Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1907.09429 · Physical Review Letters

Fast Gate-Based Readout of Silicon Quantum Dots Using Josephson Parametric Amplification

Simon Schaal, I. Ahmed, J. A. Haigh, Louis Hutin, Benoît Bertrand, Sylvain Barraud, M. Vinet, C.-M. Lee, Nadia A. Stelmashenko, Jason W. A. Robinson, Jack Y. Qiu, Shay Hacohen-Gourgy, Irfan A. Siddiqi, M. Fernando González-Zalba, John J. L. Morton

Published Feb 14, 2020• 77 citations
arXivHTMLPDF

Abstract

Spins in silicon quantum devices are promising candidates for large-scale quantum computing. Gate-based sensing of spin qubits offers a compact and scalable readout with high fidelity, however, further improvements in sensitivity are required to meet the fidelity thresholds and measurement timescales needed for the implementation of fast feedback in error correction protocols. Here, we combine radio-frequency gate-based sensing at 622 MHz with a Josephson parametric amplifier, that operates in the 500-800 MHz band, to reduce the integration time required to read the state of a silicon double quantum dot formed in a nanowire transistor. Based on our achieved signal-to-noise ratio, we estimate that singlet-triplet single-shot readout with an average fidelity of 99.7% could be performed in 1 μs, well below the requirements for fault-tolerant readout and 30 times faster than without the Josephson parametric amplifier. Additionally, the Josephson parametric amplifier allows operation at a lower radio-frequency power while maintaining identical signal-to-noise ratio. We determine a noise temperature of 200 mK with a contribution from the Josephson parametric amplifier (25%), cryogenic amplifier (25%) and the resonator (50%), showing routes to further increase the readout speed.

DOI
10.1103/physrevlett.124.067701

Related papers

Broadband parametric amplification for multiplexed SiMOS quantum dot signals

Victor El-Homsy, Luca Planat, David J. Niegemann +14 more

Spins in semiconductor quantum dots hold great promise as building blocks of quantum processors. Trapping them in Si MOS transistorlike devices eases future industrial-scale fabrication. Among the potentially scalable readout solutions, gate-based dispersive radio-frequency reflectometry only requires the already existing transistor gates to read a quantum dot state, which alleviates the need for additional elements. In this effort toward scalability, traveling-wave superconducting parametric amplifiers significantly enhance the readout signal-to-noise ratio (SNR) by reducing the noise below that of typical cryogenic low-noise amplifiers, while offering a broad amplification band, essential to multiplex the readout of multiple resonators. In this work, we demonstrate a 3-GHz gate-based reflectometry readout of electron charge states trapped in quantum dots formed in Si MOS multigate devices, with SNR enhanced due to a Josephson traveling-wave parametric amplifier (JTWPA). The broad tunable 2-GHz amplification bandwidth combined with more than 10-dB ON-OFF SNR improvement of the JTWPA enables frequency and time-division-multiplexed readout of interdot transitions, and noise performance consistent with JTWPA characteristics at higher frequencies. In addition, owing to a design without superconducting loops and with a metallic ground plane, the JTWPA is flux insensitive and shows stable performance up to a magnetic field of 1.1 T at the quantum dot device, compatible with standard Si MOS spin-qubit experiments.

arXiv:2307.14717•Physical Review Applied•Aug 28, 2025•12 citations

Scalable and high-sensitivity readout of silicon quantum devices

Simon Schaal

Quantum computing is predicted to provide unprecedented enhancements in computational power. A quantum computer requires implementation of a well-defined and controlled quantum system of many interconnected qubits, each defined using fragile quantum states. The interest in a spin-based quantum computer in silicon stems from demonstrations of very long spin-coherence times, high-fidelity single spin control and compatibility with industrial mass-fabrication. Industrial scale fabrication of the silicon platform offers a clear route towards a large-scale quantum computer, however, some of the processes and techniques employed in qubit demonstrators are incompatible with a dense and foundry-fabricated architecture. In particular, spin-readout utilises external sensors that require nearly the same footprint as qubit devices. In this thesis, improved readout techniques for silicon quantum devices are presented and routes towards implementation of a scalable and high-sensitivity readout architecture are investigated. Firstly, readout sensitivity of compact gate-based sensors is improved using a high-quality factor resonator and Josephson parametric amplifier that are fabricated separately from quantum dots. Secondly, an integrated transistor-based control circuit is presented using which sequential readout of two quantum dot devices using the same gate-based sensor is achieved. Finally, a large-scale readout architecture based on random-access and frequency multiplexing is introduced. The impact of readout circuit footprint on readout sensitivity is determined, showing routes towards integration of conventional circuits with quantum devices in a dense architecture, and a fault-tolerant architecture based on mediated exchange is introduced, capable of relaxing the limitations on available control circuit footprint per qubit. Demonstrations are based on foundry-fabricated transistors and few-electron quantum dots, showing that industry fabrication is a viable route towards quantum computation at a scale large enough to begin addressing the most challenging computational problems.

•Jan 28, 2020•0 citations

Sensitive radiofrequency readout of quantum dots using an ultra-low-noise SQUID amplifier

F. J. Schupp, Florian Vigneau, Y. Wen +12 more

Fault-tolerant spin-based quantum computers will require fast and accurate qubit read out. This can be achieved using radiofrequency reflectometry given sufficient sensitivity to the change in quantum capacitance associated with the qubit states. Here, we demonstrate a 23-fold improvement in capacitance sensitivity by supplementing a cryogenic semiconductor amplifier with a SQUID preamplifier. The SQUID amplifier operates at a frequency near 200 MHz and achieves a noise temperature below 600 mK when integrated into a reflectometry circuit, which is within a factor 120 of the quantum limit. It enables a record sensitivity to capacitance of 0.07aF/Hz. The setup is used to acquire charge stability diagrams of a gate-defined double quantum dot in a short time with a signal-to-noise ration of about 38 in 1μs of integration time.

arXiv:1810.05767•Journal of Applied Physics•Jun 28, 2020•31 citations

Fast Charge Sensing of a Cavity-Coupled Double Quantum Dot Using a Josephson Parametric Amplifier

J. Stehlik, Y.-Y. Liu, C. M. Quintana +3 more

Double quantum dots (DQDs), sometimes referred to as ``artificial molecules'', are highly controllable quantum systems that serve as building blocks for spin-based quantum computation. A fast, high-fidelity charge sensor is needed for determining the number of electrons trapped in the DQD, and for spin-state readout. Here the authors integrate a Josephson parametric amplifier into the readout chain, improving the signal to noise ratio by a factor of 2000 and enabling live tuning of the DQD potential well, without the slow, painstaking adjustment of voltages on several electrodes.

arXiv:1502.01283•Physical Review Applied•Jul 27, 2015•124 citations

Improving the Readout of Semiconducting Qubits

Matthew Curry

Semiconducting qubits are a promising platform for quantum computers. In particular, silicon spin qubits have made a number of advancements recently including long coherence times, high-fidelity single-qubit gates, two-qubit gates, and high-fidelity readout. However, all operations likely require improvement in fidelity and speed, if possible, to realize a quantum computer. Readout fidelity and speed, in general, are limited by circuit challenges centered on extracting low signal from a device in a dilution refrigerator connected to room temperature amplifiers by long coaxial cables with relatively high capacitance. Readout fidelity specifically is limited by the time it takes to reliably distinguish qubit states relative to the characteristic decay time of the excited state, T1. This dissertation explores the use of heterojunction bipolar transistor (HBT) circuits to amplify the readout signal of silicon spin qubits at cryogenic temperatures. The cryogenic amplification approach has numerous advantages including low implementation overhead, low power relative to the available cooling power, and high signal gain at the mixing chamber stage leading to around a factor of ten speedup in readout time for a similar signal-to-noise ratio. The faster readout time generally increases fidelity, since it is much faster than the T1 time. Two HBT amplification circuits have been designed and characterized. One design is a low-power, base-current biased configuration with non-linear gain (CB-HBT), and the second is a linear-gain, AC-coupled configuration (AC-HBT). They can operate at powers of 1 and 10 μW, respectfully, and not significantly heat electrons. The noise spectral density referred to the input for both circuits is around 15 to 30 fA/√Hz, which is low compared to previous cases such as the dual-stage, AC-coupled HEMT circuit at ~ 70 fA/√Hz. Both circuits achieve charge sensitivity between 300 and 400 μe/√Hz, which approaches the best alternatives (e.g., RF-SET at ~ 140 μe/√Hz) but with much less implementation overhead. For the single-shot latched charge readout performed, both circuits achieve high-fidelity readout in times < 10 μs with bit error rates < 10-3, which is a great improvement over previous work at > 70 μs. The readout speed-up in principle also reduces the production of errors due to excited state relaxation by a factor of ~ 10. All of these results are possible with relatively simple, low-power transistor circuits which can be mounted close to the qubit device at the mixing chamber stage of the dilution refrigerator.

•Jan 1, 2019•0 citations

Gate Dispersive Charge Detection in Ge/SiGe Quantum Dots

Mukhlasur Rahman Tanvir, Ebrahim Sajadi, Menno Veldhorst +2 more

Spin qubits are an attractive platform for scalable quantum computation, and recently, laterally gated quantum dots (QDs) in Ge heterostructures have emerged as a leading implementation. Radio-frequency (RF) single-hole transistor (SHT) spin readout and integrated superconducting resonator charge readout have demonstrated in Ge QDs, but their wiring overhead and on-chip size can pose challenges, while gate dispersive (GD) readout, which requires less on-chip overhead, has yet to be demonstrated for Ge QDs. Here we demonstrate compact, low-overhead RF-GD charge readout of a Ge double QD (DQD), both directly, and assisted by a proximal single-hole box (SHB). We resolve QD loading and interdot transitions with both techniques. We obtain unity signal-to-noise ratio (SNR) in 2.7 millisecond and 135 microsecond integration time, for gate-dispersive detection of the DQD and SHB-DQD systems, respectively. We find that the SHB enhances the interdot signal-to-noise ratio (SNR) of our 540 MHz circuit by a factor of 20 for a DQD coupling $t_c \approx 5$ GHz. Power and temperature dependent measurements verify that SNR is limited by dielectric loss. We argue that with achievable improvements in dielectric loss and amplification, high-fidelity (99\%) readout in less than 1 microsecond should be possible, assuming ideal spin-to-charge conversion, which has seen rapid recent progress. These results establish a simple and compact gate-based readout approach for direct and SHB-enhanced readout of Ge heterostructure QDs.

arXiv:2610.01100•Oct 1, 2026•0 citations
Spins in silicon quantum devices are promising candidates for large-scale quantum computing. Gate-based sensing of spin qubits offers a compact and scalable readout with high fidelity, however, further improvements in sensitivity are required to meet the fidelity thresholds and measurement timescales needed for the implementation of fast feedback in error correction protocols. Here, we combine radio-frequency gate-based sensing at 622 MHz with a Josephson parametric amplifier, that operates in the 500-800 MHz band, to reduce the integration time required to read the state of a silicon double quantum dot formed in a nanowire transistor. Based on our achieved signal-to-noise ratio, we estimate that singlet-triplet single-shot readout with an average fidelity of 99.7% could be performed in 1 μs, well below the requirements for fault-tolerant readout and 30 times faster than without the Josephson parametric amplifier. Additionally, the Josephson parametric amplifier allows operation at a lower radio-frequency power while maintaining identical signal-to-noise ratio. We determine a noise temperature of 200 mK with a contribution from the Josephson parametric amplifier (25%), cryogenic amplifier (25%) and the resonator (50%), showing routes to further increase the readout speed.
Spins in semiconductor quantum dots hold great promise as building blocks of quantum processors. Trapping them in Si MOS transistorlike devices eases future industrial-scale fabrication. Among the potentially scalable readout solutions, gate-based dispersive radio-frequency reflectometry only requires the already existing transistor gates to read a quantum dot state, which alleviates the need for additional elements. In this effort toward scalability, traveling-wave superconducting parametric amplifiers significantly enhance the readout signal-to-noise ratio (SNR) by reducing the noise below that of typical cryogenic low-noise amplifiers, while offering a broad amplification band, essential to multiplex the readout of multiple resonators. In this work, we demonstrate a 3-GHz gate-based reflectometry readout of electron charge states trapped in quantum dots formed in Si MOS multigate devices, with SNR enhanced due to a Josephson traveling-wave parametric amplifier (JTWPA). The broad tunable 2-GHz amplification bandwidth combined with more than 10-dB ON-OFF SNR improvement of the JTWPA enables frequency and time-division-multiplexed readout of interdot transitions, and noise performance consistent with JTWPA characteristics at higher frequencies. In addition, owing to a design without superconducting loops and with a metallic ground plane, the JTWPA is flux insensitive and shows stable performance up to a magnetic field of 1.1 T at the quantum dot device, compatible with standard Si MOS spin-qubit experiments.
Quantum computing is predicted to provide unprecedented enhancements in computational power. A quantum computer requires implementation of a well-defined and controlled quantum system of many interconnected qubits, each defined using fragile quantum states. The interest in a spin-based quantum computer in silicon stems from demonstrations of very long spin-coherence times, high-fidelity single spin control and compatibility with industrial mass-fabrication. Industrial scale fabrication of the silicon platform offers a clear route towards a large-scale quantum computer, however, some of the processes and techniques employed in qubit demonstrators are incompatible with a dense and foundry-fabricated architecture. In particular, spin-readout utilises external sensors that require nearly the same footprint as qubit devices. In this thesis, improved readout techniques for silicon quantum devices are presented and routes towards implementation of a scalable and high-sensitivity readout architecture are investigated. Firstly, readout sensitivity of compact gate-based sensors is improved using a high-quality factor resonator and Josephson parametric amplifier that are fabricated separately from quantum dots. Secondly, an integrated transistor-based control circuit is presented using which sequential readout of two quantum dot devices using the same gate-based sensor is achieved. Finally, a large-scale readout architecture based on random-access and frequency multiplexing is introduced. The impact of readout circuit footprint on readout sensitivity is determined, showing routes towards integration of conventional circuits with quantum devices in a dense architecture, and a fault-tolerant architecture based on mediated exchange is introduced, capable of relaxing the limitations on available control circuit footprint per qubit. Demonstrations are based on foundry-fabricated transistors and few-electron quantum dots, showing that industry fabrication is a viable route towards quantum computation at a scale large enough to begin addressing the most challenging computational problems.
Fault-tolerant spin-based quantum computers will require fast and accurate qubit read out. This can be achieved using radiofrequency reflectometry given sufficient sensitivity to the change in quantum capacitance associated with the qubit states. Here, we demonstrate a 23-fold improvement in capacitance sensitivity by supplementing a cryogenic semiconductor amplifier with a SQUID preamplifier. The SQUID amplifier operates at a frequency near 200 MHz and achieves a noise temperature below 600 mK when integrated into a reflectometry circuit, which is within a factor 120 of the quantum limit. It enables a record sensitivity to capacitance of 0.07aF/Hz. The setup is used to acquire charge stability diagrams of a gate-defined double quantum dot in a short time with a signal-to-noise ration of about 38 in 1μs of integration time.
Double quantum dots (DQDs), sometimes referred to as ``artificial molecules'', are highly controllable quantum systems that serve as building blocks for spin-based quantum computation. A fast, high-fidelity charge sensor is needed for determining the number of electrons trapped in the DQD, and for spin-state readout. Here the authors integrate a Josephson parametric amplifier into the readout chain, improving the signal to noise ratio by a factor of 2000 and enabling live tuning of the DQD potential well, without the slow, painstaking adjustment of voltages on several electrodes.
Semiconducting qubits are a promising platform for quantum computers. In particular, silicon spin qubits have made a number of advancements recently including long coherence times, high-fidelity single-qubit gates, two-qubit gates, and high-fidelity readout. However, all operations likely require improvement in fidelity and speed, if possible, to realize a quantum computer. Readout fidelity and speed, in general, are limited by circuit challenges centered on extracting low signal from a device in a dilution refrigerator connected to room temperature amplifiers by long coaxial cables with relatively high capacitance. Readout fidelity specifically is limited by the time it takes to reliably distinguish qubit states relative to the characteristic decay time of the excited state, T1. This dissertation explores the use of heterojunction bipolar transistor (HBT) circuits to amplify the readout signal of silicon spin qubits at cryogenic temperatures. The cryogenic amplification approach has numerous advantages including low implementation overhead, low power relative to the available cooling power, and high signal gain at the mixing chamber stage leading to around a factor of ten speedup in readout time for a similar signal-to-noise ratio. The faster readout time generally increases fidelity, since it is much faster than the T1 time. Two HBT amplification circuits have been designed and characterized. One design is a low-power, base-current biased configuration with non-linear gain (CB-HBT), and the second is a linear-gain, AC-coupled configuration (AC-HBT). They can operate at powers of 1 and 10 μW, respectfully, and not significantly heat electrons. The noise spectral density referred to the input for both circuits is around 15 to 30 fA/√Hz, which is low compared to previous cases such as the dual-stage, AC-coupled HEMT circuit at ~ 70 fA/√Hz. Both circuits achieve charge sensitivity between 300 and 400 μe/√Hz, which approaches the best alternatives (e.g., RF-SET at ~ 140 μe/√Hz) but with much less implementation overhead. For the single-shot latched charge readout performed, both circuits achieve high-fidelity readout in times < 10 μs with bit error rates < 10-3, which is a great improvement over previous work at > 70 μs. The readout speed-up in principle also reduces the production of errors due to excited state relaxation by a factor of ~ 10. All of these results are possible with relatively simple, low-power transistor circuits which can be mounted close to the qubit device at the mixing chamber stage of the dilution refrigerator.
Spin qubits are an attractive platform for scalable quantum computation, and recently, laterally gated quantum dots (QDs) in Ge heterostructures have emerged as a leading implementation. Radio-frequency (RF) single-hole transistor (SHT) spin readout and integrated superconducting resonator charge readout have demonstrated in Ge QDs, but their wiring overhead and on-chip size can pose challenges, while gate dispersive (GD) readout, which requires less on-chip overhead, has yet to be demonstrated for Ge QDs. Here we demonstrate compact, low-overhead RF-GD charge readout of a Ge double QD (DQD), both directly, and assisted by a proximal single-hole box (SHB). We resolve QD loading and interdot transitions with both techniques. We obtain unity signal-to-noise ratio (SNR) in 2.7 millisecond and 135 microsecond integration time, for gate-dispersive detection of the DQD and SHB-DQD systems, respectively. We find that the SHB enhances the interdot signal-to-noise ratio (SNR) of our 540 MHz circuit by a factor of 20 for a DQD coupling tc≈5t_c \approx 5tc​≈5 GHz. Power and temperature dependent measurements verify that SNR is limited by dielectric loss. We argue that with achievable improvements in dielectric loss and amplification, high-fidelity (99\%) readout in less than 1 microsecond should be possible, assuming ideal spin-to-charge conversion, which has seen rapid recent progress. These results establish a simple and compact gate-based readout approach for direct and SHB-enhanced readout of Ge heterostructure QDs.