Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2609.02503

Single-Shot Fidelity Reveals Hard and Soft Limits: A Universal Yardstick for Photon-Number-Resolving Detectors

Tetsuya Tsuruta, Akio Yoshizawa, Daiji Fukuda

quant-phphysics.opticsSubmitted Sep 2, 2026• Announced Sep 3, 2026• 0 citations
arXivHTMLPDF

Abstract

Photon-number-resolving (PNR) detectors are essential for photonic quantum computing, where a single measurement outcome must reliably herald a specific quantum state. However, detector fidelity is conventionally evaluated using ensemble-averaged statistics obtained from many measurements, which can remain high even when individual photon-number assignments are frequently misidentified. Here we introduce a universal single-shot fidelity that directly quantifies the probability of correctly identifying a photon number in a single measurement. The framework combines an efficiency-based POVM with a resolution-driven confusion matrix derived from the detector response, allowing photon loss and photon-number misidentification to be treated separately and then recombined into a single operational metric. This distinction reveals two fundamentally different limitations. Detection-efficiency loss represents an unrecoverable hardware constraint, whereas resolution-driven misidentification can be reduced by introducing a rejection region, trading generation rate for confidence. Because the metric is defined independently of detector architecture, it enables direct comparison between energy-resolving detectors such as transition-edge sensors and multiplexed click-based detectors on the same footing. Applying the framework to calibration data from three distinct detector architectures, we demonstrate quantitative comparison across photon-number regimes relevant to both discrete-variable and continuous-variable photonic quantum computing. The resulting benchmark provides a common operational metric for evaluating photon-number-resolving detectors and connecting detector performance to photonic quantum-computing requirements.

Related papers

Certification of the genuine resolution of photon number resolving detectors

Jef Pauwels, Towsif Taher, Roope Uola +3 more

Photon-number-resolving (PNR) detectors are essential components of photonic quantum technologies, yet thus far, no practical metric exists to certify how many photons they can genuinely resolve in a single measurement. Here we introduce an operational framework for quantifying the capability of a PNR detector to distinguish between different numbers of photons, i.e. its genuine resolution. In turn, we develop a practical and scalable protocol for certifying the genuine resolution of a detector, which is based on coherent state probes. We apply the method to a 28-pixel photon-number-resolving superconducting nanowire single-photon detector (PNR-SNSPD) and certify genuine four-outcome resolution. Our work highlights the critical requirements in terms of detector efficiency towards achieving high genuine resolution. This approach provides an operational benchmark for PNR detectors and fills a crucial gap in the characterization of photonic quantum devices.

quant-pharXiv:2606.14365•Jun 15, 2026•0 citations

Evaluating the performance of photon-number-resolving detectors

Mattias Jönsson, Gunnar G. Bjork

We analyze the performance of photon-number-resolving (PNR) detectors and introduce a figure of merit for the accuracy of such detectors. This figure of merit is the (worst-case) probability that the photon-number-resolving detector correctly predicts the input photon number. Simulations of various PNR detectors based on multiplexed single-photon ``click detectors'' is performed. We conclude that the required quantum efficiency is very high in order to achieve even moderate (up to a handful) photon resolution, we derive the required quantum efficiency as a function of the the maximal photon number one wants to resolve, and we show that the number of click detectors required grows quadratically with the maximal number of photons resolvable.

arXiv:1812.05422•Physical Review A•Apr 16, 2019•53 citations

Single-shot number-resolved detection of microwave photons with error mitigation

Jacob C. Curtis, Connor T. Hann, Salvatore S. Elder +4 more

Single-photon detectors are ubiquitous and integral components of photonic quantum cryptography, communication, and computation. Many applications, however, require not only detecting the presence of any photons, but distinguishing the number present with a single shot. Here, we implement a single-shot, high-fidelity photon number-resolving detector of up to 15 microwave photons in a cavity-qubit circuit QED platform. This detector functions by measuring a series of generalized parity operators, which make up the bits in the binary decomposition of the photon number. Our protocol consists of successive, independent measurements of each bit by entangling the ancilla with the cavity, then reading out and resetting the ancilla. Photon loss and ancilla readout errors can flip one or more bits, causing nontrivial errors in the outcome, but these errors have a traceable form, which can be captured in a simple hidden Markov model. Relying on the independence of each bit measurement, we mitigate biases in ensembles of measurements, showing good agreement with the predictions of the model. The mitigation improves the average total variation distance error of Fock states from $13.5%$--$1.1%$. We also show that the mitigation is efficiently scalable to an $M$-mode system provided that the errors are independent and sufficiently small. Our work motivates the development of new algorithms that utilize single-shot, high-fidelity PNR detectors.

arXiv:2010.04817•Physical Review A•Feb 9, 2021•24 citations

Theory framework of multiplexed photon-number-resolving detectors

Xiaobin Zhao, Hezheng Qin, Hong X. Tang +2 more

Photon counting is a fundamental component in quantum optics and quantum information. However, implementing ideal photon-number-resolving (PNR) detectors remains experimentally challenging. Multiplexed PNR detection offers a scalable and practical alternative by distributing photons across multiple modes and detecting their presence using simple ON-OFF detectors, thereby enabling approximate photon-number resolution. In this work, we establish a theoretical model for such detectors and prove that the estimation error in terms of photon number moments decreases inverse proportionally to the number of detectors. Thanks to the enhanced PNR capability, multiplexed PNR detector provides an advantage in cat-state breeding protocols. Assuming a two-photon subtraction case, $7$dB of squeezing, and an array of 20 detectors of efficiency $95\%$, our calculation predicts fidelity $\sim0.88$ with a success probability $\sim 3.8\%$, representing orders-of-magnitude improvement over previous works. Similar enhancement also extends to cat-state generation with the generalized photon number subtraction. With experimentally feasible parameters, our results suggest that megahertz-rate cat-state generation is achievable using an on-chip array of \emph{tens} of ON-OFF detectors.

arXiv:2507.05554•Physical Review A•Jan 9, 2026•0 citations

Photon number resolving detection with a single-photon detector and adaptive storage loop

Nicholas M. Sullivan, Boris Braverman, Jeremy Upham +1 more

Abstract Photon number resolving (PNR) measurements are beneficial or even necessary for many applications in quantum optics. Unfortunately, PNR detectors are usually large, slow, expensive, and difficult to operate. However, if the input signal is multiplexed, photon ‘click’ detectors, that lack an intrinsic PNR capability, can still be used to realize photon number resolution. Here, we investigate the operation of a single click detector, together with a storage line with tunable outcoupling. Using adaptive feedback to adjust the storage outcoupling rate, the dynamic range of the detector can in certain situations be extended by up to an order of magnitude relative to a purely passive setup. An adaptive approach can thus allow for photon number variance below the quantum shot noise limit under a wider range of conditions than using a passive multiplexing approach. This can enable applications in quantum enhanced metrology and quantum computing.

arXiv:2311.13515•New Journal of Physics•Apr 1, 2024•9 citations

Improving the loss threshold for quantum advantage in photonic sensors by complete photon counting

Gerard J. Machado, Yazeed K. Alwehaibi, Guillaume Thekkadath +9 more

Tolerance to imperfections is a defining performance criterion for quantum sensors. The threshold for achieving a quantum advantage depends on the input state, sensor configuration, detection scheme, and, critically for optical platforms, photon loss. We consider a nonlinear interferometer in which two gain-optimized parametric nonlinear optical processes couple the state to the internal sensor and subsequently mix the reference and sensor beams. We demonstrate that measuring the full photon-number output statistics of this setup yields marked improvements in the loss threshold. Using photon-number-resolving detection (PNRD) based on transition-edge sensors (TESs), we experimentally reconstruct the joint photon-number statistics at the interferometer output. Subject to internal and external losses of approximately 25 % and 45 %, respectively -- and without any post-selection or loss correction -- we observe an unconditional violation of the shot-noise limit by $2.37 \pm 0.11$ dB. This translates to a 44 % enhancement in estimation precision over conventional click-detection strategies. We verify this performance by evaluating the classical Fisher information against both an analytical model of the joint photon-number distribution and the raw measured statistics. Ultimately, our results demonstrate that combining nonlinear interferometry with PNRD unlocks metrological information fundamentally inaccessible to click detectors, establishing a clear path toward practical, quantum-enhanced sensing under realistic loss conditions.

quant-pharXiv:2606.30761•Jul 1, 2026•2 citations
Photon-number-resolving (PNR) detectors are essential for photonic quantum computing, where a single measurement outcome must reliably herald a specific quantum state. However, detector fidelity is conventionally evaluated using ensemble-averaged statistics obtained from many measurements, which can remain high even when individual photon-number assignments are frequently misidentified. Here we introduce a universal single-shot fidelity that directly quantifies the probability of correctly identifying a photon number in a single measurement. The framework combines an efficiency-based POVM with a resolution-driven confusion matrix derived from the detector response, allowing photon loss and photon-number misidentification to be treated separately and then recombined into a single operational metric. This distinction reveals two fundamentally different limitations. Detection-efficiency loss represents an unrecoverable hardware constraint, whereas resolution-driven misidentification can be reduced by introducing a rejection region, trading generation rate for confidence. Because the metric is defined independently of detector architecture, it enables direct comparison between energy-resolving detectors such as transition-edge sensors and multiplexed click-based detectors on the same footing. Applying the framework to calibration data from three distinct detector architectures, we demonstrate quantitative comparison across photon-number regimes relevant to both discrete-variable and continuous-variable photonic quantum computing. The resulting benchmark provides a common operational metric for evaluating photon-number-resolving detectors and connecting detector performance to photonic quantum-computing requirements.
Photon-number-resolving (PNR) detectors are essential components of photonic quantum technologies, yet thus far, no practical metric exists to certify how many photons they can genuinely resolve in a single measurement. Here we introduce an operational framework for quantifying the capability of a PNR detector to distinguish between different numbers of photons, i.e. its genuine resolution. In turn, we develop a practical and scalable protocol for certifying the genuine resolution of a detector, which is based on coherent state probes. We apply the method to a 28-pixel photon-number-resolving superconducting nanowire single-photon detector (PNR-SNSPD) and certify genuine four-outcome resolution. Our work highlights the critical requirements in terms of detector efficiency towards achieving high genuine resolution. This approach provides an operational benchmark for PNR detectors and fills a crucial gap in the characterization of photonic quantum devices.
We analyze the performance of photon-number-resolving (PNR) detectors and introduce a figure of merit for the accuracy of such detectors. This figure of merit is the (worst-case) probability that the photon-number-resolving detector correctly predicts the input photon number. Simulations of various PNR detectors based on multiplexed single-photon ``click detectors'' is performed. We conclude that the required quantum efficiency is very high in order to achieve even moderate (up to a handful) photon resolution, we derive the required quantum efficiency as a function of the the maximal photon number one wants to resolve, and we show that the number of click detectors required grows quadratically with the maximal number of photons resolvable.
Single-photon detectors are ubiquitous and integral components of photonic quantum cryptography, communication, and computation. Many applications, however, require not only detecting the presence of any photons, but distinguishing the number present with a single shot. Here, we implement a single-shot, high-fidelity photon number-resolving detector of up to 15 microwave photons in a cavity-qubit circuit QED platform. This detector functions by measuring a series of generalized parity operators, which make up the bits in the binary decomposition of the photon number. Our protocol consists of successive, independent measurements of each bit by entangling the ancilla with the cavity, then reading out and resetting the ancilla. Photon loss and ancilla readout errors can flip one or more bits, causing nontrivial errors in the outcome, but these errors have a traceable form, which can be captured in a simple hidden Markov model. Relying on the independence of each bit measurement, we mitigate biases in ensembles of measurements, showing good agreement with the predictions of the model. The mitigation improves the average total variation distance error of Fock states from 13.513.5%13.5--1.11.1%1.1. We also show that the mitigation is efficiently scalable to an MMM-mode system provided that the errors are independent and sufficiently small. Our work motivates the development of new algorithms that utilize single-shot, high-fidelity PNR detectors.
Photon counting is a fundamental component in quantum optics and quantum information. However, implementing ideal photon-number-resolving (PNR) detectors remains experimentally challenging. Multiplexed PNR detection offers a scalable and practical alternative by distributing photons across multiple modes and detecting their presence using simple ON-OFF detectors, thereby enabling approximate photon-number resolution. In this work, we establish a theoretical model for such detectors and prove that the estimation error in terms of photon number moments decreases inverse proportionally to the number of detectors. Thanks to the enhanced PNR capability, multiplexed PNR detector provides an advantage in cat-state breeding protocols. Assuming a two-photon subtraction case, 777dB of squeezing, and an array of 20 detectors of efficiency 95%95\%95%, our calculation predicts fidelity ∼0.88\sim0.88∼0.88 with a success probability ∼3.8%\sim 3.8\%∼3.8%, representing orders-of-magnitude improvement over previous works. Similar enhancement also extends to cat-state generation with the generalized photon number subtraction. With experimentally feasible parameters, our results suggest that megahertz-rate cat-state generation is achievable using an on-chip array of \emph{tens} of ON-OFF detectors.
Abstract Photon number resolving (PNR) measurements are beneficial or even necessary for many applications in quantum optics. Unfortunately, PNR detectors are usually large, slow, expensive, and difficult to operate. However, if the input signal is multiplexed, photon ‘click’ detectors, that lack an intrinsic PNR capability, can still be used to realize photon number resolution. Here, we investigate the operation of a single click detector, together with a storage line with tunable outcoupling. Using adaptive feedback to adjust the storage outcoupling rate, the dynamic range of the detector can in certain situations be extended by up to an order of magnitude relative to a purely passive setup. An adaptive approach can thus allow for photon number variance below the quantum shot noise limit under a wider range of conditions than using a passive multiplexing approach. This can enable applications in quantum enhanced metrology and quantum computing.
Tolerance to imperfections is a defining performance criterion for quantum sensors. The threshold for achieving a quantum advantage depends on the input state, sensor configuration, detection scheme, and, critically for optical platforms, photon loss. We consider a nonlinear interferometer in which two gain-optimized parametric nonlinear optical processes couple the state to the internal sensor and subsequently mix the reference and sensor beams. We demonstrate that measuring the full photon-number output statistics of this setup yields marked improvements in the loss threshold. Using photon-number-resolving detection (PNRD) based on transition-edge sensors (TESs), we experimentally reconstruct the joint photon-number statistics at the interferometer output. Subject to internal and external losses of approximately 25 % and 45 %, respectively -- and without any post-selection or loss correction -- we observe an unconditional violation of the shot-noise limit by 2.37±0.112.37 \pm 0.112.37±0.11 dB. This translates to a 44 % enhancement in estimation precision over conventional click-detection strategies. We verify this performance by evaluating the classical Fisher information against both an analytical model of the joint photon-number distribution and the raw measured statistics. Ultimately, our results demonstrate that combining nonlinear interferometry with PNRD unlocks metrological information fundamentally inaccessible to click detectors, establishing a clear path toward practical, quantum-enhanced sensing under realistic loss conditions.