Quantum relaxometry based on nitrogen-vacancy (NV) centers in diamond is an easy-to-use technique that detects magnetic noise by measuring the longitudinal relaxation of NV centers. It is favored in chemical and biological applications due to the robustness against imperfect spin control. By tuning the energy level, NV relaxometry can detect magnetic noise generated by other spins and obtain magnetic resonance spectra through cross relaxation. However, the inhomogeneous broadening of NV centers greatly limits the spectral resolution of cross-relaxation spectra. Here we demonstrate a hole-burning technique to remove the inhomogeneous broadening. We utilize a weak pump field to deplete specific NV centers during the relaxation measurement, which contribute a reverse signal in the cross-relaxation spectra with a much narrower linewidth. Our method retains the convenience and sensitivity of NV relaxometry, opening up new avenues for high-resolution magnetic resonance spectroscopy in complex scenarios.
Quantum relaxometry based on nitrogen-vacancy (NV) centers in diamond is an easy-to-use technique that detects magnetic noise by measuring the longitudinal relaxation of NV centers. It is favored in chemical and biological applications due to the robustness against imperfect spin control. By tuning the energy level, NV relaxometry can detect magnetic noise generated by other spins and obtain magnetic resonance spectra through cross relaxation. However, the inhomogeneous broadening of NV centers greatly limits the spectral resolution of cross-relaxation spectra. Here we demonstrate a hole-burning technique to remove the inhomogeneous broadening. We utilize a weak pump field to deplete specific NV centers during the relaxation measurement, which contribute a reverse signal in the cross-relaxation spectra with a much narrower linewidth. Our method retains the convenience and sensitivity of NV relaxometry, opening up new avenues for high-resolution magnetic resonance spectroscopy in complex scenarios.
Negatively charged nitrogen-vacancy (NV${}^{\ensuremath{-}}$) centers in diamond have generated much recent interest for their use in sensing. The sensitivity improves when the NV ground-state microwave transitions are narrow, but these transitions suffer from inhomogeneous broadening, especially in high-density NV ensembles. To better understand and remove the sources of broadening, we demonstrate room-temperature spectral ``hole burning'' of the NV ground-state transitions. We find that hole burning removes the broadening caused by magnetic fields from 13C nuclei and demonstrate that it can be used for magnetic-field-insensitive thermometry.
Spin relaxometry using solid-state spin defects, such as the diamond nitrogen-vacancy (NV) center, probes dynamical processes by measuring how environmental fluctuations enhance the spin relaxation rate. In the weak-coupling limit, relaxation rates sample the transverse magnetic-noise power spectral density through a sensor-specific filter function, turning the defect into a local, frequency-selective noise spectrometer. This review bridges theory and experiment, clarifying how measured relaxation rates map onto noise spectra and how near-field geometry shapes the response. We highlight representative applications across condensed-matter physics, chemical and biological sensing, and relaxometry-based magnetic-resonance spectroscopy. We conclude with emerging opportunities and key challenges.
The nitrogen-vacancy (NV) center can serve as a magnetic sensor for electron paramagnetic resonance (EPR) measurements. Benefiting from its atomic size, the diamond chip can integrate a tremendous amount of NV centers to improve the magnetic-field sensitivity. However, EPR spectroscopy using NV ensembles is less efficient due to inhomogeneities in both sensors and targets. Spectral line broadening induced by ensemble averaging is even detrimental to spectroscopy. Here we show a kind of cross-relaxation EPR spectroscopy at zero field, where the sensor is tuned by an amplitude-modulated control field to match the target. The modulation makes detection robust to the sensor's inhomogeneity, while zero-field EPR is naturally robust to the target's inhomogeneity. We demonstrate an efficient EPR measurement on an ensemble of roughly 30000 NV centers. Our method shows the ability to not only acquire unambiguous EPR spectra of free radicals, but also monitor their spectroscopic dynamics in real time.
Quantum relaxometry is one of the most successful applications of nitrogen-vacancy (NV) centers in diamond and, more broadly, solid-state spin qubits, enabling ultrasensitive detection of magnetic noise and paramagnetic species via measurements of the spin-lattice relaxation time T1. Conventional pulsed protocols, however, probe T1 efficiently only over a limited temporal range, which restricts the scope and throughput of the technique. Here we introduce a continuous-wave quantum relaxometry protocol that operates in the frequency domain. By measuring the frequency response of the optically detected magnetic resonance signal under low-frequency microwave amplitude modulation, we extract T1 from the characteristic response time of the spin system. The method enables efficient T1 measurements spanning more than three orders of magnitude -- directly demonstrated from 60 μs to 200 ms in our experiments -- across a broad temperature range and under substantial ensemble inhomogeneity. We further show that this protocol enables quantitative relaxometry-based sensing in nanodiamonds, achieving a substantial speed-up over the pulsed methods and offering a practical approach to optimizing nanodiamond size for enhanced sensitivity.
The longitudinal relaxation time (termed as T 1 ) of nitrogen-vacancy (NV) centers in nanodiamonds can be affected by surface electric or magnetic noise, which has been exploited to develop cutting-edge quantum relaxometry for biochemical sensing. In this work, a tiny all-fiber quantum probe based on longitudinal relaxometry was developed by chemically-anchoring nanodiamonds on the surface of a cone fiber tip. The dependences of T 1 on surface electric and magnetic noise were discussed in theories first and then experimentally demonstrated in varied pH and Gd 3+ concentration solutions, respectively. Because of NV centers being subject to enhanced coupling from surface noise, T 1 reduced from 290 to 245 µs when pH changed from 3 to 9 and reduced to 220 µs when Gd 3+ concentration increased to 10 mM, agreeing well with theoretical results. Based on these, the Gd 3+ -tagged-biotin and streptavidin model was designed and implemented on the all-fiber probe, and results demonstrated the detection of biotin with a limit of 168 nM and good specificity. This paper opens a new way to develop an all-fiber quantum probe by exploiting the unique electrical spin properties of NV centers, and the probe shows great potential for biological detection with high sensitivity and specificity.
The investigation of biomolecular interactions at the single-molecule level has emerged as a pivotal research area in life science, particularly through optical, mechanical, and electrochemical approaches. Spins existing widely in biological systems, offer a unique degree of freedom for detecting such interactions. However, most previous studies have been largely confined to ensemble-level detection in the spin degree. Here, we developed a molecular interaction analysis method approaching single-molecule level based on relaxometry using the quantum sensor, nitrogen-vacancy (NV) center in diamond. Experiments utilized an optimized diamond surface functionalized with a polyethylenimine nanogel layer, achieving $\sim$10 nm average protein distance and mitigating interfacial steric hindrance. Then we measured the strong interaction between streptavidin and spin-labeled biotin complexes, as well as the weak interaction between bovine serum albumin and biotin complexes, at both the micrometer scale and nanoscale. For the micrometer-scale measurements using ensemble NV centers, we re-examined the often-neglected fast relaxation component and proposed a relaxation rate evaluation method, substantially enhancing the measurement sensitivity. Furthermore, we achieved nanoscale detection approaching single-molecule level using single NV centers. This methodology holds promise for applications in molecular screening, identification and kinetic studies at the single-molecule level, offering critical insights into molecular function and activity mechanisms.