Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2606.22732

Protecting Qubits from Purcell Decay via Permanent Dipoles

Alex Krasnok

quant-phphysics.app-phphysics.opticsSubmitted Jun 22, 2026• Announced Jun 23, 2026• 0 citations
arXivHTMLPDF

Abstract

Reading out a qubit often requires coupling it to a resonator, but that same resonator can also give the qubit an extra path to decay. Here, we study a way to reduce this loss using a built-in permanent electric dipole. The dipole shifts the cavity field in different directions for the qubit ground and excited states. This shift makes the relevant wave functions overlap less, which weakens the transverse qubit--cavity exchange that causes Purcell decay. In a simplified displaced rotating-wave model, this exchange vanishes at $η=\sqrt{2}$. In the full transverse model, this exact zero is lifted, but strong suppression remains at a larger dipole-induced displacement. Using dressed open-system decay rates, we find an operating point where the cavity-mediated decay is strongly reduced while the longitudinal readout signal remains finite. For the benchmark studied here, at fixed pointer separation, the normalized lifetime increases from $κT_1=11.1$ to $47.3$, and the estimated single-shot readout error drops from $0.21$ to $0.07$. These results show that permanent electric dipoles can provide an internal, channel-selective form of Purcell protection.

Related papers

The waves-in-space Purcell effect for superconducting qubits

Param Patel, Mingkang Xia, Chao Zhou +5 more

Quantum information processing, especially with quantum error correction, requires both long-lived qubits and fast, quantum non-demolition readout. In superconducting circuits this leads to the requirement to both strongly couple qubits, such as transmons, to readout modes while also protecting them from associated Purcell decay through the readout port. So-called Purcell filters can provide this protection, at the cost of significant increases in circuit components and complexity. However, as we demonstrate in this work, visualizing the qubit fields in space reveals locations where the qubit fields are strong and cavity fields weak; simply placing ports at these locations provides intrinsic Purcell protection. For a $λ/2$ readout mode in the `chip-in-tube' geometry, we show both millisecond level Purcell protection and, conversely, greatly enhanced Purcell decay (qubit lifetime of 1~$μ$s) simply by relocating the readout port. This method of integrating the Purcell protection into the qubit-cavity geometry can be generalized to other 3D implementations, such as post-cavities, as well as planar geometries. For qubit frequencies below the readout mode this effect is quite distinct from the multi-mode Purcell effect, which we demonstrate in a 3D-post geometry where we show both Purcell protection of the qubit while spoiling the quality factor of higher cavity harmonics to protect against dephasing due to stray photons in these modes.

arXiv:2503.11644•Mar 14, 2025•4 citations

Broadband Purcell Filter for Fast Superconducting Qubit Reset and Readout

Yu Zhao, Zhixu Chen, Hanxian Liu +12 more

Rapid reset and readout of qubit states are essential for quantum error correction, yet accelerating these operations through stronger coupling to a dissipative environment inevitably increases qubit decay via the Purcell effect. Here we present a broadband Purcell filter that decouples the reset and readout paths, enabling both operations to be independently optimized without compromising qubit coherence. The filter employs two engineered notches - an intrinsic notch and a bandstop notch - to provide broadband Purcell protection, together with an additional reset stub that creates a reset mode below the protected band. To enable fast reset while suppressing filter-mediated interactions between qubits, we couple each qubit to a dedicated reset resonator. We experimentally demonstrate Purcell-limited relaxation times exceeding 1 ms across a 1.2 GHz bandwidth, simultaneously with 500 ns readout without a Josephson parametric amplifier and 100 ns reset with 99.6% efficiency. The reset resonator is designed with a deliberate kappa-chi mismatch, which suppresses photon-shot-noise-induced dephasing by a factor of 70 compared to the readout resonator. Our work provides a scalable hardware solution that resolves the traditional trade-off between fast qubit operations and qubit protection, advancing the prospects for fault-tolerant quantum computing.

quant-pharXiv:2609.14081•Sep 15, 2026•1 citation

Interferometric Purcell suppression of spontaneous emission in a superconducting qubit

Alec Yen, Yufeng Ye, Kaidong Peng +8 more

In superconducting qubits, suppression of spontaneous emission is essential to achieve fast dispersive measurement and reset without sacrificing qubit lifetime. We show that resonator-mediated decay of the qubit mode to the feedline can be suppressed using destructive interference, where the readout resonator is coupled to the feedline at two points. This ``interferometric Purcell filter'' does not require dedicated filter components or impedance mismatch in the feedline, making it suitable for applications such as all-pass readout. We design and fabricate a device with the proposed scheme and demonstrate suppression of resonator-mediated decay that exceeds 2 orders of magnitude over a bandwidth of $400\phantom{\rule{0.1em}{0ex}}\mathrm{M}\mathrm{Hz}$ for a resonator linewidth of 13.8 MHz.

arXiv:2405.10107•Physical Review Applied•Feb 27, 2025•13 citations

Mechanical Purcell filters for microwave quantum machines

Agnetta Y. Cleland, Marek Pechal, Pieter-Jan Stas +3 more

In circuit quantum electrodynamics, measuring the state of a superconducting qubit introduces a loss channel, which can enhance spontaneous emission through the Purcell effect, thus decreasing the qubit lifetime. This decay can be mitigated by performing the measurement through a Purcell filter, which strongly suppresses signal propagation at the qubit transition frequency. If the filter is also well-matched at the readout cavity frequency, it will protect the qubit from decoherence channels without sacrificing measurement bandwidth. We propose and analyze design for a mechanical Purcell filter, which we also fabricate and characterize at room temperature. The filter is composed of an array of nanomechanical resonators in thin-film lithium niobate, connected in a ladder topology, with series and parallel resonances arranged to produce a bandpass response. Their modest footprint, steep band edges, and lack of cross talk make these filters an appealing alternative to analogous electromagnetic versions currently used in microwave quantum machines.

arXiv:1905.08403•Applied Physics Letters•Dec 23, 2019•17 citations

Enhanced qubit readout using locally generated squeezing and inbuilt Purcell-decay suppression

Luke C. G. Govia, Aashish A Clerk

We introduce and analyze a dispersive qubit readout scheme where two-mode squeezing is generated directly in the measurement cavities. The resulting suppression of noise enables fast, high-fidelity readout of naturally weakly coupled qubits, and the possibility to protect strongly coupled qubits from decoherence by weakening their coupling. Unlike other approaches exploiting squeezing, our setup avoids the difficult task of transporting and injecting with high fidelity an externally generated squeezed state. Our setup is also surprisingly robust against unwanted non-QND backaction effects, as interference naturally suppresses Purcell decay: the system acts as its own Purcell filter. Our setup is compatible with the experimental state-of-the-art in circuit QED systems, but the basic idea could also be realized in other systems.

arXiv:1611.07919•New Journal of Physics•Feb 9, 2017•23 citations

Optimal dispersive readout of a spin qubit with a microwave resonator

Benjamin D’Anjou, Guido Burkard

Strong coupling of semiconductor spin qubits to superconducting microwave resonators was recently demonstrated [X. Mi et al., Nature 555, 599 (2018); A. J. Landig et al., Nature 560, 179 (2018); N. Samkharadze et al., Science 359, 1123 (2018); T. Cubaynes et al., NPJ Quant. Inf. 5, 47 (2019)]. These breakthroughs pave the way for quantum information processing that combines the long coherence times of solid-state spin qubits with the long-distance connectivity, fast control, and fast high-fidelity quantum-non-demolition readout of existing superconducting qubit implementations. Here we theoretically analyze and optimize the dispersive readout of a single spin in a semiconductor double quantum dot (DQD) coupled to a microwave resonator via its electric dipole moment. The strong spin-photon coupling arises from the motion of the electron spin in a local magnetic field gradient. We calculate the signal-to-noise ratio (SNR) of the readout accounting for both Purcell spin relaxation and spin relaxation arising from intrinsic electric noise within the semiconductor. We express the maximum achievable SNR in terms of the cooperativity associated with these two dissipation processes. We find that while the cooperativity increases with the strength of the dipole coupling between the DQD and the resonator, it does not depend on the strength of the magnetic field gradient. We then optimize the SNR as a function of experimentally tunable DQD parameters. We identify wide regions of parameter space where the unwanted backaction of the resonator photons on the qubit is small. Moreover, we find that the coupling of the resonator to other DQD transitions can enhance the SNR by at least a factor of two, a ``straddling'' effect [J. Koch et al., Phys. Rev. A 76, 042319 (2007)] that occurs only at nonzero energy detuning of the DQD double-well potential. We estimate that with current technology, single-shot readout fidelities in the range 82--95% can be achieved within a few $\ensuremath{\mu}\mathrm{s}$ of readout time without requiring the use of Purcell filters.

arXiv:1905.09702•Physical review. B./Physical review. B•Dec 23, 2019•48 citations
Reading out a qubit often requires coupling it to a resonator, but that same resonator can also give the qubit an extra path to decay. Here, we study a way to reduce this loss using a built-in permanent electric dipole. The dipole shifts the cavity field in different directions for the qubit ground and excited states. This shift makes the relevant wave functions overlap less, which weakens the transverse qubit--cavity exchange that causes Purcell decay. In a simplified displaced rotating-wave model, this exchange vanishes at η=2η=\sqrt{2}η=2​. In the full transverse model, this exact zero is lifted, but strong suppression remains at a larger dipole-induced displacement. Using dressed open-system decay rates, we find an operating point where the cavity-mediated decay is strongly reduced while the longitudinal readout signal remains finite. For the benchmark studied here, at fixed pointer separation, the normalized lifetime increases from κT1=11.1κT_1=11.1κT1​=11.1 to 47.347.347.3, and the estimated single-shot readout error drops from 0.210.210.21 to 0.070.070.07. These results show that permanent electric dipoles can provide an internal, channel-selective form of Purcell protection.
Quantum information processing, especially with quantum error correction, requires both long-lived qubits and fast, quantum non-demolition readout. In superconducting circuits this leads to the requirement to both strongly couple qubits, such as transmons, to readout modes while also protecting them from associated Purcell decay through the readout port. So-called Purcell filters can provide this protection, at the cost of significant increases in circuit components and complexity. However, as we demonstrate in this work, visualizing the qubit fields in space reveals locations where the qubit fields are strong and cavity fields weak; simply placing ports at these locations provides intrinsic Purcell protection. For a λ/2λ/2λ/2 readout mode in the `chip-in-tube' geometry, we show both millisecond level Purcell protection and, conversely, greatly enhanced Purcell decay (qubit lifetime of 1~μμμs) simply by relocating the readout port. This method of integrating the Purcell protection into the qubit-cavity geometry can be generalized to other 3D implementations, such as post-cavities, as well as planar geometries. For qubit frequencies below the readout mode this effect is quite distinct from the multi-mode Purcell effect, which we demonstrate in a 3D-post geometry where we show both Purcell protection of the qubit while spoiling the quality factor of higher cavity harmonics to protect against dephasing due to stray photons in these modes.
Rapid reset and readout of qubit states are essential for quantum error correction, yet accelerating these operations through stronger coupling to a dissipative environment inevitably increases qubit decay via the Purcell effect. Here we present a broadband Purcell filter that decouples the reset and readout paths, enabling both operations to be independently optimized without compromising qubit coherence. The filter employs two engineered notches - an intrinsic notch and a bandstop notch - to provide broadband Purcell protection, together with an additional reset stub that creates a reset mode below the protected band. To enable fast reset while suppressing filter-mediated interactions between qubits, we couple each qubit to a dedicated reset resonator. We experimentally demonstrate Purcell-limited relaxation times exceeding 1 ms across a 1.2 GHz bandwidth, simultaneously with 500 ns readout without a Josephson parametric amplifier and 100 ns reset with 99.6% efficiency. The reset resonator is designed with a deliberate kappa-chi mismatch, which suppresses photon-shot-noise-induced dephasing by a factor of 70 compared to the readout resonator. Our work provides a scalable hardware solution that resolves the traditional trade-off between fast qubit operations and qubit protection, advancing the prospects for fault-tolerant quantum computing.
In superconducting qubits, suppression of spontaneous emission is essential to achieve fast dispersive measurement and reset without sacrificing qubit lifetime. We show that resonator-mediated decay of the qubit mode to the feedline can be suppressed using destructive interference, where the readout resonator is coupled to the feedline at two points. This ``interferometric Purcell filter'' does not require dedicated filter components or impedance mismatch in the feedline, making it suitable for applications such as all-pass readout. We design and fabricate a device with the proposed scheme and demonstrate suppression of resonator-mediated decay that exceeds 2 orders of magnitude over a bandwidth of 400MHz400\phantom{\rule{0.1em}{0ex}}\mathrm{M}\mathrm{Hz}400MHz for a resonator linewidth of 13.8 MHz.
In circuit quantum electrodynamics, measuring the state of a superconducting qubit introduces a loss channel, which can enhance spontaneous emission through the Purcell effect, thus decreasing the qubit lifetime. This decay can be mitigated by performing the measurement through a Purcell filter, which strongly suppresses signal propagation at the qubit transition frequency. If the filter is also well-matched at the readout cavity frequency, it will protect the qubit from decoherence channels without sacrificing measurement bandwidth. We propose and analyze design for a mechanical Purcell filter, which we also fabricate and characterize at room temperature. The filter is composed of an array of nanomechanical resonators in thin-film lithium niobate, connected in a ladder topology, with series and parallel resonances arranged to produce a bandpass response. Their modest footprint, steep band edges, and lack of cross talk make these filters an appealing alternative to analogous electromagnetic versions currently used in microwave quantum machines.
We introduce and analyze a dispersive qubit readout scheme where two-mode squeezing is generated directly in the measurement cavities. The resulting suppression of noise enables fast, high-fidelity readout of naturally weakly coupled qubits, and the possibility to protect strongly coupled qubits from decoherence by weakening their coupling. Unlike other approaches exploiting squeezing, our setup avoids the difficult task of transporting and injecting with high fidelity an externally generated squeezed state. Our setup is also surprisingly robust against unwanted non-QND backaction effects, as interference naturally suppresses Purcell decay: the system acts as its own Purcell filter. Our setup is compatible with the experimental state-of-the-art in circuit QED systems, but the basic idea could also be realized in other systems.
Strong coupling of semiconductor spin qubits to superconducting microwave resonators was recently demonstrated [X. Mi et al., Nature 555, 599 (2018); A. J. Landig et al., Nature 560, 179 (2018); N. Samkharadze et al., Science 359, 1123 (2018); T. Cubaynes et al., NPJ Quant. Inf. 5, 47 (2019)]. These breakthroughs pave the way for quantum information processing that combines the long coherence times of solid-state spin qubits with the long-distance connectivity, fast control, and fast high-fidelity quantum-non-demolition readout of existing superconducting qubit implementations. Here we theoretically analyze and optimize the dispersive readout of a single spin in a semiconductor double quantum dot (DQD) coupled to a microwave resonator via its electric dipole moment. The strong spin-photon coupling arises from the motion of the electron spin in a local magnetic field gradient. We calculate the signal-to-noise ratio (SNR) of the readout accounting for both Purcell spin relaxation and spin relaxation arising from intrinsic electric noise within the semiconductor. We express the maximum achievable SNR in terms of the cooperativity associated with these two dissipation processes. We find that while the cooperativity increases with the strength of the dipole coupling between the DQD and the resonator, it does not depend on the strength of the magnetic field gradient. We then optimize the SNR as a function of experimentally tunable DQD parameters. We identify wide regions of parameter space where the unwanted backaction of the resonator photons on the qubit is small. Moreover, we find that the coupling of the resonator to other DQD transitions can enhance the SNR by at least a factor of two, a ``straddling'' effect [J. Koch et al., Phys. Rev. A 76, 042319 (2007)] that occurs only at nonzero energy detuning of the DQD double-well potential. We estimate that with current technology, single-shot readout fidelities in the range 82--95% can be achieved within a few $\ensuremath{\mu}\mathrm{s}$ of readout time without requiring the use of Purcell filters.