arXiv:2609.37671
Integrated balanced homodyne detector using CMOS capacitive-feedback TIA for quantum measurements
Sarah Bastiaens, Cedric Bruynsteen, Simone Cammarata, Axl Bomhals, Leandro da Silva, Michiel Van Osta, Johan Bauwelinck, Xin Yin
Abstract
A low-noise, high-speed balanced homodyne detector is demonstrated, combining a capacitive-feedback transimpedance amplifier implemented in 28 nm CMOS with a custom photonic integrated circuit fabricated in imec's iSiPP200 silicon photonics platform. The receiver achieves a 3-dB bandwidth of 7.6 GHz, a maximum shot noise clearance of 27 dB, a shot noise-limited bandwidth of 13.7 GHz and a common-mode rejection ratio up to 54.8 dB. These results demonstrate the suitability of CMOS capacitive-feedback transimpedance amplifiers for demanding quantum and coherent sensing optical applications, including continuous-variable quantum key distribution, quantum random number generation, and optical coherence tomography.
AI Summary
The paper investigates whether a capacitive-feedback transimpedance amplifier (TIA) in advanced CMOS can support low-noise, multi-GHz balanced homodyne detection. It combines a 28 nm CMOS TIA with a separate silicon-photonics chip containing tunable interferometers and balanced photodiodes, connected by short wirebonds. Capacitive feedback avoids feedback-resistor thermal noise; an on-chip DC-cancellation circuit and an external analog loop controlling interferometer heaters address photocurrent imbalance. Analytical transfer-function and noise models are compared with circuit simulations and a shunt-feedback topology at equal DC gain. Measurements characterize standalone electrical response, assembled optoelectrical response, output noise versus photocurrent, and common-mode rejection. The assembled receiver has a $7.6\,\mathrm{GHz}$ 3-dB bandwidth, maximum shot-noise clearance of $27\,\mathrm{dB}$ at $220\,\mathrm{MHz}$ and $2.2\,\mathrm{mA}$ photocurrent, and a shot-noise-limited bandwidth of $13.7\,\mathrm{GHz}$. Common-mode rejection spans $31$–$54.7\,\mathrm{dB}$ over $10\,\mathrm{MHz}$–$5\,\mathrm{GHz}$. The TIA consumes approximately $45\,\mathrm{mW}$; standalone measurements give $76.2\,\mathrm{dB}\Omega$ transimpedance gain at $220\,\mathrm{MHz}$ and $3.9\,\mathrm{GHz}$ bandwidth. Stated limitations include sensitivity of capacitive feedback to DC currents, added input noise and low-frequency suppression from DC cancellation, and reduced supply rejection of the inverter-based amplifier. The topology comparison predicts a noise advantage only below a crossover frequency, above which shunt feedback performs better. Packaging parasitics produce a notch in the measured optoelectrical response. Proposed quantum-communication and sensing applications are not demonstrated.
Written by gpt-6.1-sol from the paper's full text. Automated: it can be wrong.
- Comments
- This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible