Frederik H. Knudsen, Axel Leblanc, Yiliu Li, Patrick James Strohbeen, Jechiel van Dijk, Logan S. Kusher, Arunav Bordoloi, Alisa Danilenko, Xiangchao Ma, Salva Salmani‐Rezaie, Javad Shabani
Conventional superconducting quantum electronics rely on well-established Josephson junctions made of Al/AlO$_{x}$ where the weak link AlO$_{x}$ is amorphous and is believed to host two-level systems that limit coherence. Crystalline Josephson junctions exhibit atomically ordered interface quality but remain constrained by complex fabrication and intrinsic asymmetry of epitaxial growth. Here, we demonstrate a fully epitaxial approach based on superconductivity in gallium-doped germanium, enabling the realization of Josephson junctions entirely grown in situ by molecular beam epitaxy. These devices feature atomically sharp interfaces and crystalline weak links, resulting in strong Josephson coupling in the ultra-short regime. We observe an unconventional enhancement of the switching current under applied magnetic field, which we attribute to quasiparticle-assisted thermalization processes from the Al contacts. This platform combines structural coherence, fabrication simplicity, and scalability, offering a promising route toward low-disorder, CMOS-compatible superconducting qubits in a merged element transmon architecture.
Conventional superconducting quantum electronics rely on well-established Josephson junctions made of Al/AlOx where the weak link AlOx is amorphous and is believed to host two-level systems that limit coherence. Crystalline Josephson junctions exhibit atomically ordered interface quality but remain constrained by complex fabrication and intrinsic asymmetry of epitaxial growth. Here, we demonstrate a fully epitaxial approach based on superconductivity in gallium-doped germanium, enabling the realization of Josephson junctions entirely grown in situ by molecular beam epitaxy. These devices feature atomically sharp interfaces and crystalline weak links, resulting in strong Josephson coupling in the ultra-short regime. We observe an unconventional enhancement of the switching current under applied magnetic field, which we attribute to quasiparticle-assisted thermalization processes from the Al contacts. This platform combines structural coherence, fabrication simplicity, and scalability, offering a promising route toward low-disorder, CMOS-compatible superconducting qubits in a merged element transmon architecture.
Voltage-tunable Josephson junctions (VT-JJs) are an emerging element in superconducting quantum electronics with potential to expand the functionality of conventional designs. While VT-JJs are largely compatible with wafer-scale semiconductor processing, their integration into quantum circuits remains a challenge due to unmitigated semiconductor microwave loss. Here, a deep mesa etch process, wherein the epitaxial material is removed except the VT-JJ device, will facilitate the integration of VT-JJs with low-microwave-loss circuit elements by allowing these circuit elements to be placed directly on a low-loss substrate. A germanium quantum well is grown by molecular beam epitaxy (MBE) on a float zone silicon substrate with in situ deposited aluminum contacts. This combination allows the formation of an oxide-free superconductor-semiconductor interface. The deep mesa etch process is optimized to produce a sidewall taper sufficient for continuous metal deposition from the substrate to the top of the mesa for electrostatic gate electrodes and interconnects. The fabricated Josephson junctions demonstrate gate-tunable supercurrents with a maximum critical current over 100 nA and critical-current normal-resistance product of 8.63 μV. These results demonstrate a pathway toward improved integration of voltage-tunable superconducting circuit elements with quantum electronic building blocks such as couplers and qubits.
The performance and coherence of superconducting quantum systems are fundamentally tied to the quality of the materials from which they are built. In superconducting transmon qubits, many loss mechanisms and sources of decoherence originate from material imperfections or unwanted oxide formation. Likewise, semiconductor–superconductor hybrid systems depend on high-quality interfaces to ensure strong coupling between electronic states in the two materials. In such hybrid devices, the accessible operating regime is often dictated by the intrinsic material properties of either the semiconductor or the superconductor. Advancing quantum device performance therefore requires exploring new material systems and optimizing their physical characteristics. In this thesis, we present the development of several superconducting material platforms for quantum technologies, including superconducting qubits, single-photon detectors, and semiconductor superconductor hybrid devices. We focus on the growth and characterization of superconducting films and heterostructures, and we establish clear connections between their material properties and the resulting device performance. First, we will present a novel semiconductor-superconductor hybrid material based on in-situ deposited epitaxial layers of Nb and Al on a shallow InAs quantum well. In this structure, the Al interlayer provides an epitaxial connection between an in-situ magnetron sputtered Nb or NbTi thin film and a shallow InAs two dimensional electron gas. This metal-to-metal epitaxy is achieved by optimization of the material stack and results in an induced superconducting gap of approximately 1 meV, determined from transport measurements of superconductor semiconductor Josephson junctions. This induced gap is approximately five times larger than the values reported for Al-based hybrid materials and indicates the formation of highly-transparent interfaces that are required in high-quality hybrid material platforms. Then, we discuss a different approach in the next chapter where we develop a hybrid material based on a molecular beam epitaxy grown InAsSb surface quantum well with an in-situ deposited Nb layer directly on top of the quantum well. Relative to conventional Al-InAs based systems, the InAsSb surface quantum well offers a lower effective mass and stronger spin-orbit interaction, while the Nb layer has a higher critical temperature and a larger critical magnetic field. The in-situ deposition of the Nb layer directly on top of the quantum well results in a high-quality interface that enables strong coupling to the InAsSb quantum well. Transport measurements on Josephson junctions reveal an induced superconducting gap of 1.3 meV and a critical current density of 3.75 × 10³A/cm². Furthermore, a planar asymmetric SQUID is realized, exhibiting gate-tunable superimposed oscillations originating from both the individual Josephson junction and the full SQUID loop. The large induced superconducting gap combined with strong spin-orbit interaction position this material as an attractive platform for experiments exploring gate-tunable superconductivity and topological superconducting devices. In the next chapter, we will focus on establishing a link between Nb film crystal properties and their performance in superconducting circuits. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over 10⁶ at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasi-particle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Then, we explore yet a different material platform by attempting to realize onchip NbTiN single photon detectors on LiNbO₃, an emerging photonic platform with high potential for scalable quantum information processing. We use DC reactive magnetron sputtering to grow high-quality NbTiN thin films and investigate the impact of substrate temperature during NbTiN growth. We achieve four nm thick superconducting films with a critical temperature (𝑇𝑐) of 12.3 K grown at a substrate temperature of 825 K. We demonstrate that the increased substrate temperature reduces the oxygen concentration in our films and improves the overall stoichiometry. In addition, we integrate these films with the LiNbO3 platform and investigate the obtained interface quality. Finally, we fabricate superconducting nanowire single photon detectors from the NbTiN film on LiNbO₃ and characterize the detector performance. Lastly, we report a gate-tunable Josephson diode effect in hybrid nanowire junctions consisting of a spin-orbit-coupled semiconductor core coated with epitaxial ferromagnetic insulator and superconductor shells. The wires display a hysteretic superconducting window as a function of axial magnetic field. In the superconducting regime, the devices exhibit nonreciprocal current transport, with the diode efficiency showing a strong dependence on back-gate voltage. The effect persists in a remanent magnetization state following a controlled demagnetization procedure, establishing zero-field operation. The combination of results presented in this thesis stress the importance of a material-focused approach in advancing the performance of quantum hardware. The novel hybrid material platforms developed in this thesis expand the operating regime of devices, which could enable future experiments involving gate-tunable superconductivity or topological properties. Similarly, we demonstrate that optimizing superconductor crystal structure benefits quantum devices, such as single-photon detectors and superconducting resonators.
The Josephson energy EJ is a key parameter governing the properties of transmon superconducting qubits. In Al/AlOx/Al junctions, EJ is set by electron tunneling through an ultrathin oxide barrier and therefore depends exponentially on the atomic structure of the barrier. We compute EJ by first-principles device modeling based on the NEGF-DFT quantum-transport method, comparing a junction with a crystalline Al2O3 barrier against ten junctions with melt--quenched amorphous Al2O3 barriers of the same thickness. From the Fermi-level transmission and the Ambegaokar--Baratoff relation, we obtain a mean EJ/h of 2.78 GHz for the amorphous ensemble, with a standard deviation of 4.67 GHz, compared with 0.73 GHz for the crystalline reference; individual amorphous values span nearly two orders of magnitude. Scattering-state analysis shows that transport is quantum tunneling and that the variability originates from stoichiometric inhomogeneity of the amorphous oxide: Al-rich, low-barrier regions can connect into percolation-like tunneling pathways that strongly enhance the conductance. A realistic 200×200 nm2 junction self-averages over more than 2×104 such microscopic regions. These results establish a quantitative atomistic route from oxide microstructure to the superconducting-circuit energy scale EJ.
Abstract Improving the coherence of superconducting qubits is a fundamental step towards the realization of fault-tolerant quantum computation. However, coherence times of quantum circuits made from conventional aluminum-based Josephson junctions are limited by the presence of microscopic two-level systems in the amorphous aluminum oxide tunnel barriers. Here, we have developed superconducting qubits based on NbN/AlN/NbN epitaxial Josephson junctions on silicon substrates which promise to overcome the drawbacks of qubits based on Al/AlOx/Al junctions. The all-nitride qubits have great advantages such as chemical stability against oxidation, resulting in fewer two-level fluctuators, feasibility for epitaxial tunnel barriers that reduce energy relaxation and dephasing, and a larger superconducting gap of ~5.2 meV for NbN, compared to ~0.3 meV for aluminum, which suppresses the excitation of quasiparticles. By replacing conventional MgO by a silicon substrate with a TiN buffer layer for epitaxial growth of nitride junctions, we demonstrate a qubit energy relaxation time $${T}_{1}=16.3\;{{\upmu }}{{{{{\rm{s}}}}}}$$ T 1 = 16.3 μ s and a spin-echo dephasing time $${T}_{2}=21.5\;{{\upmu }}{{{{{\rm{s}}}}}}$$ T 2 = 21.5 μ s . These significant improvements in quantum coherence are explained by the reduced dielectric loss compared to the previously reported $${T}_{1}\approx {T}_{2}\approx 0.5\;{{\upmu }}{{{{{\rm{s}}}}}}$$ T 1 ≈ T 2 ≈ 0.5 μ s of NbN-based qubits on MgO substrates. These results are an important step towards constructing a new platform for superconducting quantum hardware.
State-of-the-art superconducting qubits rely on a limited set of thin-film materials. Expanding their materials palette can improve performance, extend operating regimes, and introduce new functionalities, but conventional thin-film fabrication hinders systematic exploration of new material combinations. Van der Waals (vdW) materials offer a highly modular crystalline platform that facilitates such exploration while enabling gate-tunability, higher-temperature operation, and compact qubit geometries. Yet it remains unknown whether a fully vdW superconducting qubit can support quantum coherence and what mechanisms dominate loss at both low and elevated temperatures in such a device. Here we demonstrate quantum-coherent merged-element transmons made entirely from vdW Josephson junctions. These first-generation, fully crystalline qubits achieve microsecond lifetimes in an ultra-compact footprint without external shunt capacitors. Energy relaxation measurements, together with microwave characterization of vdW capacitors, point to dielectric loss as the dominant relaxation channel up to hundreds of millikelvin. These results establish vdW materials as a viable platform for compact superconducting quantum devices.
Recent improvements in materials growth and fabrication techniques may finally allow for superconducting semiconductors to realize their potential. Here, we build on a recent proposal to construct superconducting devices such as wires, Josephson junctions, and qubits inside and out-of single crystal silicon or germanium. Using atomistic fabrication techniques such as STM hydrogen lithography, heavily doped superconducting regions within a single crystal could be constructed. We describe the characteristic parameters of basic superconducting elements-a 1-D wire and a tunneling Josephson junction-and estimate the values for boron-doped silicon. The epitaxial, single-crystal nature of these devices, along with the extreme flexibility in device design down to the single-atom scale, may enable lower noise or new types of devices and physics. We consider applications for such supersilicon devices, showing that the state-of-the-art transmon qubit and the sought-after phase-slip qubit can both be realized. The latter qubit leverages the natural high kinetic inductance of these materials. Building on this, we explore how kinetic inductance-based particle detectors (e.g., photon or phonon) could be realized with potential application in astronomy or nanomechanics. We discuss supersemi devices (such as in silicon, germanium, or diamond) which would not require atomistic fabrication approaches and could be realized today.