical feasibility. We realized an experiment that uses these methods to reconstruct the density operator of the polarization state of light in single photons regime.