Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2609.08811

Dual-Trigger of Series Nanowire Detector for Event-Based Photon Number Assignment

Stefanie Grotowski, Daniel Landes, Fabian Wietschorke, Paul Pucknus, Rasmus Flaschmann, Torsten Langer, Torsten Krause, Kai Müller, Jonathan J. Finley

quant-phSubmitted Sep 8, 2026• Announced Sep 9, 2026• 0 citations
arXivHTMLPDF

Abstract

Photon-number-resolving (PNR) detectors are essential components of photonic quantum technologies. However, conventional single-channel edge-triggered readout struggles to resolve the photon number $n$ in real time or to characterize how timing jitter depends on $n$. In this work, we use a dual-trigger method on a three-pixel series-connected superconducting nanowire single-photon detector (SNSPD) that triggers on both the rising and falling edges of the detection pulse. By doing so, we preserve the precise arrival time of the detection event while mapping the photon number onto the time interval between the rising and falling edges, allowing clear separation of the events. Using this technique, we assign each detection event to $n = 1, 2,$ or 3 photons with $99\,\%$ posterior confidence across all three classes. The timing jitter decreases as $n$ increases, reaching values below $41\, \text{ps}$ for $n \geq 2$. Comparing edge-triggering with constant-fraction discrimination (CFD) for arrival-time extraction, we find that CFD yields lower jitter for single-photon events and a nearly constant mean arrival time. Altogether, our results establish dual-triggering as a robust, low-latency readout scheme for PNR detectors, while revealing a photon-number dependence of the timing jitter relevant to timing precision achievable in heralded photonic quantum applications.

Related papers

Practical considerations for assignment of photon numbers with SNSPDs

Timon Schapeler, Isabell Mischke, Fabian Schlue +4 more

Superconducting nanowire single-photon detectors (SNSPDs) can enable photon-number resolution (PNR) based on accurate measurements of the detector’s response time to few-photon optical pulses. In this work, we investigate the impact of the optical pulse shape and duration on the accuracy of this method. We find that Gaussian temporal pulse shapes yield cleaner arrival-time histograms and, thus, more accurate PNR, compared to bandpass-filtered pulses of equal bandwidth. For low system jitter and an optical pulse duration comparable to the other jitter contributions, photon numbers can be discriminated in our system with a commercial SNSPD. At 60 ps optical pulse duration, photon-number discrimination is significantly reduced. Furthermore, we highlight the importance of using the correct arrival-time histogram model when analyzing photon-number assignment. Using exponentially modified Gaussian distributions, instead of the commonly used Gaussian distributions, we can more accurately determine photon-number misidentification probabilities. Finally, we reconstruct the positive operator-valued measures of the detector, revealing sharp features that indicate the intrinsic PNR capabilities.

arXiv:2510.00714•APL Quantum•Jan 2, 2026•7 citations

High-fidelity 0, 1 and 2 photon-number resolution in superconducting nanowire single-photon detectors for pulsed light

Fabio Auriemma, S M Junaid Bukhari, Daniela Salvoni +2 more

Abstract We experimentally demonstrate high-fidelity detection of 0, 1- and 2-photon states in a commercial superconducting nanowire single photon detector (SNSPD) under 20 MHz pulsed coherent illumination. The arrival of a different number of photons induces distinct temporal dynamics in the disruption of the superconducting state of the detector. Therefore, specific features emerge in the arrival-time histograms, that we show are directly correlated with the photon-number state. We show that, across a broad range of time-averaged light intensities, the probabilities of detecting 1- and 2 + -photon events collapse onto the Poisson distribution of coherent light. We identify the voltage detection threshold as a critical factor for photon number resolving (PNR) capabilities. Even under demanding conditions of high repetition rate illumination, we found that a high trigger level significantly enhances total detection fidelity, achieving 0.920 and 0.845 for 1-photon and for 2-photon events. These results correspond to remarkably low conditional misidentification probabilities, 0.000 02 and 0.0013, describing the classification error among detected 1- and 2-photon events. We identify an inherent 39 ps latency difference between single- and multi-photon detection events. We show that the measured 2-photon conditional misidentification probability corresponds to the one of a multiplexed PNR detector with 730 pixels. We believe that our findings provide a framework for developing high/fidelity spatially multiplexed SNSPD by exploiting the intrinsic PNR capabilities of individual constituting elements.

Superconductor Science and Technology•Sep 29, 2026•0 citations

Resolving Photon Numbers Using Ultra-High-Resolution Timing of a Single Low-Jitter Superconducting Nanowire Detector

Sauer, Gregor, Mirco Kolarczik, Rodrigo Gómez +2 more

Photon-number-resolving (PNR) detectors are a key enabling technology in photonic quantum information processing. Here, we demonstrate the PNR capacity of conventional superconducting nanowire single-photon detectors by performing ultra-high-resolution time-tagging of the detector-generated electrical pulses. This method provides a viable approach for PNR with high detection efficiency and a high operational repetition rate. We present the implementation of such a PNR detector in the telecom C-band and its characterization by measuring the photon-number statistics of coherent light with tunable intensity. Additionally, we demonstrate the capabilities of the detection method by measuring photon-number correlations of non-classical states.

arXiv:2310.12472•Oct 19, 2023•18 citations

Kinetic inductance and jitter dependence of intrinsic photon-number resolution in superconducting nanowire single-photon detectors

Roland Jaha, Connor A. Graham-Scott, Adrian S. Abazi +3 more

Photon-number resolution (PNR) is crucial in quantum information technology. Time-resolved measurements applied to superconducting nanowire single-photon detectors (SNSPDs) have recently demonstrated intrinsic PNR capabilities, complementing their superior efficiency, speed, and timing precision. Using waveguide-integrated SNSPDs, we investigate the impact of nanowire kinetic inductance and system jitter on intrinsic PNR, identifying the trade-off between intrinsic PNR and detector speed. Increasing the kinetic inductance from 165 nH to 872 nH enhances the PNR quality by 12%, 31%, and 23% for the first three photon numbers but reduces the maximum count rate from 165 Mcps to 19 Mcps.

arXiv:2410.23162•Optics Express•Aug 5, 2025•7 citations

Photon-Number-Resolving Single-Photon Detector with a System Detection Efficiency of 98% and Photon-Number Resolution of 32

Chaomeng Ding, Xing-Yu Zhang, Jia-Min Xiong +8 more

High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.

arXiv:2504.02202•ACS Photonics•Jul 4, 2025•24 citations

Characterize the Speed of a Photon-Number-Resolving Superconducting Nanowire Detector

Tao Xu, Hao Hao, Xiang Li +8 more

Superconducting series nanowire single-photon detectors (SNDs) have been used for resolving photon numbers. But it can also exhibit a higher counting rate than a single superconducting nanowire single-photon detector (SNSPD), because the serial architecture allows multiple detectors working in parallel and the inductance of each pixel is reduced. In this paper, we found each pixel of the SND could reset fast although the whole detector took a much longer time for recovering. Therefore, the speed of an SND with a large kinetic inductance of 1.25 μH was characterized and compared to a standard SNSPD with the same total inductance. By measuring the detected photon rate over the input photon rate, we obtained a photon counting rate enhancement by 7.5 times. Meanwhile, the timing jitter of the SND was 63 ps at single photon detection regime. Our results show that the series structure and the readout scheme are quite practical in realizing high speed single-photon detectors besides resolving photon numbers.

IEEE photonics journal•Jul 28, 2020•12 citations
Photon-number-resolving (PNR) detectors are essential components of photonic quantum technologies. However, conventional single-channel edge-triggered readout struggles to resolve the photon number nnn in real time or to characterize how timing jitter depends on nnn. In this work, we use a dual-trigger method on a three-pixel series-connected superconducting nanowire single-photon detector (SNSPD) that triggers on both the rising and falling edges of the detection pulse. By doing so, we preserve the precise arrival time of the detection event while mapping the photon number onto the time interval between the rising and falling edges, allowing clear separation of the events. Using this technique, we assign each detection event to n=1,2,n = 1, 2,n=1,2, or 3 photons with 99 %99\,\%99% posterior confidence across all three classes. The timing jitter decreases as nnn increases, reaching values below 41 ps41\, \text{ps}41ps for n≥2n \geq 2n≥2. Comparing edge-triggering with constant-fraction discrimination (CFD) for arrival-time extraction, we find that CFD yields lower jitter for single-photon events and a nearly constant mean arrival time. Altogether, our results establish dual-triggering as a robust, low-latency readout scheme for PNR detectors, while revealing a photon-number dependence of the timing jitter relevant to timing precision achievable in heralded photonic quantum applications.
Superconducting nanowire single-photon detectors (SNSPDs) can enable photon-number resolution (PNR) based on accurate measurements of the detector’s response time to few-photon optical pulses. In this work, we investigate the impact of the optical pulse shape and duration on the accuracy of this method. We find that Gaussian temporal pulse shapes yield cleaner arrival-time histograms and, thus, more accurate PNR, compared to bandpass-filtered pulses of equal bandwidth. For low system jitter and an optical pulse duration comparable to the other jitter contributions, photon numbers can be discriminated in our system with a commercial SNSPD. At 60 ps optical pulse duration, photon-number discrimination is significantly reduced. Furthermore, we highlight the importance of using the correct arrival-time histogram model when analyzing photon-number assignment. Using exponentially modified Gaussian distributions, instead of the commonly used Gaussian distributions, we can more accurately determine photon-number misidentification probabilities. Finally, we reconstruct the positive operator-valued measures of the detector, revealing sharp features that indicate the intrinsic PNR capabilities.
Abstract We experimentally demonstrate high-fidelity detection of 0, 1- and 2-photon states in a commercial superconducting nanowire single photon detector (SNSPD) under 20 MHz pulsed coherent illumination. The arrival of a different number of photons induces distinct temporal dynamics in the disruption of the superconducting state of the detector. Therefore, specific features emerge in the arrival-time histograms, that we show are directly correlated with the photon-number state. We show that, across a broad range of time-averaged light intensities, the probabilities of detecting 1- and 2 + -photon events collapse onto the Poisson distribution of coherent light. We identify the voltage detection threshold as a critical factor for photon number resolving (PNR) capabilities. Even under demanding conditions of high repetition rate illumination, we found that a high trigger level significantly enhances total detection fidelity, achieving 0.920 and 0.845 for 1-photon and for 2-photon events. These results correspond to remarkably low conditional misidentification probabilities, 0.000 02 and 0.0013, describing the classification error among detected 1- and 2-photon events. We identify an inherent 39 ps latency difference between single- and multi-photon detection events. We show that the measured 2-photon conditional misidentification probability corresponds to the one of a multiplexed PNR detector with 730 pixels. We believe that our findings provide a framework for developing high/fidelity spatially multiplexed SNSPD by exploiting the intrinsic PNR capabilities of individual constituting elements.
Photon-number-resolving (PNR) detectors are a key enabling technology in photonic quantum information processing. Here, we demonstrate the PNR capacity of conventional superconducting nanowire single-photon detectors by performing ultra-high-resolution time-tagging of the detector-generated electrical pulses. This method provides a viable approach for PNR with high detection efficiency and a high operational repetition rate. We present the implementation of such a PNR detector in the telecom C-band and its characterization by measuring the photon-number statistics of coherent light with tunable intensity. Additionally, we demonstrate the capabilities of the detection method by measuring photon-number correlations of non-classical states.
Photon-number resolution (PNR) is crucial in quantum information technology. Time-resolved measurements applied to superconducting nanowire single-photon detectors (SNSPDs) have recently demonstrated intrinsic PNR capabilities, complementing their superior efficiency, speed, and timing precision. Using waveguide-integrated SNSPDs, we investigate the impact of nanowire kinetic inductance and system jitter on intrinsic PNR, identifying the trade-off between intrinsic PNR and detector speed. Increasing the kinetic inductance from 165 nH to 872 nH enhances the PNR quality by 12%, 31%, and 23% for the first three photon numbers but reduces the maximum count rate from 165 Mcps to 19 Mcps.
High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.
Superconducting series nanowire single-photon detectors (SNDs) have been used for resolving photon numbers. But it can also exhibit a higher counting rate than a single superconducting nanowire single-photon detector (SNSPD), because the serial architecture allows multiple detectors working in parallel and the inductance of each pixel is reduced. In this paper, we found each pixel of the SND could reset fast although the whole detector took a much longer time for recovering. Therefore, the speed of an SND with a large kinetic inductance of 1.25 μH was characterized and compared to a standard SNSPD with the same total inductance. By measuring the detected photon rate over the input photon rate, we obtained a photon counting rate enhancement by 7.5 times. Meanwhile, the timing jitter of the SND was 63 ps at single photon detection regime. Our results show that the series structure and the readout scheme are quite practical in realizing high speed single-photon detectors besides resolving photon numbers.