Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optical Magnetometry Using Multiphoton Transitions

Skyler Degenkolb

Published Jan 1, 2016• 1 citation
OpenAlex

Abstract

Optical magnetometry plays a critical role in low-energy precision measurements and numerous other applications. In particular, permanent electric dipole moment (EDM) searches impose strict requirements on magnetic field sensitivity of the underlying atomic or molecular species. Other magnetometer properties -- such as chemical reactivity, dielectric strength, and interaction cross-sections with other species -- also impose limitations on experimental conditions. Here, we explore a novel approach to optical magnetometry, using multiphoton transitions of diamagnetic atoms to detect Larmor precession of polarized nuclei. Resonant probes are possible at moderate ultraviolet wavelengths, and hyperfine structure couples spin precession to fluorescence transitions with negligible backgrounds; paramagnetic rotation due to intensity-dependent dispersion may also be detectable. Nuclear spins and nonlinear optical excitation introduce new degrees of freedom, and evade limitations arising from rapid electronic decoherence. This dissertation reports progress towards two-photon optical magnetometry using ytterbium, rubidium, and xenon. We characterize the influence of probe polarization and magnetic fields on fluorescence spectra, for one- and two-photon continuous-wave (cw) excitation of ytterbium. Resolved hyperfine and isotope structure allow us to use spin-zero isotopes for diagnostics and normalization, and we develop analysis for overlapping two-photon resonances. We also report measurements of two-photon excitation in ytterbium and rubidium using picosecond laser pulses, and in xenon using a cw laser. Although hyperfine structure is unresolved, the rubidium measurements are sensitive to probe field polarization. Fluorescence spectra from two-photon excitation of ytterbium with femtosecond pulses show modulation when the repetition rate changes. Although techniques for polarizing noble gas nuclei are mature, existing cell designs are incompatible with two-photon magnetometry. We describe development of silicate-assisted hydroxide-catalysis bonding for both aluminosilicate EDM cells with silicon electrodes, and sapphire-windowed cells that transmit ultraviolet excitation light. Progress in measuring the 129Xe nuclear EDM is discussed. Absolute referencing of the picosecond laser to potassium transitions is proposed for two-photon spectroscopy of ytterbium and xenon, and a compatible frequency-tripling method is outlined to produce excitation light for xenon. Novel possibilities including spatial resolution and multiphoton optical pumping of nuclear spins are considered.

Related papers

Magnetometry with Microwave-Assisted Optical Pumping in Warm Rb Vapor and Microfabricated Rb Vapor Cells

Lu, Ying-Ying

Quantum optical sensing is a maturing field that offers the capability to achieve extraor- dinary sensitivity. Atomic magnetometers, for example, now have the capability to detect brain signals and to precisely measure Earth’s gravity field. In optical atomic magnetome- ters, the electronic spins of the atoms in vapor form are aligned in the same direction by “pumping” the ensemble using laser light at a select frequency. Any magnetic field alters the spin states, which changes the optical properties of the vapor, such as the transmission of the laser light, providing a way to measure magnetic fields. After reviewing the theory of atomic structure and atom-light interactions relevant to the research presented here, I describe in the first part of this thesis a vector magnetometry method using microwave-assisted optical pumping, in which a microwave field resonant to the ground state hyperfine splitting of 87Rb pumps an ensemble of warm rubidium vapor, in addition to a strong optical pump beam, and a weaker optical probe beam. I present theoretical details as well as preliminary data demonstrating magnetic field measurements of a DC magnetic field. The measurements were taken when the DC field was aligned at various angles relative to the microwave magnetic field alignment. I compare theoretical and experimental differences in the measurements. With new methods for quantum devices comes the need for portability. In the second part of this thesis, we demonstrate the fabrication of millimeter-sized rubidium vapor cells using silicon micro-machining techniques. This method is relatively inexpensive compared to glass-blowing methods and allows rapid, large-scale production. I describe our process flow and demonstrate the presence of rubidium atoms inside our vapor cells. To conclude, suggestions for improvement are discussed.

•Jan 1, 2021•0 citations

Ultra-cold atomic magnetometry: realisation and test of a ⁸⁷Rb BEC for high-sensitivity magnetic field measurements

Michela Venturelli

The development of an experimental apparatus to produce Bose-Einstein condensates (BECs) of ⁸⁷Rb atoms and their application to magnetometry are discussed. Optical detection of atomic Larmor precession is a widely explored method for high-sensitivity measurements of magnetic fields. In this context, short laser/atom interaction time, atomic thermal diffusion and decoherence effects are among the main limitations. In this thesis, we overcome such problems by using spin-polarised ⁸⁷Rb ultra-cold atoms as the sensing element. After the atoms are polarised, a resonant pulse of radio-frequency excites Larmor precession, which is sensitive to external magnetic fields. By measuring the perturbations of the radio-frequency induced spin precession, information on the magnetic fields of interest. This is achieved by monitoring the polarisation plane’s rotation of a linearly polarised resonant laser probe. In the first part of this thesis, the building and optimisation of a laser-cooling set up to obtain a BEC in a hybrid trap is reported. In order to achieve the Phase Space Density (PSD) required for BEC, several different stages of trapping and cooling are necessary. Each phase has been implemented and optimised. The first step consists in the magneto-optical trap (MOT). Here a velocity dependent damping force and a spatially dependent confining force give the largest changes in PSD. Then atoms are loaded into a hybrid trap obtained by overlapping a quadrupole magnetic potential and a far detuned optical crossed dipole trap. The final stage for the condensation consists of forced evaporative cooling, both via magnetic and optical evaporation. In the second part of the thesis, a general overview of the principles of optical atomic magnetometry is provided and the advantages of using ultra-cold atoms with respect to conventional thermal vapours are discussed. The implementation, operation and a preliminary characterisation of the ultra-cold atom magnetometer are described along with the preliminary results collected. Finally, a plan for future improvements of its sensitivity is presented.

•Sep 28, 2018•0 citations

Comparison of absorption, fluorescence, and polarization spectroscopy of atomic rubidium

Seth Ashman, C. Stifler, Joaquín Romero

An ongoing spectroscopic investigation of atomic rubidium utilizes a two-photon, single-laser excitation process. Transitions accessible with our tunable laser include 5P1/2 (F ′ ) ← 5S1/2 (F) and 5P3/2 (F ′ ) ← 5S1/2 (F). The laser is split into a pump and probe beam to allow for Doppler-free measurements of transitions between hyperfine levels. The pump and probe beams are overlapped in a counter-propagating geometry and the laser frequency scans over a transition. Absorption, fluorescence and polarization spectroscopy techniques are applied to this basic experimental setup. The temperature of the vapor cell and the power of the pump and probe beams have been varied to explore line broadening effects and signal-to-noise of each technique. This humble setup will hopefully grow into a more robust experimental arrangement in which double resonance, two-laser excitations are used to explore hyperfine state changing collisions between rubidium atoms and noble gas atoms. Rb-noble gas collisions can transfer population between hyperfine levels, such as 5P3/2 (F ′ = 3) Collision ←− 5P3/2 (F ′ = 2), and the probe beam couples 7S1/2 (F ′′ = 2) ← 5P3/2 (F ′ = 3). Polarization spectroscopy signal depends on the rate of population transfer due to the collision as well as maintaining the orientation created by the pump laser. Fluorescence spectroscopy relies only on transfer of population due to the collision. Comparison of these techniques yields information regarding the change of the magnetic sublevels, mF , during hyperfine state changing collisions.

Bulletin of the American Physical Society•Jun 11, 2015•0 citations

Nonlinear Magneto-Optical Rotation in Rubidium Vapour

Nathanial Wilson

The field of magnetometry has played a pivotal role in developing our understanding of the world around us, by providing a wealth of unique information via non-invasive magnetic measurements. In many applications the characteristics of magnetic fields — their strength and temporal dependence, for example — constitute a unique fingerprint of their source, and provide a window into both their origin and any underlying physical processes that produced them. The invention of the laser, and recent advancements in anti-relaxation coatings for vapour cells, has revolutionised the field of magnetometry and given rise to a myriad of optical magnetometers which demonstrate exquisite sensitivity. This has seen a movement away from traditional cryogenic magnetometry techniques — which utilise superconducting quantum interference devices — and has ushered in a slew of optical techniques which offer a whole host of benefits such as room-temperature operability, intrinsic accuracy, and portability. Applications which were previously inaccessible due to demanding requirements such as high sensitivity at ambient temperatures, are now permissible using these newly developed optical techniques. This thesis details the development of an ultrastable optical magnetometer based on nonlinear magneto-optical rotation in rubidium vapour, that has been optimised for high sensitivity over long timescales. Additionally, a novel measurement technique — which relies on tracking the instantaneous phase of atomic spin precession — has been developed and demonstrated, resulting in significant improvements to both the amplitude and frequency response of the device when compared to conventional measurement techniques described in the literature. Significant attention is paid to technical and fundamental noise sources, which must be minimised in order to achieve high performance — especially over long timescales. The latter chapters discuss the development of the magnetometer into a sensitive and reliable system, capable of measuring extremely small magnetic-field fluctuations, and transient fields with arbitrarily complex temporal dependence. The capability of the device to measure minute field fluctuations, as well as rapid transient disturbances, may find use in real-world applications such as geophysical exploration, medical diagnostics and imaging, and magnetic anomaly detection. Furthermore, any fundamental physics applications which demand accurate and precise measurements of magnetic fields may find application of this device — and the novel measurement techniques developed within this thesis—extremely beneficial.

•Jan 1, 2020•0 citations

Development of NMOR magnetometer for spin-maser EDM experiment

A. Yoshimi, T. Nanao, T. Inoue +6 more

We have been developing a high sensitivity atomic magnetometer for atomic EDM experiments using a lowfrequency nuclear spin maser. In the developed nuclear spin maser of 129Xe, suppression of drift and fluctuation in the magnetic field is one of the important issues. The magnetometer being developed for spin maser EDM experiments utilizes the nonlinear magneto optical rotation (NMOR) e_ect in Rb atomic vapor. The enhancement of the optical rotation in a small magnetic field relies on the long spin-coherence time of Rb atoms in a vapor cell. The NMOR spectrum was measured by using fabricated Rb cells coated with an anti-relaxation material. The NMOR spectrum dependence on laser frequency, cell coating, and laser beam diameter were investigated. The magnetic sensitivity at present is 0:2 μG/√Hz from observed NMOR and noise spectra.

Physics Procedia•Jan 1, 2011•12 citations

Magnetometry using sodium fluorescence with synchronous modulation of two-photon resonant light fields

Raghwinder Singh Grewal, Mauricio Pulido, G. S. Pati +1 more

We have demonstrated a technique for remote magnetometry using fluorescence measurements in a sodium cell. This technique utilizes two-photon resonance instead of single-photon resonance to generate magnetic resonances with synchronous modulation of two laser fields. A strong magnetic resonance with its dip matching the Larmor frequency, ΩL, is produced when a magnetic field perpendicular to the laser propagation direction is applied. A magnetic field sensitivity of 45 pT/√Hz is measured at a 35% modulation duty cycle where ΩL resonance has a maximum amplitude. We have discussed ways to further improve the sensitivity closer to the shot-noise limit by making changes to our existing setup. An additional magnetic resonance at 3ΩL is also formed due to two-photon resonance, which can be utilized in determining the magnetic field orientation. We have developed a theoretical model based on density matrix equations to study the magnetic resonances under different conditions and also for validating our experimental observations.

arXiv:2006.14647•Applied Physics Letters•Nov 23, 2020•8 citations
Optical magnetometry plays a critical role in low-energy precision measurements and numerous other applications. In particular, permanent electric dipole moment (EDM) searches impose strict requirements on magnetic field sensitivity of the underlying atomic or molecular species. Other magnetometer properties -- such as chemical reactivity, dielectric strength, and interaction cross-sections with other species -- also impose limitations on experimental conditions. Here, we explore a novel approach to optical magnetometry, using multiphoton transitions of diamagnetic atoms to detect Larmor precession of polarized nuclei. Resonant probes are possible at moderate ultraviolet wavelengths, and hyperfine structure couples spin precession to fluorescence transitions with negligible backgrounds; paramagnetic rotation due to intensity-dependent dispersion may also be detectable. Nuclear spins and nonlinear optical excitation introduce new degrees of freedom, and evade limitations arising from rapid electronic decoherence. This dissertation reports progress towards two-photon optical magnetometry using ytterbium, rubidium, and xenon. We characterize the influence of probe polarization and magnetic fields on fluorescence spectra, for one- and two-photon continuous-wave (cw) excitation of ytterbium. Resolved hyperfine and isotope structure allow us to use spin-zero isotopes for diagnostics and normalization, and we develop analysis for overlapping two-photon resonances. We also report measurements of two-photon excitation in ytterbium and rubidium using picosecond laser pulses, and in xenon using a cw laser. Although hyperfine structure is unresolved, the rubidium measurements are sensitive to probe field polarization. Fluorescence spectra from two-photon excitation of ytterbium with femtosecond pulses show modulation when the repetition rate changes. Although techniques for polarizing noble gas nuclei are mature, existing cell designs are incompatible with two-photon magnetometry. We describe development of silicate-assisted hydroxide-catalysis bonding for both aluminosilicate EDM cells with silicon electrodes, and sapphire-windowed cells that transmit ultraviolet excitation light. Progress in measuring the 129Xe nuclear EDM is discussed. Absolute referencing of the picosecond laser to potassium transitions is proposed for two-photon spectroscopy of ytterbium and xenon, and a compatible frequency-tripling method is outlined to produce excitation light for xenon. Novel possibilities including spatial resolution and multiphoton optical pumping of nuclear spins are considered.
Quantum optical sensing is a maturing field that offers the capability to achieve extraor- dinary sensitivity. Atomic magnetometers, for example, now have the capability to detect brain signals and to precisely measure Earth’s gravity field. In optical atomic magnetome- ters, the electronic spins of the atoms in vapor form are aligned in the same direction by “pumping” the ensemble using laser light at a select frequency. Any magnetic field alters the spin states, which changes the optical properties of the vapor, such as the transmission of the laser light, providing a way to measure magnetic fields. After reviewing the theory of atomic structure and atom-light interactions relevant to the research presented here, I describe in the first part of this thesis a vector magnetometry method using microwave-assisted optical pumping, in which a microwave field resonant to the ground state hyperfine splitting of 87Rb pumps an ensemble of warm rubidium vapor, in addition to a strong optical pump beam, and a weaker optical probe beam. I present theoretical details as well as preliminary data demonstrating magnetic field measurements of a DC magnetic field. The measurements were taken when the DC field was aligned at various angles relative to the microwave magnetic field alignment. I compare theoretical and experimental differences in the measurements. With new methods for quantum devices comes the need for portability. In the second part of this thesis, we demonstrate the fabrication of millimeter-sized rubidium vapor cells using silicon micro-machining techniques. This method is relatively inexpensive compared to glass-blowing methods and allows rapid, large-scale production. I describe our process flow and demonstrate the presence of rubidium atoms inside our vapor cells. To conclude, suggestions for improvement are discussed.
The development of an experimental apparatus to produce Bose-Einstein condensates (BECs) of ⁸⁷Rb atoms and their application to magnetometry are discussed. Optical detection of atomic Larmor precession is a widely explored method for high-sensitivity measurements of magnetic fields. In this context, short laser/atom interaction time, atomic thermal diffusion and decoherence effects are among the main limitations. In this thesis, we overcome such problems by using spin-polarised ⁸⁷Rb ultra-cold atoms as the sensing element. After the atoms are polarised, a resonant pulse of radio-frequency excites Larmor precession, which is sensitive to external magnetic fields. By measuring the perturbations of the radio-frequency induced spin precession, information on the magnetic fields of interest. This is achieved by monitoring the polarisation plane’s rotation of a linearly polarised resonant laser probe. In the first part of this thesis, the building and optimisation of a laser-cooling set up to obtain a BEC in a hybrid trap is reported. In order to achieve the Phase Space Density (PSD) required for BEC, several different stages of trapping and cooling are necessary. Each phase has been implemented and optimised. The first step consists in the magneto-optical trap (MOT). Here a velocity dependent damping force and a spatially dependent confining force give the largest changes in PSD. Then atoms are loaded into a hybrid trap obtained by overlapping a quadrupole magnetic potential and a far detuned optical crossed dipole trap. The final stage for the condensation consists of forced evaporative cooling, both via magnetic and optical evaporation. In the second part of the thesis, a general overview of the principles of optical atomic magnetometry is provided and the advantages of using ultra-cold atoms with respect to conventional thermal vapours are discussed. The implementation, operation and a preliminary characterisation of the ultra-cold atom magnetometer are described along with the preliminary results collected. Finally, a plan for future improvements of its sensitivity is presented.
An ongoing spectroscopic investigation of atomic rubidium utilizes a two-photon, single-laser excitation process. Transitions accessible with our tunable laser include 5P1/2 (F ′ ) ← 5S1/2 (F) and 5P3/2 (F ′ ) ← 5S1/2 (F). The laser is split into a pump and probe beam to allow for Doppler-free measurements of transitions between hyperfine levels. The pump and probe beams are overlapped in a counter-propagating geometry and the laser frequency scans over a transition. Absorption, fluorescence and polarization spectroscopy techniques are applied to this basic experimental setup. The temperature of the vapor cell and the power of the pump and probe beams have been varied to explore line broadening effects and signal-to-noise of each technique. This humble setup will hopefully grow into a more robust experimental arrangement in which double resonance, two-laser excitations are used to explore hyperfine state changing collisions between rubidium atoms and noble gas atoms. Rb-noble gas collisions can transfer population between hyperfine levels, such as 5P3/2 (F ′ = 3) Collision ←− 5P3/2 (F ′ = 2), and the probe beam couples 7S1/2 (F ′′ = 2) ← 5P3/2 (F ′ = 3). Polarization spectroscopy signal depends on the rate of population transfer due to the collision as well as maintaining the orientation created by the pump laser. Fluorescence spectroscopy relies only on transfer of population due to the collision. Comparison of these techniques yields information regarding the change of the magnetic sublevels, mF , during hyperfine state changing collisions.
The field of magnetometry has played a pivotal role in developing our understanding of the world around us, by providing a wealth of unique information via non-invasive magnetic measurements. In many applications the characteristics of magnetic fields — their strength and temporal dependence, for example — constitute a unique fingerprint of their source, and provide a window into both their origin and any underlying physical processes that produced them. The invention of the laser, and recent advancements in anti-relaxation coatings for vapour cells, has revolutionised the field of magnetometry and given rise to a myriad of optical magnetometers which demonstrate exquisite sensitivity. This has seen a movement away from traditional cryogenic magnetometry techniques — which utilise superconducting quantum interference devices — and has ushered in a slew of optical techniques which offer a whole host of benefits such as room-temperature operability, intrinsic accuracy, and portability. Applications which were previously inaccessible due to demanding requirements such as high sensitivity at ambient temperatures, are now permissible using these newly developed optical techniques. This thesis details the development of an ultrastable optical magnetometer based on nonlinear magneto-optical rotation in rubidium vapour, that has been optimised for high sensitivity over long timescales. Additionally, a novel measurement technique — which relies on tracking the instantaneous phase of atomic spin precession — has been developed and demonstrated, resulting in significant improvements to both the amplitude and frequency response of the device when compared to conventional measurement techniques described in the literature. Significant attention is paid to technical and fundamental noise sources, which must be minimised in order to achieve high performance — especially over long timescales. The latter chapters discuss the development of the magnetometer into a sensitive and reliable system, capable of measuring extremely small magnetic-field fluctuations, and transient fields with arbitrarily complex temporal dependence. The capability of the device to measure minute field fluctuations, as well as rapid transient disturbances, may find use in real-world applications such as geophysical exploration, medical diagnostics and imaging, and magnetic anomaly detection. Furthermore, any fundamental physics applications which demand accurate and precise measurements of magnetic fields may find application of this device — and the novel measurement techniques developed within this thesis—extremely beneficial.
We have been developing a high sensitivity atomic magnetometer for atomic EDM experiments using a lowfrequency nuclear spin maser. In the developed nuclear spin maser of 129Xe, suppression of drift and fluctuation in the magnetic field is one of the important issues. The magnetometer being developed for spin maser EDM experiments utilizes the nonlinear magneto optical rotation (NMOR) e_ect in Rb atomic vapor. The enhancement of the optical rotation in a small magnetic field relies on the long spin-coherence time of Rb atoms in a vapor cell. The NMOR spectrum was measured by using fabricated Rb cells coated with an anti-relaxation material. The NMOR spectrum dependence on laser frequency, cell coating, and laser beam diameter were investigated. The magnetic sensitivity at present is 0:2 μG/√Hz from observed NMOR and noise spectra.
We have demonstrated a technique for remote magnetometry using fluorescence measurements in a sodium cell. This technique utilizes two-photon resonance instead of single-photon resonance to generate magnetic resonances with synchronous modulation of two laser fields. A strong magnetic resonance with its dip matching the Larmor frequency, ΩL, is produced when a magnetic field perpendicular to the laser propagation direction is applied. A magnetic field sensitivity of 45 pT/√Hz is measured at a 35% modulation duty cycle where ΩL resonance has a maximum amplitude. We have discussed ways to further improve the sensitivity closer to the shot-noise limit by making changes to our existing setup. An additional magnetic resonance at 3ΩL is also formed due to two-photon resonance, which can be utilized in determining the magnetic field orientation. We have developed a theoretical model based on density matrix equations to study the magnetic resonances under different conditions and also for validating our experimental observations.