Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.11477

Quantitative Rules for Parallel Calibration and Drift-Resilient Maintenance of Large-Scale Superconducting Quantum Processors

Zhihao Wu, Kechengqi Zhu, Shichuan Xue, Xinfang Zhang, Zhaohua Yang, Zhida Zhang, Shun Hu, Cong Li, Dingdong Liu, Kangding Zhao, Peng Luo, Lingling Lao, Xiang Fu, Mingtang Deng, Junjie Wu, Kai Lu

quant-phSubmitted Oct 8, 2026• Announced Oct 9, 2026• 0 citations
arXivHTMLPDF

Abstract

As superconducting quantum processors scale toward hundreds of qubits, manual calibration becomes increasingly costly and difficult to sustain. Here we address two system-level factors governing automated calibration, namely, crosstalk induced by parallel operations and temporal drift of control parameters. On a 66-qubit superconducting processor, cross-entropy benchmarking shows that single-qubit calibration tolerates full-chip concurrency with minimal fidelity loss, whereas CZ calibration requires a minimum coupler-graph distance of four to avoid elevated control errors. Continuous monitoring of representative qubit and coupler parameters further yields quantitative refresh rules that assign refresh priority by error-budget consumption. These results turn two conventionally heuristic choices, the concurrency density of calibration tasks and the refresh priority of each control parameter, into measurable operating rules. Implemented within an automated calibration framework, the rules support a six-qubit Greenberger-Horne-Zeilinger state with a zero-noise-extrapolated fidelity of 89.64%, distance-dependent logical-error suppression in a single-cycle repetition-code benchmark, and a reduction of the mean single-qubit error from 0.023 to 0.011 on a 337-qubit processor, providing an experimentally grounded reference for the automated calibration and maintenance of current and future large-scale superconducting quantum systems.

AI Summary

The paper investigates how calibration concurrency and parameter drift constrain automated operation of superconducting processors. Experiments use a 66-qubit, 109-coupler device to select parallel-calibration densities and prioritize parameter refreshes within a dependency-ordered calibration workflow. Single-qubit XEB error distributions remain nearly unchanged from isolated operation to full-chip concurrency, with measured errors below $0.4\%$. For CZ calibration, minimum coupler-graph distance $d_{\mathrm C}=2$ increases mean control error to $0.91\%$, compared with $0.61\%$, $0.59\%$, and $0.54\%$ at distances 4, 6, and isolated operation. Control error is estimated by subtracting speckle-purity benchmarking error from XEB error. Distance 4 is therefore the densest tested configuration preserving approximately isolated performance; timing fits indicate saturation from classical-control overhead. Monitoring 26 qubits and 36 couplers over 44–48 hours yields refresh priorities using one-hour-equivalent parameter changes, calibration uncertainty, and modeled gate-error-budget consumption. CZ coupling, qubit frequency, and CZ dynamic phase receive highest priority. The method produces rankings, not numerical refresh intervals; sequential updates confound underlying drift sources, and the hierarchy is specific to the device and observation window. Circuit validation gives six-qubit GHZ fidelities of $71.92$–$82.10\%$ before zero-noise extrapolation and a maximum extrapolated value of $89.64\%$. Single-cycle repetition-code majority-vote errors decrease by over three orders of magnitude from distance 3 to 9, but are dominated by preparation/readout errors and are not comparable to surface-code errors per cycle. Separately, automated recalibration reduces mean single-qubit XEB error from $0.023$ to $0.011$ across 337 active qubits. The concurrency rule remains specific to the tested layout, pulses, and control resources.

Some signs of AI-generated textIncrementalMissing comparisonPossible error

Central claim may not hold: The claimed minimum CZ separation of four exceeds the evidence, which establishes only that four is the densest tested acceptable separation. The drift-priority method neither removes measurement noise from squared increments nor justifies its one-hour temporal scaling, so its detectability threshold does not establish resolved physical drift, particularly for the high-priority dynamic-phase entry. The validation experiments lack a comparison that isolates the benefit of the proposed concurrency and refresh-priority rules from ordinary calibration and maintenance. The microwave-crosstalk appendix presents an unjustified ordinary-integral exponential as exact evolution and uses a non-Hermitian propagator that does not describe unconditional relaxation and dephasing. The flux-crosstalk appendix misidentifies normalized squared trace overlap as average gate fidelity, although its final conditional-phase infidelity coefficient is correct for actual average gate fidelity.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Related papers

High-Precision Calibration Workflow Achieves Above $99.9\%$ CZ Gate Fidelity on a Scalable Superconducting Processor

Huili Zhang, Meiling Li, Shuang Yang +6 more

High-fidelity universal two-qubit gates are critical for building fault-tolerant quantum computers. In scalable superconducting processors, shortened coherence times introduce more incoherent errors in gate operations. With a constrained error budget, there is reduced tolerance for coherent errors stemming from parameter deviations. In this work, we develop a closed-loop workflow to enhance the CZ gate calibration precision. Utilizing the echoed leakage error amplification (ELEA) and the repurposed context-aware fidelity estimation (CAFE) circuits, we suppress the population leakage to non-computational states, and, for the first time, demonstrate a CZ gate fidelity exceeding $99.9\%$ on an 84-qubit processor, with coherent error suppressed to $0.007\%$. Meanwhile, we obtain a median fidelity of $99.25\%$ among 72 CZ gates, demonstrating that the workflow can be generalized to the calibration of parallel CZ gates. Finally, we realize automated calibration and observe enhanced stability of the CZ gate throughout 9-hour comparative monitoring experiments. Our results, realized on a completely domestic platform, establish an efficient and automated route to quantum computation with superconducting quantum systems.

quant-pharXiv:2607.01422•Jul 3, 2026•5 citations

Scalable Suppression of XY Crosstalk by Pulse-Level Control in Superconducting Quantum Processors

Hui-Hang Chen, Chiao-Hsuan Wang

As superconducting quantum processors continue to scale, high-performance quantum control becomes increasingly critical. In densely integrated architectures, unwanted interactions between nearby qubits give rise to crosstalk errors that limit operational performance. In particular, direct exchange-type (XY) interactions are typically minimized by designing large frequency detunings between neighboring qubits at the hardware level. However, frequency crowding in large-scale systems ultimately restricts the achievable frequency separation. While such XY coupling facilitates entangling gate operations, its residual presence poses a key challenge during single-qubit controls. Here, we propose a scalable pulse-level control framework, incorporating frequency modulation (FM) and dynamical decoupling (DD), to suppress XY crosstalk errors. This framework operates independently of coupling strengths, reducing calibration overhead and naturally supporting multi-qubit connectivity. Numerical simulations show orders-of-magnitude reductions in infidelity for both idle and single-qubit gates in a two-qubit system. We further validate scalability in a five-qubit layout, where crosstalk between a central qubit and four neighbors is simultaneously suppressed. Our crosstalk suppression framework provides a practical route toward high-fidelity operation in dense superconducting architectures.

quant-pharXiv:2601.05231•Physical Review Applied•Jan 9, 2026•1 citation

High-precision pulse calibration of tunable couplers for high-fidelity two-qubit gates in superconducting quantum processors

Tian-Ming Li, Jiachi Zhang, Bing-Jie Chen +23 more

For superconducting quantum processors, stable high-fidelity two-qubit operations depend on precise flux control of the tunable coupler. However, the pulse distortion poses a significant challenge to the control precision. Current calibration methods, which often rely on microwave crosstalk or additional readout resonators for coupler excitation and readout, tend to be cumbersome and inefficient, especially when couplers only have flux control. Here, we introduce and experimentally validate a pulse calibration scheme that exploits the strong coupling between qubits and couplers, eliminating the need for extra coupler readout and excitation. Our method directly measures the short-time and long-time step responses of the coupler flux pulse transient, enabling us to apply predistortion to subsequent signals using fast Fourier transformation and deconvolution. This approach not only simplifies the calibration process, but also significantly improves the precision and stability of the flux control. We demonstrate the efficacy of our method through the implementation of diabatic controlled-$Z$ (cz) and $i$swap gates with fidelities of $99.61\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.04\mathrm{%}$ and $99.82\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.02\mathrm{%}$, respectively, as well as a series of diabatic controlled-phase gates with high fidelities characterized by cross-entropy benchmarking. The consistency and robustness of our technique are further validated by the reduction in pulse distortion and phase error observed across multilayer cz gates. These results underscore the potential of our calibration and predistortion method to enhance the performance of two-qubit gates in superconducting quantum processors.

arXiv:2410.15041•Physical Review Applied•Feb 21, 2025•22 citations

Mitigating crosstalk errors for simultaneous single-qubit gates on a superconducting quantum processor

Jaap J. Wesdorp, Eric Hyyppä, Joona Andersson +61 more

Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.

quant-pharXiv:2603.11018•PRX Quantum•Mar 12, 2026•15 citations

Parallel Quantum Gates via Scalable Subsystem-Optimized Robust Control

Xiaodong Yang, Ran Liu, Jun Li

Accurate and efficient implementation of parallel quantum gates is crucial for scalable quantum information processing. However, the unavoidable crosstalk between qubits in current noisy processors impedes the achievement of high gate fidelities and renders full Hilbert-space control optimization prohibitively difficult. Here, we overcome this challenge by reducing the full-system optimization to crosstalk-robust control over constant-sized subsystems, which dramatically reduces the computational cost. Our method effectively eliminates the leading-order gate operation deviations induced by crosstalk, thereby suppressing error rates. Within this framework, we construct analytical pulse solutions for parallel single-qubit gates and numerical pulses for parallel multi-qubit operations. We validate the proposed approach numerically across multiple platforms, including coupled nitrogen-vacancy centers, a nuclear-spin processor, and superconducting-qubit arrays with up to 200 qubits. As a result, the noise scaling is reduced from exponential to linear for parallel single-qubit gates, and an order-of-magnitude reduction is achieved for parallel multi-qubit gates. Moreover, our method does not require precise knowledge of crosstalk strengths and makes no assumption about the underlying qubit connectivity or lattice geometry, thereby establishing a scalable framework for parallel quantum control in large-scale quantum architectures.

quant-pharXiv:2601.01990•Physical Review A•Jan 6, 2026•1 citation

Fast quantum calibration using Bayesian optimization with state parameter estimator for non-Markovian environment

Anonymous, Shahid Qamar, Xiao Xiao +5 more

As quantum systems expand in size and complexity, manual qubit characterization and gate optimization will be a non-scalable and time-consuming venture. Physical qubits have to be carefully calibrated because quantum processors are very sensitive to the external environment, with control hardware parameters slowly drifting during operation, affecting gate fidelity. Currently, existing calibration techniques require complex and lengthy measurements to independently control the different parameters of each gate and are unscalable to large quantum systems. Therefore, fully automated protocols with the desired functionalities are required to speed up the calibration process. This paper aims to propose single-qubit calibration of superconducting qubits under continuous weak measurements from a real physical experimental settings point of view. We propose a real-time optimal estimator of qubit states, which utilizes weak measurements and Bayesian optimization to find the optimal control pulses for gate design. Our numerical results demonstrate a significant reduction in the calibration process, obtaining a high gate fidelity. Using the proposed estimator we estimated the qubit state with and without measurement noise and the estimation error between the qubit state and the estimator state is less than 0.02. With this setup, we drive an approximated pi pulse with final fidelity of 0.9928. This shows that our proposed strategy is robust against the presence of measurement and environmental noise and can also be applicable for the calibration of many other quantum computation technologies.

arXiv:2205.12929•Physical Review A•Jul 14, 2026•5 citations
As superconducting quantum processors scale toward hundreds of qubits, manual calibration becomes increasingly costly and difficult to sustain. Here we address two system-level factors governing automated calibration, namely, crosstalk induced by parallel operations and temporal drift of control parameters. On a 66-qubit superconducting processor, cross-entropy benchmarking shows that single-qubit calibration tolerates full-chip concurrency with minimal fidelity loss, whereas CZ calibration requires a minimum coupler-graph distance of four to avoid elevated control errors. Continuous monitoring of representative qubit and coupler parameters further yields quantitative refresh rules that assign refresh priority by error-budget consumption. These results turn two conventionally heuristic choices, the concurrency density of calibration tasks and the refresh priority of each control parameter, into measurable operating rules. Implemented within an automated calibration framework, the rules support a six-qubit Greenberger-Horne-Zeilinger state with a zero-noise-extrapolated fidelity of 89.64%, distance-dependent logical-error suppression in a single-cycle repetition-code benchmark, and a reduction of the mean single-qubit error from 0.023 to 0.011 on a 337-qubit processor, providing an experimentally grounded reference for the automated calibration and maintenance of current and future large-scale superconducting quantum systems.
The paper investigates how calibration concurrency and parameter drift constrain automated operation of superconducting processors. Experiments use a 66-qubit, 109-coupler device to select parallel-calibration densities and prioritize parameter refreshes within a dependency-ordered calibration workflow.
Single-qubit XEB error distributions remain nearly unchanged from isolated operation to full-chip concurrency, with measured errors below 0.4%0.4\%0.4%. For CZ calibration, minimum coupler-graph distance dC=2d_{\mathrm C}=2dC​=2 increases mean control error to 0.91%0.91\%0.91%, compared with 0.61%0.61\%0.61%, 0.59%0.59\%0.59%, and 0.54%0.54\%0.54% at distances 4, 6, and isolated operation. Control error is estimated by subtracting speckle-purity benchmarking error from XEB error. Distance 4 is therefore the densest tested configuration preserving approximately isolated performance; timing fits indicate saturation from classical-control overhead.
Monitoring 26 qubits and 36 couplers over 44–48 hours yields refresh priorities using one-hour-equivalent parameter changes, calibration uncertainty, and modeled gate-error-budget consumption. CZ coupling, qubit frequency, and CZ dynamic phase receive highest priority. The method produces rankings, not numerical refresh intervals; sequential updates confound underlying drift sources, and the hierarchy is specific to the device and observation window.
Circuit validation gives six-qubit GHZ fidelities of 71.9271.9271.92–82.10%82.10\%82.10% before zero-noise extrapolation and a maximum extrapolated value of 89.64%89.64\%89.64%. Single-cycle repetition-code majority-vote errors decrease by over three orders of magnitude from distance 3 to 9, but are dominated by preparation/readout errors and are not comparable to surface-code errors per cycle. Separately, automated recalibration reduces mean single-qubit XEB error from 0.0230.0230.023 to 0.0110.0110.011 across 337 active qubits. The concurrency rule remains specific to the tested layout, pulses, and control resources.
High-Precision Calibration Workflow Achieves Above 99.9%99.9\%99.9% CZ Gate Fidelity on a Scalable Superconducting Processor
High-fidelity universal two-qubit gates are critical for building fault-tolerant quantum computers. In scalable superconducting processors, shortened coherence times introduce more incoherent errors in gate operations. With a constrained error budget, there is reduced tolerance for coherent errors stemming from parameter deviations. In this work, we develop a closed-loop workflow to enhance the CZ gate calibration precision. Utilizing the echoed leakage error amplification (ELEA) and the repurposed context-aware fidelity estimation (CAFE) circuits, we suppress the population leakage to non-computational states, and, for the first time, demonstrate a CZ gate fidelity exceeding 99.9%99.9\%99.9% on an 84-qubit processor, with coherent error suppressed to 0.007%0.007\%0.007%. Meanwhile, we obtain a median fidelity of 99.25%99.25\%99.25% among 72 CZ gates, demonstrating that the workflow can be generalized to the calibration of parallel CZ gates. Finally, we realize automated calibration and observe enhanced stability of the CZ gate throughout 9-hour comparative monitoring experiments. Our results, realized on a completely domestic platform, establish an efficient and automated route to quantum computation with superconducting quantum systems.
As superconducting quantum processors continue to scale, high-performance quantum control becomes increasingly critical. In densely integrated architectures, unwanted interactions between nearby qubits give rise to crosstalk errors that limit operational performance. In particular, direct exchange-type (XY) interactions are typically minimized by designing large frequency detunings between neighboring qubits at the hardware level. However, frequency crowding in large-scale systems ultimately restricts the achievable frequency separation. While such XY coupling facilitates entangling gate operations, its residual presence poses a key challenge during single-qubit controls. Here, we propose a scalable pulse-level control framework, incorporating frequency modulation (FM) and dynamical decoupling (DD), to suppress XY crosstalk errors. This framework operates independently of coupling strengths, reducing calibration overhead and naturally supporting multi-qubit connectivity. Numerical simulations show orders-of-magnitude reductions in infidelity for both idle and single-qubit gates in a two-qubit system. We further validate scalability in a five-qubit layout, where crosstalk between a central qubit and four neighbors is simultaneously suppressed. Our crosstalk suppression framework provides a practical route toward high-fidelity operation in dense superconducting architectures.
For superconducting quantum processors, stable high-fidelity two-qubit operations depend on precise flux control of the tunable coupler. However, the pulse distortion poses a significant challenge to the control precision. Current calibration methods, which often rely on microwave crosstalk or additional readout resonators for coupler excitation and readout, tend to be cumbersome and inefficient, especially when couplers only have flux control. Here, we introduce and experimentally validate a pulse calibration scheme that exploits the strong coupling between qubits and couplers, eliminating the need for extra coupler readout and excitation. Our method directly measures the short-time and long-time step responses of the coupler flux pulse transient, enabling us to apply predistortion to subsequent signals using fast Fourier transformation and deconvolution. This approach not only simplifies the calibration process, but also significantly improves the precision and stability of the flux control. We demonstrate the efficacy of our method through the implementation of diabatic controlled-ZZZ (cz) and iiiswap gates with fidelities of $99.61\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.04\mathrm{%}$ and $99.82\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.02\mathrm{%}$, respectively, as well as a series of diabatic controlled-phase gates with high fidelities characterized by cross-entropy benchmarking. The consistency and robustness of our technique are further validated by the reduction in pulse distortion and phase error observed across multilayer cz gates. These results underscore the potential of our calibration and predistortion method to enhance the performance of two-qubit gates in superconducting quantum processors.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.
Accurate and efficient implementation of parallel quantum gates is crucial for scalable quantum information processing. However, the unavoidable crosstalk between qubits in current noisy processors impedes the achievement of high gate fidelities and renders full Hilbert-space control optimization prohibitively difficult. Here, we overcome this challenge by reducing the full-system optimization to crosstalk-robust control over constant-sized subsystems, which dramatically reduces the computational cost. Our method effectively eliminates the leading-order gate operation deviations induced by crosstalk, thereby suppressing error rates. Within this framework, we construct analytical pulse solutions for parallel single-qubit gates and numerical pulses for parallel multi-qubit operations. We validate the proposed approach numerically across multiple platforms, including coupled nitrogen-vacancy centers, a nuclear-spin processor, and superconducting-qubit arrays with up to 200 qubits. As a result, the noise scaling is reduced from exponential to linear for parallel single-qubit gates, and an order-of-magnitude reduction is achieved for parallel multi-qubit gates. Moreover, our method does not require precise knowledge of crosstalk strengths and makes no assumption about the underlying qubit connectivity or lattice geometry, thereby establishing a scalable framework for parallel quantum control in large-scale quantum architectures.
As quantum systems expand in size and complexity, manual qubit characterization and gate optimization will be a non-scalable and time-consuming venture. Physical qubits have to be carefully calibrated because quantum processors are very sensitive to the external environment, with control hardware parameters slowly drifting during operation, affecting gate fidelity. Currently, existing calibration techniques require complex and lengthy measurements to independently control the different parameters of each gate and are unscalable to large quantum systems. Therefore, fully automated protocols with the desired functionalities are required to speed up the calibration process. This paper aims to propose single-qubit calibration of superconducting qubits under continuous weak measurements from a real physical experimental settings point of view. We propose a real-time optimal estimator of qubit states, which utilizes weak measurements and Bayesian optimization to find the optimal control pulses for gate design. Our numerical results demonstrate a significant reduction in the calibration process, obtaining a high gate fidelity. Using the proposed estimator we estimated the qubit state with and without measurement noise and the estimation error between the qubit state and the estimator state is less than 0.02. With this setup, we drive an approximated pi pulse with final fidelity of 0.9928. This shows that our proposed strategy is robust against the presence of measurement and environmental noise and can also be applicable for the calibration of many other quantum computation technologies.