Randomized compiling converts a coherent gate error into a stochastic one by dressing each gate with a randomly chosen Pauli operator, and the standard view is that the coherent information is lost once outcomes are averaged over these random choices. This is incorrect: an exact Fisher-information identity shows that the averaged data and the correlation between the outcome and the random choice, the twirl label, together conserve the full information, and only the label is normally discarded. Retaining it turns an unmodified randomized-compiling run into an unbiased estimator for the coherent error, at no added circuit cost, valid under realistic decoherence and at any circuit depth. The same construction extends to coupling between qubits through two further mechanisms: a neighboring qubit prepared in a known, randomized state probes static coupling, and randomizing the pulse count used to prepare that state isolates a second, physically distinct leakage effect found unexpectedly on real hardware during this work. All three results are derived exactly, checked against closed-form oracles, and tested on a 127-qubit IBM processor. The single-qubit case is confirmed cleanly: an injected phase is recovered to 0.006~rad while the same data without labels shows no signal. The two-qubit extensions are validated at the level of the recovery circuit, with clean positive controls on hardware, though the coupling strengths themselves remain below the resolution of the shot budgets used here.
Randomized compiling converts a coherent gate error into a stochastic one by dressing each gate with a randomly chosen Pauli operator, and the standard view is that the coherent information is lost once outcomes are averaged over these random choices. This is incorrect: an exact Fisher-information identity shows that the averaged data and the correlation between the outcome and the random choice, the twirl label, together conserve the full information, and only the label is normally discarded. Retaining it turns an unmodified randomized-compiling run into an unbiased estimator for the coherent error, at no added circuit cost, valid under realistic decoherence and at any circuit depth. The same construction extends to coupling between qubits through two further mechanisms: a neighboring qubit prepared in a known, randomized state probes static coupling, and randomizing the pulse count used to prepare that state isolates a second, physically distinct leakage effect found unexpectedly on real hardware during this work. All three results are derived exactly, checked against closed-form oracles, and tested on a 127-qubit IBM processor. The single-qubit case is confirmed cleanly: an injected phase is recovered to 0.006~rad while the same data without labels shows no signal. The two-qubit extensions are validated at the level of the recovery circuit, with clean positive controls on hardware, though the coupling strengths themselves remain below the resolution of the shot budgets used here.
Randomized compiling reduces the effects of errors on quantum computers by tailoring arbitrary Markovian errors into stochastic Pauli noise. Here we prove that randomized compiling also tailors non-Markovian errors into local stochastic Pauli noise and investigate the technique's limitations. We show through analysis and numerical results that randomized compiling alters errors in three distinct helpful ways. First, it prevents the coherent accumulation of errors (including hard to remove crosstalk effects) across gate cycles by destroying intercycle coherent correlations. Second, it converts individual gate cycle errors into Pauli noise. Finally, randomized compiling reduces the variability inherent to noisy devices. We confirm these theoretical predictions with the IBM Quantum Experience platform and describe experimental data that illustrates a drastic performance improvement across public devices. These results cement the importance of randomized compiling in near- and long-term quantum information processing.
Abstract Randomized compiling (RC) converts coherent errors into stochastic Pauli noise, but this conversion alone does not imply isotropic contraction of the output state. Here we use the generalized Bloch vector (GBV) representation to examine the cumulative effect of RC on state purity and orientation in multi-layer circuits. For the independent, isotropically distributed weak coherent errors considered here, the accumulated ensemble-averaged RC channel lies close to the depolarizing direction, producing a state-level near-isotropic contraction that sacrifices a small amount of purity to achieve a substantial suppression of orientational deviation. When dephasing coexists, RC suppresses the coherent-error contribution but leaves a residual deviation dominated by dephasing, setting a limit that we term the ``dephasing wall.'' We experimentally validate these findings on a superconducting quantum processor through GHZ state preparation and phase estimation in a simulation of topological braiding. The results confirm that RC's effectiveness stems from its ability to suppress the orientational bias of coherent errors—a structural transformation not resolved by fidelity alone but directly visible through GBV diagnostics.
Experimental supplement to arXiv:2611.08310, a companion manuscript on gate-optimal recovery designs (2026). This supplement specifies a concrete experiment for measuring the eleven-parameter small-angle coherent noise of a three-qubit register with three single-qubit Pauli gates, using a distance-three repetition code in both orientations. It gives the branch structure, the syndrome-to-Pauli look-up table for the three-gate design, the fixed sixteen-setting measurement table, shot and wall-clock budgets for three platform classes, a calibration and systematics checklist, an analysis pipeline, and a symptom-to-cause table. Two sections price the alternatives: a fixed recovery that does not resolve the syndrome saves a factor three in circuits and loses a factor five in precision floor, and a coherent unitary recovery keeps the circuit saving but replaces each single-qubit Pauli by a multi-controlled gate that every branch must compile. At three qubits no design in the scanned budget loses rank, so identifiability does not separate the gate counts; what depends on the working point is which three gates to use, not how many. The organising point is that the recovery gate count is a resource: three gates attain the lowest precision floor, the standard six-gate decoder is 22 times worse at a small-angle operating point and 2.3 times worse at the well-conditioned point of arXiv:2610.19779, and the ordering is stable over forty sampled working points while the size of the factor is not. The ordering survives when the look-up is compiled rather than measured, and the margin then widens from 5.6 to 7.7 in wall clock, because a compiled table charges every entry in every branch. A section added in version 1.5 asks whether that answer depends on the platform. A second device archetype -- a tunable coupler or iSWAP-style gate, whose always-on term is the exchange J(XX+YY)/2 -- carries one more parameter per bond, thirteen in all, and the two clusters are not nested: XX and YY commute, and ZZ is orthogonal to their plane. Enumerating all 64 design pairs at n=3 and all 3969 at n=5 gives the same gate budget for both archetypes, zero gates to reach full rank at n=3 and one at n=5; that count is a lower bound on the budget, not a recommended design, since the precision optimum is the three gates of the main text, where zero gates is 18 times worse at the median and 379 times worse at the certified point. At matched per-layer coherent infidelity the thirteen-parameter cluster is not worse (101.0 against 88.9 mrad on the local angles at 10^5 shots), and at the three-gate optimum the comparison widens (41.7 against 32.2 mrad). Choosing the wrong cluster is a bias, not a variance: the correct family leaves a residual of exactly zero, the wrong one leaves 0.4-0.6% in the fingerprint and moves the nine local angles by a quarter to a half, while its Cramer-Rao bound looks better. The decoded logical error cannot arbitrate at that bias level -- 200 random perturbations of the same total variation spread it over a factor 43 -- so the model family must be chosen by the residual. The same section closes with a composition law: a per-gate composition of Pauli probabilities is elementwise in the Walsh eigenvalues and therefore under-counts the coherent part of the depth-L noise by exactly L (measured slopes 1.98 for the generator against 0.99 for the per-gate rule). A closing section fixes the size of the gain and asks how far it extends. An exact prior removes 19.3% of the logical error at d=3, which is 4.3e-5 errors per code cycle; a three-gate fit captures 83, 96.5 and 99.5% of that share on the three platform classes. That share, not the accuracy of the estimate, is where every prior-based protocol stops, because 94% of the residual is weight-two aliasing. It is not a limit set by using Pauli probabilities: the same prior decodes both the coherent channel and its twirled version, so the drop from 19.3% to 11.6% under twirling prices the device rather than the estimate, and composing per-gate twirls changes at most two of the 256 decoder decisions. A generator rather than a channel is what additionally allows the coherent part to be inverted and the prior to be extrapolated to unmeasured working points. Carrying the same three-qubit fit to d=5 or d=7 obeys a closed form, G_d = G_3^((d+1)/4), so no extra precision is needed at larger distance: a 6.4 mrad rms on the eleven parameters moves the d=7 gain by 8.5%. What does not transport is the truncated part of the model---the 2(d-1)^2 three-body positions a d x d patch adds, none of which a chain fit covers---which costs 5% of the gain at d=5 and 10% at d=7; site-to-site spread costs another 3%. The law itself is a property of the decoder and applies to any prior, so this is a bound on what a three-qubit run can claim, not an advantage over Pauli-statistics protocols. Measuring at the target size instead of transporting avoids the truncation count but pays conditioning: a factor 68 from three to seven qubits. All numbers are model-level: no device data are reported, and the floors assume a calibration residual of 1e-3. Contents (v1.5): 1 What the experiment measures · 2 The three branches · 3 Syndrome decoding · 4 Settings and shot arithmetic · 5 Budget on three platforms · 6 Why the syndromes must be resolved · 7 What does and does not depend on the gate count · 8 Does the platform change the answer? · 9 How large the gain is, and how far it extends · 10 Calibration and systematics · 11 Analysis pipeline · 12 Diagnostics · 13 Checklist.
Coherent noise calls for a reusable physical model, but Pauli twirling erases it and full process tomography scales exponentially. We turn measurement-free quantum error correction into a probe: bit-flip and phase-flip codes polarize few-qubit coherent noise into single-logical-qubit channels, and the resulting fingerprint identifies an 11-parameter three-qubit family. An exact rational-arithmetic rank certificate, evaluated at a rational point in the interior of the parameter domain, proves local injectivity on a dense open subset of that domain. The map is nevertheless not globally injective: a compensating rotation combined with a site exchange yields exact collisions, which we classify and then remove by adding one two-qubit marginal channel. The site exchange is the only nontrivial permutation symmetry of the n-qubit chain generator at any n, so the classification is structural rather than a three-qubit accident. A Cramér--Rao analysis, checked at the level of individual measurement settings, reaches 0.01~rad per parameter at a representative point, and decoder priors rebuilt from such an estimate retain most of their correlation gain. Propagating the generator into a distance-three surface code gives a 14.8-fold encoding gain when the generator is known exactly, and 1.21-fold of the correlation gain survives when the prior is rebuilt from an estimate at the stated precision, closing the loop from characterization to decoding.
Quantum noise is a central challenge in quantum computing across many applications. Extensive work has examined how qubits couple to their environment, leading to decoherence and irreversible relaxation. This work studies a continuous coherent noise model for quantum circuits and compares it with a discrete Pauli model. The focus is on small, coherent gate errors that accumulate across circuit depth. These errors are modeled as random rotations on the Bloch sphere using a von Mises-Fisher distribution. In the small-angle limit, the model reduces to an isotropic Gaussian distribution. We test the model on quantum error-correction circuits based on the [[5,1,3]] and [[7,1,3]] codes. A variant of Grover's search circuit with different qubit counts is also examined. To enable fair comparison, we introduce a model-independent matching scheme. Pauli and continuous noise channels are aligned using the binary entropy at readout. This isolates the effect of noise structure at fixed uncertainty. An approximate analytical method for the propagation of coherent errors is also developed. The method tracks error distributions both on Clifford and non-Clifford circuits without full Monte Carlo sampling. It reduces simulation cost while preserving accuracy for circuit-level error estimates. The approximation is validated against brute-force simulations, identifying its regime of validity with Clifford and non-Clifford circuits under error correction. Our results show that continuous coherent noise and Pauli noise lead to comparable logical-error trends in the stabilizer-code circuits studied here. This behavior is consistent with syndrome extraction projecting a general single-qubit error onto Pauli-error subspaces before recovery. They also show where simplified propagation models work well and where their accuracy is reduced.
The successful implementation of algorithms on quantum processors relies on the accurate control of quantum bits (qubits) to perform logic gate operations. In this era of noisy intermediate-scale quantum (NISQ) computing, systematic miscalibrations, drift, and crosstalk in the control of qubits can lead to a coherent form of error that has no classical analog. Coherent errors severely limit the performance of quantum algorithms in an unpredictable manner, and mitigating their impact is necessary for realizing reliable quantum computations. Moreover, the average error rates measured by randomized benchmarking and related protocols are not sensitive to the full impact of coherent errors and therefore do not reliably predict the global performance of quantum algorithms, leaving us unprepared to validate the accuracy of future large-scale quantum computations. Randomized compiling is a protocol designed to overcome these performance limitations by converting coherent errors into stochastic noise, dramatically reducing unpredictable errors in quantum algorithms and enabling accurate predictions of algorithmic performance from error rates measured via cycle benchmarking. In this work, we demonstrate significant performance gains under randomized compiling for the four-qubit quantum Fourier transform algorithm and for random circuits of variable depth on a superconducting quantum processor. Additionally, we accurately predict algorithm performance using experimentally measured error rates. Our results demonstrate that randomized compiling can be utilized to leverage and predict the capabilities of modern-day noisy quantum processors, paving the way forward for scalable quantum computing.