Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.01100

Gate Dispersive Charge Detection in Ge/SiGe Quantum Dots

Mukhlasur Rahman Tanvir, Ebrahim Sajadi, Menno Veldhorst, Giordano Scappucci, Joe Salfi

Published Oct 1, 2026• 0 citations
arXivHTMLPDF

Abstract

Spin qubits are an attractive platform for scalable quantum computation, and recently, laterally gated quantum dots (QDs) in Ge heterostructures have emerged as a leading implementation. Radio-frequency (RF) single-hole transistor (SHT) spin readout and integrated superconducting resonator charge readout have demonstrated in Ge QDs, but their wiring overhead and on-chip size can pose challenges, while gate dispersive (GD) readout, which requires less on-chip overhead, has yet to be demonstrated for Ge QDs. Here we demonstrate compact, low-overhead RF-GD charge readout of a Ge double QD (DQD), both directly, and assisted by a proximal single-hole box (SHB). We resolve QD loading and interdot transitions with both techniques. We obtain unity signal-to-noise ratio (SNR) in 2.7 millisecond and 135 microsecond integration time, for gate-dispersive detection of the DQD and SHB-DQD systems, respectively. We find that the SHB enhances the interdot signal-to-noise ratio (SNR) of our 540 MHz circuit by a factor of 20 for a DQD coupling $t_c \approx 5$ GHz. Power and temperature dependent measurements verify that SNR is limited by dielectric loss. We argue that with achievable improvements in dielectric loss and amplification, high-fidelity (99\%) readout in less than 1 microsecond should be possible, assuming ideal spin-to-charge conversion, which has seen rapid recent progress. These results establish a simple and compact gate-based readout approach for direct and SHB-enhanced readout of Ge heterostructure QDs.

DOI
10.48550/arxiv.2610.01100

Related papers

Resonator-based Hole Spin Qubit Readout

Eoin G. Kelly

Spin qubits in gate-defined semiconductor quantum dots are a promising platform for realising a scalable quantum computer. This platform encodes quantum information into the intrinsic angular momentum (spin) of individual electrons or holes. In particular, hole spins in quantum dots enable the possibility of all-electrical spin control due to their intrinsic spin-orbit coupling. One important criterion of a quantum computer is the ability to reliably read out the state of the qubit. This is done by mapping spin information to the charge degree of freedom, combined with a method for charge detection. Charge detection can be facilitated by coupling a resonator directly to the quantum dot gate or to a charge sensor and measuring the resonator's phase or amplitude response. In this thesis, we describe a set of experiments relating to the implementation of hole spin qubit readout with superconducting resonators. First, we study gate-based charge sensing in a Si fin field-effect transistor (finFET) device using a superconducting NbN nanowire resonator. We find that the resonator amplifies capacitive crosstalk when electrical control pulses are applied to gate electrodes in this device. This occurs whenever a spectral component of qubit control pulses overlaps with the resonance frequency, which we show may occur for both baseband and radio-frequency (RF) drive signals. We quantify this crosstalk in a transport-based method, and attribute its source to the capacitance between the bondpads of neighbouring gate electrodes. In a second experiment, we use an RF charge sensor with the same nanowire technology to read out hole spin qubits formed in the quantum well of a Ge/SiGe heterostructure. A screening layer approach is used to facilitate RF matching due to large RF dissipation found in the heterostructure. We implement a double-latched readout scheme in this system to reduce errors arising from both spin and charge decay during readout. The spin-to-charge conversion process and its dependence on magnetic field orientation is studied. Spin and charge decay processes arising after spin-to-charge conversion are mitigated by choosing an optimal working point for the field orientation, field amplitude and readout pulse times. By doing so, we achieve an average single-shot state-preparation-and-measurement fidelity of 97%, primarily bounded by imperfect state preparation and limited signal-to-noise ratio. Finally, we study coplanar waveguide resonators fabricated from NbN. We investigate the feasibility of integrating this type of resonator onto the same chip as the Si finFET quantum dots. We then develop a novel resonator readout technique by the interference of two microwave sidebands. We demonstrate the insensitivity of this technique to common-mode phase and amplitude noise both theoretically and experimentally. This technique is then used to study resonator noise arising from two-level system defects. These results highlight both the practical constraints and the potential for achieving high readout fidelities using resonator-based hole spin qubit readout. This work establishes a blueprint for mitigating resonator-induced crosstalk and enabling high-fidelity readout in lossy materials by incorporating a screening layer.

•Jan 1, 2025•0 citations

Radio frequency single electron transmission spectroscopy of a semiconductor Si/SiGe quantum dot

Imri Fattal, Jacques Van Damme, Bart Raes +14 more

Rapid single shot spin readout is a key ingredient for fault tolerant quantum computing with spin qubits. An RF-SET (radio-frequency single electron transistor) is predominantly used as its the readout timescale is far shorter than the spin decoherence time. In this work, we experimentally demonstrate a transmission-based RF-SET using a multi-module semiconductor-superconductor assembly. A monolithically integrated SET placed next to a double quantum dot in a Si/SiGe heterostructure is wire-bonded to a superconducting niobium inductor forming the impedance-transforming network. Compared to RF reflectometry, the proposed set-up is experimentally simpler without the need for directional couplers. Read-out performance is benchmarked by the signal-to-noise (SNR) of a dot-reservoir transition (DRT) and an interdot charge transition (ICT) in the double quantum dot near the SET as a function of RF power and integration time. The minimum integration time for unitary SNR is found to be 100 ns for ICT and 300 ns for DRT. The obtained minimum integration times are comparable to the state of the art in conventional RF reflectometry set-ups. Furthermore, we study the turn-on properties of the RF-SET to investigate capacitive shifts and RF losses. Understanding these effects are crucial for further optimisations of the impedance transforming network as well as the device design to assist RF read-out. This new RF read-out scheme also shows promise for multiplexing spin-qubit readout and further studies on rapid charge dynamics in quantum dots.

arXiv:2504.05016•Apr 7, 2025•2 citations

Fast Gate-Based Readout of Silicon Quantum Dots Using Josephson Parametric Amplification

Simon Schaal, I. Ahmed, J. A. Haigh +12 more

Spins in silicon quantum devices are promising candidates for large-scale quantum computing. Gate-based sensing of spin qubits offers a compact and scalable readout with high fidelity, however, further improvements in sensitivity are required to meet the fidelity thresholds and measurement timescales needed for the implementation of fast feedback in error correction protocols. Here, we combine radio-frequency gate-based sensing at 622 MHz with a Josephson parametric amplifier, that operates in the 500-800 MHz band, to reduce the integration time required to read the state of a silicon double quantum dot formed in a nanowire transistor. Based on our achieved signal-to-noise ratio, we estimate that singlet-triplet single-shot readout with an average fidelity of 99.7% could be performed in 1 μs, well below the requirements for fault-tolerant readout and 30 times faster than without the Josephson parametric amplifier. Additionally, the Josephson parametric amplifier allows operation at a lower radio-frequency power while maintaining identical signal-to-noise ratio. We determine a noise temperature of 200 mK with a contribution from the Josephson parametric amplifier (25%), cryogenic amplifier (25%) and the resonator (50%), showing routes to further increase the readout speed.

arXiv:1907.09429•Physical Review Letters•Feb 14, 2020•77 citations

Coherent and ultra-low-power EDSR with a flopping-mode spin qubit in germanium

Alexei Orekhov, Wonjin Jang, Pan Zhang +13 more

Hole spin qubits in semiconductor quantum dots (QDs) enable high-fidelity all-electric control, but conventional electric dipole spin resonance (EDSR) can require substantial rf drive power at the low magnetic fields that are favorable for qubit coherence and readout. In planar Ge hole spin qubits, this can reach -27 dBm at the device, posing challenges for scalable architectures due to heating and crosstalk. Here, we demonstrate a flopping-mode (FM) qubit in Ge, where a single spin is delocalized in a double QD, combining first-order protection against charge noise with exceptionally efficient electric driving. By mapping out coherence sweet-spots as a function of magnetic field orientation we achieve $T_2^*= 1.4μ\mathrm{s}$, $T_2^{\mathrm{Hahn}}= 11.5 μ\mathrm{s}$, $T^{φ, \mathrm{CPMG32}}_2= 130 μ\mathrm{s}$, and $T_1= 226 μ\mathrm{s}$, and a single-qubit gate fidelity of up to 99.76$\%$ for a gate time $t_{Xπ} = 88$ ns. Importantly, these results are obtained at a nearly in-plane magnetic field of 5 mT using only -52 dBm drive power at the device. We further find that qubit relaxation in this regime is consistent with a two-photon Orbach process, providing a route for further optimization. Our results demonstrate that FM-EDSR supports ultra-low-power, high-fidelity single-qubit operations, improvements that could benefit scalable hole-spin-based architectures and hybrid spin-photon interfaces.

cond-mat.mes-hallCross-listedarXiv:2609.20775•Sep 18, 2026

Circuit Quantum Electrodynamics and Spin Qubits with Multi-Hole Quantum Dots in planar Germanium

Franco De Palma

Spin qubits in semiconductor quantum dots constitute one of the leading platforms for quantum information processing, combining long coherence times, high-fidelity gate operations, and compatibility with semiconductor industry technologies. In particular, holes confined in planar Ge/SiGe heterostructures have recently emerged as promising qubit candidates owing to their low effective mass, high mobility, low percolation density, absence of valley states, and strong spin-orbit interaction, which enables fast all-electrical spin control. At the same time, spin-orbit interaction also gives rise to a highly anisotropic and electrically tunable gyromagnetic response. Understanding and controlling this response is therefore essential for high-fidelity single- and multi-qubit operations. The realization of scalable quantum processors also requires efficient qubit readout and long-range connectivity. Circuit quantum electrodynamics (cQED), based on the coupling between artificial atoms and microwave photons confined in superconducting resonators, provides a natural framework to address these challenges. However, the implementation of hybrid semiconductor-superconductor devices in planar Ge has so far been hindered by large microwave losses originating from the heterostructure. In this thesis, we demonstrate, for the first time in planar Ge, strong coupling between a hole charge qubit in a double quantum dot and a high-impedance microwave resonator, reaching a cooperativity of C â 100. In addition, we leverage the frequency tunability of the resonator to perform detailed spectroscopy of a multi-level energy spectrum of low-lying states arising from strong Coulomb-correlation effects. To further improve the quality of the hole-photon interface, we investigate the source of microwave losses in different Ge/SiGe heterostructures, identifying defects at the lattice-mismatched Si/Ge interface as the dominant source of resonator losses in reverse-graded heterostructures. To mitigate this limitation, a deep tapered-etching approach is introduced, enabling the fabrication of superconducting resonators directly on etched heterostructures. This method yields internal quality factors exceeding Qint > 10 000 for high-impedance Josephson junction array resonators and Qint > 100 000 for 50 â Nb resonators. Finally, this thesis explores the spin properties of multi-hole quantum dots beyond the conventional single-orbital picture. By reconstructing and electrically tuning the g tensors of holes confined in different orbital states, we show that confinement can substantially modify both their magnitude and orientation. These results open new opportunities for engineering qubit properties through orbital occupation. Furthermore, highly coherent singlet-triplet oscillations are demonstrated in the seven-hole regime, yielding a quality factor of approximately 330 at in-plane magnetic fields as low as 2.5 mT. Together, these results establish a foundation for high-fidelity hole-spin-qubit operation based on g-tensor engineering and for the integration of planar Ge quantum dots with superconducting quantum circuits.

•Jan 1, 2026•0 citations

3D integration of a hybrid quantum dot circuit-QED device for fast gate dispersive charge readout and coherent spin-photon coupling

Sebastien Granel, F. Gustavo, Jean-Luc Thomassin +8 more

Hybrid circuit quantum electrodynamics (cQED) aims at coupling various quantum degrees of freedom, among which are spin and charge degrees of freedom in gate defined quantum dots, phonons or magnons... with quantized electromagnetic fields in superconducting microwave cavities to investigate fundamental physics questions or for quantum computation and simulation. However, low microwave losses, key for many hybrid cQED experiments, are challenging to achieve given the often exotic and/or complex material stacks (e.g. semiconducting material, ferromagnets, or piezoelectric materials) required to host the various quantum degrees of freedom. In this work, we present a 3D-integration process to overcome this challenge for semi-industrial silicon MOS spin qubits. The process is based on dense indium bump interconnects at a pitch of 10 $\mathrmμ$m and superconducting thin films of Niobium Nitride (NbN). First, we report on DC and RF interconnect properties that demonstrate a high galvanic interconnection yield and internal quality factors above $10^{5}$ in the single photon regime for NbN resonators interrupted by a single indium bump interconnect. Eventually, we fabricated a 3D-integrated hybrid circuit quantum electrodynamics (cQED) device based on a semi-industrial MOS hole double quantum dot and a high impedance NbN resonator. For this device, we report a cavity internal quality factor above 10000 and demonstrate record sensitivity for gate-based dispersive readout of the charge degree of freedom with an SNR of 100 in 300 ns. Finally, we demonstrate strong spin-photon coupling of $g_{s}/2π$ = 75 MHz, which highlights the viability of 3D-integration for quantum dot based hybrid spin circuit quantum electrodynamics and opens to high-fidelity spin readout and microwave photon-based remote spin qubit entanglement.

arXiv:2604.25871•Physical Review Applied•Nov 3, 2026•2 citations
Spin qubits are an attractive platform for scalable quantum computation, and recently, laterally gated quantum dots (QDs) in Ge heterostructures have emerged as a leading implementation. Radio-frequency (RF) single-hole transistor (SHT) spin readout and integrated superconducting resonator charge readout have demonstrated in Ge QDs, but their wiring overhead and on-chip size can pose challenges, while gate dispersive (GD) readout, which requires less on-chip overhead, has yet to be demonstrated for Ge QDs. Here we demonstrate compact, low-overhead RF-GD charge readout of a Ge double QD (DQD), both directly, and assisted by a proximal single-hole box (SHB). We resolve QD loading and interdot transitions with both techniques. We obtain unity signal-to-noise ratio (SNR) in 2.7 millisecond and 135 microsecond integration time, for gate-dispersive detection of the DQD and SHB-DQD systems, respectively. We find that the SHB enhances the interdot signal-to-noise ratio (SNR) of our 540 MHz circuit by a factor of 20 for a DQD coupling tc≈5t_c \approx 5tc​≈5 GHz. Power and temperature dependent measurements verify that SNR is limited by dielectric loss. We argue that with achievable improvements in dielectric loss and amplification, high-fidelity (99%) readout in less than 1 microsecond should be possible, assuming ideal spin-to-charge conversion, which has seen rapid recent progress. These results establish a simple and compact gate-based readout approach for direct and SHB-enhanced readout of Ge heterostructure QDs.
Spin qubits in gate-defined semiconductor quantum dots are a promising platform for realising a scalable quantum computer. This platform encodes quantum information into the intrinsic angular momentum (spin) of individual electrons or holes. In particular, hole spins in quantum dots enable the possibility of all-electrical spin control due to their intrinsic spin-orbit coupling. One important criterion of a quantum computer is the ability to reliably read out the state of the qubit. This is done by mapping spin information to the charge degree of freedom, combined with a method for charge detection. Charge detection can be facilitated by coupling a resonator directly to the quantum dot gate or to a charge sensor and measuring the resonator's phase or amplitude response. In this thesis, we describe a set of experiments relating to the implementation of hole spin qubit readout with superconducting resonators. First, we study gate-based charge sensing in a Si fin field-effect transistor (finFET) device using a superconducting NbN nanowire resonator. We find that the resonator amplifies capacitive crosstalk when electrical control pulses are applied to gate electrodes in this device. This occurs whenever a spectral component of qubit control pulses overlaps with the resonance frequency, which we show may occur for both baseband and radio-frequency (RF) drive signals. We quantify this crosstalk in a transport-based method, and attribute its source to the capacitance between the bondpads of neighbouring gate electrodes. In a second experiment, we use an RF charge sensor with the same nanowire technology to read out hole spin qubits formed in the quantum well of a Ge/SiGe heterostructure. A screening layer approach is used to facilitate RF matching due to large RF dissipation found in the heterostructure. We implement a double-latched readout scheme in this system to reduce errors arising from both spin and charge decay during readout. The spin-to-charge conversion process and its dependence on magnetic field orientation is studied. Spin and charge decay processes arising after spin-to-charge conversion are mitigated by choosing an optimal working point for the field orientation, field amplitude and readout pulse times. By doing so, we achieve an average single-shot state-preparation-and-measurement fidelity of 97%, primarily bounded by imperfect state preparation and limited signal-to-noise ratio. Finally, we study coplanar waveguide resonators fabricated from NbN. We investigate the feasibility of integrating this type of resonator onto the same chip as the Si finFET quantum dots. We then develop a novel resonator readout technique by the interference of two microwave sidebands. We demonstrate the insensitivity of this technique to common-mode phase and amplitude noise both theoretically and experimentally. This technique is then used to study resonator noise arising from two-level system defects. These results highlight both the practical constraints and the potential for achieving high readout fidelities using resonator-based hole spin qubit readout. This work establishes a blueprint for mitigating resonator-induced crosstalk and enabling high-fidelity readout in lossy materials by incorporating a screening layer.
Rapid single shot spin readout is a key ingredient for fault tolerant quantum computing with spin qubits. An RF-SET (radio-frequency single electron transistor) is predominantly used as its the readout timescale is far shorter than the spin decoherence time. In this work, we experimentally demonstrate a transmission-based RF-SET using a multi-module semiconductor-superconductor assembly. A monolithically integrated SET placed next to a double quantum dot in a Si/SiGe heterostructure is wire-bonded to a superconducting niobium inductor forming the impedance-transforming network. Compared to RF reflectometry, the proposed set-up is experimentally simpler without the need for directional couplers. Read-out performance is benchmarked by the signal-to-noise (SNR) of a dot-reservoir transition (DRT) and an interdot charge transition (ICT) in the double quantum dot near the SET as a function of RF power and integration time. The minimum integration time for unitary SNR is found to be 100 ns for ICT and 300 ns for DRT. The obtained minimum integration times are comparable to the state of the art in conventional RF reflectometry set-ups. Furthermore, we study the turn-on properties of the RF-SET to investigate capacitive shifts and RF losses. Understanding these effects are crucial for further optimisations of the impedance transforming network as well as the device design to assist RF read-out. This new RF read-out scheme also shows promise for multiplexing spin-qubit readout and further studies on rapid charge dynamics in quantum dots.
Spins in silicon quantum devices are promising candidates for large-scale quantum computing. Gate-based sensing of spin qubits offers a compact and scalable readout with high fidelity, however, further improvements in sensitivity are required to meet the fidelity thresholds and measurement timescales needed for the implementation of fast feedback in error correction protocols. Here, we combine radio-frequency gate-based sensing at 622 MHz with a Josephson parametric amplifier, that operates in the 500-800 MHz band, to reduce the integration time required to read the state of a silicon double quantum dot formed in a nanowire transistor. Based on our achieved signal-to-noise ratio, we estimate that singlet-triplet single-shot readout with an average fidelity of 99.7% could be performed in 1 μs, well below the requirements for fault-tolerant readout and 30 times faster than without the Josephson parametric amplifier. Additionally, the Josephson parametric amplifier allows operation at a lower radio-frequency power while maintaining identical signal-to-noise ratio. We determine a noise temperature of 200 mK with a contribution from the Josephson parametric amplifier (25%), cryogenic amplifier (25%) and the resonator (50%), showing routes to further increase the readout speed.
Hole spin qubits in semiconductor quantum dots (QDs) enable high-fidelity all-electric control, but conventional electric dipole spin resonance (EDSR) can require substantial rf drive power at the low magnetic fields that are favorable for qubit coherence and readout. In planar Ge hole spin qubits, this can reach -27 dBm at the device, posing challenges for scalable architectures due to heating and crosstalk. Here, we demonstrate a flopping-mode (FM) qubit in Ge, where a single spin is delocalized in a double QD, combining first-order protection against charge noise with exceptionally efficient electric driving. By mapping out coherence sweet-spots as a function of magnetic field orientation we achieve T2∗=1.4μsT_2^*= 1.4μ\mathrm{s}T2∗​=1.4μs, T2Hahn=11.5μsT_2^{\mathrm{Hahn}}= 11.5 μ\mathrm{s}T2Hahn​=11.5μs, T2φ,CPMG32=130μsT^{φ, \mathrm{CPMG32}}_2= 130 μ\mathrm{s}T2φ,CPMG32​=130μs, and T1=226μsT_1= 226 μ\mathrm{s}T1​=226μs, and a single-qubit gate fidelity of up to 99.76%\%% for a gate time tXπ=88t_{Xπ} = 88tXπ​=88 ns. Importantly, these results are obtained at a nearly in-plane magnetic field of 5 mT using only -52 dBm drive power at the device. We further find that qubit relaxation in this regime is consistent with a two-photon Orbach process, providing a route for further optimization. Our results demonstrate that FM-EDSR supports ultra-low-power, high-fidelity single-qubit operations, improvements that could benefit scalable hole-spin-based architectures and hybrid spin-photon interfaces.
Spin qubits in semiconductor quantum dots constitute one of the leading platforms for quantum information processing, combining long coherence times, high-fidelity gate operations, and compatibility with semiconductor industry technologies. In particular, holes confined in planar Ge/SiGe heterostructures have recently emerged as promising qubit candidates owing to their low effective mass, high mobility, low percolation density, absence of valley states, and strong spin-orbit interaction, which enables fast all-electrical spin control. At the same time, spin-orbit interaction also gives rise to a highly anisotropic and electrically tunable gyromagnetic response. Understanding and controlling this response is therefore essential for high-fidelity single- and multi-qubit operations. The realization of scalable quantum processors also requires efficient qubit readout and long-range connectivity. Circuit quantum electrodynamics (cQED), based on the coupling between artificial atoms and microwave photons confined in superconducting resonators, provides a natural framework to address these challenges. However, the implementation of hybrid semiconductor-superconductor devices in planar Ge has so far been hindered by large microwave losses originating from the heterostructure. In this thesis, we demonstrate, for the first time in planar Ge, strong coupling between a hole charge qubit in a double quantum dot and a high-impedance microwave resonator, reaching a cooperativity of C â 100. In addition, we leverage the frequency tunability of the resonator to perform detailed spectroscopy of a multi-level energy spectrum of low-lying states arising from strong Coulomb-correlation effects. To further improve the quality of the hole-photon interface, we investigate the source of microwave losses in different Ge/SiGe heterostructures, identifying defects at the lattice-mismatched Si/Ge interface as the dominant source of resonator losses in reverse-graded heterostructures. To mitigate this limitation, a deep tapered-etching approach is introduced, enabling the fabrication of superconducting resonators directly on etched heterostructures. This method yields internal quality factors exceeding Qint > 10 000 for high-impedance Josephson junction array resonators and Qint > 100 000 for 50 â Nb resonators. Finally, this thesis explores the spin properties of multi-hole quantum dots beyond the conventional single-orbital picture. By reconstructing and electrically tuning the g tensors of holes confined in different orbital states, we show that confinement can substantially modify both their magnitude and orientation. These results open new opportunities for engineering qubit properties through orbital occupation. Furthermore, highly coherent singlet-triplet oscillations are demonstrated in the seven-hole regime, yielding a quality factor of approximately 330 at in-plane magnetic fields as low as 2.5 mT. Together, these results establish a foundation for high-fidelity hole-spin-qubit operation based on g-tensor engineering and for the integration of planar Ge quantum dots with superconducting quantum circuits.
Hybrid circuit quantum electrodynamics (cQED) aims at coupling various quantum degrees of freedom, among which are spin and charge degrees of freedom in gate defined quantum dots, phonons or magnons... with quantized electromagnetic fields in superconducting microwave cavities to investigate fundamental physics questions or for quantum computation and simulation. However, low microwave losses, key for many hybrid cQED experiments, are challenging to achieve given the often exotic and/or complex material stacks (e.g. semiconducting material, ferromagnets, or piezoelectric materials) required to host the various quantum degrees of freedom. In this work, we present a 3D-integration process to overcome this challenge for semi-industrial silicon MOS spin qubits. The process is based on dense indium bump interconnects at a pitch of 10 μ\mathrmμμm and superconducting thin films of Niobium Nitride (NbN). First, we report on DC and RF interconnect properties that demonstrate a high galvanic interconnection yield and internal quality factors above 10510^{5}105 in the single photon regime for NbN resonators interrupted by a single indium bump interconnect. Eventually, we fabricated a 3D-integrated hybrid circuit quantum electrodynamics (cQED) device based on a semi-industrial MOS hole double quantum dot and a high impedance NbN resonator. For this device, we report a cavity internal quality factor above 10000 and demonstrate record sensitivity for gate-based dispersive readout of the charge degree of freedom with an SNR of 100 in 300 ns. Finally, we demonstrate strong spin-photon coupling of gs/2πg_{s}/2πgs​/2π = 75 MHz, which highlights the viability of 3D-integration for quantum dot based hybrid spin circuit quantum electrodynamics and opens to high-fidelity spin readout and microwave photon-based remote spin qubit entanglement.