Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.24199

Wideband Balanced Photodetectors for Classical and Quantum Light Detection from Optical, EUV, to X-rays

Ivan Ryger, Terry Brown, Dina S. Eissa, Chen-Ting Liao

physics.ins-detastro-ph.IMphysics.app-phphysics.opticsquant-phSubmitted May 22, 2026• Announced May 26, 2026
arXivHTMLPDF

Abstract

The rapid development of coherent short-wavelength light sources in the extreme ultraviolet (EUV) and soft X-ray (SXR) regimes has created a growing need for advanced optoelectronic detection capabilities, particularly for quantum-noise-limited measurements, microelectronics and semiconductor metrology, and emerging quantum information applications. However, extending balanced photodetection to these wavelength regimes is severely hindered by a fundamental bandwidth-noise trade-off imposed by the exceptionally large junction capacitance of EUV-SXR silicon photodiodes. Here, we report a novel wideband photoreceiver architecture that overcomes this bottleneck via a bootstrapped transimpedance amplifier design. By leveraging a low-noise junction field-effect transistor interface, we effectively isolate the photodiode capacitance and suppress the apparent input capacitance seen by the core amplifier. Combined with active compensation of parasitic feedback reactance, this architecture mitigates the conventional trade-off between detector active area and signal bandwidth. Experimentally, we achieved a system-level input-referred noise floor of 13 $fA/\sqrt{Hz}$, closely approaching theoretical thermal limits. Furthermore, we achieved a six-fold extension in signal-to-noise limited bandwidth and, through the implementation of a novel grounded field plate, demonstrated a common-mode rejection ratio (CMRR) exceeding 30 dB up to 100 kHz. This highly scalable, silicon-based architecture effectively bridges the short-wavelength detection gap, establishing a robust experimental platform for next-generation quantum-noise-limited and quantum-enhanced X-ray measurement, as well as ultra-sensitive inspection and metrology applications in high-numerical-aperture EUV lithography.

Comments
16 pages, 11 figures

Related papers

Large-area low-noise resonant photodetector for high-sensitivity stimulated Raman scattering spectroscopy and imaging

Wenhao Yu, Haojie Zhang, Jin Bao Guo +1 more

We report a low-noise compensated tuned amplifier (cTAMP) architecture optimized for large-area photodiodes in stimulated Raman scattering (SRS) detection. By integrating a tunable RLC feedback network with a matching compensation inductor, the design simultaneously achieves resonance enhancement and amplifier stability despite the high junction capacitance of a 10 × 10 mm 2 photodiode. As a proof of concept, a detector configured for 20 MHz center frequency and 1 MHz bandwidth exhibits an output-referred noise floor of 31 nV / Hz , enabling shot-noise-limited linear operation from 0.1 mW up to 36 mW optical power under ∼50 μs time constant in the near-IR region. This wide dynamic range and low noise performance allow faithful characterization of high-power squeezed states that saturate conventional detectors, as verified in photon-number squeezing experiments. In addition, the detector facilitates biocompatible ultrafast SRS microscopy with milliwatt-level excitation, supporting hyperspectral live cell imaging without compromising sensitivity. These results establish the cTAMP-based detector as a versatile platform for high-sensitivity quantum optics and biomedical imaging, with potential for extension to other modulation-based optical measurements.

Optics Express•Dec 18, 2025•0 citations

Integrated balanced homodyne detector using CMOS capacitive-feedback TIA for quantum measurements

Sarah Bastiaens, Cedric Bruynsteen, Simone Cammarata +5 more

A low-noise, high-speed balanced homodyne detector is demonstrated, combining a capacitive-feedback transimpedance amplifier implemented in 28 nm CMOS with a custom photonic integrated circuit fabricated in imec's iSiPP200 silicon photonics platform. The receiver achieves a 3-dB bandwidth of 7.6 GHz, a maximum shot noise clearance of 27 dB, a shot noise-limited bandwidth of 13.7 GHz and a common-mode rejection ratio up to 54.8 dB. These results demonstrate the suitability of CMOS capacitive-feedback transimpedance amplifiers for demanding quantum and coherent sensing optical applications, including continuous-variable quantum key distribution, quantum random number generation, and optical coherence tomography.

quant-pharXiv:2609.37671•Sep 30, 2026•1 citation

A low-noise, high-gain, and large-dynamic-range photodetector based on a JFET and a charge amplifier

Jinrong Wang, Shuange Wu, Chengdong Mi +2 more

We demonstrate a low-noise, high-gain, and large-dynamic-range photodetector (PD) based on a junction field-effect transistor (JFET) and a charge amplifier for the measurement of quantum noise in Bell-state detection (BSD). Particular photodiode junction capacitance allows the silicon N-channel JFET 2sk152 to be matched to the noise requirement for charge amplifier A250. The electronic noise of the PD is effectively suppressed and the signal-to-noise ratio (SNR) is up to 15 dB at the analysis frequency of 2.75 MHz for a coherent laser power of 50.08 µW. By combining of the inductor and capacitance, the alternating current (AC) and direct current (DC) branches of the PD can operate linearly in a dynamic range from 25.06 µW to 17.50 mW. The PD can completely meet the requirements of SNR and dynamic range for BSD in quantum optics experiments.

Frontiers of Information Technology & Electronic Engineering•Dec 27, 2023•6 citations

An ultra-sensitive balanced detector with low noise for continuous-variable quantum key distribution

Qi-Ming Lu, Qi Shen, Yuan Cao +2 more

A well-balanced detector with high sensitivity and low noise is presented in this paper. The two-stage amplification structure is used to increase electronic gain while keeping an effective bandwidth of about 70 MHz. In order to further reduce electronic noise, a junction field-effect transistor(JFET) is connected between photodiodes and transimpedance amplifier to reduce the impact of amplifier leakage current. Benefit from these designs, the root-mean-square(RMS) of noise voltage is about 6 mV with a gain of 3.2E5 V/W, and it means an ultra-low noise equivalent power density of 2.2E-12 W/rtHz, only half of common low-noise commercial detectors. In addition, two photodiodes in similar frequency response are selected for detector and make the common mode rejection ratio(CMRR) of detector reached 53 dB, about 13 dB higher than commercial detectors. Further tests indicate that 16.8 dB shot-noise to electronic-noise ratio is measured in our detector, which is better than most high speed balanced detectors.

arXiv:1806.03394•Jun 9, 2018•2 citations

Die-Level Balanced Homodyne Receiver for Squeezed Light Detection in the GHz Regime

Emmily Zaiser, Alessandro Trenti, Dinka Milovančev +3 more

Quantum receiver scalability and cost-effectiveness are crucial in the evolving quantum landscape. Application based on squeezed light (e.g. high-precision measurements and quantum communication), can profit especially from integrated and low-noise detectors. The presented die-level receiver is shown in figure 1 a) and combines a novel custom transimpedance amplifier (TIA) with commercial photodiodes (PDs) [1]. This offers a more scalable solution than bulk balanced homodyne detectors (BHDs) while being low-cost compared to fully customized receivers. This design targets a high bandwidth operation while maintaining low-noise properties for the detection of weak quantum signals. To characterize this receiver, we evaluate its performance through measurements of clearance, and common-mode rejection ratio (CMRR). Based on these parameters, a simulation for its performance in the squeezed light detection measurement is presented.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 23, 2025•1 citation

A Simple and Robust Balanced Homodyne Detector for High-Repetition-Rate Pulsed Sources

Samuele Altilia, Edoardo Suerra, Pietro Puppi +3 more

We design and experimentally characterize a balanced homodyne detector optimized for high-repetition-rate (100 MHz) pulsed optical sources. Unlike conventional transimpedance-amplifier architectures, which suffer from nonlinearities and dynamic instabilities with ultrashort pulses, our approach allows to directly amplify the photocurrent extracted at the common photodiode node without feedback loops. A theoretical model describing the detector response, noise, and pulse-to-pulse correlations is developed, providing quantitative predictions for the signal variance, signal-to-noise ratio (SNR), and inter-pulse correlations. Implemented with two matched InGaAs photodiodes illuminated by a 1030 nm mode-locked laser at 100 MHz, the detector exhibits excellent linearity and shot-noise-limited scaling of the signal variance with optical power. Optimizing the temporal integration window yields a maximum SNR of about 14 dB, while correlation measurements confirm negligible inter-pulse correlations. These results demonstrate that the proposed architecture offers a robust and simple solution for high-speed pulsed homodyne detection, suitable for quantum optics and continuous-variable quantum information applications.

physics.opticsCross-listedarXiv:2604.06994•Measurement Science and Technology•Apr 9, 2026•1 citation
The rapid development of coherent short-wavelength light sources in the extreme ultraviolet (EUV) and soft X-ray (SXR) regimes has created a growing need for advanced optoelectronic detection capabilities, particularly for quantum-noise-limited measurements, microelectronics and semiconductor metrology, and emerging quantum information applications. However, extending balanced photodetection to these wavelength regimes is severely hindered by a fundamental bandwidth-noise trade-off imposed by the exceptionally large junction capacitance of EUV-SXR silicon photodiodes. Here, we report a novel wideband photoreceiver architecture that overcomes this bottleneck via a bootstrapped transimpedance amplifier design. By leveraging a low-noise junction field-effect transistor interface, we effectively isolate the photodiode capacitance and suppress the apparent input capacitance seen by the core amplifier. Combined with active compensation of parasitic feedback reactance, this architecture mitigates the conventional trade-off between detector active area and signal bandwidth. Experimentally, we achieved a system-level input-referred noise floor of 13 fA/HzfA/\sqrt{Hz}fA/Hz​, closely approaching theoretical thermal limits. Furthermore, we achieved a six-fold extension in signal-to-noise limited bandwidth and, through the implementation of a novel grounded field plate, demonstrated a common-mode rejection ratio (CMRR) exceeding 30 dB up to 100 kHz. This highly scalable, silicon-based architecture effectively bridges the short-wavelength detection gap, establishing a robust experimental platform for next-generation quantum-noise-limited and quantum-enhanced X-ray measurement, as well as ultra-sensitive inspection and metrology applications in high-numerical-aperture EUV lithography.
We report a low-noise compensated tuned amplifier (cTAMP) architecture optimized for large-area photodiodes in stimulated Raman scattering (SRS) detection. By integrating a tunable RLC feedback network with a matching compensation inductor, the design simultaneously achieves resonance enhancement and amplifier stability despite the high junction capacitance of a 10 × 10 mm 2 photodiode. As a proof of concept, a detector configured for 20 MHz center frequency and 1 MHz bandwidth exhibits an output-referred noise floor of 31 nV / Hz , enabling shot-noise-limited linear operation from 0.1 mW up to 36 mW optical power under ∼50 μs time constant in the near-IR region. This wide dynamic range and low noise performance allow faithful characterization of high-power squeezed states that saturate conventional detectors, as verified in photon-number squeezing experiments. In addition, the detector facilitates biocompatible ultrafast SRS microscopy with milliwatt-level excitation, supporting hyperspectral live cell imaging without compromising sensitivity. These results establish the cTAMP-based detector as a versatile platform for high-sensitivity quantum optics and biomedical imaging, with potential for extension to other modulation-based optical measurements.
A low-noise, high-speed balanced homodyne detector is demonstrated, combining a capacitive-feedback transimpedance amplifier implemented in 28 nm CMOS with a custom photonic integrated circuit fabricated in imec's iSiPP200 silicon photonics platform. The receiver achieves a 3-dB bandwidth of 7.6 GHz, a maximum shot noise clearance of 27 dB, a shot noise-limited bandwidth of 13.7 GHz and a common-mode rejection ratio up to 54.8 dB. These results demonstrate the suitability of CMOS capacitive-feedback transimpedance amplifiers for demanding quantum and coherent sensing optical applications, including continuous-variable quantum key distribution, quantum random number generation, and optical coherence tomography.
We demonstrate a low-noise, high-gain, and large-dynamic-range photodetector (PD) based on a junction field-effect transistor (JFET) and a charge amplifier for the measurement of quantum noise in Bell-state detection (BSD). Particular photodiode junction capacitance allows the silicon N-channel JFET 2sk152 to be matched to the noise requirement for charge amplifier A250. The electronic noise of the PD is effectively suppressed and the signal-to-noise ratio (SNR) is up to 15 dB at the analysis frequency of 2.75 MHz for a coherent laser power of 50.08 µW. By combining of the inductor and capacitance, the alternating current (AC) and direct current (DC) branches of the PD can operate linearly in a dynamic range from 25.06 µW to 17.50 mW. The PD can completely meet the requirements of SNR and dynamic range for BSD in quantum optics experiments.
A well-balanced detector with high sensitivity and low noise is presented in this paper. The two-stage amplification structure is used to increase electronic gain while keeping an effective bandwidth of about 70 MHz. In order to further reduce electronic noise, a junction field-effect transistor(JFET) is connected between photodiodes and transimpedance amplifier to reduce the impact of amplifier leakage current. Benefit from these designs, the root-mean-square(RMS) of noise voltage is about 6 mV with a gain of 3.2E5 V/W, and it means an ultra-low noise equivalent power density of 2.2E-12 W/rtHz, only half of common low-noise commercial detectors. In addition, two photodiodes in similar frequency response are selected for detector and make the common mode rejection ratio(CMRR) of detector reached 53 dB, about 13 dB higher than commercial detectors. Further tests indicate that 16.8 dB shot-noise to electronic-noise ratio is measured in our detector, which is better than most high speed balanced detectors.
Quantum receiver scalability and cost-effectiveness are crucial in the evolving quantum landscape. Application based on squeezed light (e.g. high-precision measurements and quantum communication), can profit especially from integrated and low-noise detectors. The presented die-level receiver is shown in figure 1 a) and combines a novel custom transimpedance amplifier (TIA) with commercial photodiodes (PDs) [1]. This offers a more scalable solution than bulk balanced homodyne detectors (BHDs) while being low-cost compared to fully customized receivers. This design targets a high bandwidth operation while maintaining low-noise properties for the detection of weak quantum signals. To characterize this receiver, we evaluate its performance through measurements of clearance, and common-mode rejection ratio (CMRR). Based on these parameters, a simulation for its performance in the squeezed light detection measurement is presented.
We design and experimentally characterize a balanced homodyne detector optimized for high-repetition-rate (100 MHz) pulsed optical sources. Unlike conventional transimpedance-amplifier architectures, which suffer from nonlinearities and dynamic instabilities with ultrashort pulses, our approach allows to directly amplify the photocurrent extracted at the common photodiode node without feedback loops. A theoretical model describing the detector response, noise, and pulse-to-pulse correlations is developed, providing quantitative predictions for the signal variance, signal-to-noise ratio (SNR), and inter-pulse correlations. Implemented with two matched InGaAs photodiodes illuminated by a 1030 nm mode-locked laser at 100 MHz, the detector exhibits excellent linearity and shot-noise-limited scaling of the signal variance with optical power. Optimizing the temporal integration window yields a maximum SNR of about 14 dB, while correlation measurements confirm negligible inter-pulse correlations. These results demonstrate that the proposed architecture offers a robust and simple solution for high-speed pulsed homodyne detection, suitable for quantum optics and continuous-variable quantum information applications.