Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2609.31837

Measuring Clock Precision Without an Ideal Time Reference

Pablo Á. Domínguez, Christopher Chubb, Mischa P. Woods

quant-phSubmitted Sep 25, 2026• Announced Sep 29, 2026• 0 citations
arXivHTMLPDF

Abstract

Characterising physical devices typically requires comparison with more precise reference standards. For clocks, however, this approach is problematic because no physically perfect time reference exists; real clocks have finite, model-dependent uncertainty. We address whether multiple imperfect clocks can collectively determine their precision without an absolute reference. This paper provides analytic bounds and protocols for quantifying clock precision using only multiple copies of the same clock, which need not be synchronised and may have manufacturing variations or environmental coupling. Beyond clock characterisation, these methods enable precise measurements f sub-period intervals and relativistic effects such as time dilation and Doppler shifts, providing tools for quantum metrology and fundamental physics.

AI Summary

Can the dimensionless precision of a ticking clock, $R=\mu^2/\sigma^2$, be inferred without an ideal time reference? This paper studies protocols using multiple imperfect clocks, modelled as independent renewal processes with i.i.d. inter-tick intervals. The observables are tick counts and tick ordering rather than externally measured timestamps. The main two-clock protocol starts equal-frequency clocks with an offset $\Delta=\delta\mu$, then counts their combined ticks until one produces two consecutive ticks. Writing this count as $\tau$, it establishes $\mathbb{E}[\tau]/R=\delta(1-\delta)+O(R^{-1/2+1/p})$ and $P(\tau\text{ odd})=\delta+O(R^{-1/2+1/p})$, assuming uniformly bounded standardized absolute moments of order $p>2$. Thus the unknown offset can be inferred from the same data, giving $\mathbb{E}[\tau]/R=P_{\rm odd}P_{\rm even}+O(R^{-1/2+1/p})$. Higher stopping-time moments obey a polynomial hierarchy corresponding to Brownian exit-time moments. Proofs use martingale stopping arguments and overshoot bounds. A many-clock protocol instead estimates $R$ through the mean-to-variance ratio of long-window tick counts, using renewal asymptotics. Gaussian Monte Carlo simulations illustrate the two-clock relations for $R=10^2$–$10^4$. Extensions give asymptotic equations for jointly inferring precision, initial offset and frequency mismatch when two clocks have equal $R$ but different periods. These require additional distributional assumptions, including asymptotically mesokurtic fluctuations. The stated practical limitations include long runs and many repetitions for precise clocks, and difficulty manufacturing clocks with equal precision. The framework assumes i.i.d. ticking; its two-clock error bounds decrease with increasing intrinsic $R$, not simply with additional trials.

Some signs of AI-generated textOverclaimsStrong assumptionsMissing comparisonPossible error

Central claim may not hold: The central two-clock proof replaces the parity-specific double-tick event with unrestricted first exit, and an explicit bounded-moment lattice example contradicts its claimed exit-parity estimate. The unequal-frequency derivation drops the clock-frequency drift and uses a non-martingale in optional stopping, while the conclusion additionally claims an uncertainty rate not proved for that extension. Theorem 1 claims an inverse-duration error under sublinear duration-variance growth, although its own variance decomposition and an explicit Poisson-count example show that this assumption permits slower convergence. The stated Allan-variance formula omits nominal-frequency normalisation: for fractional frequency the renewal-model result is asymptotically mu/(R t), not 1/(R mu t). The operational guarantees are narrower than advertised: they assume i.i.d. ticking and equal precision across copies, and the two-clock asymptotic model-error bounds are not finite-sample guarantees or arbitrary-accuracy estimates at fixed R.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Comments
19 pages, 4 figures

Related papers

Characterising the precision of a clock without any external time reference

Pablo Á. Domínguez, Christopher Chubb, Mischa P. Woods

Determining a clock's precision usually requires comparison with a better time reference, yet no ideal reference is physically attainable. We show how a single clock can characterise its own precision using only a signal splitter and delayed trigger, whose uncertainty is explicitly accounted for. The resulting estimator depends only on tick-count statistics. A purpose-built electronic circuit validates the method without an external timekeeper or a second clock.

quant-pharXiv:2609.31832•Sep 29, 2026

Based on Quantum Sensors: High-Precision Time Measurement

Jincheng Zhang

This paper explores the potential of quantum sensors for achieving unprecedented levels of precision in time measurement. The core concept leverages the inherent sensitivity of quantum systems to external perturbations, particularly quantum entanglement and coherence, to directly measure the passage of time. Traditional timekeeping methods rely on periodic phenomena like atomic oscillations, which introduce systematic errors and limitations. Quantum sensors, however, offer a fundamentally different approach, promising a shift towards a measurement paradigm where time itself is directly sensed. This work details a theoretical framework for such a system, outlining key components, potential challenges, and the anticipated improvements in accuracy compared to existing technologies. We propose a system utilizing a macroscopic quantum clock, exploiting the precisely controlled evolution of quantum superposition states to determine time intervals with potentially sub-picosecond resolution. The design emphasizes the minimization of decoherence effects—a critical factor in realizing the full potential of quantum time measurement—and introduces novel strategies for signal processing and calibration. This research contributes to the emerging field of quantum metrology and lays the groundwork for future advancements in high-precision timekeeping and fundamental physics research. ---

•Aug 29, 2026•0 citations

Quantum Protocols for Time Synchronisation and Distribution: A Critical Assessment

Michal Krelina, Utku Tefek, Zeki C. Seskir +1 more

Precise time synchronisation underpins critical infrastructure from telecommunications and financial markets to power grids and scientific metrology. Several families of quantum protocols have been proposed and demonstrated for clock synchronisation and time distribution, exploiting entangled photon pairs, quantum key distribution (QKD) correlations, Hong-Ou-Mandel interference, and entangled clock networks. We critically assess these approaches, reviewing the main quantum time synchronisation (QTS) protocol families, quantifying the gap between theory and experiment, and identifying practical bottlenecks in sources, detectors, and channels. We survey the classical timing landscape from Network Time Protocol (NTP) and GPS to laboratory-grade optical frequency transfer, and compare quantum and classical methods at equivalent maturity. We examine use cases including financial trading, power grids, telecommunications, scientific metrology, and military applications, evaluating whether quantum timing offers a realistic advantage. We show that time transfer, not clock performance, is now the bottleneck for distributed optical timekeeping: the best demonstrated synchronisation uncertainty (2.46~ps) falls two to three orders of magnitude short of what optical clocks with fractional frequency uncertainties of $10^{-18}$--$10^{-19}$ require. Our assessment is that quantum time synchronisation will not replace classical methods for most applications in the near-to-medium future. Its near-term value lies in physical-layer security against timing manipulation and integration with quantum communication networks, while closing the synchronisation gap for scientific metrology remains the most critical open challenge.

quant-pharXiv:2604.10243•EPJ Quantum Technology•Apr 14, 2026•1 citation

High-Precision Quantum Measurement Techniques for Fundamental Constants and Timekeeping

Lucas Reinhardt

Precision metrology has undergone a revolution thanks to quantum measurement techniques, which have made it possible to determine basic constants with previously unheard-of accuracy and to improve timekeeping. These techniques, which are based on the ideas of quantum physics, use entanglement, superposition, and quantum state interference to increase measurement accuracy beyond what is possible with classical approaches. the most recent advancements in high-precision quantum measurement methods, with an emphasis on how they can be used to determine fundamental constants like Planck's constant and the fine-structure constant. Additionally, atomic clocks and optical lattice clocks have advanced timekeeping by providing remarkably accurate time standards. There is also discussion of how quantum-enhanced sensors can improve temperature, electromagnetic field, and gravitational wave measurements. In order to redefine precision in science and industry, we conclude by outlining potential directions for incorporating quantum technologies into global metrology frameworks.

The Sankalpa: International Journal of Management Decisions•Jul 2, 2026•0 citations

Universal quantum modifications to general relativistic time dilation in delocalised clocks

Shishir Khandelwal, Maximilian P.E. Lock, Mischa P. Woods

The theory of relativity associates a proper time with each moving object via its world line. In quantum theory however, such well-defined trajectories are forbidden. After introducing a general characterisation of quantum clocks, we demonstrate that, in the weak-field, low-velocity limit, all ``good'' quantum clocks experience time dilation as dictated by general relativity when their state of motion is classical (i.e. Gaussian). For nonclassical states of motion, on the other hand, we find that quantum interference effects may give rise to a significant discrepancy between the proper time and the time measured by the clock. The universality of this discrepancy implies that it is not simply a systematic error, but rather a quantum modification to the proper time itself. We also show how the clock's delocalisation leads to a larger uncertainty in the time it measures – a consequence of the unavoidable entanglement between the clock time and its center-of-mass degrees of freedom. We demonstrate how this lost precision can be recovered by performing a measurement of the clock's state of motion alongside its time reading.

arXiv:1904.02178•Quantum•Aug 14, 2020•35 citations

Quantum parameter estimation with imperfect reference frames

Dominik Šafránek, Mehdi Ahmadi, Ivette Fuentes

Quantum metrology studies quantum strategies which enable us to outperform their classical counterparts. In this framework, the existence of perfect classical reference frames is usually assumed. However, such ideal reference frames might not always be available. The reference frames required in metrology strategies can either degrade or become misaligned during the estimation process. We investigate how the imperfectness of reference frames leads to noise which in general affects the ultimate precision limits in measurement of physical parameters. Moreover, since quantum parameter estimation can be phrased as a quantum communication protocol between two parties, our results provide deeper insight into quantum communication protocols with misaligned reference frames. Our framework allows for the study of noise on the efficiency of such schemes.

arXiv:1404.6421•New Journal of Physics•Mar 3, 2015•22 citations
Characterising physical devices typically requires comparison with more precise reference standards. For clocks, however, this approach is problematic because no physically perfect time reference exists; real clocks have finite, model-dependent uncertainty. We address whether multiple imperfect clocks can collectively determine their precision without an absolute reference. This paper provides analytic bounds and protocols for quantifying clock precision using only multiple copies of the same clock, which need not be synchronised and may have manufacturing variations or environmental coupling. Beyond clock characterisation, these methods enable precise measurements f sub-period intervals and relativistic effects such as time dilation and Doppler shifts, providing tools for quantum metrology and fundamental physics.
Can the dimensionless precision of a ticking clock, R=μ2/σ2R=\mu^2/\sigma^2R=μ2/σ2, be inferred without an ideal time reference? This paper studies protocols using multiple imperfect clocks, modelled as independent renewal processes with i.i.d. inter-tick intervals. The observables are tick counts and tick ordering rather than externally measured timestamps.
The main two-clock protocol starts equal-frequency clocks with an offset Δ=δμ\Delta=\delta\muΔ=δμ, then counts their combined ticks until one produces two consecutive ticks. Writing this count as τ\tauτ, it establishes E[τ]/R=δ(1−δ)+O(R−1/2+1/p)\mathbb{E}[\tau]/R=\delta(1-\delta)+O(R^{-1/2+1/p})E[τ]/R=δ(1−δ)+O(R−1/2+1/p) and P(τ odd)=δ+O(R−1/2+1/p)P(\tau\text{ odd})=\delta+O(R^{-1/2+1/p})P(τ odd)=δ+O(R−1/2+1/p), assuming uniformly bounded standardized absolute moments of order p>2p>2p>2. Thus the unknown offset can be inferred from the same data, giving E[τ]/R=PoddPeven+O(R−1/2+1/p)\mathbb{E}[\tau]/R=P_{\rm odd}P_{\rm even}+O(R^{-1/2+1/p})E[τ]/R=Podd​Peven​+O(R−1/2+1/p). Higher stopping-time moments obey a polynomial hierarchy corresponding to Brownian exit-time moments. Proofs use martingale stopping arguments and overshoot bounds. A many-clock protocol instead estimates RRR through the mean-to-variance ratio of long-window tick counts, using renewal asymptotics. Gaussian Monte Carlo simulations illustrate the two-clock relations for R=102R=10^2R=102–10410^4104.
Extensions give asymptotic equations for jointly inferring precision, initial offset and frequency mismatch when two clocks have equal RRR but different periods. These require additional distributional assumptions, including asymptotically mesokurtic fluctuations. The stated practical limitations include long runs and many repetitions for precise clocks, and difficulty manufacturing clocks with equal precision. The framework assumes i.i.d. ticking; its two-clock error bounds decrease with increasing intrinsic RRR, not simply with additional trials.
This paper explores the potential of quantum sensors for achieving unprecedented levels of precision in time measurement. The core concept leverages the inherent sensitivity of quantum systems to external perturbations, particularly quantum entanglement and coherence, to directly measure the passage of time. Traditional timekeeping methods rely on periodic phenomena like atomic oscillations, which introduce systematic errors and limitations. Quantum sensors, however, offer a fundamentally different approach, promising a shift towards a measurement paradigm where time itself is directly sensed. This work details a theoretical framework for such a system, outlining key components, potential challenges, and the anticipated improvements in accuracy compared to existing technologies. We propose a system utilizing a macroscopic quantum clock, exploiting the precisely controlled evolution of quantum superposition states to determine time intervals with potentially sub-picosecond resolution. The design emphasizes the minimization of decoherence effects—a critical factor in realizing the full potential of quantum time measurement—and introduces novel strategies for signal processing and calibration. This research contributes to the emerging field of quantum metrology and lays the groundwork for future advancements in high-precision timekeeping and fundamental physics research. ---
Precise time synchronisation underpins critical infrastructure from telecommunications and financial markets to power grids and scientific metrology. Several families of quantum protocols have been proposed and demonstrated for clock synchronisation and time distribution, exploiting entangled photon pairs, quantum key distribution (QKD) correlations, Hong-Ou-Mandel interference, and entangled clock networks. We critically assess these approaches, reviewing the main quantum time synchronisation (QTS) protocol families, quantifying the gap between theory and experiment, and identifying practical bottlenecks in sources, detectors, and channels. We survey the classical timing landscape from Network Time Protocol (NTP) and GPS to laboratory-grade optical frequency transfer, and compare quantum and classical methods at equivalent maturity. We examine use cases including financial trading, power grids, telecommunications, scientific metrology, and military applications, evaluating whether quantum timing offers a realistic advantage. We show that time transfer, not clock performance, is now the bottleneck for distributed optical timekeeping: the best demonstrated synchronisation uncertainty (2.46~ps) falls two to three orders of magnitude short of what optical clocks with fractional frequency uncertainties of 10−1810^{-18}10−18--10−1910^{-19}10−19 require. Our assessment is that quantum time synchronisation will not replace classical methods for most applications in the near-to-medium future. Its near-term value lies in physical-layer security against timing manipulation and integration with quantum communication networks, while closing the synchronisation gap for scientific metrology remains the most critical open challenge.
Precision metrology has undergone a revolution thanks to quantum measurement techniques, which have made it possible to determine basic constants with previously unheard-of accuracy and to improve timekeeping. These techniques, which are based on the ideas of quantum physics, use entanglement, superposition, and quantum state interference to increase measurement accuracy beyond what is possible with classical approaches. the most recent advancements in high-precision quantum measurement methods, with an emphasis on how they can be used to determine fundamental constants like Planck's constant and the fine-structure constant. Additionally, atomic clocks and optical lattice clocks have advanced timekeeping by providing remarkably accurate time standards. There is also discussion of how quantum-enhanced sensors can improve temperature, electromagnetic field, and gravitational wave measurements. In order to redefine precision in science and industry, we conclude by outlining potential directions for incorporating quantum technologies into global metrology frameworks.
The theory of relativity associates a proper time with each moving object via its world line. In quantum theory however, such well-defined trajectories are forbidden. After introducing a general characterisation of quantum clocks, we demonstrate that, in the weak-field, low-velocity limit, all ``good'' quantum clocks experience time dilation as dictated by general relativity when their state of motion is classical (i.e. Gaussian). For nonclassical states of motion, on the other hand, we find that quantum interference effects may give rise to a significant discrepancy between the proper time and the time measured by the clock. The universality of this discrepancy implies that it is not simply a systematic error, but rather a quantum modification to the proper time itself. We also show how the clock's delocalisation leads to a larger uncertainty in the time it measures – a consequence of the unavoidable entanglement between the clock time and its center-of-mass degrees of freedom. We demonstrate how this lost precision can be recovered by performing a measurement of the clock's state of motion alongside its time reading.
Quantum metrology studies quantum strategies which enable us to outperform their classical counterparts. In this framework, the existence of perfect classical reference frames is usually assumed. However, such ideal reference frames might not always be available. The reference frames required in metrology strategies can either degrade or become misaligned during the estimation process. We investigate how the imperfectness of reference frames leads to noise which in general affects the ultimate precision limits in measurement of physical parameters. Moreover, since quantum parameter estimation can be phrased as a quantum communication protocol between two parties, our results provide deeper insight into quantum communication protocols with misaligned reference frames. Our framework allows for the study of noise on the efficiency of such schemes.