Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2609.27097

Investigation of Widefield NV-Center Magnetic Imaging for Non-Destructive Materials Testing

Niklas Mathes, Marvin Feuerhelm, Simon Philipp, Ivan Soldatov, Philipp D'Astolfo, Peter Knittel, Thomas Straub, Jan Jeske, Rüdiger Quay, Xavier Vidal

physics.ins-detphysics.app-phquant-phSubmitted Sep 22, 2026• Announced Sep 24, 2026• Revised Sep 24, 2026 (v2)
v1 · Sep 22, 2026v2 · Sep 24, 2026
arXivHTMLPDF

Abstract

Due to progressing miniaturization, material fatigue is expected to gain importance on microscopic scales. Nevertheless, most non-destructive testing techniques are optimized for macroscopic scales. Therefore, new approaches applicable to miniaturized samples need to be explored. High spatial resolution imaging of a material's magnetic stray field enables sensitive detection of microstructural changes due to the local interplay of magnetic properties, strain, and defects. Up to now, this approach has rarely been used for materials testing since high-resolution magnetic sensing is traditionally challenging. Novel quantum sensing techniques offer the potential to close this gap. One of the most prominent quantum sensors, the nitrogen vacancy center in diamond, is investigated for non-destructive testing applications within the scope of this work. An experimental system based on a widefield sensing approach was developed to image magnetic stray field distributions within seconds to minutes over areas up to 1 x 1 $mm^2$. Magnetic sensitivities below 10 $μ$T/$\sqrt{\text{Hz}}$ and a spatial resolution of 1-2 $μ$m were achieved. The technique offers high mechanical stability, which is crucial for non-destructive testing applications. Comparison with magneto-optical Kerr effect measurements showed that the magnetic field maps are strongly correlated with the material's surface domains while containing additional information from deeper inside the sample. Characteristic changes in the magnetic stray field distribution were detected in an electrical steel sample after cyclic loading. A potential marker for early fatigue damage was deduced from the splitting gradient distribution, while 2D Fourier transform analysis provided additional insight.

AI Summary

Can widefield NV-center magnetometry detect microscopic fatigue-related changes in ferromagnetic materials before visible damage appears? This paper investigates this question using near-surface NV ensembles in diamond to image stray fields from polished iron and electrical steel, including steel subjected to controlled cyclic loading. The apparatus achieves magnetic imaging resolution below $2\,\mu\mathrm{m}$ and sensitivity below $10\,\mu\mathrm{T}/\sqrt{\mathrm{Hz}}$. Full pixel-resolved ODMR maps take approximately five minutes; fixed-frequency fluorescence imaging reproduces many features in nine seconds. Comparisons with optical microscopy and magneto-optical Kerr imaging associate measured features with grains and domain boundaries. Magnetostatic simulations examine sensor–sample separation, optical resolution, and NV orientation, suggesting sensitivity to magnetic structures within the first few micrometres beneath the surface. For electrical steel loaded at a reported stress amplitude of $120\,\mathrm{MPa}$, stress ratio $R=0.1$, and $60\,\mathrm{Hz}$, maps after $5\times10^6$ cycles contain finer features than after $5\times10^4$ cycles. Across three measurement positions, splitting-gradient histograms shift toward higher gradients, proposed as a potential early-fatigue marker. Two-dimensional Fourier analysis additionally tracks evolving feature size and directionality. Interpretation remains limited: overlapping resonances from four NV orientations produce artifacts rather than an unambiguous vector-field map; subsurface contributions are inferred rather than independently resolved; and three-dimensional magnetization reconstruction is nonunique. Microscopic defects causing the changes are not directly identified. Performance requires close alignment to flat samples, while strong stray fields from hard magnets can quench fluorescence. Further simulations and measurements are needed to establish the relation between magnetic signatures and fatigue damage.

Little sign of AI-generated textIncrementalOverclaims

Error found: The abstract claims imaging over 1 × 1 mm², whereas the described configuration has approximately 300 µm diameter illumination and a 0.6 × 0.6 mm² sensor, with no procedure establishing the larger imaging area. The paper interprets peaks absent from the MOKE domain-boundary pattern as buried magnetic features without independently establishing their depth or excluding surface-origin explanations. The reported frequency endpoints span 70 MHz rather than the stated 170 MHz. The stated 20× objective and change from a 180 mm to a 200 mm tube lens imply approximately 22.2× magnification rather than 18×, leaving the reported absolute spatial calibration unresolved.

Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.

Comments
Corrected author name metadata; no changes to manuscript content

Related papers

Widefield Quantum Sensor for Vector Magnetic Field Imaging of Micromagnetic Structures

Orlando D. Cunha, Filipe Camarneiro, João P. Silva +4 more

Many spintronic, magnetic-memory, and neuromorphic devices rely on spatially varying magnetic fields. Quantitatively imaging these fields with full vector information over extended areas remains a major challenge. Existing probes either offer nanoscale resolution at the cost of slow scanning, or widefield imaging with limited vector sensitivity or material constraints. Quantum sensing with nitrogen-vacancy (NV) centers in diamond promises to bridge this gap, but a practical camera-based vector magnetometry implementation on relevant microstructures has not been demonstrated. Here we adapt a commercial widefield microscope to implement a camera-compatible pulsed optically detected magnetic resonance protocol to reconstruct stray-field vectors from microscale devices. By resolving the Zeeman shifts of the four NV orientations, we reconstruct the stray-field vector generated by microfabricated permalloy structures that host multiple stable remanent states. Our implementation achieves a spatial resolution of $\approx 0.52 ~μ\mathrm{m}$ across an $83~μ\mathrm{m} \times 83~μ\mathrm{m}$ field of view and a peak sensitivity of $ (828 \pm 142)~\mathrm{nT\,Hz^{-1}}$, with acquisition times of only a few minutes. These results establish pulsed widefield NV magnetometry on standard microscopes as a practical and scalable tool for routine vector-resolved imaging of complex magnetic devices.

quant-pharXiv:2512.03748•Dec 4, 2025

Novel Magnetic-Sensing Modalities with Nitrogen-Vacancy Centers in Diamond

Huijie Zheng, Arne Wickenbrock, Georgios Chatzidrosos +16 more

In modern-day quantum metrology, quantum sensors are widely employed to detect weak magnetic fields or nanoscale signals. Quantum devices, exploiting quantum coherence, are inevitably connected to physical constants and can achieve accuracy, repeatability, and precision approaching fundamental limits. As a result, these sensors have shown utility in a wide range of research domains spanning both science and technology. A rapidly emerging quantum sensing platform employs atomic-scale defects in crystals. In particular, magnetometry using nitrogen-vacancy (NV) color centers in diamond has garnered increasing interest. NV systems possess a combination of remarkable properties, optical addressability, long coherence times, and biocompatibility. Sensors based on NV centers excel in spatial resolution and magnetic sensitivity. These diamond-based sensors promise comparable combination of high spatial resolution and magnetic sensitivity without cryogenic operation. The above properties of NV magnetometers promise increasingly integrated quantum measurement technology, as a result, they have been extensively developed with various protocols and find use in numerous applications spanning materials characterization, nuclear magnetic resonance (NMR), condensed matter physics, paleomagnetism, neuroscience and living systems biology, and industrial vector magnetometry. In this chapter, NV centers are explored for magnetic sensing in a number of contexts. In general, we introduce novel regimes for magnetic-field probes with NV ensembles. Specifically, NV centers are developed for sensitive magnetometers for applications where microwaves (MWs) are prohibitively invasive and operations need to be carried out under zero ambient magnetic field. The primary goal of our discussion is to improve the utility of these NV center-based magnetometers.

IntechOpen eBooks•Feb 8, 2021•1 citation

New Quantum Sensing Modalities of Nitrogen-Vacancy Centers

Qiu, Ziwei

The recent decade has witnessed exciting developments in quantum science and technology. Quantum sensing is a rapidly growing branch, which exploits the fragility of quantum systems to detect small external signals. The extreme control at the single-atom level and the remarkably long coherence time of engineered quantum systems enable unprecedented sensitivity and precision, beating the performance of classical techniques. The nitrogen-vacancy (NV) center in diamond is one of the most promising quantum sensors. Its unique advantages have attracted considerable attention, including a long spin coherence time throughout a broad temperature range, nanoscale resolution limited by the sensor-sample distance, convenient optical control of its spin states and remarkably versatile sensing capabilities. Its properties are well studied under a bias magnetic field oriented along its quantization axis. However, its sensing capabilities in the presence of an off-axis magnetic field are much less explored. My research aims to unlock the full potential of NV quantum sensor by developing new sensing modalities under a magnetic field acting perpendicular to the NV axis, and furthermore, integrating them into a scanning probe microscope. In this dissertation, I will report our progress toward building a scanning NV multimodal quantum imaging platform, which will open up exciting opportunities in measuring nanoscale phenomena. The first chapter provides an introduction to the background of quantum sensing with NV centers, followed by a discussion on its basic properties and established sensing techniques. The second and third chapters are dedicated to two experiments performed under a perpendicular magnetic field where traditional NV magnetometry based on the Zeeman effect fails. In the second chapter, I will introduce a new sensing strategy that uses the entanglement between the electron and nuclear spins to restore the magnetic field sensitivity under this unfavored condition. This allows us to sense small changes in the magnetic field angle relative to the NV axis, and to detect anisotropic magnetic noise in the local environment. In the third chapter, I will present our latest development of scanning NV electrometry, where a single NV at the apex of a diamond scanning probe images external alternating (AC) and direct (DC) electric fields with sub-100 nm resolution. In the last chapter, I will discuss our efforts on four experiments that were left unfinished. I will present the results we have achieved, analyze the challenges that we faced and propose potential solutions to overcome them.

•Jan 1, 2022•0 citations

Nanoscale quantum sensing using nitrogen-vacancy centres in diamond

Liam Paul McGuinness

Devices that detect and spatially image magnetic fields are important in many areas of study including chemistry, electronics, materials science and biology. By extending the boundaries of what is currently achievable we may begin to explore areas previously inaccessible to science, such as wide-field imaging of neuron signaling or structural determination of single molecules. Here we present experimental progress towards the development of a nanoscale magnetic sensor operating under ambient conditions using the nitrogen-vacancy (NV) centre in diamond. This thesis describes the construction of a lab-built, confocal microscope capable of detecting single NV centres, with additional microwave control for coherent manipulation of the NV spin. The feasibility of using NV-diamond for real-time detection of the action potential generated by a neuron, and with high spatial resolution is experimentally demonstrated. The quantum coherence of single NV spins is monitored in various chemical solutions, and detection of nanoscale magnetic environments external to the diamond are demonstrated. This work sets the experimental foundation for using manufactured single quantum systems as sensitive probes of external chemical environments. In addition, the first measurements of single quantum coherent spins inside living cells are performed with NV centres in nanodiamonds. These studies on NV centres inside living cells demonstrate their promise as magnetic sensors for biology. Furthermore, alternative quantum sensing technologies emerge including rotational tracking of nanodiamonds and enhanced identification of fluorescent nanoparticles.

•Jan 1, 2012•0 citations

Sub-nanometer resolution of the nitrogen-vacancy center by Fourier magnetic imaging

Peihan Lei, You Huang, Zhi Cheng +2 more

Solid-state spins in diamond are promising building blocks for quantum computing and quantum sensing, both of which require precise nanoscale addressing of individual spins. To explore the resolution limit of this approach, we demonstrate Fourier magnetic imaging of nitrogen-vacancy centers in diamond under state-of-the-art conditions. We constructed a highly compact experimental platform featuring thermal drift compensation under ambient conditions and generated a pulsed magnetic field gradient of up to 13.5 G/$μ$m. By implementing the Fourier magnetic imaging protocol, we achieved localization of a single nitrogen-vacancy center with a spatial resolution of 0.28 $\pm$ 0.10 nm and a magnetic field measurement deviation of 9 nT. This technique holds potential for applications such as localizing spins within proteins and cells.

quant-pharXiv:2603.22718•Mar 25, 2026

Development of Nitrogen Vacancy Diamond Centers for Nanoscale Sensing of Physical and Biological Materials

Michael P. Lake

The NV defect center in diamond forms a pseudo-atomic quantum system with discreet optically excitable transitions between ground and excited states in the gap between valence and conduction bands, making the NV center a deep-level defect center in diamond. For the negatively charged NV center (NV-), both the ground and excited states are spin triplets (S=1) and coupling between optical and spin states provides unique opportunities for optical detection of magnetic resonance (ODMR) and quantum metrology under ambient conditions. As an atomically sized point defect that is stable in single nanodiamonds as small as a few nanometers, the NV center enables spin based imaging of temperature, electric fields, magnetic fields and mechanical strain with nanoscale spatial resolution. Made of carbon, nanodiamonds are also ideal nanoparticles for use in biological systems, exhibiting extremely low cytotoxicity, no photo bleaching and exceptional contrast in transmission electron and light microscopy. With the ability to act as both a passive, non perturbing sensor (e.g. a diamagnetic material used for sensing magnetic fields) and a connection point for two way, direct coupling of far field optics to NV$^-$ spins and indirectly to the highly localized neighborhood of atoms, electronic states and phonon modes in the local vicinity, NV diamond provides a route to nanoscale field sensing and spin based optical microscopy. These sensors are also stable in nanodiamonds. For nanoparticles, the reduction in particle diameter dramatically enhances the proportion of the material that is surface exposed, enhancing any surface related properties. Nitrogen Vacancy centers in nanodiamonds provide another example of material properties that vary with particle size. In chapter 5, evidence that modulation of nanodiamonds fluorescent emissions by electrical perturbations in their surrouding environment allows transduction of local electrodynamics into a far field optical signal capable of mapping action potentials in cardiomyocytes in presented. The unifying theme for all of the work presented in this dissertation is to enable the use of magnetic resonance signals and interactions for imaging and sensing in previously inaccessible regimes. The specific focus is on methods and techniques to enable nanoscale physical sensing and functional imaging in live tissues, with the ultimate aim to lay the predicate for the combination of both without compromise.

•Jan 1, 2018•0 citations
Due to progressing miniaturization, material fatigue is expected to gain importance on microscopic scales. Nevertheless, most non-destructive testing techniques are optimized for macroscopic scales. Therefore, new approaches applicable to miniaturized samples need to be explored. High spatial resolution imaging of a material's magnetic stray field enables sensitive detection of microstructural changes due to the local interplay of magnetic properties, strain, and defects. Up to now, this approach has rarely been used for materials testing since high-resolution magnetic sensing is traditionally challenging. Novel quantum sensing techniques offer the potential to close this gap. One of the most prominent quantum sensors, the nitrogen vacancy center in diamond, is investigated for non-destructive testing applications within the scope of this work. An experimental system based on a widefield sensing approach was developed to image magnetic stray field distributions within seconds to minutes over areas up to 1 x 1 mm2mm^2mm2. Magnetic sensitivities below 10 μμμT/Hz\sqrt{\text{Hz}}Hz​ and a spatial resolution of 1-2 μμμm were achieved. The technique offers high mechanical stability, which is crucial for non-destructive testing applications. Comparison with magneto-optical Kerr effect measurements showed that the magnetic field maps are strongly correlated with the material's surface domains while containing additional information from deeper inside the sample. Characteristic changes in the magnetic stray field distribution were detected in an electrical steel sample after cyclic loading. A potential marker for early fatigue damage was deduced from the splitting gradient distribution, while 2D Fourier transform analysis provided additional insight.
Can widefield NV-center magnetometry detect microscopic fatigue-related changes in ferromagnetic materials before visible damage appears? This paper investigates this question using near-surface NV ensembles in diamond to image stray fields from polished iron and electrical steel, including steel subjected to controlled cyclic loading.
The apparatus achieves magnetic imaging resolution below 2 μm2\,\mu\mathrm{m}2μm and sensitivity below 10 μT/Hz10\,\mu\mathrm{T}/\sqrt{\mathrm{Hz}}10μT/Hz​. Full pixel-resolved ODMR maps take approximately five minutes; fixed-frequency fluorescence imaging reproduces many features in nine seconds. Comparisons with optical microscopy and magneto-optical Kerr imaging associate measured features with grains and domain boundaries. Magnetostatic simulations examine sensor–sample separation, optical resolution, and NV orientation, suggesting sensitivity to magnetic structures within the first few micrometres beneath the surface.
For electrical steel loaded at a reported stress amplitude of 120 MPa120\,\mathrm{MPa}120MPa, stress ratio R=0.1R=0.1R=0.1, and 60 Hz60\,\mathrm{Hz}60Hz, maps after 5×1065\times10^65×106 cycles contain finer features than after 5×1045\times10^45×104 cycles. Across three measurement positions, splitting-gradient histograms shift toward higher gradients, proposed as a potential early-fatigue marker. Two-dimensional Fourier analysis additionally tracks evolving feature size and directionality.
Interpretation remains limited: overlapping resonances from four NV orientations produce artifacts rather than an unambiguous vector-field map; subsurface contributions are inferred rather than independently resolved; and three-dimensional magnetization reconstruction is nonunique. Microscopic defects causing the changes are not directly identified. Performance requires close alignment to flat samples, while strong stray fields from hard magnets can quench fluorescence. Further simulations and measurements are needed to establish the relation between magnetic signatures and fatigue damage.
Many spintronic, magnetic-memory, and neuromorphic devices rely on spatially varying magnetic fields. Quantitatively imaging these fields with full vector information over extended areas remains a major challenge. Existing probes either offer nanoscale resolution at the cost of slow scanning, or widefield imaging with limited vector sensitivity or material constraints. Quantum sensing with nitrogen-vacancy (NV) centers in diamond promises to bridge this gap, but a practical camera-based vector magnetometry implementation on relevant microstructures has not been demonstrated. Here we adapt a commercial widefield microscope to implement a camera-compatible pulsed optically detected magnetic resonance protocol to reconstruct stray-field vectors from microscale devices. By resolving the Zeeman shifts of the four NV orientations, we reconstruct the stray-field vector generated by microfabricated permalloy structures that host multiple stable remanent states. Our implementation achieves a spatial resolution of ≈0.52 μm\approx 0.52 ~μ\mathrm{m}≈0.52 μm across an 83 μm×83 μm83~μ\mathrm{m} \times 83~μ\mathrm{m}83 μm×83 μm field of view and a peak sensitivity of $ (828 \pm 142)~\mathrm{nT\,Hz^{-1}}$, with acquisition times of only a few minutes. These results establish pulsed widefield NV magnetometry on standard microscopes as a practical and scalable tool for routine vector-resolved imaging of complex magnetic devices.
In modern-day quantum metrology, quantum sensors are widely employed to detect weak magnetic fields or nanoscale signals. Quantum devices, exploiting quantum coherence, are inevitably connected to physical constants and can achieve accuracy, repeatability, and precision approaching fundamental limits. As a result, these sensors have shown utility in a wide range of research domains spanning both science and technology. A rapidly emerging quantum sensing platform employs atomic-scale defects in crystals. In particular, magnetometry using nitrogen-vacancy (NV) color centers in diamond has garnered increasing interest. NV systems possess a combination of remarkable properties, optical addressability, long coherence times, and biocompatibility. Sensors based on NV centers excel in spatial resolution and magnetic sensitivity. These diamond-based sensors promise comparable combination of high spatial resolution and magnetic sensitivity without cryogenic operation. The above properties of NV magnetometers promise increasingly integrated quantum measurement technology, as a result, they have been extensively developed with various protocols and find use in numerous applications spanning materials characterization, nuclear magnetic resonance (NMR), condensed matter physics, paleomagnetism, neuroscience and living systems biology, and industrial vector magnetometry. In this chapter, NV centers are explored for magnetic sensing in a number of contexts. In general, we introduce novel regimes for magnetic-field probes with NV ensembles. Specifically, NV centers are developed for sensitive magnetometers for applications where microwaves (MWs) are prohibitively invasive and operations need to be carried out under zero ambient magnetic field. The primary goal of our discussion is to improve the utility of these NV center-based magnetometers.
The recent decade has witnessed exciting developments in quantum science and technology. Quantum sensing is a rapidly growing branch, which exploits the fragility of quantum systems to detect small external signals. The extreme control at the single-atom level and the remarkably long coherence time of engineered quantum systems enable unprecedented sensitivity and precision, beating the performance of classical techniques. The nitrogen-vacancy (NV) center in diamond is one of the most promising quantum sensors. Its unique advantages have attracted considerable attention, including a long spin coherence time throughout a broad temperature range, nanoscale resolution limited by the sensor-sample distance, convenient optical control of its spin states and remarkably versatile sensing capabilities. Its properties are well studied under a bias magnetic field oriented along its quantization axis. However, its sensing capabilities in the presence of an off-axis magnetic field are much less explored. My research aims to unlock the full potential of NV quantum sensor by developing new sensing modalities under a magnetic field acting perpendicular to the NV axis, and furthermore, integrating them into a scanning probe microscope. In this dissertation, I will report our progress toward building a scanning NV multimodal quantum imaging platform, which will open up exciting opportunities in measuring nanoscale phenomena. The first chapter provides an introduction to the background of quantum sensing with NV centers, followed by a discussion on its basic properties and established sensing techniques. The second and third chapters are dedicated to two experiments performed under a perpendicular magnetic field where traditional NV magnetometry based on the Zeeman effect fails. In the second chapter, I will introduce a new sensing strategy that uses the entanglement between the electron and nuclear spins to restore the magnetic field sensitivity under this unfavored condition. This allows us to sense small changes in the magnetic field angle relative to the NV axis, and to detect anisotropic magnetic noise in the local environment. In the third chapter, I will present our latest development of scanning NV electrometry, where a single NV at the apex of a diamond scanning probe images external alternating (AC) and direct (DC) electric fields with sub-100 nm resolution. In the last chapter, I will discuss our efforts on four experiments that were left unfinished. I will present the results we have achieved, analyze the challenges that we faced and propose potential solutions to overcome them.
Devices that detect and spatially image magnetic fields are important in many areas of study including chemistry, electronics, materials science and biology. By extending the boundaries of what is currently achievable we may begin to explore areas previously inaccessible to science, such as wide-field imaging of neuron signaling or structural determination of single molecules. Here we present experimental progress towards the development of a nanoscale magnetic sensor operating under ambient conditions using the nitrogen-vacancy (NV) centre in diamond. This thesis describes the construction of a lab-built, confocal microscope capable of detecting single NV centres, with additional microwave control for coherent manipulation of the NV spin. The feasibility of using NV-diamond for real-time detection of the action potential generated by a neuron, and with high spatial resolution is experimentally demonstrated. The quantum coherence of single NV spins is monitored in various chemical solutions, and detection of nanoscale magnetic environments external to the diamond are demonstrated. This work sets the experimental foundation for using manufactured single quantum systems as sensitive probes of external chemical environments. In addition, the first measurements of single quantum coherent spins inside living cells are performed with NV centres in nanodiamonds. These studies on NV centres inside living cells demonstrate their promise as magnetic sensors for biology. Furthermore, alternative quantum sensing technologies emerge including rotational tracking of nanodiamonds and enhanced identification of fluorescent nanoparticles.
Solid-state spins in diamond are promising building blocks for quantum computing and quantum sensing, both of which require precise nanoscale addressing of individual spins. To explore the resolution limit of this approach, we demonstrate Fourier magnetic imaging of nitrogen-vacancy centers in diamond under state-of-the-art conditions. We constructed a highly compact experimental platform featuring thermal drift compensation under ambient conditions and generated a pulsed magnetic field gradient of up to 13.5 G/μμμm. By implementing the Fourier magnetic imaging protocol, we achieved localization of a single nitrogen-vacancy center with a spatial resolution of 0.28 ±\pm± 0.10 nm and a magnetic field measurement deviation of 9 nT. This technique holds potential for applications such as localizing spins within proteins and cells.
The NV defect center in diamond forms a pseudo-atomic quantum system with discreet optically excitable transitions between ground and excited states in the gap between valence and conduction bands, making the NV center a deep-level defect center in diamond. For the negatively charged NV center (NV-), both the ground and excited states are spin triplets (S=1) and coupling between optical and spin states provides unique opportunities for optical detection of magnetic resonance (ODMR) and quantum metrology under ambient conditions. As an atomically sized point defect that is stable in single nanodiamonds as small as a few nanometers, the NV center enables spin based imaging of temperature, electric fields, magnetic fields and mechanical strain with nanoscale spatial resolution. Made of carbon, nanodiamonds are also ideal nanoparticles for use in biological systems, exhibiting extremely low cytotoxicity, no photo bleaching and exceptional contrast in transmission electron and light microscopy. With the ability to act as both a passive, non perturbing sensor (e.g. a diamagnetic material used for sensing magnetic fields) and a connection point for two way, direct coupling of far field optics to NV−^-− spins and indirectly to the highly localized neighborhood of atoms, electronic states and phonon modes in the local vicinity, NV diamond provides a route to nanoscale field sensing and spin based optical microscopy. These sensors are also stable in nanodiamonds. For nanoparticles, the reduction in particle diameter dramatically enhances the proportion of the material that is surface exposed, enhancing any surface related properties. Nitrogen Vacancy centers in nanodiamonds provide another example of material properties that vary with particle size. In chapter 5, evidence that modulation of nanodiamonds fluorescent emissions by electrical perturbations in their surrouding environment allows transduction of local electrodynamics into a far field optical signal capable of mapping action potentials in cardiomyocytes in presented. The unifying theme for all of the work presented in this dissertation is to enable the use of magnetic resonance signals and interactions for imaging and sensing in previously inaccessible regimes. The specific focus is on methods and techniques to enable nanoscale physical sensing and functional imaging in live tissues, with the ultimate aim to lay the predicate for the combination of both without compromise.