Quantum-centric supercomputing (in which a quantum processor samples the dominant electronic configurations and classical high-performance computing resources perform the diagonalisation) is emerging as a practical route to correlated electronic-structure calculations. We present QuantumPave, a hybrid quantum-classical workflow for computing additive binding energies in asphalt binder, a quantity central to the oxidative ageing of road infrastructure. Using a 24-atom pyridine-phenol hydrogen-bonded complex as a representative model, we couple machine-learning interatomic potentials (ORB v3) for geometry optimisation with quantum-selected configuration interaction (QSCI), also referred to as sample based quantum diagonalisation (SQD), in a (10e, 10o) active space run on the 54-qubit IQM Emerald processor. On hardware, SQD reproduces the active-space CASCI reference exactly, giving a binding energy of -3.52 kcal/mol (-0.153 eV); the device noise broadens the sampling to span the active space, so no zero-noise extrapolation is required. This active-space value captures the static correlation within the chosen orbitals and underbinds the full hydrogen bond: a counterpoise-corrected CCSD(T) benchmark gives -8.5 to -9.5 kcal/mol, while the calorimetric enthalpy of about -6.25 kcal/mol is consistent with this once zero-point, thermal, and solvent contributions are included. We show that chemically meaningful binding energies for an industrially relevant materials problem are attainable on current quantum hardware within a quantum-centric supercomputing workflow.
Quantum-centric supercomputing (in which a quantum processor samples the dominant electronic configurations and classical high-performance computing resources perform the diagonalisation) is emerging as a practical route to correlated electronic-structure calculations. We present QuantumPave, a hybrid quantum-classical workflow for computing additive binding energies in asphalt binder, a quantity central to the oxidative ageing of road infrastructure. Using a 24-atom pyridine-phenol hydrogen-bonded complex as a representative model, we couple machine-learning interatomic potentials (ORB v3) for geometry optimisation with quantum-selected configuration interaction (QSCI), also referred to as sample based quantum diagonalisation (SQD), in a (10e, 10o) active space run on the 54-qubit IQM Emerald processor. On hardware, SQD reproduces the active-space CASCI reference exactly, giving a binding energy of -3.52 kcal/mol (-0.153 eV); the device noise broadens the sampling to span the active space, so no zero-noise extrapolation is required. This active-space value captures the static correlation within the chosen orbitals and underbinds the full hydrogen bond: a counterpoise-corrected CCSD(T) benchmark gives -8.5 to -9.5 kcal/mol, while the calorimetric enthalpy of about -6.25 kcal/mol is consistent with this once zero-point, thermal, and solvent contributions are included. We show that chemically meaningful binding energies for an industrially relevant materials problem are attainable on current quantum hardware within a quantum-centric supercomputing workflow.
Modelling and simulating non-covalent interactions is challenging, as they are inherently weak, dynamic, and system-specific. Common predictive methods often require trading the accuracy for reducing the otherwise cumbersome computational cost. To date, the most accurate approaches, achieving chemical accuracy, rely on quantum mechanical descriptions of non-covalent interactions, which limits their scalability. Whether quantum computing could overcome these limitations is still unclear, as such methods need to be redesigned for quantum hardware. Here, we take the first step in this direction by presenting quantum-centric simulations of non-covalent interactions using a supramolecular approach for binding energy calculations. We use a sample-based quantum diagonalization (SQD) approach to simulate the potential energy surfaces (PES) of the water and methane dimers, featuring hydrogen bond and dispersion interactions, respectively. We benchmark our quantum simulations (27- and 36-qubit circuits) against classical methods, registering deviations within 1.000 kcal/mol from the leading ones. Finally, we test the limits of the quantum methods for capturing dispersion interactions with an experiment on 54 qubits. Beyond reaching state-of-the-art accuracy, our work lays out a framework for electronic structure calculations of non-covalent interactions on quantum hardware. The authors present sample-based quantum diagonalization (SQD) simulations of non-covalent interactions that match the accuracy of state-of-the-art classical methods. These results mark a key step towards quantum advantage, though further advances are needed to fully realize this potential.
This work demonstrated a proof-of-concept use case for the emerging quantum-centric supercomputing approaches combining HPC resources with quantum computers. We presented a systematic implementation of hybrid quantum-classical computational method for accelerating atomistic simulations studying corrosion inhibition. We used aluminium surface with screened inhibitor molecule on top. We combined density functional theory (DFT) with quantum algorithm through an active space embedding scheme. We chosen inhibitor molecules of 1,2,4-Triazole and 1,2,4-Triazole-3-thiol. Our implementation leveraged the ADAPT-VQE algorithm with benchmarking against classical DFT calculations, achieving binding energies of -0.386 eV and -1.279 eV for 1,2,4-Triazole and 1,2,4-Triazole-3-thiol, respectively. The binding energy of the thiol derivative aligned with experimental observations regarding sulfur-functionalized inhibitors' which could improve corrosion protection. The methodology employed the orb-d3-v2 machine learning potential for rapid geometry optimizations, followed by accurate DFT calculations using CP2K with PBE functional and Grimme's D3 dispersion corrections. CP2K is a robust DFT package that can scale on HPC classical resources of CPUs and GPUs efficiently. We also benchmarked against smaller systems and revealed that StatefulAdaptVQE implementation achieves a 5-6×computational speedup while maintaining accuracy. This work contributes to the literature studying quantum-accelerated materials science applied to periodic systems, demonstrating the viability of hybrid quantum-classical approaches for studying surface-adsorbate interactions in corrosion inhibition applications. In which, can be transferable to other applications such as carbon capture on metal oxide frameworks and solid-state battery materials studies.
Quantum-centric supercomputing (QCSC) approaches, such as sample-based quantum diagonalization (SQD), combine quantum processors with high-performance computers (HPC), offering a promising route toward solving challenging electronic structure problems. However, implementation of QCSC approaches to large active space calculations is constrained by the associated number of qubits, deep quantum circuits, sampling cost, and large-scale Hamiltonian diagonalization. To overcome these limitations, we introduce a distributed QCSC framework that decomposes complex molecular problems into parallel sub-problems requiring fewer qubits, shallower circuits, and reduced shot budgets. A physically motivated, two-step aggregation scheme then reconstructs the global solution: first, a computational bit assignment strategy optimizes a cost function to appropriately map local bit indices to global ones, yielding a mapped tensor product state (MTPS); second, an inter-fragment correlation recovery module restores missing cross-fragment interactions. Herein, we employ a multi-layered generative machine learning architecture, starting with utilizing the recently proposed physics-informed generative SQD (PIGen-SQD) as a distributed QCSC solver, followed by a secondary generative module to model configuration distributions and identify dominant sectors of the global Hilbert space. For water and formamide dimers, our method achieves up to 95% reduction in the diagonalization dimension while enhancing energy accuracy by an order of magnitude over conventional SQD. Furthermore, application to the water hexamer ((H2O)6) cage successfully decomposes a 120-qubit problem into six 20-qubit monomeric subsystems, and stitches the monomers under a dimeric approximation, demonstrating excellent agreement with the reference classical methods.
We present the first quantum-centric simulations of noncovalent interactions using a supramolecular approach. We simulate the potential energy surfaces (PES) of the water and methane dimers, featuring hydrophilic and hydrophobic interactions, respectively, with a sample-based quantum diagonalization (SQD) approach. Our simulations on quantum processors, using 27- and 36-qubit circuits, are in remarkable agreement with classical methods, deviating from complete active space configuration interaction (CASCI) and coupled-cluster singles, doubles, and perturbative triples (CCSD(T)) within 1 kcal/mol in the equilibrium regions of the PES. Finally, we test the capacity limits of the quantum methods for capturing hydrophobic interactions with an experiment on 54 qubits. These results mark significant progress in the application of quantum computing to chemical problems, paving the way for more accurate modeling of noncovalent interactions in complex systems critical to the biological, chemical and pharmaceutical sciences.
Calculation of binding energies for protein-ligand molecular systems requires accurate treatment of the electronic structure, a quantum chemistry problem that scales exponentially on classical hardware, while current quantum hardware remains too noisy for the required circuit depths. This report presents a hybrid quantum-classical workflow performed on the Fujitsu FX700 ideal state-vector simulator using QARP that addresses two structural inefficiencies in quantum-sampling-based diagonalization workflows. First, we integrate the Linear Scaling CNOT UCCSD (LCNot-UCCSD) ansatz into the QSCI framework, replacing the O(N6) CCSD parameter initialization of the competing LUCJ ansatz approach with O(N4) MP2-amplitude initialization. Second, we introduce QSCI-RBM, a variant that replaces the configuration recovery of the SQD framework with a Restricted Boltzmann Machine (RBM) acting as a compact generative subspace expansion model. Both are evaluated on eight different molecules in STO-3G across 14 controlled artificial error levels with 100 independent runs each, validated on potential energy surface scans of the N2 molecule in cc-pVDZ, and embedded within DMET to treat the FDA-approved antiviral Amantadine (C10H17N, 11 DMET fragments) and the active region of the SARS-CoV-2 main protease complexed with its covalent inhibitor Carmofur (PDB: 7BUY, C15H28N4O5S, 10 fragments). To our knowledge, this is the first deployment of LCNot-UCCSD within QSCI on a quantum computing simulator, and the first DMET-QSCI(LCNot-UCCSD)-RBM application to an industry-relevant protein-ligand system. By utilizing a fraction of the classical computing resources required by the current state-of-the-art work by Cleveland Clinic, RIKEN, and IBM Quantum, this approach enables more efficient and economical drug discovery simulations for the industry.
We present a large-scale experimental study of quantum-computing-based molecular simulation carried out on IQM's Sirius 24-qubit superconducting processor, utilizing up to 16 operational qubits. The work employs Sample-based Quantum Diagonalization (SQD) together with the Local Unitary Cluster Jastrow (LUCJ) ansatz to estimate ground-state energies for a set of benchmark molecules, including H2, LiH, BeH2, H2O, and NH3. In addition, we introduce a Linear-CNOT variant of the Unitary Coupled-Cluster Singles and Doubles (LCNot-UCCSD) ansatz within the SQD workflow, trading higher circuit depth for reduced classical preprocessing. A comparison between these ansätze is provided, clarifying their respective strengths, limitations, and suitability for near-term quantum hardware. We further explore potential energy landscapes through 1D scans for H2 and HeH+ using both STO-3G and 6-31G basis sets, and for LiH and BeH2 in STO-3G. Extending beyond this, we demonstrate the experimental construction of a full 2D potential energy surface for the water molecule on quantum hardware, mapped over a 32 × 32 grid in bond length and bond angle. To move beyond small benchmark systems, we combine SQD(LUCJ) with Density Matrix Embedding Theory (DMET) to compute active-space energies for a set of ligand-like molecules, as well as the pharmacologically relevant amantadine system. Across all studies, the majority of quantum-computed energies agree with reference FCI results, as well as with DMET-CASCI energies for embedded systems, to within chemical accuracy for the chosen basis sets. These results demonstrate the reliability of sample-based diagonalization approaches and underscore the potential of hybrid embedding strategies for extending quantum simulations to increasingly complex molecular systems, while also highlighting their practicality on current IQM quantum hardware.