We analyze a novel approach for quantum magnetic sensing via optical detection of nuclear spin precession in a noble gas. The detection is carried out with an ultraviolet frequency comb laser, so no alkali vapor is required to be mixed with the noble gas during the sensing stage, allowing for hours-long spin relaxation time at room temperature. Our analysis reveals that combining high laser power and low laser intensity noise is crucial to achieving and exceeding state-of-the-art magnetometric performance, including that of cryogenic magnetometers. We find operational regimes where either fundamental or technical noise dominate, which directs experimental effort towards increasing laser power or lowering laser intensity noise, respectively. We also show that optimizing beam size is key to achieving optimal sensitivity. Our calculations predict that a record-breaking sensitivity of $24~\mathrm{aT}/\sqrt{\mathrm{Hz}}$ is achievable in 10 minutes with a 10 W ultraviolet laser with a relative intensity noise of -100 dBc/Hz.
AI Summary
The paper asks whether direct optical readout of polarized $^{129}\mathrm{Xe}$ nuclear-spin precession could support magnetometry competitive with SQUIDs and alkali-vapor sensors while retaining long room-temperature spin coherence. It analyzes an alkali-free sensing stage using Doppler-free two-photon excitation at $256\,\mathrm{nm}$, driven by a frequency-quadrupled fiber frequency comb. Spin-selective excitation converts precession into modulated infrared fluorescence; balanced detection against a UV reference is proposed to suppress laser intensity noise.
The analysis combines photon shot noise, spin projection noise, laser relative intensity noise (RIN), and detector noise in a decaying-sinusoid frequency-estimation model. Numerical optimization of the beam radius balances increasing atom number against decreasing fluorescence intensity. With a 10-minute measurement, the predicted sensitivities are $148\,\mathrm{aT}/\sqrt{\mathrm{Hz}}$ for $1\,\mathrm{W}$ UV power and $-80\,\mathrm{dBc/Hz}$ RIN, $24\,\mathrm{aT}/\sqrt{\mathrm{Hz}}$ for $10\,\mathrm{W}$ and $-100\,\mathrm{dBc/Hz}$, and $5\,\mathrm{aT}/\sqrt{\mathrm{Hz}}$ for $100\,\mathrm{W}$ and $-120\,\mathrm{dBc/Hz}$. Parameter maps distinguish intensity-noise-limited regimes from regimes where increasing laser power improves sensitivity.
These are projections, not demonstrated magnetometry. Calculations assume $T_2=8000\,\mathrm{s}$ at $1\,\mathrm{mbar}$ xenon pressure, 90% initial polarization, 25% fluorescence collection, and 45 dB common-mode rejection. High-power, low-RIN UV generation remains the principal technical requirement; the higher-power cases rely on anticipated laser developments. Low-frequency laser noise also motivates shifting the detected signal to higher frequency. Prior noble-gas polarization and separation from alkali atoms are assumed rather than modeled.
Little sign of AI-generated textIncrementalStrong assumptionsPossible errorOverclaims
Central claim may not hold: Equalizing the mean UV-reference and fluorescence photocurrents does not equalize their responses to excitation-intensity noise, so the detector's nominal 45 dB common-mode rejection cannot be applied as done in the sensitivity prediction.
The low-RIN frequency regime invoked for the headline sensitivity is not connected to the modeled low-frequency precession signal by an analyzed modulation or bias-field measurement protocol.
The transition linewidth is stated as 27.2 MHz even though the supplied natural linewidth and pressure broadening sum to 22.9 MHz.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
We analyze a novel approach for quantum magnetic sensing via optical detection of nuclear spin precession in a noble gas. The detection is carried out with an ultraviolet frequency comb laser, so no alkali vapor is required to be mixed with the noble gas during the sensing stage, allowing for hours-long spin relaxation time at room temperature. Our analysis reveals that combining high laser power and low laser intensity noise is crucial to achieving and exceeding state-of-the-art magnetometric performance, including that of cryogenic magnetometers. We find operational regimes where either fundamental or technical noise dominate, which directs experimental effort towards increasing laser power or lowering laser intensity noise, respectively. We also show that optimizing beam size is key to achieving optimal sensitivity. Our calculations predict that a record-breaking sensitivity of 24aT/Hz is achievable in 10 minutes with a 10 W ultraviolet laser with a relative intensity noise of -100 dBc/Hz.
The paper asks whether direct optical readout of polarized 129Xe nuclear-spin precession could support magnetometry competitive with SQUIDs and alkali-vapor sensors while retaining long room-temperature spin coherence. It analyzes an alkali-free sensing stage using Doppler-free two-photon excitation at 256nm, driven by a frequency-quadrupled fiber frequency comb. Spin-selective excitation converts precession into modulated infrared fluorescence; balanced detection against a UV reference is proposed to suppress laser intensity noise.
The analysis combines photon shot noise, spin projection noise, laser relative intensity noise (RIN), and detector noise in a decaying-sinusoid frequency-estimation model. Numerical optimization of the beam radius balances increasing atom number against decreasing fluorescence intensity. With a 10-minute measurement, the predicted sensitivities are 148aT/Hz for 1W UV power and −80dBc/Hz RIN, 24aT/Hz for 10W and −100dBc/Hz, and 5aT/Hz for 100W and −120dBc/Hz. Parameter maps distinguish intensity-noise-limited regimes from regimes where increasing laser power improves sensitivity.
These are projections, not demonstrated magnetometry. Calculations assume T2=8000s at 1mbar xenon pressure, 90% initial polarization, 25% fluorescence collection, and 45 dB common-mode rejection. High-power, low-RIN UV generation remains the principal technical requirement; the higher-power cases rely on anticipated laser developments. Low-frequency laser noise also motivates shifting the detected signal to higher frequency. Prior noble-gas polarization and separation from alkali atoms are assumed rather than modeled.
Self-compensated comagnetometers, employing overlapping samples of spin-polarized alkali and noble gases (for example K-3He) are promising sensors for exotic beyond-the-standard-model fields and high-precision metrology such as rotation sensing. When the comagnetometer operates in the so-called self-compensated regime, the effective field, originating from contact interactions between the alkali valence electrons and the noble-gas nuclei, is compensated with an applied magnetic field. When the comagnetometer begins operation in a given magnetic field, spin-exchange optical pumping establishes an equilibrium between the alkali electron-spin polarization and the nuclear-spin polarization. Subsequently, when the magnetic field is tuned to the compensation point, the spin polarization is brought out of the equilibrium conditions. This causes a practical issue for long measurement times. We report on a method for closed-loop control of the compensation field. This method allows optimization of the operating parameters, especially magnetic field gradients, in spite of the inherently slow (hours to days) dynamics of the system. With the optimization, higher stable nuclear polarization, longer relaxation times, and stronger electron-nuclear coupling are achieved which is useful for nuclear-spin-based quantum memory, spin amplifiers, and gyroscopes. The optimized sensor demonstrates a sensitivity comparable to the best previous comagnetometer but with four times lower noble-gas density. This paves the way for applications in both fundamental and applied science.
We describe a nuclear spin gyroscope based on an alkali-metal--noble-gas comagnetometer. Optically pumped alkali-metal vapor is used to polarize the noble-gas atoms and detect their gyroscopic precession. Spin precession due to magnetic fields as well as their gradients and transients can be cancelled in this arrangement. The sensitivity is enhanced by using a high-density alkali-metal vapor in a spin-exchange relaxation free regime. With a $\mathrm{K}\mathrm{\text{\ensuremath{-}}}^{3}\mathrm{He}$ comagnetometer we demonstrate rotation sensitivity of $5\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}7}\text{ }\text{ }\mathrm{rad}\text{ }{\mathrm{s}}^{\ensuremath{-}1}\text{ }{\mathrm{Hz}}^{\ensuremath{-}1/2}$, equivalent to a magnetic field sensitivity of 2.5fT/Hz1/2. The rotation signal can be increased by a factor of 10 using 21Ne with a smaller magnetic moment. The comagnetometer is also a promising tool in searches for anomalous spin couplings beyond the standard model.
This thesis presents advancements in radio-frequency atomic magnetometry utilising cold atoms as sensors. While cold atom magnetometers demonstrate lower absolute sensitivity compared to conventional vapour cell systems due to reduced atom numbers, they offer exceptional spatial resolution at the micrometre scale. The experimental apparatus features a cold atom production system capable of reaching quantum degeneracy through a refined cooling sequence that involves optical molasses, magnetic trapping and evaporation, and optical evaporative cooling in the dipole trap, culminating in a 87Rb Bose-Einstein condensate. This work details the development and characterisation of magnetometer set-ups with progressively enhanced performance. The first magnetometer utilised atoms in the optical molasses phase as a sensor, achieving an AC sensitivity of 330 pT/√Hz with approximately 108 atoms at 20 μK. Comprehensive magnetometry optimisation methods were developed to enhance sensitivity. Following laboratory interruptions due to the COVID-19 pandemic, system rebuilding incorporated significant upgrades, including a new probe laser and gradient compensation systems. The improved magnetometer prototype achieved a substantially enhanced sensitivity of 0.72±0.33 pT/√Hz, approaching the fundamental sensitivity limit of the system. Using atoms in the magnetic trap as a sensor, a sensitivity of 1.85 pT/√Hz was demonstrated. The system was verified to be photon-shot noise limited. Investigations into a double-pass probe configuration showed that, while the measured sensitivity was similar to that of the single-pass (4.3 pT/√Hz compared to 3.1 pT/√Hz at a probe power of 6.4 μW measured at the detector), the rotation angle increased by a factor of 2.2, with significantly reduced noise levels. These findings suggest that multi-pass strategies hold promise for enhanced performance in future implementations. In addition, the first signal detection from a BEC magnetometer, achieving 4.5 nT/√Hz with only 95,000 atoms at 35 nK was demonstrated.
Abstract Alkali-noble-gas comagnetometers have become an essential tool for tests of fundamental physics and offer a compact platform for precision gyroscopy. They are, however, limited by technical noise at low frequencies, commonly due to their limited suppression of magnetic noise. Here we investigate a new method for co-magnetometry between a single noble gas and alkali species. While similar to well-known devices using self-compensation, our scheme introduces magnetic pulses that controllably perturb the noble gas and pulsed optical pumping to polarise the alkali atoms. These applied pulses allow our scheme to measure, rather than just suppress, the effect of magnetic noise thereby offering reduced cross-talk. We show numerically that our scheme retrieves four signals (rotations and magnetic fields on two transverse axes) with similar sensitivity to a single axis device. We also present a proof-of-principle experiment based on a 87 Rb - 129 Xe cell. Our data shows a low magnetic-rotation cross-talk of 0.2 ± 0.1 μ Hz/pT, which is already on par with the most sensitive devices relying on self-compensation.
The negatively charged nitrogen vacancy center in diamond is widely used for quantum sensing due to the sensitivity of the spin triplet in the electronic ground state to external perturbations such as strain and electromagnetic fields, which makes it an excellent probe for changes in these perturbations. The spin state can be measured through optically detected magnetic resonance, which is most commonly achieved by detecting the photoluminescence after exciting the spin-triplet transition. Recently, methods have been proposed and demonstrated that use the absorption of the infrared singlet transition at 1042 nm instead. These methods, however, require cryogenic temperatures or external cavities to enhance the absorption signal. Here, we report on our efforts to optimize the magnetometer sensitivity at room temperature and without cavities. We reach a sensitivity of 18 pT / Hz , surpassing previously reported values, and a calculated shot-noise limit of 5 pT / Hz . We also report on a defect that is native to diamond grown by chemical vapor deposition and thus absent in high-pressure high-temperature diamond, the excitation of which impacts the measured singlet absorption signal.
Optical magnetometry plays a critical role in low-energy precision measurements and numerous other applications. In particular, permanent electric dipole moment (EDM) searches impose strict requirements on magnetic field sensitivity of the underlying atomic or molecular species. Other magnetometer properties -- such as chemical reactivity, dielectric strength, and interaction cross-sections with other species -- also impose limitations on experimental conditions. Here, we explore a novel approach to optical magnetometry, using multiphoton transitions of diamagnetic atoms to detect Larmor precession of polarized nuclei. Resonant probes are possible at moderate ultraviolet wavelengths, and hyperfine structure couples spin precession to fluorescence transitions with negligible backgrounds; paramagnetic rotation due to intensity-dependent dispersion may also be detectable. Nuclear spins and nonlinear optical excitation introduce new degrees of freedom, and evade limitations arising from rapid electronic decoherence. This dissertation reports progress towards two-photon optical magnetometry using ytterbium, rubidium, and xenon. We characterize the influence of probe polarization and magnetic fields on fluorescence spectra, for one- and two-photon continuous-wave (cw) excitation of ytterbium. Resolved hyperfine and isotope structure allow us to use spin-zero isotopes for diagnostics and normalization, and we develop analysis for overlapping two-photon resonances. We also report measurements of two-photon excitation in ytterbium and rubidium using picosecond laser pulses, and in xenon using a cw laser. Although hyperfine structure is unresolved, the rubidium measurements are sensitive to probe field polarization. Fluorescence spectra from two-photon excitation of ytterbium with femtosecond pulses show modulation when the repetition rate changes. Although techniques for polarizing noble gas nuclei are mature, existing cell designs are incompatible with two-photon magnetometry. We describe development of silicate-assisted hydroxide-catalysis bonding for both aluminosilicate EDM cells with silicon electrodes, and sapphire-windowed cells that transmit ultraviolet excitation light. Progress in measuring the 129Xe nuclear EDM is discussed. Absolute referencing of the picosecond laser to potassium transitions is proposed for two-photon spectroscopy of ytterbium and xenon, and a compatible frequency-tripling method is outlined to produce excitation light for xenon. Novel possibilities including spatial resolution and multiphoton optical pumping of nuclear spins are considered.