Recent improvements in materials growth and fabrication techniques may finally allow for superconducting semiconductors to realize their potential. Here, we build on a recent proposal to construct superconducting devices such as wires, Josephson junctions, and qubits inside and out-of single crystal silicon or germanium. Using atomistic fabrication techniques such as STM hydrogen lithography, heavily doped superconducting regions within a single crystal could be constructed. We describe the characteristic parameters of basic superconducting elements-a 1-D wire and a tunneling Josephson junction-and estimate the values for boron-doped silicon. The epitaxial, single-crystal nature of these devices, along with the extreme flexibility in device design down to the single-atom scale, may enable lower noise or new types of devices and physics. We consider applications for such supersilicon devices, showing that the state-of-the-art transmon qubit and the sought-after phase-slip qubit can both be realized. The latter qubit leverages the natural high kinetic inductance of these materials. Building on this, we explore how kinetic inductance-based particle detectors (e.g., photon or phonon) could be realized with potential application in astronomy or nanomechanics. We discuss supersemi devices (such as in silicon, germanium, or diamond) which would not require atomistic fabrication approaches and could be realized today.
Recent improvements in materials growth and fabrication techniques may finally allow for superconducting semiconductors to realize their potential. Here, we build on a recent proposal to construct superconducting devices such as wires, Josephson junctions, and qubits inside and out-of single crystal silicon or germanium. Using atomistic fabrication techniques such as STM hydrogen lithography, heavily doped superconducting regions within a single crystal could be constructed. We describe the characteristic parameters of basic superconducting elements-a 1-D wire and a tunneling Josephson junction-and estimate the values for boron-doped silicon. The epitaxial, single-crystal nature of these devices, along with the extreme flexibility in device design down to the single-atom scale, may enable lower noise or new types of devices and physics. We consider applications for such supersilicon devices, showing that the state-of-the-art transmon qubit and the sought-after phase-slip qubit can both be realized. The latter qubit leverages the natural high kinetic inductance of these materials. Building on this, we explore how kinetic inductance-based particle detectors (e.g., photon or phonon) could be realized with potential application in astronomy or nanomechanics. We discuss supersemi devices (such as in silicon, germanium, or diamond) which would not require atomistic fabrication approaches and could be realized today.
This article reviews recent progress in superconducting nanodevices, with particular emphasis on fabrication methods developed for superconducting nanowires and nanoscale Josephson junctions based on different barrier materials. It evaluates the future potential of superconducting nanodevices, including nano-superconducting quantum interference devices (nanoSQUIDs), in light of improvements in nanoscale fabrication and manipulation techniques, along with their likely impacts on future quantum technology and measurement. The article first considers efforts to realize devices at the physical scale of 100 nm and below before discussing different types of Josephson junction such as trilayer junctions. It also describes the use of focused ion beam milling and electron beam lithography techniques for junction fabrication at the nanoscale and the improved energy sensitivity detectable with a nanoSQUID. Finally, it looks at a range of applications for nanoSQUIDs, superconducting single photon detectors, and other superconducting nanodevices.
The experimental demonstration of the coherent quantum phase slip (CQPS) in superconductors has opened a new direction of fundamental research and application of quantum cryogenic electronics. The flux qubit with CQPS center, new phase-locking mechanism, and suppression of the flux tunneling, the Charge Quantum Interference Device, dual Shapiro steps, and Bloch transistor were demonstrated. In part, progress is due to the emergence of new superconducting materials with high kinetic inductance, NbN, InOx, TiN, and AlOx; mature nanotechnology of the fabrication of nanowires and nanoscale Josephson junctions of nm sizes; and efficient protection of them from environmental noise. We review recent progress with CQPS and discuss further development of superconducting materials with high kinetic inductance and the emergence of devices with new functionalities.
Superconducting and photonic qubits are the two promising platforms for quantum computation. This review investigates different materials that are being used to advance these platforms, detailing the structural, electrical, and thermal properties that influence qubit performance. The discussion on superconducting qubits covers material properties critical for achieving low-loss circuits, the impact of two-level system defects, and the engineering of Josephson junctions. In contrast, photonic qubits, which leverage light for quantum information processing, are examined through the lens of material platforms such as silicon-based photonics and III–V semiconductors. The chapter also highlights fabrication challenges, qubit coherence improvements, and recent advances in single-photon sources for scalable quantum systems. By analyzing the intersection of materials science, quantum mechanics, and device engineering, this review provides insights into the optimization of quantum hardware for future large-scale quantum computing applications.
In the upcoming decades quantum technologies, especially quantum computation, will have a strong influence on industrial, technological, economic, and social progress and are, therefore, considered to be one of the key technologies. The fundamental building blocks for quantum computation are quantum bits (qubits). The superconducting platform offers one of the most promising implementations due to its monolithic character and potential for scalability. Present research around the world primarily focusses on scaling up the number of qubits, so reliable wafer-scale fabrication technologies are mandatory. In this paper, we present our recent developments on wafer-scale fabrication of superconducting quantum circuits including Josephson junctions by the Manhattan-type technology. We discuss fabrication parameters as well as electrical characterization. For arrays out of 50 Josephson junctions with structure dimensions of 200 nm × 200 nm, we achieve a critical current standard deviation of approx. 3% on-chip and 7% on-wafer. We also show first measurement results of so fabricated transmon-type qubits with relaxation and decoherence times ofT1= 12.5 µs andT2= 15.0 µs, respectively. With an increasing number of superconducting qubits and, thus, their input and read-out lines, new challenges arise: Crosstalk between qubits, unwanted modes in the qubit environment, and required interconnections. One way to counteract is the implementation of low inductance connections across coplanar waveguides. This can be realized by aluminum air bridges. In this paper we discuss the air bridges’ fabrication parameters and the impact on the integrated circuits’ elements, e.g., Josephson junctions. We show electrical and superconducting measurements with critical temperatures and critical currents ofTc> 1.0 K andIc> 0.6 mA, respectively.
Over the past two decades significant advances have been made in the research of superconducting quantum computing and quantum simulation, in particular of the device design and fabrication that leads to ever-increasing superconducting qubit coherence times and scales. With Google’s announcement of the realization of “quantum supremacy”, superconducting quantum computing has attracted even more attention. Superconducting qubits are macroscopic objects with quantum properties such as quantized energy levels and quantum-state superposition and entanglement. Their quantum states can be precisely manipulated by tuning the magnetic flux, charge, and phase difference of the Josephson junctions with nonlinear inductance through electromagnetic pulse signals, thereby implementing the quantum information processing. They have advantages in many aspects and are expected to become the central part of universal quantum computing. Superconducting qubits and auxiliary devices prepared with niobium or other hard metals like tantalum as bottom layers of large-area components have unique properties and potentials for further development. In this paper the research work in this area is briefly reviewed, starting from the design and working principle of a variety of superconducting qubits, to the detailed procedures of substrate selection and pretreatment, film growth, pattern transfer, etching, and Josephson junction fabrication, and finally the practical superconducting qubit and their auxiliary device fabrications with niobium base layers are also presented. We aim to provide a clear overview for the fabrication process of these superconducting devices as well as an outlook for further device improvement and optimization in order to help establish a perspective for future progress.
High-quality, single-crystal van der Waals (vdW) materials provide a promising platform for constructing Josephson junctions, but systematic studies have been limited by fabrication and measurement challenges. Here researchers characterize 24 vertical vdW superconductor-semiconductor junctions, including microwave spectroscopy of an all-vdW transmon qubit. Transport measurements reveal a crossover from proximity- to tunneling-type behavior with increasing semiconductor thickness. The results demonstrate how band alignment and materials engineering can be used to tailor qubit properties, establishing vdW heterostructures as an emerging platform for next-generation superconducting qubits.