Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.25948

Unified Flux Control Architecture for Fluxonium Qubits

Xianchuang Pan, Jiahui Wang, Tao Zhou, Yanbo Guo, Fei Wang, Ze Zhan, Liang Xiang, Zishuo Li, Lu Ma, Xizheng Ma, Huijuan Zhan, Tao Zhang, Kannan Lu, Xing Zhu, Guicheng Gong, Chunqing Deng, Tenghui Wang

quant-phSubmitted May 25, 2026• Announced May 26, 2026• 0 citations• Revised May 29, 2026 (v2)
v1 · May 25, 2026v2 · May 29, 2026
arXivHTMLPDF

Abstract

Control architectures that reduce hardware overhead while maintaining high-fidelity operations are essential for the continued scaling of superconducting quantum processors. Here we experimentally realize a unified control architecture for fluxonium qubits, in which both transverse ($XY$) and longitudinal ($Z$) operations are implemented through a single flux-control channel driven by a single arbitrary waveform generator channel. This architecture imposes competing requirements on the shared control channel, which must simultaneously support low-frequency flux transmission for reset operations while strongly attenuating broadband noise near the qubit transition frequency. We address this challenge through frequency-selective cryogenic filtering together with compensated waveform synthesis that corrects the pulse distortion introduced by the filtered control line. Experimentally, this approach preserves coherence times above 100 $μ$s while enabling active reset with approximately 98% fidelity and 20-ns single-qubit gates with fidelities exceeding 99.99%. We further demonstrate FPGA-native instruction-level waveform synthesis based on reusable pulse primitives for unified flux control. These results establish unified flux control as a scalable architecture for fluxonium qubits that reduces control hardware overhead while preserving high-fidelity operation.

Comments
13 pages, 7 figures

Related papers

Universal Fast-Flux Control of a Coherent, Low-Frequency Qubit

Helin Zhang, Srivatsan Chakram, Tanay Roy +6 more

The heavy-fluxonium circuit is a promising building block for superconducting quantum processors due to its long relaxation and dephasing time at the flux-frustration point. However, the suppressed charge matrix elements and low transition frequency make it challenging to perform fast single-qubit gates using standard protocols. We report on new protocols for reset, fast coherent control,and readout that allow high-quality operation of the qubit with a 14 MHz transition frequency, an order of magnitude lower in energy than the ambient thermal energy scale. We utilize higher levels of the fluxonium to read out the qubit state and to initialize the qubit with 97% fidelity corresponding to cooling it to 190 μK. Instead of using standard microwave pulses, we control the qubit only with fast-flux pulses, generating control fields much larger than the qubit frequency. We develop a universal set of gates based on nonadiabatic Landau-Zener transitions that act in 20-60 ns, less than the single-qubit Larmor period. We measure qubit coherence of T1,T2e∼300 μs for a fluxonium in a 2D architecture and realize single-qubit gates with an average gate fidelity of 99.8% as characterized by randomized benchmarking.

•Jan 15, 2021•116 citations

High fidelity two-qubit gates on fluxoniums using a tunable coupler

Ilya N. Moskalenko, Ilya A. Simakov, Nikolay N. Abramov +7 more

Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.

arXiv:2203.16302•npj Quantum Information•Nov 8, 2022•132 citations

System-Level Design of Scalable Fluxonium Quantum Processors with Double-Transmon Couplers

Guo Xuan Chan, Wangwei Lan, Tenghui Wang +3 more

Fluxonium qubits combine long coherence times with strong anharmonicity, making them a promising platform for scalable superconducting quantum processors. Recent experiments have demonstrated high-fidelity operations in multi-qubit processors while suppressing stray qubit interactions using fluxonium-transmon-fluxonium (FTF) architectures. However, scaling such systems to larger arrays is constrained by a trade-off between achievable coupling strength, crosstalk suppression and qubit-qubit spacing required for wiring in a two-dimensional architecture. Multimode couplers, such as the double-transmon coupler (DTC), provide a promising pathway to overcome this limitation by enabling stronger interactions without compromising qubit spacing and isolation. Here, we develop a quantitative design framework for fluxonium-based quantum processors employing DTCs. Central to this work is a frequency-partitioned architecture that places qubit transitions, tunable-coupler excitations, and resonator modes in well-separated spectral regions. This structured allocation reduces parameter interdependence and enables the concurrent optimization of gate operations, readout, and qubit reset. By formulating device design as a multi-objective optimization problem under realistic experimental constraints and fabrication-induced disorder, we develop a tractable sequential workflow and determine a feasible parameter regime that simultaneously supports high-fidelity single- and two-qubit gates, fast qubit reset, and robust dispersive readout. These results establish a system-level architectural methodology that links circuit parameters to processor-level performance, and provide an experimentally actionable pathway toward scalable fluxonium quantum processors.

quant-pharXiv:2604.26373•Apr 30, 2026•5 citations

Subharmonic Control of a Fluxonium Qubit via a Purcell-Protected Flux Line

J. Schirk, Florian Wallner, L. Huang +21 more

Protecting qubits from environmental noise while maintaining strong coupling for fast high-fidelity control is a central challenge for quantum information processing. Here, we demonstrate a control scheme for superconducting fluxonium qubits that eliminates qubit decay through the control channel by suppressing the environmental density of states at the transition frequency. Adding a low-pass filter on the flux line allows for flux-biasing and, at the same time, coherently controlling the fluxonium qubit by parametrically driving it at integer fractions of its transition frequency. We compare the filtered to the unfiltered configuration and find a 5-times-longer T 1 , and a 10-times-improved T 2 -echo time in the filtered case. We demonstrate coherent control with up to 11-photon subharmonic drives, highlighting the strong nonlinearity of the fluxonium potential. Measured Rabi frequencies and drive-induced frequency shifts show excellent agreement with numerical and analytical models. Furthermore, we show the equivalence of a 3-photon subharmonic drive to an on-resonance drive by benchmarking subharmonic gate fidelities above 99.94%. These results open up a scalable path for full qubit control through a single Purcell-protected channel, providing strong suppression of control-induced decoherence and enabling wiring-efficient superconducting quantum processors.

arXiv:2410.00495•PRX Quantum•Jun 24, 2025•14 citations

High-speed control of a fluxonium qubit via picosecond pulses from Josephson digital circuits

M. V. Bastrakova, D. S. Pashin, V. A. Vozhakov +2 more

We develop a control strategy for fluxonium qubits based on picosecond single-flux-quantum (SFQ) pulses generated by Josephson digital circuits. A major challenge is that SFQ protocols originally designed for transmon control become inefficient for low-frequency fluxonium. In this regime, the asymmetry of flux and charge couplings leads either to excessive leakage or excessively long gate times. We show that this limitation can be overcome by two complementary protocols. The first protocol employs high-frequency SFQ pulse packets applied through the flux channel, offering a simple, analytically transparent, and robust approach for high-fidelity single-qubit control. The second protocol combines phase-shifted flux and charge pulse sequences to enhance the resonant drive and reduce the gate duration. Multilevel simulations demonstrate single-qubit gate fidelities above $99.99\%$; the simpler protocol remains robust under moderate variations of qubit parameters and flux bias, while the combined protocol preserves high fidelity while substantially accelerating the gate. These results establish SFQ-based cryogenic control as a realistic route to fast, accurate, and scalable manipulation of fluxonium qubits.

arXiv:2611.14358•Physical Review Applied•Nov 3, 2026•0 citations

Interaction-Resilient Scalable Fluxonium Architecture with All-Microwave Gates

Andrei A. Kugut, Grigoriy S. Mazhorin, Ilya A. Simakov

Fluxonium qubits demonstrate exceptional potential for quantum processing; yet, realizing scalable architectures using them remains challenging. We propose a fluxonium-based square-grid design with fast $\sim63$~ns controlled-Z (CZ) gates, achieving coherent errors below $10^{-4}$, activated via microwave-driven transmon couplers. A central difficulty in such large-scale systems with all-microwave gates and, therefore, strong static couplings, is suppressing parasitic interactions that extend beyond nearest neighbors to include next-nearest elements. We address this issue by introducing several design strategies: the frequency allocation of both qubits and couplers, the localization of coupler wavefunctions, and a differential oscillator that suppresses residual long-range interactions. In addition, the architecture natively supports fast $\sim70$~ns CZZ gates -- three-qubit operations composed of two CZ gates sharing a common qubit -- which reduce the incoherent error by $\sim 35\%$ compared to performing the corresponding CZs sequentially. Together, these advances establish an interaction-resilient platform for large-scale fluxonium processors and can be adapted to a variety of fluxonium layouts.

quant-pharXiv:2512.21189•Physical Review Applied•Dec 25, 2025•6 citations
Control architectures that reduce hardware overhead while maintaining high-fidelity operations are essential for the continued scaling of superconducting quantum processors. Here we experimentally realize a unified control architecture for fluxonium qubits, in which both transverse (XYXYXY) and longitudinal (ZZZ) operations are implemented through a single flux-control channel driven by a single arbitrary waveform generator channel. This architecture imposes competing requirements on the shared control channel, which must simultaneously support low-frequency flux transmission for reset operations while strongly attenuating broadband noise near the qubit transition frequency. We address this challenge through frequency-selective cryogenic filtering together with compensated waveform synthesis that corrects the pulse distortion introduced by the filtered control line. Experimentally, this approach preserves coherence times above 100 μμμs while enabling active reset with approximately 98% fidelity and 20-ns single-qubit gates with fidelities exceeding 99.99%. We further demonstrate FPGA-native instruction-level waveform synthesis based on reusable pulse primitives for unified flux control. These results establish unified flux control as a scalable architecture for fluxonium qubits that reduces control hardware overhead while preserving high-fidelity operation.
The heavy-fluxonium circuit is a promising building block for superconducting quantum processors due to its long relaxation and dephasing time at the flux-frustration point. However, the suppressed charge matrix elements and low transition frequency make it challenging to perform fast single-qubit gates using standard protocols. We report on new protocols for reset, fast coherent control,and readout that allow high-quality operation of the qubit with a 14 MHz transition frequency, an order of magnitude lower in energy than the ambient thermal energy scale. We utilize higher levels of the fluxonium to read out the qubit state and to initialize the qubit with 97% fidelity corresponding to cooling it to 190 μK. Instead of using standard microwave pulses, we control the qubit only with fast-flux pulses, generating control fields much larger than the qubit frequency. We develop a universal set of gates based on nonadiabatic Landau-Zener transitions that act in 20-60 ns, less than the single-qubit Larmor period. We measure qubit coherence of T1,T2e∼300 μs for a fluxonium in a 2D architecture and realize single-qubit gates with an average gate fidelity of 99.8% as characterized by randomized benchmarking.
Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.
Fluxonium qubits combine long coherence times with strong anharmonicity, making them a promising platform for scalable superconducting quantum processors. Recent experiments have demonstrated high-fidelity operations in multi-qubit processors while suppressing stray qubit interactions using fluxonium-transmon-fluxonium (FTF) architectures. However, scaling such systems to larger arrays is constrained by a trade-off between achievable coupling strength, crosstalk suppression and qubit-qubit spacing required for wiring in a two-dimensional architecture. Multimode couplers, such as the double-transmon coupler (DTC), provide a promising pathway to overcome this limitation by enabling stronger interactions without compromising qubit spacing and isolation. Here, we develop a quantitative design framework for fluxonium-based quantum processors employing DTCs. Central to this work is a frequency-partitioned architecture that places qubit transitions, tunable-coupler excitations, and resonator modes in well-separated spectral regions. This structured allocation reduces parameter interdependence and enables the concurrent optimization of gate operations, readout, and qubit reset. By formulating device design as a multi-objective optimization problem under realistic experimental constraints and fabrication-induced disorder, we develop a tractable sequential workflow and determine a feasible parameter regime that simultaneously supports high-fidelity single- and two-qubit gates, fast qubit reset, and robust dispersive readout. These results establish a system-level architectural methodology that links circuit parameters to processor-level performance, and provide an experimentally actionable pathway toward scalable fluxonium quantum processors.
Protecting qubits from environmental noise while maintaining strong coupling for fast high-fidelity control is a central challenge for quantum information processing. Here, we demonstrate a control scheme for superconducting fluxonium qubits that eliminates qubit decay through the control channel by suppressing the environmental density of states at the transition frequency. Adding a low-pass filter on the flux line allows for flux-biasing and, at the same time, coherently controlling the fluxonium qubit by parametrically driving it at integer fractions of its transition frequency. We compare the filtered to the unfiltered configuration and find a 5-times-longer T 1 , and a 10-times-improved T 2 -echo time in the filtered case. We demonstrate coherent control with up to 11-photon subharmonic drives, highlighting the strong nonlinearity of the fluxonium potential. Measured Rabi frequencies and drive-induced frequency shifts show excellent agreement with numerical and analytical models. Furthermore, we show the equivalence of a 3-photon subharmonic drive to an on-resonance drive by benchmarking subharmonic gate fidelities above 99.94%. These results open up a scalable path for full qubit control through a single Purcell-protected channel, providing strong suppression of control-induced decoherence and enabling wiring-efficient superconducting quantum processors.
We develop a control strategy for fluxonium qubits based on picosecond single-flux-quantum (SFQ) pulses generated by Josephson digital circuits. A major challenge is that SFQ protocols originally designed for transmon control become inefficient for low-frequency fluxonium. In this regime, the asymmetry of flux and charge couplings leads either to excessive leakage or excessively long gate times. We show that this limitation can be overcome by two complementary protocols. The first protocol employs high-frequency SFQ pulse packets applied through the flux channel, offering a simple, analytically transparent, and robust approach for high-fidelity single-qubit control. The second protocol combines phase-shifted flux and charge pulse sequences to enhance the resonant drive and reduce the gate duration. Multilevel simulations demonstrate single-qubit gate fidelities above 99.99%99.99\%99.99%; the simpler protocol remains robust under moderate variations of qubit parameters and flux bias, while the combined protocol preserves high fidelity while substantially accelerating the gate. These results establish SFQ-based cryogenic control as a realistic route to fast, accurate, and scalable manipulation of fluxonium qubits.
Fluxonium qubits demonstrate exceptional potential for quantum processing; yet, realizing scalable architectures using them remains challenging. We propose a fluxonium-based square-grid design with fast ∼63\sim63∼63~ns controlled-Z (CZ) gates, achieving coherent errors below 10−410^{-4}10−4, activated via microwave-driven transmon couplers. A central difficulty in such large-scale systems with all-microwave gates and, therefore, strong static couplings, is suppressing parasitic interactions that extend beyond nearest neighbors to include next-nearest elements. We address this issue by introducing several design strategies: the frequency allocation of both qubits and couplers, the localization of coupler wavefunctions, and a differential oscillator that suppresses residual long-range interactions. In addition, the architecture natively supports fast ∼70\sim70∼70~ns CZZ gates -- three-qubit operations composed of two CZ gates sharing a common qubit -- which reduce the incoherent error by ∼35%\sim 35\%∼35% compared to performing the corresponding CZs sequentially. Together, these advances establish an interaction-resilient platform for large-scale fluxonium processors and can be adapted to a variety of fluxonium layouts.