Feedback oscillators, such as lasers and masers, serve as time references in modern computing, communication, and measurement. Quantum fluctuations ultimately limit their phase stability and ability to keep time precisely; in the absence of quantum engineering, their phase stability is bounded by a standard quantum limit (SQL). Techniques to improve the frequency stability of feedback oscillators beyond the SQL have been theorized, but have not yet been demonstrated. We demonstrate an opto-electronic oscillator (OEO), a type of feedback oscillator, with phase stability approaching the SQL. We then engineer the OEO's quantum state to improve its phase stability, thereby demonstrating the essential principle quantum-enhancement of feedback oscillators. Similar techniques may be employed to evade the SQL in other feedback oscillators such as masers and lasers.
Feedback oscillators, such as lasers and masers, serve as time references in modern computing, communication, and measurement. Quantum fluctuations ultimately limit their phase stability and ability to keep time precisely; in the absence of quantum engineering, their phase stability is bounded by a standard quantum limit (SQL). Techniques to improve the frequency stability of feedback oscillators beyond the SQL have been theorized, but have not yet been demonstrated. We demonstrate an opto-electronic oscillator (OEO), a type of feedback oscillator, with phase stability approaching the SQL. We then engineer the OEO's quantum state to improve its phase stability, thereby demonstrating the essential principle quantum-enhancement of feedback oscillators. Similar techniques may be employed to evade the SQL in other feedback oscillators such as masers and lasers.
Feedback oscillators, consisting of an amplifier whose output is partially fed back to its input, provide stable references for standardization and synchronization. Notably, the laser is such an oscillator whose performance can be limited by quantum fluctuations. The resulting frequency instability, quantified by the Schawlow-Townes formula, sets a limit to laser linewidth. Here, we show that the Schawlow-Townes formula applies universally to feedback oscillators beyond lasers. This is because it arises from quantum noise added by the amplifier and out-coupler in the feedback loop. Tracing the precise origin of quantum noise in an oscillator informs techniques to systematically evade it: we show how squeezing and entanglement can enable sub-Schawlow-Townes linewidth feedback oscillators. Our analysis clarifies the quantum limits to the stability of feedback oscillators in general, derives a standard quantum limit (SQL) for all such devices, and quantifies the efficacy of quantum strategies in realizing sub-SQL oscillators.
High-bandwidth, high-stability clocks offer unique chances to study fundamental physics beyond simple metrology. Today, the most stable clocks are optical lattice clocks and they can reach a fractional stability of 3.1 × 10^−18 at 1 s averaging time. Their applications are ranging from the redefinition of the SI time unit, the Second, to the possible detection of gravitational waves in space. The stability of optical lattice clocks is primarily limited by quantum projection noise and Dick noise. In this thesis, I present our effort in creating a platform for studying quantum enhanced metrology and its application towards optical lattice clocks. We demonstrated the laser cooling in an optical cavity with Raman-sideband cooling and achieved average vibration number of n = 0.2. We utilized cavity feedback squeezing to demonstrate unitary spin squeezing on magnetic sub-levels of 171Yb, achieving 6.5 dB quantum projection noise reduction over the standard quantum limit (SQL). With coherent optical state transfer by ultra stable laser pulses, we successfully transferred the spin squeezed state from magnetic sub-levels to the optical transition, and demonstrated quantum enhanced metrology in the optical lattice clock for the first time. We achieved 4.4 dB of metrological gain over the SQL, which corresponds to a reduction of the averaging time by a factor of 2.8 in clock operation. Furthermore, we studied quantum enhanced metrology with time-reversal-based protocols. We performed a signal amplification through time-reversed interaction protocol between the ground state magnetic sublevels of 171Yb, achieving the largest sensitivity improvement beyond SQL in any interferometers to date at 11.8dB. Besides that, we experimentally studied the connection between quantum information scrambling, by measuring out-of-time-order correlators (OTOCs), and quantum metrology, by measuring metrological gain. We found these values to agree with each other, and concluded that the time-reversal quantum metrology can saturate the attainable gain from the quantum information scrambling.
Laser cooling is a fundamental technique used in primary atomic frequency standards, quantum computers, quantum condensed matter physics and tests of fundamental physics, among other areas. It has been known since the early 1990s that laser cooling can, in principle, be improved by using squeezed light as an electromagnetic reservoir; while quantum feedback control using a squeezed light probe is also predicted to allow improved cooling. Here we show the implementation of quantum feedback control of a micro-mechanical oscillator using squeezed probe light. This allows quantum-enhanced feedback cooling with a measurement rate greater than it is possible with classical light, and a consequent reduction in the final oscillator temperature. Our results have significance for future applications in areas ranging from quantum information networks, to quantum-enhanced force and displacement measurements and fundamental tests of macroscopic quantum mechanics.
Opto-electronic oscillator (OEO) is a closed-loop system with part of the loop is implemented by an optical beam, and the rest by RF circuitry. The technological advantage of this approach over traditional all-RF loops in the gigahertz range comes from the that frequency filtering can be done far more efficiently in the optical range with compact, low power, and have superior stability. In this work, we report our preliminary results on using the phenomenon of coherent population trapping in (87) Rb vapor as an optical filter. Such a filter allows us to stabilize the OEO at the hyperfine splitting frequency of rubidium, thus implementing a novel type of frequency standard.
Abstract Precise timekeeping is a foundational, often overlooked dependency of both positioning/navigation/timing (PNT) systems and secure communications: satellite navigation requires nanosecond-level clock synchronization to compute position from signal time-of-flight, and time-synchronized cryptographic protocols (including key-exchange window validation and frequency-hopping schemes) depend on clock stability at the transmitting and receiving ends. Current-generation atomic clocks (cesium and rubidium standards) achieve their stability by averaging over many independent, unentangled atoms, a strategy fundamentally limited by the standard quantum limit (SQL), in which timing precision scales with the number of atoms N as N. Quantum-enhanced atomic clocks propose replacing independent-atom ensembles with entangled (GHZ-state) ensembles, whose Heisenberg-limited precision scales instead as N². This study validates the two components of that claim independently: (1) the entanglement-derived precision advantage, via GHZ Ramsey spectroscopy simulated on the PKTron quantum computing framework across probe sizes N = 1, 2, 4, and 6, and cross-checked on IBM Quantum's ibm_fez hardware at N = 4; and (2) accurate recovery of an atomic transition's phase signal, via PKTron's built-in Quantum Phase Estimation (QPE) algorithm, tested against three independent reference phases. Simulation reproduced exact Heisenberg scaling (measured Fisher information of 1.00, 4.00, 16.00, and 36.00 against theoretical N² values of 1, 4, 16, and 36) and exact QPE phase recovery (zero measured error across all three test phases). On real IBM Quantum hardware at N = 4, the zero-drift calibration point returned P(all-zero) = 0.972, and the maximum-sensitivity bias point returned P(all-zero) = 0.500, exactly matching the theoretical prediction. These results constitute a reproducible, multi-method, hardware-validated confirmation of the sensing and phase-extraction primitives that underlie quantum-enhanced atomic clock proposals. This work does not simulate or validate a physical atomic clock, an optical lattice clock, or any oscillator hardware; it validates the underlying discrete-variable sensing and estimation mechanisms only, and should be read accordingly.
Ultra stable frequency references such as the ones used in optical atomic clocks and for quantum metrology may be obtained by stabilizing a laser to an optical cavity that is stable over time. State-of-the-art frequency references are constructed in this way, but their stabilities are currently limited by thermally induced length fluctuations in the reference cavity. Several alternative approaches using the potential for frequency discriminating of highly forbidden narrow atomic transitions have been proposed in, e.g., [1] and [2]. In this proceeding we will present some of the ongoing experimental efforts derived from these proposals, to use cavity-enhanced interaction with atomic 88 Sr samples as a frequency reference for laser stabilization. Such systems can be realized using both passive and active approaches where either the atomic phase response is used as an error signal, or the narrow atomic transition itself is used as a source for a spectrally pure laser. Both approaches shows the promise of being able to compete with the current state of the art in stable lasers and have similar limitations on their ultimately achievable linewidths [1, 2].