Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.30768 · Applied Physics Letters

Geometric dependence of critical-current variation in Al/AlO${\rm _x}$/Al Josephson junctions: a model-based analysis

K. Kakuyanagi, N. Teran, H. Toida, S. Saito

quant-phcond-mat.supr-conSubmitted May 29, 2026• Announced Jun 1, 2026• 0 citations
arXivHTMLPDF

Abstract

Achieving uniform critical current across Josephson junctions is essential for the large-scale integration of superconducting quantum circuits. In this work, we statistically analyzed the variation of the critical current of Al/AlO${\rm _x}$/Al junctions using room-temperature tunnel resistance statistics, and identified the dominant contribution among the modeled sources of the variation based on their dependence on geometry and deposition conditions of junctions. Our model-based analysis reveals that fluctuations in the Al film thickness play the dominant role among the modeled contributing factors. Based on this analysis, we found that, in Dolan-bridge double-angle deposition, adopting a deposition angle of 30-degree for bilayer junctions significantly improves uniformity, yielding a relative standard deviation of 1.2% (0.5%) across a 9.75 mm (1.5 mm) square region.

Comments
8 pages, 4 figures, including supplementary material

Related papers

Geometric dependence of Josephson junction normal-state resistance for superconducting qubit design

Dae-Yun Kim, Seon-Myeong Choi, Dae Seok Han +4 more

Josephson junctions (JJs) are critical components in superconducting quantum circuits, where their electrical properties directly determine qubit transition frequencies. While advances in fabrication have enabled precise control over junction area and oxide thickness, the influence of junction geometry beyond area has remained largely unexplored. Here, we report clear and reproducible evidence that the normal-state resistance (Rn) of JJs depends strongly on geometric parameters, demonstrating that (Rn) exhibits a systematic and reproducible dependence on junction geometry beyond simple area scaling. To account for this behavior, we introduce an edge-resistance model that incorporates perimeter-related contributions to (Rn). Our findings highlight the crucial role of geometric design in JJ electrical characteristics and provide a practical framework for improving frequency precision and uniformity in large-scale superconducting quantum processors.

Journal of Applied Physics•Mar 20, 2026•1 citation

Uniformity improvement of Josephson-junction resistance by considering sidewall deposition during shadow evaporation for large-scale integration of qubits

Tsuyoshi Takahashi, Norinao Kouma, Yoshiyasu Doi +3 more

Abstract The uniformity of Josephson-junction (JJ) characteristics is crucial in wafer-scale superconducting quantum-bit (qubit) integration. To achieve the level of accuracy demanded the circuits, every detail of the fabrication process needs to be optimized. Here we reveal that the junction-resistance (R N) variations of Al/AlO x /Al JJs are affected by the metal deposition on the sidewall of the resist mask during shadow evaporation. The effect is reproduced in numerical simulation using a simple model taking into account the resist structure and the evaporation angle. To overcome the issue, we introduce a two-step shadow evaporation method to reduce the variation of R N. As a result, the coefficient of variations across a 3-inch wafer decreases from 6.7% to 4.5%, achieving 1.1% in a chip with an area of 10 mm × 10 mm. This method is promising for developing large-scale superconducting quantum computers.

Japanese Journal of Applied Physics•Nov 14, 2022•13 citations

Fabrication and I-V Characterization of an Al/AlO x /Al Josephson Junction for Superconducting Qubits

Gustavo Moreto, Diego Molina, Everton Arrighi +1 more

Josephson junctions are key devices in circuit quantum electrodynamics (cQED) and play a central role in quantum technologies. Among the different types, superconductor-insulator-superconductor (S-I-S) junctions based on aluminum/aluminum oxide/aluminum stacks are widely used in superconducting qubits. Despite being a well-established topic, Josephson junctions still present a rich variety of physical regimes and behaviors that require careful experimental investigation. In this work, we present the fabrication of a Dolan-type Josephson junction and its current-voltage (I-V) characterization process. The fabricated devices exhibit good process reproducibility, with approximately 90% yield and a room-temperature resistance variation of about 10% between junctions. The measured I-V curves show nonlinear behavior and hysteresis, consistent with an underdamped regime, while also displaying signatures of phase diffusion. Key parameters such as the normal-state resistance, quasiparticle resistance, critical current, and superconducting gap voltage are extracted and show good agreement with the Ambegaokar-Baratoff relation. The measurement setup and filtering scheme used for the characterization are also described.

Symposium on Microelectronics Technology and Devices•Aug 1, 2026•0 citations

Fabrication of Al/AlOx/Al junctions with high uniformity and stability on sapphire substrates

Yuzhen Zheng, Shuming Li, Zengqian Ding +3 more

Abstract Tantalum and aluminum on sapphire are widely used platforms for qubits of long coherent time. As quantum chips scale up, the number of Josephson junctions on sapphire increases. Thus, both the uniformity and stability of the junctions are crucial to quantum devices, such as scalable superconducting quantum computer circuit, and quantum-limited amplifiers. By optimizing the fabrication process, especially, the conductive layer during the electron beam lithography process, Al/AlO x /Al junctions of sizes ranging from 0.0169 to 0.04 µm 2 on sapphire substrates were prepared. The relative standard deviation of room temperature resistances ( R N ) – $${\upsigma }_{{R_{{\text{N}}} }} /\left\langle {R_{{\text{N}}} } \right\rangle$$ σ R N / R N of these junctions is better than 1.7% on 15 mm × 15 mm chips, and better than 2.66% on 2 inch wafers, which is the highest uniformity on sapphire substrates has been reported. The junctions are robust and stable in resistances as temperature changes. The resistances increase by the ratio of 9.73% relative to R N as the temperature ramp down to 4 K, and restore their initial values in the reverse process as the temperature ramps back to room temperature. After being stored in a nitrogen cabinet for 100 days, the resistance of the junctions changed by1.16% on average. The demonstration of uniform and stable Josephson junctions in large area paves the way for the fabrication of superconducting chip of hundreds of qubits on sapphire substrates.

arXiv:2305.10956•Scientific Reports•Jul 22, 2023•12 citations

Device variability of Josephson junctions induced by interface roughness

Yu Zhu, Félix Beaudoin, Hong Guo

As quantum processors scale to large qubit numbers, device-to-device variability emerges as a critical challenge. Superconducting qubits are commonly realized using Al/AlO$_{\text{x}}$/Al Josephson junctions operating in the tunneling regime, where even minor variations in device geometry can lead to substantial performance fluctuations. In this work, we develop a quantitative model for the variability of the Josephson energy $E_{J}$ induced by interface roughness at the Al/AlO$_{\text{x}}$ interfaces. The roughness is modeled as a Gaussian random field characterized by two parameters: the root-mean-square roughness amplitude $σ$ and the transverse correlation length $ξ$. These parameters are extracted from the literature and molecular dynamics simulations. Quantum transport is treated using the Ambegaokar--Baratoff relation combined with a local thickness approximation. Numerical simulations over $5,000$ Josephson junctions show that $E_{J}$ follows a log-normal distribution. The mean value of $E_{J}$ increases with $σ$ and decreases slightly with $ξ$, while the variance of $E_{J}$ increases with both $σ$ and $ξ$. These results paint a quantitative and intuitive picture of Josephson energy variability induced by surface roughness, with direct relevance for junction design.

quant-pharXiv:2602.03037•Feb 4, 2026•0 citations

Improving Josephson junction reproducibility for superconducting quantum circuits: junction area fluctuation

Anastasiya A. Pishchimova, Nikita S. Smirnov, Daria A. Moskaleva +6 more

Abstract Josephson superconducting qubits and parametric amplifiers are prominent examples of superconducting quantum circuits that have shown rapid progress in recent years. As such devices become more complex, the requirements for reproducibility of their electrical properties across a chip are being tightened. Critical current of the Josephson junction Ic is the essential electrical parameter in a chip. So, its variation is to be minimized. According to the Ambegaokar–Baratoff formula, critical current is related to normal-state resistance, which can be measured at room temperature. In this study, we focused on the dominant source of non-uniformity for the Josephson junction critical current–junction area variation. We optimized Josephson junction fabrication process and demonstrated resistance variation of 9.8–4.4% and 4.8–2.3% across 22 × 22 mm2 and 5 × 10 mm2 chip areas, respectively. For a wide range of junction areas from 0.008 to 0.12 μm2, we ensure a small linewidth standard deviation of 4 nm measured over 4500 junctions with linear dimensions from 80 to 680 nm. We found that the dominate source of junction area variation limiting $${\mathrm{I}}_{\mathrm{c}}$$ I c reproducibility is the imperfection of the evaporation system. The developed fabrication process was tested on superconducting highly coherent transmon qubits (T1 > 100 μs) and a nonlinear asymmetric inductive element parametric amplifier.

arXiv:2210.15293•Scientific Reports•Apr 25, 2023•46 citations
Geometric dependence of critical-current variation in Al/AlOx{\rm _x}x​/Al Josephson junctions: a model-based analysis
Achieving uniform critical current across Josephson junctions is essential for the large-scale integration of superconducting quantum circuits. In this work, we statistically analyzed the variation of the critical current of Al/AlOx{\rm _x}x​/Al junctions using room-temperature tunnel resistance statistics, and identified the dominant contribution among the modeled sources of the variation based on their dependence on geometry and deposition conditions of junctions. Our model-based analysis reveals that fluctuations in the Al film thickness play the dominant role among the modeled contributing factors. Based on this analysis, we found that, in Dolan-bridge double-angle deposition, adopting a deposition angle of 30-degree for bilayer junctions significantly improves uniformity, yielding a relative standard deviation of 1.2% (0.5%) across a 9.75 mm (1.5 mm) square region.
Josephson junctions (JJs) are critical components in superconducting quantum circuits, where their electrical properties directly determine qubit transition frequencies. While advances in fabrication have enabled precise control over junction area and oxide thickness, the influence of junction geometry beyond area has remained largely unexplored. Here, we report clear and reproducible evidence that the normal-state resistance (Rn) of JJs depends strongly on geometric parameters, demonstrating that (Rn) exhibits a systematic and reproducible dependence on junction geometry beyond simple area scaling. To account for this behavior, we introduce an edge-resistance model that incorporates perimeter-related contributions to (Rn). Our findings highlight the crucial role of geometric design in JJ electrical characteristics and provide a practical framework for improving frequency precision and uniformity in large-scale superconducting quantum processors.
Abstract The uniformity of Josephson-junction (JJ) characteristics is crucial in wafer-scale superconducting quantum-bit (qubit) integration. To achieve the level of accuracy demanded the circuits, every detail of the fabrication process needs to be optimized. Here we reveal that the junction-resistance (R N) variations of Al/AlO x /Al JJs are affected by the metal deposition on the sidewall of the resist mask during shadow evaporation. The effect is reproduced in numerical simulation using a simple model taking into account the resist structure and the evaporation angle. To overcome the issue, we introduce a two-step shadow evaporation method to reduce the variation of R N. As a result, the coefficient of variations across a 3-inch wafer decreases from 6.7% to 4.5%, achieving 1.1% in a chip with an area of 10 mm × 10 mm. This method is promising for developing large-scale superconducting quantum computers.
Josephson junctions are key devices in circuit quantum electrodynamics (cQED) and play a central role in quantum technologies. Among the different types, superconductor-insulator-superconductor (S-I-S) junctions based on aluminum/aluminum oxide/aluminum stacks are widely used in superconducting qubits. Despite being a well-established topic, Josephson junctions still present a rich variety of physical regimes and behaviors that require careful experimental investigation. In this work, we present the fabrication of a Dolan-type Josephson junction and its current-voltage (I-V) characterization process. The fabricated devices exhibit good process reproducibility, with approximately 90% yield and a room-temperature resistance variation of about 10% between junctions. The measured I-V curves show nonlinear behavior and hysteresis, consistent with an underdamped regime, while also displaying signatures of phase diffusion. Key parameters such as the normal-state resistance, quasiparticle resistance, critical current, and superconducting gap voltage are extracted and show good agreement with the Ambegaokar-Baratoff relation. The measurement setup and filtering scheme used for the characterization are also described.
Abstract Tantalum and aluminum on sapphire are widely used platforms for qubits of long coherent time. As quantum chips scale up, the number of Josephson junctions on sapphire increases. Thus, both the uniformity and stability of the junctions are crucial to quantum devices, such as scalable superconducting quantum computer circuit, and quantum-limited amplifiers. By optimizing the fabrication process, especially, the conductive layer during the electron beam lithography process, Al/AlO x /Al junctions of sizes ranging from 0.0169 to 0.04 µm 2 on sapphire substrates were prepared. The relative standard deviation of room temperature resistances ( R N ) – $${\upsigma }_{{R_{{\text{N}}} }} /\left\langle {R_{{\text{N}}} } \right\rangle$$ σ R N / R N of these junctions is better than 1.7% on 15 mm × 15 mm chips, and better than 2.66% on 2 inch wafers, which is the highest uniformity on sapphire substrates has been reported. The junctions are robust and stable in resistances as temperature changes. The resistances increase by the ratio of 9.73% relative to R N as the temperature ramp down to 4 K, and restore their initial values in the reverse process as the temperature ramps back to room temperature. After being stored in a nitrogen cabinet for 100 days, the resistance of the junctions changed by1.16% on average. The demonstration of uniform and stable Josephson junctions in large area paves the way for the fabrication of superconducting chip of hundreds of qubits on sapphire substrates.
As quantum processors scale to large qubit numbers, device-to-device variability emerges as a critical challenge. Superconducting qubits are commonly realized using Al/AlOx_{\text{x}}x​/Al Josephson junctions operating in the tunneling regime, where even minor variations in device geometry can lead to substantial performance fluctuations. In this work, we develop a quantitative model for the variability of the Josephson energy EJE_{J}EJ​ induced by interface roughness at the Al/AlOx_{\text{x}}x​ interfaces. The roughness is modeled as a Gaussian random field characterized by two parameters: the root-mean-square roughness amplitude σσσ and the transverse correlation length ξξξ. These parameters are extracted from the literature and molecular dynamics simulations. Quantum transport is treated using the Ambegaokar--Baratoff relation combined with a local thickness approximation. Numerical simulations over 5,0005,0005,000 Josephson junctions show that EJE_{J}EJ​ follows a log-normal distribution. The mean value of EJE_{J}EJ​ increases with σσσ and decreases slightly with ξξξ, while the variance of EJE_{J}EJ​ increases with both σσσ and ξξξ. These results paint a quantitative and intuitive picture of Josephson energy variability induced by surface roughness, with direct relevance for junction design.
Abstract Josephson superconducting qubits and parametric amplifiers are prominent examples of superconducting quantum circuits that have shown rapid progress in recent years. As such devices become more complex, the requirements for reproducibility of their electrical properties across a chip are being tightened. Critical current of the Josephson junction Ic is the essential electrical parameter in a chip. So, its variation is to be minimized. According to the Ambegaokar–Baratoff formula, critical current is related to normal-state resistance, which can be measured at room temperature. In this study, we focused on the dominant source of non-uniformity for the Josephson junction critical current–junction area variation. We optimized Josephson junction fabrication process and demonstrated resistance variation of 9.8–4.4% and 4.8–2.3% across 22 × 22 mm2 and 5 × 10 mm2 chip areas, respectively. For a wide range of junction areas from 0.008 to 0.12 μm2, we ensure a small linewidth standard deviation of 4 nm measured over 4500 junctions with linear dimensions from 80 to 680 nm. We found that the dominate source of junction area variation limiting Ic{\mathrm{I}}_{\mathrm{c}}Ic​ I c reproducibility is the imperfection of the evaporation system. The developed fabrication process was tested on superconducting highly coherent transmon qubits (T1 > 100 μs) and a nonlinear asymmetric inductive element parametric amplifier.