arXiv:2609.38804
Entangling Atomic Quantum Memories Using High-Order Modulated Coherent States
Chaohan Cui, Prajit Dhara, Saikat Guha
Abstract
High-order coherent-state modulation and collective midpoint measurements enable multi-ebit entanglement distribution between cavity-coupled atomic memories. An SRM-inspired 16-QAM receiver achieves $1.75$ ebits per network mode use at $0.5$~dB end-to-end loss, exceeding single-qubit-per-mode benchmarks by $5.8$~dB and lying $3.8$~dB below the half-link capacity bound. The advantage persists for per-interface loss below $0.2$~dB and calibrated phase errors below $0.2π$. For 4-QAM, an optimized POVM with twice as many outcomes raises the achievable rate by $4.0\%$, revealing measurement-design headroom.
AI Summary
The paper asks whether coherent-state modulation can distribute multiple ebits between atomic-memory registers per optical network-mode use. Each node maps $q=\log_2M$ memory qubits onto an $M$-point QAM constellation through sequential cavity reflections and displacements. The two modes travel to a midpoint receiver, whose collective measurement heralds register entanglement. One network-mode use comprises one mode on each half-link. An explicit square-root-measurement-inspired POVM provides achievable rates evaluated using probability-weighted positive coherent information, a hashing lower bound on distillable entanglement. Numerical optimization of constellation spacing balances received-state distinguishability against environmental dephasing. At $0.5$ dB end-to-end loss, ideal-interface 16-QAM reaches $1.75$ ebits per network-mode use, versus $0.46$ for the stated single-photon baselines. This is a factor-$3.8$ gain and lies $3.8$ dB below the half-link pure-loss min-cut bound, $-\log_2(1-\eta)=4.16$ ebits per use. For 4-QAM, nonconvex optimization of a 32-outcome POVM increases the rate from $1.0853$ to $1.1289$ ebits per use, or $4.0\%$. Stepwise simulations include interface loss and systematic conditional-phase errors. In the calibrated-error model, preserving the high-order-QAM advantage requires approximately $\lesssim0.2$ dB loss per interface and $|\delta\phi|\lesssim0.2\pi$. The results concern low-loss links and achievable, not optimal, rates. The main unresolved implementation issue is the collective, generally non-Gaussian receiver: no efficient realization with passive optics, standard photonic ancillas, photon counting, and feed-forward is supplied.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Comments
- 8 pages, 5 figures