Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.09062

Geometric heat pumping on a quantum processor

Gerónimo J. Caselli, Luis O. Manuel, Liliana Arrachea, Pablo S. Cornaglia

quant-phcond-mat.mes-hallcond-mat.otherSubmitted Oct 6, 2026• Announced Oct 8, 2026• 0 citations• Revised Oct 15, 2026 (v2)
v1 · Oct 6, 2026v2 · Oct 15, 2026
arXivHTMLPDF

Abstract

Geometric heat pumping is the transfer of energy between reservoirs at equal temperature where the heat exchanged in an adiabatic cycle depends only on the driving contour in parameter space. We implement this mechanism on a superconducting quantum processor using a collision model, where a driven qubit interacts repeatedly with two ancilla qubits that are prepared in thermal states and emulate the reservoirs. Energy measurements before and after each interaction provide a calorimetric record of the heat exchanged with each reservoir. By reversing the driving contour, we extract a heat contribution associated with pumping. Its dependence on the period and on the contour follows exact simulations of the collision model, without adjustable parameters, and approaches in the slow-driving regime the geometric limit of the corresponding Lindblad dynamics.

AI Summary

Can cyclic driving transfer heat between equal-temperature reservoirs with a contribution determined by the driving contour rather than its speed? This paper implements a driven-qubit model of geometric heat pumping on a superconducting quantum processor, distinguishing the pumping signal from dissipative heating. A working qubit interacts with two repeatedly reset thermal ancillas through energy-conserving partial swaps. Modulating its level splitting and relative reservoir couplings defines a closed contour; ancilla energy measurements before and after each collision provide calorimetric heat records. The implementation uses three qubits on IBM’s Heron r2 processor, with 48 cells, 384 CZ gates, approximately $690\,\mu\mathrm{s}$ execution time, and 3,000 shots per circuit, without error mitigation or readout correction. Half the heat difference between opposite contour orientations isolates an orientation-odd contribution. Its measured period and contour-width dependence is compared with exact collision-model simulations without fitted parameters. The model approaches Lindblad dynamics and, under slow driving, $Q_\alpha=Q_\alpha^{\rm geo}+\mathcal C_\alpha/\mathcal T+O(\mathcal T^{-2})$, with opposite geometric heats in the two reservoirs. For the principal contour, the predicted geometric magnitude is approximately $0.334T$; expanding the contour across the first quadrant approaches the theoretical bound $T\ln2$. Measurements show oppositely signed odd heats and a signal consistent with zero for zero enclosed area. Processor noise produces heating larger than the pumped contribution, preventing net cooling. Orientation subtraction removes the even background only from the estimator, not physically; residual orientation-odd noise attenuates the measured slow-driving signal below the geometric prediction.

Little sign of AI-generated textIncremental

Error found: The abstract's convergence statement needs qualification because the measured orientation-odd heat saturates below the Lindblad geometric value, as the experimental section explicitly acknowledges. The supplied text does not define the protocol function f or explain κ, preventing independent reconstruction of the driving contour, its quoted geometric heat, and the numerical comparisons.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Comments
6 pages, 3 figures + Supplemental Material

Related papers

Lindbladian approach for many-qubit thermal machines: enhancing the performance with geometric heat pumping by interaction

Gerónimo J. Caselli, Luis O. Manuel, Liliana Arrachea

We present a detailed analysis of slowly driven quantum thermal machines based on interacting qubits within the framework of the Lindblad master equation. By implementing a systematic expansion in the driving rate, we derive explicit expressions for the rate of work of the driving forces, the heat currents exchanged with the reservoirs, and the entropy production up to second order, ensuring full thermodynamic consistency in the linear-response regime. The formalism naturally separates geometric and dissipative contributions, identified by a Berry curvature and a metric in parameter space, respectively. Analytical results show that the geometric heat pumped per cycle is bounded by $k_B T N_q \ln 2$ for $N_q$ non-interacting qubits, in direct analogy with the Landauer limit for entropy change. This bound can be surpassed when qubit interactions and asymmetric couplings to the baths are introduced. Numerical results for the interacting two-qubit system reveal a non-trivial role of the interaction between qubits and the coupling between the qubits and the baths in the behavior of the dissipated power. The approach provides a general platform for studying dissipation, pumping, and performance optimization in driven quantum devices operating as heat engines.

quant-pharXiv:2511.16591•Nov 21, 2025

Geometric Optimization of Nonequilibrium Adiabatic Thermal Machines and Implementation in a Qubit System

Pablo Terrén Alonso, Paolo Abiuso, Martí Perarnau-Llobet +1 more

We adopt a geometric approach to describe the performance of adiabatic quantum machines, operating under slow time-dependent driving and in contact with two reservoirs with a temperature bias during all the cycle.We show that the problem of optimizing the power generation of a heat engine and the efficiency of both the heat engine and refrigerator operational modes is reduced to an isoperimetric problem with nontrivial underlying metrics and curvature.This corresponds to the maximization of the ratio between the area enclosed by a closed curve and its corresponding length.We illustrate this procedure in a qubit coupled to two reservoirs operating as a thermal machine by means of an adiabatic protocol.

arXiv:2109.12648•PRX Quantum•Feb 16, 2022•38 citations

Energy dynamics, heat production and heat–work conversion with qubits: toward the development of quantum machines

Liliana Arrachea

We present an overview of recent advances in the study of energy dynamics and mechanisms for energy conversion in qubit systems with special focus on realizations in superconducting quantum circuits. We briefly introduce the relevant theoretical framework to analyze heat generation, energy transport and energy conversion in these systems with and without time-dependent driving considering the effect of equilibrium and non-equilibrium environments. We analyze specific problems and mechanisms under current investigation in the context of qubit systems. These include the problem of energy dissipation and possible routes for its control, energy pumping between driving sources and heat pumping between reservoirs, implementation of thermal machines and mechanisms for energy storage. We highlight the underlying fundamental phenomena related to geometrical and topological properties, as well as many-body correlations. We also present an overview of recent experimental activity in this field.

arXiv:2205.14200•Reports on Progress in Physics•Jan 5, 2023•62 citations

Initial demonstration of a quantum heat engine based on dissipation-engineered superconducting circuits

Tuomas Uusnäkki, Timm Mörstedt, Wallace S. Teixeira +2 more

Quantum heat engines require precise control over thermal reservoirs and the energies of the quantum working medium. Although superconducting circuits enable accurate engineering of controlled quantum systems, they have not yet been employed to experimentally realize a cyclic quantum heat engine. Here, we demonstrate a quantum heat engine with superconducting circuits, using a quantum-circuit refrigerator as a tunable heat reservoir and a flux-tunable transmon qubit as the working medium. Starting from a thermal state, we implement a few quantum Otto cycles with a tailored reservoir drive inducing sequential cooling and heating, interleaved with flux ramps controlling qubit frequency. Utilizing single-shot qubit readout, we monitor the qubit state evolution during the cycles and measure positive output powers and efficiencies, agreeing with corresponding simulations. Our results verify thermodynamic models of quantum heat engines, advance control of thermal environments, and open avenues for exploring possible quantum advantages.

arXiv:2502.20143•Nature Communications•May 5, 2026•31 citations

Cooling performance in Markovian vs non-Markovian quantum collisional models

Swastik Srivastava

This paper compares the cooling performance of Markovian and non-Markovian quantum collisional models for nanoscale thermodynamic devices. A minimal setup is considered: a single qubit system repeatedly collides with qubit ancillas acting as a heat bath, while a local cooling “demon” operates on the system after each collision. Two regimes are analyzed: (i) a Markovian protocol where the system interacts with a fresh thermal ancilla at every step and the ancilla is subsequently rethermalized, and (ii) a non-Markovian protocol where the system repeatedly interacts with the same initially thermal environment qubit with no reset, allowing correlations (memory) to build up. A central contribution is an efficiency definition that explicitly includes all external energetic resources, counting both the energy removed by the demon and the otherwise hidden work cost of rethermalizing the ancillas in the Markovian implementation. The demon is modeled as an amplitude damping channel; via an explicit Stinespring dilation, the extracted energy is interpreted as heat dumped into an auxiliary cold reservoir, and the paper discusses how additional demon memory/erasure (Landauer) costs would further reduce operational efficiency. Numerical simulations show that the non-Markovian protocol can cool the system to much lower final energies and achieve substantially higher efficiency than the Markovian protocol across a wide range of collision (coupling) and damping strengths. The enhancement is traced to the finite environment’s initial energy and its capacity to store correlations as usable thermodynamic resources. The results emphasize that bounds and benchmarks derived under Markovian assumptions may significantly underestimate performance in finite, memoryful environments, and that reported efficiencies should be interpreted as upper bounds when demon implementation costs are not fully modeled.

•Mar 7, 2026•0 citations

Geometric properties of adiabatic quantum thermal machines

Bibek Bhandari, Pablo Terrén Alonso, Fabio Taddei +3 more

A quantum thermal machine can be controlled by time-periodic perturbations that define a cycle, as in conventional macroscopic thermal machines. This paper presents a general and unified approach to the study of quantum thermal machines, including both heat engines and refrigerators, which operate under periodic adiabatic driving and are in contact with thermal reservoirs kept at different temperatures. Importantly, many observables characterizing the operation and the performance of these machines are geometric in nature.

arXiv:2002.02225•Physical review. B./Physical review. B•Oct 8, 2020•70 citations
Geometric heat pumping is the transfer of energy between reservoirs at equal temperature where the heat exchanged in an adiabatic cycle depends only on the driving contour in parameter space. We implement this mechanism on a superconducting quantum processor using a collision model, where a driven qubit interacts repeatedly with two ancilla qubits that are prepared in thermal states and emulate the reservoirs. Energy measurements before and after each interaction provide a calorimetric record of the heat exchanged with each reservoir. By reversing the driving contour, we extract a heat contribution associated with pumping. Its dependence on the period and on the contour follows exact simulations of the collision model, without adjustable parameters, and approaches in the slow-driving regime the geometric limit of the corresponding Lindblad dynamics.
Can cyclic driving transfer heat between equal-temperature reservoirs with a contribution determined by the driving contour rather than its speed? This paper implements a driven-qubit model of geometric heat pumping on a superconducting quantum processor, distinguishing the pumping signal from dissipative heating.
A working qubit interacts with two repeatedly reset thermal ancillas through energy-conserving partial swaps. Modulating its level splitting and relative reservoir couplings defines a closed contour; ancilla energy measurements before and after each collision provide calorimetric heat records. The implementation uses three qubits on IBM’s Heron r2 processor, with 48 cells, 384 CZ gates, approximately 690 μs690\,\mu\mathrm{s}690μs execution time, and 3,000 shots per circuit, without error mitigation or readout correction.
Half the heat difference between opposite contour orientations isolates an orientation-odd contribution. Its measured period and contour-width dependence is compared with exact collision-model simulations without fitted parameters. The model approaches Lindblad dynamics and, under slow driving, Qα=Qαgeo+Cα/T+O(T−2)Q_\alpha=Q_\alpha^{\rm geo}+\mathcal C_\alpha/\mathcal T+O(\mathcal T^{-2})Qα​=Qαgeo​+Cα​/T+O(T−2), with opposite geometric heats in the two reservoirs. For the principal contour, the predicted geometric magnitude is approximately 0.334T0.334T0.334T; expanding the contour across the first quadrant approaches the theoretical bound Tln⁡2T\ln2Tln2. Measurements show oppositely signed odd heats and a signal consistent with zero for zero enclosed area.
Processor noise produces heating larger than the pumped contribution, preventing net cooling. Orientation subtraction removes the even background only from the estimator, not physically; residual orientation-odd noise attenuates the measured slow-driving signal below the geometric prediction.
We present a detailed analysis of slowly driven quantum thermal machines based on interacting qubits within the framework of the Lindblad master equation. By implementing a systematic expansion in the driving rate, we derive explicit expressions for the rate of work of the driving forces, the heat currents exchanged with the reservoirs, and the entropy production up to second order, ensuring full thermodynamic consistency in the linear-response regime. The formalism naturally separates geometric and dissipative contributions, identified by a Berry curvature and a metric in parameter space, respectively. Analytical results show that the geometric heat pumped per cycle is bounded by kBTNqln⁡2k_B T N_q \ln 2kB​TNq​ln2 for NqN_qNq​ non-interacting qubits, in direct analogy with the Landauer limit for entropy change. This bound can be surpassed when qubit interactions and asymmetric couplings to the baths are introduced. Numerical results for the interacting two-qubit system reveal a non-trivial role of the interaction between qubits and the coupling between the qubits and the baths in the behavior of the dissipated power. The approach provides a general platform for studying dissipation, pumping, and performance optimization in driven quantum devices operating as heat engines.
We adopt a geometric approach to describe the performance of adiabatic quantum machines, operating under slow time-dependent driving and in contact with two reservoirs with a temperature bias during all the cycle.We show that the problem of optimizing the power generation of a heat engine and the efficiency of both the heat engine and refrigerator operational modes is reduced to an isoperimetric problem with nontrivial underlying metrics and curvature.This corresponds to the maximization of the ratio between the area enclosed by a closed curve and its corresponding length.We illustrate this procedure in a qubit coupled to two reservoirs operating as a thermal machine by means of an adiabatic protocol.
We present an overview of recent advances in the study of energy dynamics and mechanisms for energy conversion in qubit systems with special focus on realizations in superconducting quantum circuits. We briefly introduce the relevant theoretical framework to analyze heat generation, energy transport and energy conversion in these systems with and without time-dependent driving considering the effect of equilibrium and non-equilibrium environments. We analyze specific problems and mechanisms under current investigation in the context of qubit systems. These include the problem of energy dissipation and possible routes for its control, energy pumping between driving sources and heat pumping between reservoirs, implementation of thermal machines and mechanisms for energy storage. We highlight the underlying fundamental phenomena related to geometrical and topological properties, as well as many-body correlations. We also present an overview of recent experimental activity in this field.
Quantum heat engines require precise control over thermal reservoirs and the energies of the quantum working medium. Although superconducting circuits enable accurate engineering of controlled quantum systems, they have not yet been employed to experimentally realize a cyclic quantum heat engine. Here, we demonstrate a quantum heat engine with superconducting circuits, using a quantum-circuit refrigerator as a tunable heat reservoir and a flux-tunable transmon qubit as the working medium. Starting from a thermal state, we implement a few quantum Otto cycles with a tailored reservoir drive inducing sequential cooling and heating, interleaved with flux ramps controlling qubit frequency. Utilizing single-shot qubit readout, we monitor the qubit state evolution during the cycles and measure positive output powers and efficiencies, agreeing with corresponding simulations. Our results verify thermodynamic models of quantum heat engines, advance control of thermal environments, and open avenues for exploring possible quantum advantages.
This paper compares the cooling performance of Markovian and non-Markovian quantum collisional models for nanoscale thermodynamic devices. A minimal setup is considered: a single qubit system repeatedly collides with qubit ancillas acting as a heat bath, while a local cooling “demon” operates on the system after each collision. Two regimes are analyzed: (i) a Markovian protocol where the system interacts with a fresh thermal ancilla at every step and the ancilla is subsequently rethermalized, and (ii) a non-Markovian protocol where the system repeatedly interacts with the same initially thermal environment qubit with no reset, allowing correlations (memory) to build up. A central contribution is an efficiency definition that explicitly includes all external energetic resources, counting both the energy removed by the demon and the otherwise hidden work cost of rethermalizing the ancillas in the Markovian implementation. The demon is modeled as an amplitude damping channel; via an explicit Stinespring dilation, the extracted energy is interpreted as heat dumped into an auxiliary cold reservoir, and the paper discusses how additional demon memory/erasure (Landauer) costs would further reduce operational efficiency. Numerical simulations show that the non-Markovian protocol can cool the system to much lower final energies and achieve substantially higher efficiency than the Markovian protocol across a wide range of collision (coupling) and damping strengths. The enhancement is traced to the finite environment’s initial energy and its capacity to store correlations as usable thermodynamic resources. The results emphasize that bounds and benchmarks derived under Markovian assumptions may significantly underestimate performance in finite, memoryful environments, and that reported efficiencies should be interpreted as upper bounds when demon implementation costs are not fully modeled.
A quantum thermal machine can be controlled by time-periodic perturbations that define a cycle, as in conventional macroscopic thermal machines. This paper presents a general and unified approach to the study of quantum thermal machines, including both heat engines and refrigerators, which operate under periodic adiabatic driving and are in contact with thermal reservoirs kept at different temperatures. Importantly, many observables characterizing the operation and the performance of these machines are geometric in nature.